ANCHOR LIGHT FOR POWER BOATS
DATASHEET200-021 – 3NM 225 / 135 /360 WHITE MASTHEAD, STERN ANDANCHOR LIGHT FOR POWER BOATSThe LED light consists of 3 rows of LEDs thatproduces light in the specified angles.The precision machined 6082 aluminium housingwith a hard coated anodized surface makes thelight a rugged and durable housing for the LEDsand electronics contained within, and the polishedPMMA lens delivers a clear light with colour rangingthat is well within the standard for maritime use.Lastly all the interior is completely filled with aspecial potting resin making it water- and vibrationproof before each light is subjected to final testingfor no less than 16 hours of continuous operationbringing the total test period beyond 24 hours.Lopolight products are covered by a 5-year limitedwarranty. This warranty covers direct exchange ofthe malfunctioning product and is given under theassumption that the lights have been operatedwithin the specifications of lights.0038LOPOLIGHT ApS Bakkegaardsvej 513 DK-3050 Humlebaek Denmarkinfo@lopolight.com Tel. 45 32485030 Fax. 45 3258 3052
DATASHEETTechnical specificationsVessel size:Masthead: 12m - 20m (39.4’ – 65.6’)Stern/anchor: 0 - 50m (0’ – 164’)Visibility: 3 nautical miles/ 3 nautical milesIntensity:Masthead: 15cdStern/Anchor: 15cdMounting: Horizontal, see the K-Lock system sheet for optionsOperating voltage: 10 - 32 V DCNumber of LEDs: 54Light colour: WhiteOperating temperature: -25 C to 55 CIP rating: IP68Power consumption;Masthead: 3,3 Watt; Current @ 12 VDC: 0,28A - Current @ 24 VDC: 0,14ACombined: 4,2 Watt; Current @ 12 VDC: 0,35A – Current @ 24 VDC: 0,18AConnection: 1 cable consisting of 3 x 0,5 mm2 leads, a screen and insulation. Red lead Masthead power White lead Combined masthead and stern / anchor power Black lead GNDCertification: The product is certified by Lloyds (LR) and certificates can be found onwww.lopolight.com under certificates.Approvals: COLREG72/ EN14744 / IEC 60945 / USCG/ UL1104Dimensions: See drawingWeight: 0,48kgIncluded in package: 1 Navigation light, pre-cabled with 0,7m marine grade cable 3 Mounting screws (M4 x 30 mm) Installation instructionsLOPOLIGHT ApS Bakkegaardsvej 513 DK-3050 Humlebaek Denmarkinfo@lopolight.com Tel. 45 32485030 Fax. 45 3258 3052
ABCDEFGHIJ124,046,016,01232Note:The PE Plastic base is intended for fitting on site and can be either drilled formounting screws from above or drilled and tapped from below. 6mm machine screwswith nuts and washers are recommended for secure mounting.344135 WhiteDouble Function Stern and Anchor19,05592,5066200-021, 3 nm Steaming light & 2 nmanchor, PE base, Cable Down.7DRAWING NO.:This Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A38BLopolight ApSDRAWN BY:SIZE:Sergio0A3200-021ABVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 DenmarkAlu EN 6082, Acrylic, PE.(50 ) Black anodized according to MIL-A 8625F225 White Anchor OnlyAREV. NO.:7CDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ116,01252,574,52334412081,6014,0135 WhiteDouble Function Stern and Anchor514,05692,501M6xHolegntin DEEPuoM 0mm,- 106200-021, 3 nm Steaming light & 2 nmanchor, 400-034 Promount, Cable Down.7DRAWING NO.:REV. NO.:7Lopolight ApSDRAWN BY:SIZE:Sergio0A3200-021BBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 Denmark(50 ) Black anodized according to MIL-A 8625FAlu EN 6082, Acrylic.8225 White Anchor OnlyABThis Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A3CDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ116,01252,574,52321,031204481,60135 WhiteDouble Function Stern and Anchor5M6x15HolegnitnMouEPmm DE0,01-6692,5040200-021, 3 nm Steaming light & 2 nmanchor, 400-034 Promount, Cable Side.7DRAWING NO.:REV. NO.:7Lopolight ApSDRAWN BY:SIZE:Sergio0A3200-021CBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 Denmark(50 ) Black anodized according to MIL-A 8625FAlu EN 6082, Acrylic.225 White Anchor OnlyThis Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A38ABCDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ116,01266,588,5239,53135 WhiteDouble Function Stern and Anchor44120oleHgntin RUuoMTH6,1514,05130,06111,2eHolgntin 1 THRUuoM6,92,5(1:2)14,0200-021, 3 nm Steaming light & 2 nmanchor, 400-034 Promount, 400-404 PEBase Plate, Cable Down.7DRAWING NO.:REV. NO.:7Lopolight ApSDRAWN BY:SIZE:6Sergio0A3200-021DBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 DenmarkAlu EN 6082, Acrylic, PE.(50 ) Black anodized according to MIL-A 8625F8225 White Anchor OnlyABThis Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A3CDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ116,01266,588,52335,03135 WhiteDouble Function Stern and Anchor445120HoleMounting6,1 THRU5Mounting Hole6,1 THRU111,292,566(1:2)130,040200-021, 3 nm Steaming light & 2 nmanchor, 400-034 Promount, 400-404 PEBase Plate, Cable Side.7DRAWING NO.:REV. NO.:7Lopolight ApSDRAWN BY:SIZE:Sergio0A3200-021EBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 DenmarkAlu EN 6082, Acrylic, PE.(50 ) Black anodized according to MIL-A 8625F8225 White Anchor OnlyABThis Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A3CDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ116,01252,574,52323,5344120135 WhiteDouble Function Stern and Anchor92,5081,60514,05HolegnEPntiMou 0mm DE- 8,1xM6614,06200-021, 3 nm Steaming light & 2 nmanchor, 400-035 Promount, Cable Down.7DRAWING NO.:This Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A38BLopolight ApSDRAWN BY:SIZE:Sergio0A3200-021FBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 Denmark(50 ) Black anodized according to MIL-A 8625FAlu EN 6082, Acrylic.225 White Anchor OnlyAREV. NO.:7CDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ116,01266,588,5239,514,03135 WhiteDouble Function Stern and Anchor44120g HoleMountin U6,1 THR111,20514,0592,5066130,00(1:2)14,0200-021, 3 nm Steaming light & 2 nmanchor, 400-035 Promount, 400-401 AluBase Plate, Cable Down.7DRAWING NO.:REV. NO.:7Lopolight ApSDRAWN BY:SIZE:Sergio0A3200-021GBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 Denmark(50 ) Black anodized according to MIL-A 8625FAlu EN 6082, Acrylic.8225 White Anchor OnlyABThis Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A3CDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
ABCDEFGHIJ1214,036,0216,0133H4135 WhiteDouble Function Stern and Anchor84,604Mounting Hole4,4 THRU5592,50726H(1:1)6200-021 3nm Steaming light w/ 2nm anchorlight on a low profile base7225 White Anchor OnlyDRAWING NO.:REV. NO.:Lopolight ApSDRAWN BY:SIZE:7Sergio0A3200-021HBVed Klaedebo 12REVIEWED BY: CREATION DATE:SCALE:TOLERANCES:09-01-2017 DK-2970, HoersholmDS/ISO 2768-f1:1MATERIAL DESCRIPTION:(20 ) Silver anodized according to EN ISO 7599 Denmark(50 ) Black anodized according to MIL-A 8625FAlu EN 6082, AcrylicThis Drawing, and the information within, is the property of Lopolight ApS and may not beused in any form without express permission there from. Lopolight reserves the right tochange this drawing and assumes no liability for the information communicated herein.Use of dimensions and other information in this drawing is at the users own risk.50MM AT A38ABCDEFGHTel:( 45) 32 48 50 30info@lopolight.comIwww.lopolight.comFax:( 45) 32 48 50 328J
DS/ISO 2768-f CREATION DATE: 09-01-2017 (20q) Silver anodized according to EN ISO 7599 (50q) Black anodized according to MIL-A 8625F 225n White Anchor Only 135n White Double Function Stern and Anchor Note: The PE Plastic base is i
Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original
10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan
service i Norge och Finland drivs inom ramen för ett enskilt företag (NRK. 1 och Yleisradio), fin ns det i Sverige tre: Ett för tv (Sveriges Television , SVT ), ett för radio (Sveriges Radio , SR ) och ett för utbildnings program (Sveriges Utbildningsradio, UR, vilket till följd av sin begränsade storlek inte återfinns bland de 25 största
Hotell För hotell anges de tre klasserna A/B, C och D. Det betyder att den "normala" standarden C är acceptabel men att motiven för en högre standard är starka. Ljudklass C motsvarar de tidigare normkraven för hotell, ljudklass A/B motsvarar kraven för moderna hotell med hög standard och ljudklass D kan användas vid
LÄS NOGGRANT FÖLJANDE VILLKOR FÖR APPLE DEVELOPER PROGRAM LICENCE . Apple Developer Program License Agreement Syfte Du vill använda Apple-mjukvara (enligt definitionen nedan) för att utveckla en eller flera Applikationer (enligt definitionen nedan) för Apple-märkta produkter. . Applikationer som utvecklas för iOS-produkter, Apple .
INSTALLING ANCHOR WINCH ON BOAT DECK The anchor winch can be installed on the fore or aft of the boat. To install the anchor winch, follow these steps: 1. Locate the winch on deck in desired location. The anchor roller must extend over the edge to allow the anchor to clear the deck when it is docked in the anchor roller. 2.
of the torpedo anchor and deep penetrating anchor. Ehlers et al. (2004) have suggested that the following anchors are suitable for taut-leg mooring of deepwater floating systems where the anchor has to withstand significant pull-out forces: suction caisson anchor, vertically loaded anchor, suction embedded plate anchor and torpedo anchor.
anchor is flush with, or below, the level of the work surface. 4. Insert the setting tool into the threaded end of the anchor and expand the anchor by striking the end of the setting tool with a hammer. The anchor is set (fully expanded) when the shoulder of the setting tool touches the anchor. Full expansion is necessary for proper anchor .
