SWIVEL FLANGES Class 300 Flanges Class 600 Flanges Class 900 Flanges Class 1500 Flanges
CLASS 300 FLANGESUnit : mmNominal Outside InsideDia. Of Dia. Of Dia. OfFlange Flange FlangeOID(INCH)(mm) (mm)Sectional Dimensions of flangeDia ofBoltClirclePCD(mm)Dia.ofRaisedPFace(mm)RF OD(mm)Dia.of oleber 69.950.811.211.266.833.453.88.746.3519.14R160.81 9.14R180.81 .917.9219.18R230.82 7.311.917.9222.28R310.83 8R971.53612701168.41092.2 .873.4305.81219.21305.919.8412.754401.5To be Customer.1/2FLANGES - 92Rev. 4. 0 / 2018. 07. 27
SWIVEL FLANGESCLASS 600 FLANGESUnit : mmSectional Dimensions of flangeNominal Outside Dia ofDia. Of Dia. OfBoltFlange Flange ClircleOPCDDia.ofRaisedFaceRF ODDia.of HubPTH1TH2YARadiusRHUB 1.5361314.51193.81092.2 5Rev. 4. 0 / 2018. 07. 27FLANGES - 93
CLASS 900 FLANGESUnit : mmSectional Dimensions of flangeOutsideNominalDia. Of Dia ofDia. OfBoltFlangeFlangeClircleOPCDDia.of HubDia.ofRaisedFaceRF ODPTH1TH2YARadiusRHUB .41032.51336.5320.6292.1201052.3FLANGES - 94Rev. 4. 0 / 2018. 07. 27
SWIVEL FLANGESCLASS 1500 FLANGESUnit : mmSectional Dimensions of flangeOutsideNominalDia. Of Dia ofDia. OfBoltFlangeFlangeClircleOPCDDia.ofRaisedFaceRF ODDia.of HubPTH1TH2YARadiusRHUB 92.116792.3Rev. 4. 0 / 2018. 07. 27FLANGES - 95
FLANGES Rev. 4. 0 / 2018. 07. 27 FLANGES - 93 Nominal Dia. Of Flange Sectional Dimensions of flange Outside Dia. Of Flange O Dia of Bolt Clircle PCD Dia.of Raised Face RF OD P TH1 TH2 Y Dia.of Hub Radius R F E Hole Dia H Number of Bolt Holes N RING NO R1 A HUB OD 8 419.1 349.3 301.8 269.8
RF GORE DIN Swivel flanges Fixed flanges Flange gasket Swivel flanges Fixed flanges Flange gasket. FLANGES DIMENSIONS EN-DIN PN ASTM EN-DIN PN 6 EN-DIN PN 10 EN-DIN PN 16 EN-DIN PN 25 EN-DIN PN 40 ND D K N D2 D K N D2 D K N D2 D K N D2 D K N D2 1/2" 15 80 55 4 11 95 65 4 14 95 65 4 14 95 65 4 14 95 65 4 14
707 SW 19th Ave. Williston, FL 32696 1-800-FLANGE1 352-528-4100 www.ancorp.com 5 QF63 Flanges QF80 Flanges QF100 Flanges QF160 Flanges QF200 Flanges ANCORP now offers quick flanges up to size QF200 (8 inch tube outer diameter). ISO standards only
MOUNTING INSTRUCTIONS SWIVEL MOUNT INSTALLATION 1) Secure the Swivel Ball to the base of the controller using the #10 screw. 2) Attach the swivel ball to the swivel bracket base using the #10 screw. 3) Using the #10 screw, secure the two clamps loosely together. 4) Place the clamps and screw around the 2 swivel balls. Tighten the clamp screw, thereby attaching the swivel
Flanges CL150 ASME B16.5 Note 1: Socket weld flanges up to 3" in this pressure rating. Note 2: For Lapped flanges, add 1.6mm to tf dimension. Note 3: Threaded Flanges shall have a taper pipe thread conforming to ASME B1.20.1 Pipe Refer to ASME B36 - 10 / B36 - 19 or as specified by purchaser No counter bore required on threaded flanges .
Metallic butterfly valves BS EN 1092-1:2007 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges BS EN 12516:2005 Series Industrial Valves .
imported from FMC swivel joints. Swivel joints are divided into short and long radius swivel joints. Long radius swivel joints can minimize fluid resistance and have better performance in corrosion resistance than short radius ones due to their smooth bore. But short radius swivel joints are needed where the working space is limited.
the swivel joint measured in pounds per square inch (psi). The higher the resistance to flow, the greater the loss of efficiency. Eaton swivel joints have been designed for minimal resistance to flow. 7. Torque: Defined as the force that produces a rotation, torque is an important consideration when specifying swivel joints. Eaton swivel joints
allows the swivel joints to rotate with very low torque—even up to their fully rated operating pressure. The FS65 is available in sizes 1/4 - inch to 1 - inch. The swivel joints and 3,000 PSI for the 1-inch size. Swivel Joints FS6500 Pressure Drop vs Flow FS65 Series Swivel Joints passed the minimum requirements of ing zero leakage per SAE .