QUICK ACCESS FASTENERS - Clancey
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESOnlineConfiguration.www.clancey.com High vibration solution. Broadest 1/4 turn grip range.DZUS 1/4 TURN FASTENERSSTANDARD LINEThis is the series that started it all. Excellentproduct that delivers predictable clamping force andis well suited for high vibration applications. High loadstrength, cycle life and a broad grip range make thestandard line an excellent choice. High tensile and shear strength. Variety of actuation styles and sizes.PANEX LINEExcellent choice for applications in these industries. Off-highway vehicles HVAC Lighting MotorcyclesThe rapier line is manufactured on automatedequipment to exacting standards. The result is aneconomical fastener for volume applications. A widevariety of stud diameters and receptacles allows therapier line to be easily engineered into a large range ofapplication environments.www.clancey.com 1-800-747-7405RAPIER LINEQUICK ACCESS, 1/4 TURN FASTENERS Tool driven. Economical choice for high volume applications.177
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESHOW TO SELECT A SOUTHCO QUARTER-TURN FASTENER Interactive product configuration at www.clancey.com.1. Select a receptacle (note frame thickness limitations).2. Select a ey.coma) Measure your outer panelthickness or total materialthickness.Note: Receptacle selectionwill determine whichmeasurement you will use.b) If there is an adjustment formula under receptacle, apply the adjustment formula toyour measurement.c) If you are using the wear washer or ejector spring option, apply the adjustment toyour measurement.d) Choose a head style and use your adjusted measurement to select a stud which will workin your application.3. Select a retainer.SmallMediumLargeQUICK ACCESS, 1/4 TURN FASTENERS4. Order your components.178STANDARD ASSEMBLYSTUD EJECTORRequired Stud Retainer ReceptacleOptional Wear washer Ejector spring ToolsPLEASE NOTE:Quarter-turn fastener assemblies have narrow toleranceranges. If tolerance control is a problem, please considera fast-lead screw assembly.www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIES 5 receptacle styles. Stainless steel options available.SMALL SERIES, RECEPTACLESSHIELDED PRESS-IN FOR SHEET METALPART NUMBER81-35-311-55 Provides RFI/EMI shieldingSTUD SELECTION Use column II in stud selection table. Use constant 1.3 mm (.050") forframe thickness if frame thickness isless than 1.3 mm (.050").Material:Shell:SteelSpring: Stainless steelTOOL PART NUMBER54-0-5466-11PRESS-IN FOR BLIND APPLICATIONS AND SOLID MATERIALSPART NUMBER81-35-308-55STUD SELECTION Determine outer panel thickness. Use column I in stud selection table.Material:Shell:SteelSpring: Stainless steelPART NUMBER81-35-310-55STUD SELECTION Determine total material thickness. Use column I in stud selection table.Material:Shell:SteelSpring: Stainless steelwww.clancey.com IONQUICK ACCESS, 1/4 TURN FASTENERSFOR ULTRASONIC INSTALLATION IN THERMOPLASTICS179
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESSMALL SERIES, RECEPTACLESPANEL PREPARATIONCLIP-ON STYLEPart DescriptionPART NUMBER1064 STEEL,DACROTIZED†17-7 PHstainless steel81-47-101-1581-47-101-20STUD SELECTION Determine total material thickness. Use column II in stud selection table.TO INSTALLBy handINSTALLATION TOOLFigure IP F -1.07 (.042)(constant) when Gis 0.45 (.018).PART NUMBERWith screwdriver29-81-101-10Figure IIP F G -1.5(.060) (constant)when G is 0.46(.019) or greater.With toolSNAP-IN STYLEPART NUMBERQUICK ACCESS, 1/4 TURN FASTENERS81-35-309-56180STUD SELECTIONINSTALLATION TOOLPART NUMBER Add 1.5 mm (.060") to outer panelthickness. Use column II in stud selection table.Material:Housing and retainer: 301 stainless steelReceptacle:1010 steel, zinc plateSpring:302 stainless steel,passivated29-8125-309www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIES Interactive configuration at www.clancey.comQuick access fastener assembly.4 head styles.5 receptacle styles.For limited space applications.OVAL SLOTTEDWING HEADSMALL SERIES, STUD SELECTION TABLEOVALFLUSHPHILLIPS RECESS PHILLIPS RECESSOVAL SLOTTEDWING HEAD ",\-/1 Ê* ,/Ê 1 ,- " - ",\*ÀiÃÃ Ê* ÀÌÊ n Îx Îän xx 1 ÌÀ Ã VÊ* ÀÌÊ n Îx Î ä xx "/ ,,*/ -:INC PLATECHROMATE PLUS SEALER#ASE HARDENED ANDZINC PLATECHROMATE PLUS SEALER 1"ÕÌiÀÊ* i / V iÃÃ/ Ì Ê ÌiÀ / V iÃÃ"6 - "//7 "6 1- * *- * *,-- ,-- 8 8 www.clancey.com 1-800-747-7405FLUSHPHILLIPS RECESSQUICK ACCESS, 1/4 TURN FASTENERS OVALPHILLIPS RECESS181
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESSMALL SERIES, RETAINERSSPLIT RINGINSTALLATION TOOLStainless SteelPUSH-ONPART NUMBERPART NUMBER81-32-101-2081-0-15129-11RETAINERTOOLPART NUMBERPART NUMBER81-32-301-1281-0-18173-11INSTALLATION TOOLNylon, BlackWEAR WASHERSMALL SERIES, ACCESSORIESAdjustmentEJECTOR SPRINGQUICK ACCESS, 1/4 TURN FASTENERS Wear washer and ejector springadd .8 mm (.032") to outer panel ortotal material thickness. Wear washeradd .5 mm (.020") to outer panel ortotal material thickness.182NylonPART NUMBERStainless SteelEJECTORSPRING81-41-102-24WEAR WASHERBlackNatural81-46-101-4181-46-101-39* Accessories cannot be used with flush phillips head style.SMALL SERIES, PANEL PREPARATIONFOR FLUSH-HEAD STYLEFOR ABOVE-SURFACE STYLESDrill or PunchCountersinkDrill or Punchwww.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESLEAF SPRING RECEPTACLESMEDIUM SERIES, RECEPTACLESFOR RIVETING - WITH BASEPART NUMBER82-35-302-15STUD SELECTION Determine total material thickness. Use column IV in stud selectiontable.Material:Spring: 1064 steelBracket: 1010 steelSIDE MOUNTPART NUMBER82-45-101-15STUD SELECTION Calculate D 1.5 mm (.060"). Use column IV in stud selectiontable.Material:Spring: 1064 steelBracket: 1010 steelFOR RIVETING - WITHOUT BASEPART NUMBERSteelStainless Steel82-35-295-1582-35-295-20STUD SELECTION Determine total material thickness. Use column IV in stud selectiontable.FOR WELDINGPART NUMBER82-35-303-15STUD SELECTION Determine total material thickness. Use column IV in stud selectiontable.Material:Spring:1064 steelBase:1010 steelWeld studs: Steel, copper platewww.clancey.com 1-800-747-7405QUICK ACCESS, 1/4 TURN FASTENERSMaterial:Spring: 1064 steel or 17-7 stainlessEyelet: Steel or 302 stainless183
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESMEDIUM SERIES, RECEPTACLESFOR ULTRASONIC INSTALLATIONIN THERMOPLASTICSPRESS-IN FOR BLIND APPLICATIONS ANDSOLID MATERIALSPART NUMBERPART NUMBERwith 9082-35-308-55locking stopswithout 9082-35-313-55locking stops82-35-302-15Material:Shell: SteelSpring: Stainless steelMaterial: Shell: SteelSTUD SELECTION Determine outer panel thickness. Use column II in stud selection table.Spring: Stainless steelSTUD SELECTION Calculate D 1.5 mm (.060"). Use column IV in stud selection table.PANEL PREPARATIONBlind HoleApplicationThrough HoleApplicationVIBRATION ISOLATINGSHIELDED PRESS-INPART NUMBERPART NUMBER82-35-306-10QUICK ACCESS, 1/4 TURN FASTENERS82-35-315-55184Material:Shell: SteelSpring: Stainless steelSTUD SELECTION Determine total material thickness. Substitute 1.3 mm (.051") for frame thicknessif thickness is less than 1.3 mm (.051"). Use column III in stud selection table.PANEL PREPARATION1. Drill or punch hole ininner panel.2. Press receptacle into holeuntil the shoulder on thereceptacle bottoms out onthe panel’s surface.STUD SELECTION Determine outer panel thickness. Use column I in stud selectiontable.Material:Receptacle: SteelPlate:AluminumBoss:Neoprene*Note: for inner panels less than 1.3 (.051) thick, the retainer will create aslight gap between the panels. For proper stud selection in these cases,assume the inner panel thickness as 1.3 (.051).www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESMEDIUM SERIES, RECEPTACLESTry this part inyour applicationPlease call for samples.SNAP-IN STYLE800-747-7405PART NUMBER82-35-309-56STUD SELECTION Calculate outer panel thickness 5.08 mm (.200"). Use column IV in stud selectiontable.PANEL PREPARATIONINSTALLATION TOOLPART NUMBER29-8125-309Material:Housing and retainer: StainlessReceptacle:SteelSpring:StainlessCLIP-ON STYLEPANEL PREPARATIONPART NUMBERSteel82-47-113-15Stainless Steel82-47-113-20STUD SELECTION Enter result in column IV of studselection table.P F 1.40 (.055) (constant) whenG is 0.64 (.025) .INSTALLATION TOOLFigure IIP F G 0.76 (.030) (constant)when G is 0.65 (.026) or greater.www.clancey.com 1-800-747-7405* ,/Ê 1, ÊQUICK ACCESS, 1/4 TURN FASTENERSFigure I185
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESMEDIUM SERIES, RETAINERSPART NUMBER82-32-101-20PART NUMBERPART NUMBER82-32-201-2082-32-301-12304 Stainless Steel,passivated.Nylon, black.302 Stainless Steel,passivated.INSTALLATION TOOLINSTALLATION TOOLPART NUMBERPART NUMBER82-0-22542-1182-0-7595-11MEDIUM SERIES, ACCESSORIESQUICK ACCESS, 1/4 TURN FASTENERSNYLON WEAR WASHERSCUPPEDFLAT186PART NUMBERPART 3-39NaturalEJECTOR SPRINGPART NUMBER43-13-1-24302 Stainless steel,passivated.AdjustmentAdjustment Add .5 mm (.020") to your outer panelthickness or total material thickness. When using an ejector spring and wear washer add1 mm (.040") to your outer panel thickness or totalmaterial thickness.SEALING WASHERSPART NUMBER82-43-201-38Nitrile fibre core rubber, black.Adjustment Add .5 mm (.020") to your outer panelthickness or total material thickness.www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIES Interactive configurator at www.clancey.com9 head styles.Spring loaded fully retractable assemblies are available.Stainless steel available in many styles.OVAL SLOTTEDWING HEADwww.clancey.comwww.clancey.com 1-800-747-7405HEX SOCKETOVAL PHILLIPSFLUSH PHILLIPSPANEL PREPARATION - ABOVE SURFACE STYLESDrill or PunchQUICK ACCESS, 1/4 TURN FASTENERSLow profile headstyles are available instainless steel:change suffix from -15 to -20.MEDIUM SERIES,STUD SELECTION TABLE187
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESPRESS-IN STUD ASSEMBLYPART NUMBER29-90-214-10TOOLHEADRECESSKNURLED HEADBAIL STYLE RBBAIL STYLE RAQUICK ACCESS, 1/4 TURN FASTENERSFLARE-IN STUD ASSEMBLY188PANEL PREPARATION - FLUSH HEAD STYLE - When outer panel is 1.3 mm (.050") or greaterwww.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESCLIP-ON STYLELARGE SERIES, RECEPTACLESSNAP-IN STYLEPART NUMBERSteel85-47-101-15Stainless Steel85-47-101-20STUD SELECTION18.3(.72)PART NUMBER Calculate as follows. Use column III in studselection table.85-35-309-56Material: See medium size.19.1(.75)17.9(.71)STUD SELECTION Calculate outer panel thickness 8.4 mm (.330"). Use column III in stud selectiontable.Figure IP F 0.94 (.037) (constant)when G is 1.32 (.052).PANEL PREPARATIONPANEL PREPARATIONFigure IIP F G - 0.38 (.015) (constant)when G is 1.33 (.053) or greater.PART NUMBERINSTALLATION TOOL29-8125-309PART NUMBER29-85-101-10SHIELDED PRESS-IN FOR SHEET METALPART NUMBER ProvIdes RFI-EMI shielding85-35-311-55PRESS-IN FOR BLIND APPLICATIONS ANDSOLID MATERIALSPART NUMBERwith 9085-35-308-55locking stopswithout 9085-35-313-55locking stopsSTUD SELECTIONSpring: Stainless steel.STUD SELECTION Calculate outer panel thickness. Use column I in stud selection table.Material:Shell: SteelSpring: Stainless steelINSTALLATION TOOLMaterial: Shell: SteelPANEL PREPARATIONPART NUMBER90-2825-11www.clancey.com 1-800-747-7405QUICK ACCESS, 1/4 TURN FASTENERS Calculate total material thickness. Use column II in stud selection table. Substitute 1.4 mm (.055") if frame thickness isless than 1.4 mm (.055").189
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESLARGE SERIES,LEAF SPRING RECEPTACLESPANEL PREPARATIONFOR RIVETINGPART NUMBERSteelStainless Steel85-35-295-1585-35-295-20STUD SELECTION Calculate total material thickness. Use column III in stud selectiontable.FOR WELDINGPART NUMBER85-35-296-15Material:Spring: 1064 SteelBase: 1010 steelRivet: Steel, copper plateSTUD SELECTION Calculate total material thickness. Use column III in stud selectiontable.CLAMPING TOOLPART NUMBERQUICK ACCESS, 1/4 TURN FASTENERS85-90-3278-11190SIDE MOUNTPART NUMBER85-45-101-15Material:Spring: 1064 steelBracket: 1010 steelSTUD SELECTION Calculate D 1.6 mm (.062"). Use column III in stud selectiontable.www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESLARGE SERIES,STUD SELECTION TABLEPART NUMBER29-90-215-10OVAL SLOTTEDWING HEADHEX SOCKETPHILLIPS RECESSTOOLHEAD RECESSLow profile headstyles are available instainless steel:change suffix from-15 to -20.www.clancey.comwww.clancey.com 1-800-747-7405QUICK ACCESS, 1/4 TURN FASTENERSPANEL PREPARATION - ALL STUD STYLES191
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESLARGE SERIES, RETAINERSKNURLED HEADBAIL STYLE RB Interactive configurator at www.clancey.com.BAIL STYLE RAStainlessNylonNeopremePART NUMBERPART NUMBERPART NUMBER85-34-201-2085-34-301-1285-33-101-27Use installation toolInstall by handPART NUMBER85-0-22543-11LARGE SERIES, ACCESSORIESNYLON WEAR WASHERS SEALING WASHERPART NUMBERFlat Natural85-46-103-39Cupped Natural85-46-101-39Cupped Black85-46-101-41QUICK ACCESS, 1/4 TURN FASTENERSFLAT192PART NUMBER85-43-201-38CUPPEDAdjustmentEJECTOR SPRINGPART NUMBER14-18-150-24 When using a wear washer or sealing washer add.51 mm (.020") to your outer panel thickness ortotal material thickness.Adjustment When using an ejector spring and wear washer add 1.5 mm(.060") to your outer panel thickness or total material thickness.www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIES Lightweight, high strength plastic system. Economical cost and installation. High cycle life.DART 1/4 FASTENERSHow to order DART fasteners:Select receptacle on following page.Determine if you will use the retainer (recommended) or spring ejectaccessories (optional).Choose your stud head style.➃ Determine “-LLL.” Using formulas next to receptacles on following page.Account for retainer, spring and cup when calculating total materialthickness (TMT) – see figure 1 below.Input “LLL” into your stud part number for ordering.Retainer and accessories.PART NUMBERSplit RetainerD1-004-000-010TMT calculationAccessory PART NUMBERSSelf Ejecting SpringsD1-X1135-2SD1-X1137-2SSelf Ejecting CupD1-X1129Use TMT to determine “LLL”for receptacle chosenADJUSTMENT .045" (1.1)WHEN “LLL” .045-.070WHEN “LLL” .075-.100ADJUSTMENT .090" (2.3)Select head style.Stud Head Style PART NUMBERSStraight SlotD1-004-LLL-030Slotted 030 .060".080".060".130".330"Use TMT to determine “LLL”on following page.Note: Retainer falls in gap.www.clancey.com 1-800-747-7405QUICK ACCESS, 1/4 TURN FASTENERSTMT EXAMPLEP Outer panelG GapQ Support (frame)using cup spring193
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESRIVET-ONRECEPTACLERivet-InPART NUMBERStud Length SelectionStud Length Selection TableTMTStud Dim. “LLL”2.54 - 3.80 (.100 - .149")-0453.81 - 5.07 (.150 - .199")-0505.08 - 6.34 (.200 - .249")-0556.35 - 7.61 (.250 - .299")-0607.62 - 8.88 (.300 - .349")-0658.89 - 10.15 (.350 - .399")-07010.16 - 11.14 (.400 - .449")-07511.43 - 12.69 (.450 - .499")-08012.70 - 13.96 (.500 - .549")-08513.97 - 15.23 (.550 - .599")-09015.24 - 16.50 (.600 - .649")-09516.51 - 17.77 (.650 - .699")-100SNAP-INFRONT LOADD1-004-001-0101. Gap thickness (G) is the studretainer thickness.This part may be nested intorecessed holes.2. Add 1.1 (0.45) for a Split Retainerto your TMT calibration.3. For use with Self-Ejecting Studs add2.3 (.090) to your TMT calculation.Mini Snap-InFront LoadPART 1-004-914-010D1-004-915-010Clip-On RecepticalPART tud Length SelectionNOTES:SupportThicknessDim. Q0.9-1.25 (.035-.049)1.3-1.75 (.051-.069)1.8-2.25 (.035-.049)2.3-2.75 (.091-.109)2.8-3.25 (.111-.129)SupportThicknessDim Q0.7 - 2.3 (.027 - .090)2.3 - 3.9 (.090 - .153)3.9 - 5.5 (1.53 - 2.16)CLIP-ONRECEPTACLEX Dim.1.7 (0.67)2.2 (0.87)2.7 (1.06)3.2 (1.26)3.7 (1.45)Stud Length Selection TableTMTStud Dim. “LLL”4.32 - 5.58 (.170 - .219")-0455.59 - 6.85 (.220 - .269")-0506.86 - 8.12 (.270 - .319")-0558.13 - 9.39 (.320 - .369")-0609.40 - 10.66 (.370 - .419")-06510.67 - 11.93 (.420 - .469")-07011.94 - 13.20 (.470 - .519")-07513.21 - 14.47 (.520 - .569")-08014.48 - 15.74 (.570 - .619")-08515.75 - 17.01 (.620 - .669")-09017.02 - 18.28 (.670 - .719")-09518.29 - 19.55 (.720 - .769")-100SNAP-INBACK LOADNOTES:1. Gap thickness (G) is the thicknessof receptacle top flange 2 (.079).This part may be nested intorecessed holes.2. For use with Self-Ejecting Studs add2.3 (.090) to your TMT calculation.SupportThicknessRanges Q0.81-1.27 (.032-.050)1.29-2.54 (.051-.100)Mini Snap-InBack LoadPART NUMBERSD1-004-012-010D1-004-013-010X Dim.3 (.118)4.3 (1.69)QUICK ACCESS, 1/4 TURN FASTENERSReceptacle Selection Table194Determine the thickness of the support material (Q). Find theSupport Thickness Range in the table above to determineyour Receptacle Part Number.Stud Length SelectionStud Length Selection TableTMTStud Dim. “LLL”4.13 - 5.39 (.169 - .220")-0455.40 - 6.66 (.220 - .272")-0506.67 - 7.93 (.272 - .324")-0557.94 - 9.20 (.324 - .376")-0609.21 - 10.47 (.376 - .427")-06510.48 - 11.47 (.427 - .468")-07011.48 - 13.01 (.468 - .531")-07513.02 - 14.28 (.531 - .583")-08014.39 - 15.55 (.583 - .635")-08515.56 - 16.82 (.635 - .687")-09016.83 - 18.09 (.687 - .738")-09518.10 - 19.36 (.738 - .790")-100Stud Length SelectionNOTES:1. Gap thickness (G) is the combinedthickness of receptacle top flange1.1 (0.45) and stud retainer thickness.These parts may be nested intorecessed holes.2. Add 1.15 (0.45) for Split Retainerto your TMT calibration.Stud Length Selection TableTMTStud Dim. “LLL”4.15 - 5.41 (.169 - .221")-0455.42 - 6.68 (.221 - .273")-0506.69 - 7.95 (.273 - .324")-0557.96 - 9.22 (.324 - .376")-0609.23 - 10.49 (.376 - .428")-06510.50 - 11.76 (.428 - .480")-07011.77 - 13.03 (.480 - .532")-07513.04 - 14.30 (.532 - .587")-08014.31 - 15.57 (.587 - .636")-08515.58 - 16.84 (.636 - .761")-09016.85 - 18.11 (.761 - .739")-09518.12 - 19.38 (.739 - .791")-100NOTES:1. Gap thickness (G) is the combinedthickness of receptacle top flange1.15 (.045) and stud retainerthickness. These parts may be nestedinto recessed holes.2. Add 1.15 (0.45) for Split Retainerto your TMT calibration.3. For use with Self-Ejecting Studs add2.3 (.09) to your TMT calculation.3. For use with Self-Ejecting Studs add2.3 (.09) to your TMT calculation.www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIES Economical 1/4 turn fastener with highly desired“Push-to-Close” action. Available in black or bright. Neoprene washer absorbs vibration. Lateral tolerance receptacle helps with paneldeflection and tolerance stack-up. Can be customized for volume applications. No tools required for assembly.PILOT 1/4 TURN FASTENERHOW TO ORDER:Step 1 –Select ReceptacleBoth receptacles provide the samestrength values. Use the StandardReceptacle in normal cases. TheLateral Tolerance Receptacle easesstud alignment. choose either tofit support panel thickness.ReceptaclesStep 2 –Select StudA choice of two stud styles isoffered: standard studs and selfejecting. To complete the studassembly a separate retainerand washer must be specifiedat time of order.StandardHOW IT WORKSLateral TolerancePilot AssemblyTypical AssemblyStudsStandardSelf-EjectingFigure 1:P Panel ThicknessQ Support ThicknessReceptacle InstallationWe are happy to provide samples of this,or any part in our offering to assist inyour application development. You mayrequest online 24/7 at www.clancey.com,or call our customer service team at800-747-7405. We are ready to help.www.clancey.com 1-800-747-7405Pilot studs and receptaclerequire no tooling forinstallation. After panelpreparation all componentsinstall by hand.Panel PreparationStandardLateral ToleranceQUICK ACCESS, 1/4 TURN FASTENERSSAMPLES195
QUICK ACCESS FASTENERS1/4-TURN ASSEMBLIESStepStepReceptacle selectionSTANDARDRECEPTACLEStandardPilot Stud selectionNOTE: Order both stud & washer(2) part numbers.STANDARDSTUD & WASHERStandard StudsWasherStandardD7-285-101-161.050 to .069 D7-285-102-161.070 to .089 D7-285-103-161LATERAL TOLERANCERECEPTACLE Provides .200" oflateral tolerance.P Panel thicknessQ Support thicknessQUICK ACCESS, 1/4 TURN FASTENERSLateral Tolerance196PPanelThickness.050 to .069 .070 to .089 .090 to .109 .110 to .129 .130 to .149 .150 to .169 .170 to .189 TWasher Thickness.025 to .049 StandardStud Selection1. Select stud and washerpart numbers from thetables at right based onMaterial: Case hardened steelyour panel thickness (P).Finish:Zinc plate with black2. Typical washeror bright chromatecompression.040" to .080"Stud & Washer SelectionStud Dim. LPart NumberStud Dim. BSupport Thickness(Q).63 .63 .70 .70 .70 .70 .79 .28 .28 .35 .35 .35 .35 .43 .16 .14 .20 .18 .16 .14 .20 SELF-EJECTSTUDLateral TolerancePart NumberSupport Thickness(Q)Lateral Tolerance.025 to .049 D7-285-201-161.050 to .069 D7-285-202-161.070 to .089 D7-285-203-161.090 to .109 D7-285-204-161.110 to .129 D7-285-205-161Material & FinishMaterial:Spring steelFinish:Zinc phosphateSelf-Ejecting StudsNeoprene rubberBlackPart 18-190D7-265-718-190D7-265-720-190WasherForStd. -400For Lat. -150-400NOTE: Order both stud & retainer(2) part numbers.Retainer (Required)StudThe ejecting assembly locks into the receptacle with a push on the stud. The eject springprovides locking tension that allows greatermaterial thickness tolerance. A quarter turnMaterial:releases the assembly. The ejecting studassembly has a reduced gap between panelFinish:and support and can be used with either thesquare hole or lateral tolerance receptacles.Material & FinishMaterial:Case hardened steel with zincplate with black or bright chromeCup:Black thermoplasticSpring:Stainless steelRetainer: Acetal copolymerMaterial:Finish:Case hardened steelZinc plate with blackor clear chromatePART NUMBERD7-275-203-040PART NUMBERSPanelThicknessBlackBright.020" - .120" D7-290-718-191 D7-290-718-190.100" - .200" D7-290-720-191 D7-290-720-190www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERS1/4-TURN FASTENERSNYLATCH 1/4 TURN FASTENER Economical choice - low installed cost. Slotted or wing head option. Non-corrosive, non-conductive.ARROW 1/4 TURN FASTENER 3 head styles. Prongs expand 4 directions. Non-corrosive, non-conductive.Fastener Length Selection1. Calculate the Grip of your application.Grip is comprised of the removable panelthickness (P), support panel thickness (F)and any gap (G) caused panel lip, washeror gasket used between panels;see Figure 1.Material & ColorMaterial & ColorPolycarbonate or Polysulfane:Black, White or NaturalUL94-V2 ratedMaterial: Acetal copolymer resinColor: BlackGrip P G FFastener SelectionLatched PositionUnlatched Position1. Choose the receptacle that fits your panel thickness “P”.2. Verify that the combined thickness of your panel and support “T” is within listedlimits.3. Choose a stud head style. Then select the part number, tabulated at bottom right,which corresponds to either the 200 or 201 series receptacle selected.StudsHex RecessGripP Max.LengthL Max.059 to .148 .042 -1.50 .076 to .165 .057 -2.51 .118 to .207 .098 -3.55 .182 to .271 .162 -4.62 KnobFor Use WithReceptacle SeriesHead StyleL DimensionStudPart NumberHex.50 D7-200-701-010200Slotted.50 D7-200-711-010Knob.50 D7-200-721-010D7-201-701-010201Nylatch Quarter-Turn Part Numbers:Hex.55 Slotted.55 D7-201-711-010Knob.55 D7-201-721-010NY-N6-XX-YYMaterial & Color-20 Black Polycarbonate-10 White Polycarbonate-30 Black Polysulfone-31 Natural PolysulfoneLength (See chart above)Basic Part NumberOptional Wing Handle for N6 Fasteners:NY-H6-YYColor - Use selection codes listed for NY-N6, above.Basic Part NumberPanel PreparationFor the Nylatch Quarter-Turn Panel Fastener,panel prep involves the stamping of a squarehole in both the removable and supportpanels. The hole in the removable panel (øR)is slightly smaller than the one in the supportpanel (øF) to allow for fastener captivation.www.clancey.com 1-800-747-7405ReceptaclesPanelThicknessPPanelPlus SupportTReceptacleUndercutBLengthUnder HeadHReceptaclePart Number.020 to .070 .080 to .200 .070 .48 D7-200-802-010.071 to .125 .135 to .250 .125 .54 D7-201-802-010Panel PreparationInstallation ProcedureTop Panel: .360 SQ. .005 .Arrow studs and receptacles are packed separately.Bottom Panel: .375 SQ. .005 . The receptacle is easily snapped into a square hole fromthe front panel and becomes self-retained. The stud is thenpushed into the receptacle until it snaps in place.QUICK ACCESS FASTENERS, 1/4 TURN FASTENERSLength SelectionSlotted197
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWS Product configurator at www.clancey.comHOW TO SELECT FAST-LEAD CAPTIVE SCREWS – ALL SIZES1. Choose a size: Small (09), Medium (12), or Large (17).2. Determine panel configuration with dimensions.DOOR THICKNESSTOTAL MATERIAL THICKNESS3. Choose a receptacle. Note: availability of styles differs with size (See pages 200, 202, 204)SADDLE TYPEQUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSFLAT TYPE198 Small envelope Available eitherrivet type orweld type Anywhere in frame Permits multiplescrew assemblies onthe same door whileallowing one screwCLIP-ON TYPEto fully retract from Simple installationreceptacle Ideal for near edge Rivet or weld typemounting4. Choose a retainer. (See pages 200, 202, 204)SIDE-MOUNT TYPE Permits mountingto plane surfaceperpendicular todoor surfacePRESS-IN TYPE Simpleinstallation Small envelope For metal panelsonly5. Determine constant.6. Add constant to total material thickness from above. ENTER IN COLUMN I7. Check your outer panel door thickness. (Must not exceed amount in column II)8. Choose your head style and finish.9. Order 3 parts: screw, retainer and receptacle.10. Order installation tools (recommended).www.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWS Product configurator at www.clancey.com.For limited space applications.Four head styles.Four receptacle styles.Vibration resistant.FAST-LEAD CAPTIVE SCREWS,SMALL SIZE800-747-7405www.clancey.com 1-800-747-7405QUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSTry this part inyour applicationPlease call for samples.199
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWSQUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSFAST-LEAD CAPTIVE SCREWS,RECEPTACLES, SMALL SIZE200 4 styles, 5 mounting options. Stainless steel options.FLAT TYPECLIP-ONPRESS-INSADDLE TYPERETAINERS, SMALL SIZEwww.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWS Product configurator at www.clancey.com.Widest range of configurations.Five head styles.Five receptacle styles.Vibration resistant.FAST-LEAD CAPTIVE SCREWS,MEDIUM SIZE800-747-7405www.clancey.com 1-800-747-7405QUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSTry this part inyour applicationPlease call for samples.201
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWSFAST-LEAD CAPTIVE SCREWS,RECEPTACLES, MEDIUM SIZE 5 styles, 9 mounting options. Stainless steel options.SIDE MOUNTFLAT TYPEQUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSPRESS-IN202SADDLE TYPECLIP-ONCLIP-ONRETAINERS, MEDIUM SIZEwww.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWS Product configurator at www.clancey.com.Robust assembly.Four head styles.Three receptacle styles.Vibration resistant.Try this part inyour applicationPlease call for samples.For detailed materialspecifications and productstrength guidelines.800-747-7405www.clancey.comQUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSwww.clancey.com 1-800-747-7405FAST-LEAD CAPTIVE SCREWS,LARGE SIZE203
QUICK ACCESS FASTENERSFAST-LEAD CAPTIVE SCREWSFAST-LEAD CAPTIVE SCREWS,RECEPTACLES, LARGE SIZE 3 styles, 4 mounting options. Stainless steel options.SIDE MOUNTCLIP-ONQUICK ACCESS FASTENERS, FAST-LEAD CAPTIVE SCREWSFLAT TYPE204RETAINERSLARGE SIZEwww.clancey.com 1-800-747-7405
QUICK ACCESS FASTENERSSPRING LOADED PLUNGERS Traditional bright or new overmo
www.clancey.com 1-800-747-7405 177 QUICK ACCESS, 1/4 TURN FASTENERS 1/4-TURN ASSEMBLIES QUICK ACCESS FASTENERS DZUS 1/4 TURN FASTENERS STANDARD L
Clancey is your custom hinge solution provider. www.clancey.com 1-800-747-7405 159 HINGES, LIFT-OFF LIFT-OFF HINGE HINGES WELD-ON ÒBULLETÓ HINGE Ð STEEL BODY Hinge can be mounted so the door can be lifted off, or reversed for permanent installation. Sleek design. FIXED PIN CONFIGURATION
QUICK OPERATING 1/4-TURN FASTENERS 4002 SERIES The 4002 Series fasteners utilize a variety of grommets designated to reinforce the panel for added strength. Certain 4002 series 1/4-turn fasteners are qualified to MIL-F-5591* specifications for sizes 5 and 7. To Order a Co
Whether it’s fasteners for protective gear worn by the military and disaster relief professionals, or fasteners used on sporting goods and medical devices, DOT fasteners remain secure in challenging environments. Lea
nomenclature of threaded fasteners, ISO Metric screw threads, Unified Inch screw threads, heat treatments for fasteners, manufacturing operations, surface discontinuities, electroplating, hot dip galvanizing and general useful information on threaded fasteners. This information will h
Since 1895, Stanley -Bostitch has been designing and manufacturing tools and fasteners for a wide variety of applications and industries. with over 500 million fasteners made every day, Stanley -Bostitch is one of the largest manufacturers of nailing & stapling tools and fasteners in the world.
splice, spare part kits are available. Leading End Kit—No. 2WL 2 sets of tip fasteners 4 sets of chevron fasteners Trailing End Kit—No. 2WT 6 sets of tail fasteners The Wedlok splice kit and standard No. 2 Flexco fasteners have 13/ 16” (30.2 mm) long bolts for belts up to 7/8” (22.3 mm) thickness.
piece is likely to split allowing the fasteners to fly free or ricochet causing personal injury. 14. Do not drive fasteners on top of other fasteners or with the tool at an overly steep angle as this may cause deflection of fasteners which could cause injury. 15. Do not use tool without safety warning label. 16.
Artificial intelligence (AI) in healthcare and research. RECENT INTEREST IN AI AI is not new, but there have been rapid advances in the field in recent years.This has in part been enabled by developments in computing power and the huge volumes of digital data that are now generated.5 A wide range of applications of AI are now being explored with considerable public and private investment and .
