Welding & Heating Nozzles/Tips - Gas And Supply
Welding & Heating Nozzles/Tipsheating nozzles / Heating tips / welding nozzlesExclusive “OPTIMIZED” nozzleswith a large choice of typesand sizes, plus uniformity of tiporifice and size for all seriesIndividual Spiral Mixersprovide optimum flame characteristicsBrass Coupling Nutwith built-in snap ring protectscone-endAll Victor NozzleAssemblies are 100% flame testedto insure peak performanceVictor offers a complete range of nozzles,tips and elbows with a size for every applicationincluding: welding, brazing, heating, descaling, hardfacing, flame priming, etc.Nozzles designed for “optimum” performance–Each complete nozzle has its own built-in spiralmixer, individually designed for each tip size andflame characteristic. Each nozzle is individuallyswaged to insure proper alignment for uniformflame, sizing and free-flow contour.Double O-ring SealProvides gas-tight connectionwithout wrenchOrifice sizes are common for all series –Regardless of nozzle series (W, W-1, W-J), flamecharacteristic or fuel gas used. The uniformity oforifice sizes simplifies nozzle selection, eliminateschances of ordering and wrong size when changingfrom one type of nozzle to another.Flame orifice sizethe same forall nozzle seriesHeating TipFuel GasASeries WSeries TENSeries RTESize: 3Size: 3Size: 3TypeMFTA0.0600.0600.060Welding Nozzle Operational Data/AcetyleneCovers Series W (Heavy Duty), W-1 (Medium Duty) And W-J (Light Duty) SeriesOperational & Performance DataMetal InThicknessMmTip Size1/32"3/64"5/64"3/32"1/8"3/16"1/4"1/2"3/4"1 000001234567810Oxy-Acetylene & Oxy-HydrogenDrill SizeOxygen(Psig)Acetylene(Psig)Acetylene(Scfh)75 (0.022)70 (0.028)65 (0.035)60 (0.040)56 (0.046)53 (0.060)49 (0.073)43 (0.089)36 (0.106)30 (0.128)29 (0.136)27 ationTorchSeriesGeneral purposewelding & heating.Uses replaceabletip ends. Flamecharacteristic –Long cone315FCH 315FCGeneral purposewelding andpreheating.Swaged one-piececopper elbow.Flame characteristic –Long coneWARNING: At no time should the withdrawal rate of an individual acetylene cylinderexceed 1/7 of the cylinder contents per hour. If additional flow capacity is required usean acetylene manifold system of sufficient size to supply the necessary volume.Oxygen consumption (SCFH) is 1.1 times the acetylene under neutral flame Illustration65 315FCW100FCW-1J-28J-40W-JSizes: 000-6, 8(Length 4.5")Size: 10 (Length 14")000-8, 10 65 000-7000-4Sizes: 000-8(Length 4.5")Size: 10 (Length 14")International Customer Care: 1-940-381-1212 / fax 1-940-483-8178www.victorequip.comNOZZLES
Welding & Heating Nozzles/Tipsheating guide / nozzle reference guideType 55 ComponentsType 55/55-1 Multi-FlameHeating Nozzles300 SeriesType 55 Series multi-flames are available as components. Threadedelbows give you the flexibility to easily service or extend the length of thenozzles. Use the special extensions adapter to extend the tip tube to therequired length.For Use with 300, HD 310C Series Torch HandlesVictor Heavy IndustryThe Type 55 Series multi-flame heating nozzles feature a raised centerpoint on the head to prevent bumping the plate and compressing the flame.The center point and improved mixer design combine to provide greaterresistance to sustained backfire and improved flow performance. Type 55scan be ordered as a complete assembly or as individual components. High capacity heating head for heat treating, straightening, & primingNOZZLESPart 5555555-120*15*10*86628" (711.2 mm)28" (711.2 mm)28" (711.2 mm)11" (279.4 mm)11" (279.4 mm)11" (279.4 mm)HD 310CHD 310CHD 310CHD 310C / 3003001000328-0012 & 0328-0013Mixer and Nut Assembly*Size 10, 15 and 20 Type 55 heating nozzles must be used with HD 310C torch handle and3/8" (9.5 mm) hose.Warning: Type 55 for all alternative fuel gases – Not for use with acetyleneType 55 – for use with Propylene based fuel gases, Methane, Propane,Butane, pressurized Natural Gas, all fuel gases except AcetyleneTipSizeOxygenPressure(PSIG)Fuel 85150/200250/350400/500BTU gthAvailableAnglesSeries0311-023220*Multi-Flame Heads----HD 310C0311-023115*Multi-Flame Heads----HD 310C0311-023010*Multi-Flame Heads----HD 310C0311-02418Multi-Flame Heads----HD 310C / 3000311-02406Multi-Flame Heads----30065 HD 310C / 3000304-0002--Multi-Flame Elbows14"(355.6 mm)0304-0095--Multi-Flame Elbows16"(406.4 mm)180 HD 310C / 3000304-0011--Multi-Flame Elbows26"(660.4 mm)65 HD 310C / 3000328-0012Mixer and nut assembly, for use with pressuresfrom 10 PSIG and up.HD 310C / 3000328-0013Mixer and nut assembly, for use with pressuresfrom 2 - 10 PSIG.HD 310C / 3000312-0064Extension Adapter - Thread specifications:1/4"- 18 NPT(F) X 1/2"- 27 UNS(F)"HD 310C / 300Warning: Type 55 for all alternative fuel gases – Not for use with acetyleneBTU Per HourTo approximate gross BTU output,multiply flow rate by BTU value listed below:2498100033742371Warning: Use flashback arrestors Although built to Victor’s quality and safety standards, due to the cutting capacityand/or design of each torch, flashback arrestors are not manufactured into the 310CSeries Victor heavy industry torches To reduce the risk of personal injury, death and/or property damage, use sufficientcapacity flashback arrestors with all Victor heavy industry torch products Alternative fuel gas only refers to propane, natural gas, propylene gases. Acetylene,hydrogen and gasoline are NOT included as an alternative gasU.S. Customer Care: 1-800-426-1888 / fax 1-800-535-0557Canada Customer Care: 1-905-827-4515 / fax 1-800-588-1714AvailableSize*Size 10, 15 and 20 Type 55 heating nozzles must be used with HD 310C torch handle and3/8" (9.5 mm) hose.Warning: Not for use with acetylenePropaneNatural GasButanePropylenePart No.44
MFN/MFN-1Heating NozzlesMFA/MFA-1Heating NozzlesFor Use with 100, 300 & HD310C SeriesTorch HandlesVictor Heavy IndustryFor Use with J, 100, 300 & HD310C SeriesTorch HandlesVictor Heavy Industry Multi-flame heating head for preheating priming, straightening, etc Multi-flame heating head for heat treating, straightening & primingPart No.BoxedPart No.ClamshellTypeSizeTip MFA80311-0538*Size 12, 15 and 20 MFN heating nozzles must be used with HD 310C torch handle and 3/8"(9.5 mm) hose.0323-02600387-0063MFA100311-0539*Warning: MFN for all alternative fuel gases – Not for use with 50325-01060387-0077MFA-JMFA-JMFA-J246-Part No.TypeSizeTip 217.5" (444.5 mm)17.5" (444.5 mm)17.5" (444.5 mm)12.0" (304.8 mm)17.5" (444.5 mm)12.0" (304.8 mm)12.0" (304.8 mm)HD 310CHD 310CHD 310C300300100100Type MFN, MFN-1 – for use with Propane & Natural GasTip SizeOxygenPressure(PSIG)Fuel on(SCFH)BTU 0SeeChart17.5"(444.5 mm)17.5"(444.5 mm)12.0"(304.8 mm)12.0"(304.8 mm)12.0"(304.8 mm)17.5"(304.8 mm)12.0"(304.8 mm)12.0"(304.8 mm)12.0"(304.8 mm)12.0"(304.8 mm)SeriesHD 310CHD 310C300300300300100100100100JJJ*Size 12, 20 and MFA heating nozzles must be used with HD 310C torch handleand 3/8" (9.5 mm) hose.Type MFA, MFA-1 – for use with AcetyleneWarning: Not for use with acetyleneBTU Per HourTo approximate gross BTU output,multiply flow rate by BTU value listed below:PropaneNatural GasButanePropyleneLength2498100033742371Tip genConsumption(SCFH)AcetyleneConsumption(SCFH)BTU 0SeeChartBTU Per HourTo approximate gross BTU output,multiply flow rate by BTU value listed below:Warning: Use flashback arrestors Although built to Victor’s quality and safety standards, due to the cutting capacityand/or design of each torch, flashback arrestors are not manufactured into the 310CSeries Victor heavy industry torches To reduce the risk of personal injury, death and/or property damage, use sufficientcapacity flashback arrestors with all Victor heavy industry torch products Alternative fuel gas only refers to propane, natural gas, propylene gases. Acetylene,hydrogen and gasoline are NOT included as an alternative gasAcetyleneMethane14701000WARNING: At no time should the withdrawal rate of an individual acetylene cylinderexceed 1/7 of the cylinder contents per hour. If additional flow capacity is requireduse an acetylene manifold system of sufficient size to supply the necessary volume.45International Customer Care: 1-940-381-1212 / fax 1-940-483-8178www.victorequip.comNOZZLES
Welding & Heating Nozzles/Tipsheating nozzles / Heating tips / welding nozzlesSeries 1 Heating TipsW Series Welding NozzlesType MFTAAcetyleneFor use with300 Series torchhandlesW-1For preheating before welding, descaling andpaint burning etc.SizePart No.68*10*120323-05270323-05280323-05230323-0524For use with100 Series torch handlesW-J* Use 3/8" (9.5m) hose and straight torchRequired pressures:12/15 Acetylene; 70/80 PSIG OxygenSize 8 is maximum size for use with cutting attachmentsNOZZLESFor use withJ Series torch handles General purpose welding & preheating Fuel gas usage - acetylene, hydrogen 65 tip angle Long cone flame One piece copper elbow tipSeries 1 Heating TipsType MFTNLP (Propane/Natural Gas)ModelFor preheating before welding, descaling andpaint burning etc.SizePart 5"4.5"4.5"4.5"4.5"4.5"4.5"4.5"4.5"JJJJJJJJJNot for use with cutting attachmentsCHT Adaptor (0312-0089)Concentrated Heating Tip Adaptor forstraightening, bending and forming of plate For Use with Alternate Fuels Use with HPP or HPN size 5 cuttingtip, multi-flame elbow, or mixer andnut assemblyU.S. Customer Care: 1-800-426-1888 / fax 1-800-535-0557Canada Customer Care: 1-905-827-4515 / fax 1-800-588-171446Part 110323-01121234567810
UM Series UniversalMixersET Series Elbow TipsFor use with 300 Series torch handlesET-1 Oxy-Acetylene universal mixers used when exactperformance & Individual nozzles are not needed.For use with 100 Series torch handlesET-JTypePart No.Fuel GasUsageElbow TipsLengthSeries4-UM-10328-0005Oxy-Acetylene000-2 ET, 3 ET-1,4 ET-11.75"(44.5 mm)1007-UM-10328-0009Oxy-Acetylene5 ET-1, 6 ET-11.75"(44.5 mm)100RTE Series ReplaceableTip EndsFor use with J Series torch handlesFor use with 300 Series torch handles General purpose welding & preheating Uses replacement tip ends (TE Series) 65 tip angle One piece copper elbow tip Long cone flame Fuel gas usage - acetylene, hydrogenModelSizePart -01280311-0129JJJJJJJETET-1ET-JRTEN General purpose brazing & preheating Long cone flame Uses TEN tip endsModelRTERTEN47SizePart No.Fuel Gas UsageSeries000323-0307Acetylene, Hydrogen30000323-0308Acetylene, Hydrogen30010323-0309Acetylene, Hydrogen30020323-0310Acetylene, Hydrogen30030323-0311Acetylene, Hydrogen30040323-0312Acetylene, Hydrogen30050323-0313Acetylene, Hydrogen30060323-0314Acetylene, Hydrogen30080323-0316Acetylene, Hydrogen300100323-0317Acetylene, Hydrogen30060323-0284N/G, Propane300International Customer Care: 1-940-381-1212 / fax 1-940-483-8178www.victorequip.comNOZZLES
Welding & Heating Nozzles/TipsWELDING NOZZLESFE SeriesFlexible ElbowReplaceable Tip EndsTE, TEN, TEMFA, TEMFN & TEMF300, 100 & J SeriesFor All Nozzles Using Replaceable Tip Ends Flexible elbow for special welding, brazing, and heating needs Multi-fuel gas service Uses replaceable tip ends Thread: 5/16"-27TypeTypePart No.Fuel GasUsageTip End ReplacementsLengthSeriesFE0323-0191Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF11.5"(292.1 mm)300FE-10324-0066Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF11.5"(292.1 mm)100FE-J0325-0102Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF11.5"(292.1 mm)JUN SeriesUniversal NozzleNOZZLES Standard bend nozzle for welding, brazing and heating Uses replaceable tip ends 65 tip angle Thread: 5/16"-27Application,DescriptionFuel GasIllustrationTEWelding, brazingFlame – long ConeOne pieceAcetyleneTENBrazing, silver brazingFlame – long ConeOne pieceNatural Gas,PropaneTEMFABrazing, silver brazing,heatingFlame – multi-flameOne pieceAcetyleneTEMFNBrazing, silver brazing,heatingFlame – multi-flameOne pieceAll Fuel GasesExcept AcetyleneTEMFBrazing, soldering,heatingFlame – multi-flameTwo pieceAll Fuel GasesExcept AcetyleneTip Size, Length, Thread SizeTypePart No.Fuel Gas UsageTip EndReplacementsUN0323-0242Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF5"(127.0 mm)300UN-10324-0094Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF5"(127.0 mm)100UN-J0325-0101Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF5"(127.0 mm)JLengthSeriesDFE Series Dual FlexibleElbows Dual flexible elbow nozzleassembly for special welding,brazing and heating Uses replaceable tip ends Thread: 5/16"-27TypePart No.Fuel Gas UsageTip EndReplacementsDFE0323-0192Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF-300DFE-10324-0092Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF-100DFE-J0325-0108Multi-GasFuel ServiceTE, TEN,TEMFA,TEMFN, TEMF-JLengthSeriesU.S. Customer Care: 1-800-426-1888 / fax 1-800-535-0557Canada Customer Care: 1-905-827-4515 / fax readPart No.1.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 mm1.5" (38.1 mm1.5" (38.1 mm1.63" (41.4 mm)1.88" (47.8 mm)2" (50.8 mm)2.25" (57.2 mm)2.75" (69.9 mm)3" (76.2 561.5" (38.1 mm)1.5" (38.1 mm)1.63" (41.4 mm)1.88" (47.8 mm)2" (50.8 mm)2.25" (57.2 1-0585TEMFA123451.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 150311-02160311-02170311-02180311-0219TEMFN3451.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 0308TEMF6789101.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 mm)1.5" (38.1 760311-06770311-06780311-06790311-0680Adapter for tip ends to fit tip tube: 5/16"-27(F) x 1/8"-27(M) 0312-0071*Fit nozzles RTE only48
Series Victor heavy industry torches To reduce the risk of personal injury, death and/or property damage, use sufficient capacity flashback arrestors with all Victor heavy industry torch products Alternative fuel gas only refers to propane, natural gas, propylene gases. Acetylene, hyd
the welding processes most often used in today's industry including plasma arc cutting, oxyfuel gas cutting and welding, Gas Metal Arc Welding (GMAW), Flux-Cored Arc Welding (FCAW), Shielded Metal Arc Welding (SMAW), and Gas Tungsten Arc Welding (GTAW). Flat welding positions and basic joints will be practiced. Pipe and tube welding
6.3 Mechanised/automatic welding 114 6.4 TIG spot and plug welding 115 7 MIG welding 116 7.1 Introduction 116 7.2 Process principles 116 7.3 Welding consumables 130 7.4 Welding procedures and techniques 135 7.5 Mechanised and robotic welding 141 7.6 Mechanised electro-gas welding 143 7.7 MIG spot welding 144 8 Other welding processes 147 8.1 .
seam butt welding resistance butt welding flash butt welding resistance butt welding shielded unshielded other process plasma laser resistance butt welding inert gas welding submerged arc welding atomic hydrogen shielded metal arc welding (coated electrode) esepl w w w . e u r e k a e l e c t r o d e s .
FOR INDUSTRIAL HEATING OF AIR AND GAS UP TO 800 C (1470 F) Traditional heating cassettes are commonly equipped with tubular heating elements as the heating source. The design of these elements limits the maximum reachable air/gas temperature to about 600 C (1110 F). With the state of art heating element design used in our Kanthal heating .
3. Classification of Underwater Welding Underwater welding may be divided into two main types: a) Wet welding b) Dry welding Fig. 3.1 Classification of underwater welding 3.1 Wet welding 3.1.1. Wet welding with coated electrode Wet welding is performed at ambient pressure with the welder-diver in the water and no physical barrier
Mild steel (mini) - 0.6mm 8132100 Use for gas welding Mild steel (mini) - 0.8mm 8132070 Use for gas welding Stainless Steel 0.8mm (mini spool) 8132090 Welding Gas CO 2 (250g) 6000642 For welding mild steel CO 2 (600g) 6000643 For welding mild steel CO 2/Argon Mix 6000660 For welding stainless/ thin sheet mil
Precautions and safe practices outlined in this booklet cover arc welding and cutting processes such as the following: 1. Gas metal arc welding (GMAW), commonly known as “MIG” welding 2. Gas tungsten arc welding (GTAW), commonly referred to as “TIG” welding 3. Shielded metal arc welding (S
Fig. 1. Welding of ga lvanized steel. Cas Metal Arc W elding Gas metal arc (GMA) welding, also known as C02 or Metal-Inert Gas (MIG) welding, is a versatile semi automatic welding process that is con venient and easy to use. Fig. 2 shows an illustration of C02 welding. GMA welding is particularly sui
