32-63A RACK-MOUNT ROTARY BYPASS SWITCH
32-63A RACK-MOUNT ROTARY BYPASS SWITCHINSTALLATION MANUALRBQS00062REV1
INTRODUCTION Contents Introduction Electrical Connections Operation Electrical Drawings Technical Specification32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
INTRODUCTIONThank you for purchasing the RMBS, this is a 19inch rack-mounted unit specifically designed to allow isolation and removal UPS equipment, without causing interruption to the supply of power to connectedloads.Please read this manual thoroughly and follow the instructions carefully. Before attempting to install oruse the RMBS, familiarize yourself with the RMBS and its operation.Warning exposure to hazardous voltages may occur if the installation procedure is not followed.It is recommended that installation of this product is carried out by a qualified electricianWARNING!HAZARDOUS VOLTAGES MAY BE PRESENT WITHIN THIS UNITTHIS UNIT IS SUPPLIED FROM MULTIPLE SOURCES, ENSURE ALL SOURCES AREISOLATED BEFORE COMMENCING WORKWARNING!BEFORE OPERATION OF THIS BYPASS SWITCHENSURE THE UPS IS IN NORMAL OPERATION AND NOT IN BATTERY MODEREFER TO UPS USER MANUALWARNING!INCORRECTION OF OPERATION OF THIS SWITCH MAY RESULT IN DAMAGE TOTHE UPS AND/OR INTERUPTION OF LOADFOLLOW SWITCHING INSTRUCTIONS CAREFULLY32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
ELECTRICAL CONNECTIONSWARNING!HAZARDOUS VOLTAGES MAY BE PRESENT WITHIN THIS UNITTHIS UNIT IS SUPPLIED FROM MULTIPLE SOURCES, ENSURE ALL SOURCES AREISOLATED BEFORE COMMENCING WORKConnection of Mains SupplyFeed the Mains Supply cable through the gland on the rear cover and secure. Terminate the cables in theterminals marked Mains on the cover plateConnection of the Input to the UPSFeed the UPS Input cable through the gland on the rear cover and secure. Terminate the cables in theterminals marked UPS In on the cover plateConnection of the Output from the UPSFeed the UPS Output cable through the gland on the rear cover and secure. Terminate the cables in theterminals marked UPS Out on the cover plateConnection of the Load EquipmentFeed the Load cable through the gland on the rear cover and secure. Terminate the cables in theterminals marked Load on the cover plate32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
O P E R AT I O NInitial Switch OnEnsure all connections are correctEnsure the rotary switch in the 'NORMAL' positionEnsure the rotary switch cover plate is attached firmly in placeSwitch on the AC supply to the RMBSThe UPS should now begin its start-up procedureFollow the instructions detailed in the UPS user manual to confirm UPS is operating correctlyTransfer From UPS to Bypass Operation For Maintenance and TestingWARNINGENSURE THE UPS IS IN NORMAL OPERATION AND NOT IN BATTERY MODEREFER TO UPS USER MANUALRemove the rotary switch cover plate using the two thumb screwsIf the interlock connections have been installed the UPS should automatically transfer to internal UPS bypass. If however they have not been installed, then follow the UPS instructions to transfer the UPS to internal bypass operation.Check the UPS display to ensure the unit is in internal bypass operationRotate the switch to the 'UPS Bypass' position, the load is now powered by the RMBSThe UPS still has mains supply voltage present for testing purposes32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
O P E R AT I O NTransfer From UPS to Bypass Operation For Maintenance with Complete Isolation of theUPSRemove the rotary switch cover plate using the two thumb screwsIf the interlock connections have been installed the UPS should automatically transfer to internal UPS bypass. If however they have not been installed then follow the UPS instructions to transfer the UPS to internal bypass operation.Check the UPS display to ensure the unit is in internal bypass operationRotate the switch to the 'UPS Bypass' position, the load is now powered by the RMBSTo isolate the UPS rotate the switch to the 'Bypass' position, the UPS input/output connections are nowisolatedTransfer From Bypass to UPS OperationWARNINGLOAD IS ONLY FULLY PROTECTED WHEN THE ROTARY SWITCH IS IN THE UPSPOSITION AND THE UPS IN IN NORMAL ONLINE OPERATIONRemove the rotary switch cover plate using the two thumb screwsRotate the switch from ‘Bypass’ position to ‘Bypass UPS’ positionThe UPS Should now begin start-up procedure (refer to UPS user manual for switch on instructions)ENSURE the UPS is in internal bypass operationRotate the switch to the 'UPS’ positionTransfer the UPS to normal online operation (refer to UPS user manual)The load is now supplied by the UPS32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
ELECTRICAL DRAWINGS32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
TECHNICAL S P EC I F IC AT I O NDIMENSIONS32-63A RACK-MOUNT ROTARY BYPASS SWITCHRBQS00062REV1
The UPS Should now begin start-up procedure (refer to UPS user manual for switch on instructions) ENSURE the UPS is in internal bypass operation Rotate the switch to the 'UPS’ position Transfer the UPS to normal online operation (refer to UPS user manual) The load is now supplied by the UP
10 Hoop Rack Hoop Rack Heavy Duty Round Rack Arc Rack 11 Swerve Rack Bike Hitch Downtown Rack 12 Bike Bike Rack Cycle Dock 13 Helix Rack Hi Roller Campus Rack Rolling Rack CUSTOM BIKE RACKS 14 Full Custom Designs Image Infusion 15 Logo Racks Icon Hitch Type Rider Racks SPECIALTY RACKS 16 Event Rack Compack R
a Pelican-Hardigg Rack Mount Case. From the ultimate protection of the Classic Rack case, to the removable rack option offered by the SuperMAC Rack case, to the smaller footprints of the MAC Rack
2.0 RACK MOUNT INSTALLATION 1. Rack mount installation of the 3U POD is possible with the use of the rack mounting brackets (shipped with the 3U POD). See Figure 4. 2. The rack mounting brackets allow you to rack mount the 3U POD in a 19" enclosure (23" to 19" rack adapters would ha
www.symetrix.co 4 1/2 Rack Mounting Hardware and Cables 1/2 U Filler Panel Filler Panel Used with 19" 1U Rack Tray. 32 1/2 U Surface Mount Bracket Bracket for Surface-mounting Half-rack Units. 32 1 U Rack Tray 19" Rack Tray for Rack Mounting of Half-rack Units. 33 RCA to Euroblock Cable Adapter Cable for Consumer Devices like CDs and DVD Players. 33
1.75kg (3.86 lb.) 40A - 63A 2.07kg (4.56 lb.) Standard Pack: 6 Weight: 0.3A - 32A 1.75kg (3.86 lb.) 40A - 63A 2.07kg (4.56 lb.) Standard Pack: 4 Weight: 0.3A - 32A 1.75kg (3.86 lb.) 40A - 63A 2.07kg (4.56 lb.) Standard Dual Connection Terminal Box clamp terminals Top: 18-3 AWG; Bottom: 1
4.2 6 General Requirements Kantara note - see SP 800-63-3 definition of 'Authoritative Source'. ü 63A#0080 b) for each type of identity proofing offered (see 63A#0260), state which issuing and authoritative sources are used to prove identities; ü In scope - Applicable The CSP SHALL prov
Power distribution for rack-mount equipment APC offers a wide variety of Basic Rack Power Distribution Units (PDUs) that distribute power to rack-mount equipment. Horizontal and vertical units are available, as well as a variety of power inputs and outputs that fit most power environ-ments. APC now offers Basic Rack PDUs that mount vertically,
APC Smart-UPS Rack-Mount 2U User Manual Home » APC » APC Smart-UPS Rack-Mount 2U User Manual User Manual Smart-UPS Modular 1500/3000 VA 120/230 Vac Rack-Mount 2U Contents [ hide 1 Important Safety Messages 2 Product Handling Guidelines 3 Safety and General Information 4 Product Overview 5 Package Contents 6 Start-Up 7 Basic Operation
