Katalog 2005 GB - JMac

PUMProtector StrainerKlickTite port connectorsAll wash-down and water-system strainers are designed to preventdebris and other particles from damaging the pump or passingthrough the system to the final outlet. The new PUMProtector inletand universal strainers from Johnson Pump are also designed tomake your life simpler.Both of these new strainers feature transparent covers for simpleinspection, a wide variety of KlickTite port connectors for simple installation and removal, and high quality materials for simplemaintenance. The new design and connectors make it possibleto remove the entire unit for thorough cleaning wherever it’s mostconvenient. We recommend 40 mesh for water pressure and washdown pumps and 20 mesh for general purpose pumpsKlickTite port connectors are available for virtually any hose diameter and make it possible to remove the entire unit for thoroughcleaning wherever it’s most convenient. They also make it possibleto drain the system quickly for effortless winterizing without the useof any tools.Inlet and Universal StrainersMaterialsStrainer Polyamide 66, blackCoverAcrylic, clearScreen Stainless steel, 20 and 40 meshO-rings Silicone and EPDMMax. liquidtemperature 50 C / 120 FMax. temperature fordrinking water 30 C / 85 FDiameter80 mm / 3.15”Height60 mm / 2.35”Port optionsSee illustrationWeight0.15 kg / 0.33 lbsMesh size20 or 40 meshUniversal StrainerOrder NoMesh KlickTite Connector09-24652-01 402x ½” hose / 3/8” BSP2x ¾” hose / ½” BSP09-24652-03 202x ½” hose / 3/8” BSP2x ¾” hose / ½” BSPBuilt-in KlickTiteTMBulk pack w/o connectorsInline strainerTotal lenght: 230 mmDiameter:32 mmOrder No.48-8003548-8003648-800378DescriptionInline strainer, 1/2" hoseInline strainer, 3/4" hoseInline strainer, 3/4" BSP2 pcs/package2 x ½” hose and 3/8” BSP2 x ¾” hose and ½” BSP2 x 90 , ¾” hose2 x 90 , ½” BSP2 x 90 , ½” hose2 x 90 , 3/8” BSP2 x Garden hose adapter2 x 3/8” BSP2 x ½” BSPOrder No.09-470921 piece/package1 x T-connection, ¾” barb!SWNE!SWNEInlet StrainerPart. NoMesh KlickTite Connector09-24653-01 40Built-in KlickTiteTM1x ½” hose / 3/8” BSP1x ¾” hose / ½” BSP09-24653-03 40Order 609-4702609-4709609-47098Accumulator tankThe use of an accumulator tank is recommended toensure effective and reliable system function. Withan accumulator tank incorporated in the system,the intervals between cut-in and cut-out will belonger when only small amounts of water aredrawn off. Less wear and tear on the pump withfever starts and stops. Pre-pressured at 0.8 bar.VolumePort connections:Height:Diameter:Weight:Order No.09-46839-0109-46839-022l1/2" or 3/4" hose315 mm160 mm1,2 kgDescription1/2" hose connection3/4" hose connection

HEAVY DUTYSUBMERSIBLE BILGE PUMPSCE marked according tofollowing standards:EN55014: 1993/Radio disturbanceISO8846: Small Craft – Electrical devices– Protection against ignition of surroundingflammable gasesISO8849: Small craft – Electrically operated bilge pumpsISO10133: Small Craft – Electrical systems– Extra-low voltage DC installationsChoose the Johnson Pump range of submersible bilge pumps andyou will not be disappointed. With a variety of mounting options,capacities of 30 to 252 L/min and clip on optional automatic switch.Johnson Pump submersible pumps can handle most of the bilgepump applications. Heavy duty motors with stainless steal (SS2343)shaft and tough thermoplastic bodies provide for a long pump life.With the Johnson Pump automatic switch installed, the pump automatically comes on when there is water in the bilge and shuts offwhen it is dry. Submersible bilge pumps are not self-priming andmust be installed in the deepest part of the bilge.Submersible Bilge PumpsThe most economic bilge pump offering low cost and easy installation. Should be mounted inthe lowest point in the bilge. The Cartridge pumps, L450-L750 as well as L1600 -L4000,can be combined with Johnson Pump new Ultima switch for fully automatic bilgepuming operation. The series of L450 Duo-L750 Duo is equipped with an electronic switch. By using Johnson Pump bilge pump control panel, the pumpcan also be run manually. The Johnson Pump series of submersible bilgepumps offer a wide range with various flows.L4000 – 12/24 V DCThe new L4000 high capacity, heavy duty bilge pump has been developed by JohnsonPump as the premier pump in our submersible bilge pump range. Featuring a robustmotor design, mechanical shaft seal, high impact ABS plastic and unique threaded portdesign, the new L4000 will out perform all other comparable pumps on the market.Universal base plate and a choice of 1.½” or 2” ports makes for a simple installation. AllL4000 pumps will be delivered with an optional check valve.Shaft:Wire size:Max dia:Max height:Weight:SS23431.5 mm2121 mm216 mm2.45 kgOrder No.Pump model32-4000-0132-4000-02L4000 12 VL4000 24 V!SWNECapacity1.0 m head (13.6 V/27 V)164 L/min - 2600 GPH164 L/min - 2600 GPHCapacitystraight (13.6 V/27 V)252 L/min - 4000 GPH252 L/min - 4000 GPHAmperage:Fuse size:Hose size:15 A10 A20 A15 A1.½" and 2"1.½" and 2"9

Cartridge L450, L550, L650, L750for 12 V DC incorporate some of the most advanced features in the industry, features developedfrom service in a wide variety of uses including racing, cruising, sport fishing, and demandingcommercial duties. For L450, L550, and L650, we have improved the design with easy-to-installDura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps.The pumps will be delivered including both a straight and a 90 smooth elbow Dura-Port.Max dia:Max height:Weight:L450, L550, L650L750!SWNE70 mm112 mm0.27 kg0.32 kgOrder No.Pump model32-1450-0132-1550-0132-1650-0132-1750-01*L450 - 700 GPHL550 - 750 GPHL650 - 850 GPHL750 - 1050 GPHCapacity1.0 m head (13.6 V)38 L/min - 601 GPH45 L/min - 713 GPH53 L/min - 844 GPH60 L/min - 952 GPHCapacitystraight (13.6 V)49 L/min - 778 GPH56 L/min - 884 GPH61 L/min - 972 GPH73 L/min - 1150 GPHAmperage:Fuse size: Hose size:2.5 A3A3.2 A3A3A5A5A5A/4"/4"3/4"1.1/8"33*) Do not include Dura-Port connectionL450 Duo, L550 Duo, L650 Duo, L750 DuoThe Cartridge Duo combines the line of Cartridge Bilge Pumps with automatic operation. The Duois equipped with a non-clogging, electronic float switch. Voltage12 V DC. For L450 Duo - L650 Duo,we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stresscracking caused by over-tightened hose clamps. The pumps will be delivered including both astraight and a 90 smooth elbow Dura-Port.!SWNEMax dia:75x100 mmMax height:112 mmWeight:L450 Duo, L550 Duo,L650 Duo0.40 kgL750 Duo0.45 kgOrder No.Pump L450 Duo - 700 GPHL550 Duo - 750 GPHL650 Duo - 850 GPHL750 Duo - 1050 GPHCapacity1.0 m head (13.6 V)38 L/min - 601 GPH45 L/min - 713 GPH53 L/min - 844 GPH60 L/min - 952 GPHCapacitystraight (13.6 V)49 L/min - 778 GPH56 L/min - 884 GPH61 L/min - 972 GPH73 L/min - 1150 GPHAmperage:Fuse size: Hose size:2.5 A3A3.2 A3A3A5A5A5A/4"/4"3/4"1.1/8"33*) Do not include Dura-Port connectionL1600 & L2200 – 12/24 V DCThe best choice when you are looking for a high performance, heavy duty bilge pump that isdesigned to meet and exceed the tough demands of commercial and recreational duty. Thispump has a liquid cooled, 12-pole motor with double ball bearings for extended service life.The L2200 motor is sealed off by a mechanical seal design that eliminates shaft wear and allows for service and replacement, while the L1600 model has lipseal.The impeller is carefullydesigned and tested to maximize head and flow.Shaft:Wire size:Max dia:Max height:Weight:L2200SS23431.5 mm2108 mm177 mm2.7 kgL1600SS23431.5 mm2108 mm149 mm1.3 kgOrder No.Pump model32-1600-0132-1600-0232-2200-0132-2200-02L1600 12 VL1600 24 VL2200 12 VL2200 24 VCapacity1.0 m head (13.6 V/27 V)98L/min - 1550 GPH98L/min - 1550 GPH120L/min - 1900GPH120L/min - 1900GPH10Capacitystraight (13.6 V/27 V)100L/min - 1600 GPH100L/min - 1600 GPH130L/min - 2060 GPH130L/min - 2060 GPHAmperage:Fuse size:7A3.5 A7.5 A4.5 A10 A6A12 A6AHose size:1.1/8"1.1/8"1.1/8" or 1.½"1.1/8" or 1.½"

Multiple Port Shower SumpCapacity, straight (13.6 V):Capacity 1.0 m head (13.6 V):Voltage:Amperage:Fuse size:Intake hose:This compact shower sump system is designed to meet thehigher demands from todays boating industry where moreand more equipment is used. This also includes the freshwater system onboard and involves showers, dishwashing machines, galleys sink etc. The showersump turns on/off automatically and has multipleinlet ports for handling waste water from morethan one tapping point. Equipped with a checkvalve on the outlet avoids water coming back intothe tank. The tank has a tight-fitting lid to minimizesplashing and odors. To further aid in cleaning, thesystem includes a filter mesh that removes with ease.Discharge hose:Max dia:Max height:Weight:72 L/min51 L/min12 V DC3.4 A5A1x3/4", 1x3/4" or 1x1",1x1.1/8" or 1x1.1/2"3/4"290x210 mm145 mm0.95 kgOrder No.32-7650-01Electronic Float SwitchAutomatic Switch AS888The Electronic Float Switch is built on the same concept as theswitch on Cartridge Duo. As a separate accessory it is possible toattach the switch to all pumps in Johnson Pump L-series.For full automatic bilge pumping operation, connect the automaticswitch to your bilge pump. The AS888 automatic switch has a timeproven micro switch without mercury. When water exceeds theacceptable level, the pump is turned on by a rolling steel ball, whichchanges the pressure on the micro switch.The AS888 attaches toany Johnson Pump bilge pump through the clip on ”T-slot” and canbe used with 6, 12, 24 or 32 V systems. Use AS888 for a better andsafer life afloat!Order No.34-1900B 12 V34-1900B 24 VMax Amp15A10AOrder No.34-888Ultima Switch!SWNENew digital technology uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptionscaused by water and fluids. Detector cells are totally sealed arenever in contact with the water, will not corrode and are not affected by oil or foreign debris. No moving parts, totally sealed solidstate electronics and field detectors, nomercury and no exposed sensors eliminate corrosion possibilities and makesthe ULTIMA switch environmentally sensitive. ULTIMA activates at a 50 mm (2”)fluid level and deactivates at a 20 mm(¾”) fluid level. An eight second delayprevents false starts . ULTIMA switch israted to handle pumps up to 20amps at12 or 24 volts.Model No.34-36303DescriptionULTIMA Switch 20 Amp Max 12/24 VMax Amp.15AA cartridge with an automatic switch AS888Bilge AlertHigh water alarm featuring new digital technology using the patented Mirus field effect cell. Totally sealed fluid detector are never incontact with water, will not corrode and are not affected by oil ordebris. Bilge Alert detects water and sends a signal to the alarm(90db) and switch conveniently mounted on a panel. Three wayrocker switch allows alarm to be tested, turned off and armed.!SWNEModel No.34-72303DescriptionBilge Alert, High Water Alarm 12 V11

Johnson Pump Bilge MateSpare motor for cartridgeA low budget alternative designed for long life and high performance capacity. The low cost choice for boat owners who still lookfor quality.Upgrade the output of your bilge pump ina matter of a few minutes by replacing thecartridge. Cleaning debris from the impellerhas never been simpler or easier.Capacity, straight:Voltage:Amperage:Fuse size:Hose size:Max dia:Max height:Weight:Order No.32-1450C32-1550C32-1650C32-1750C30 L/min12 V DC2A3A3/4"115 mm100 mm0.35 kgMotor for L450, L450 DuoMotor for L550, L550 DuoMotor for L650, L650 DuoMotor for L750, L750 DuoLift a tab at the top, givethe cartridge a twist, andpull the all-in-one motor/impeller unit out of theCartridge.Order No.32-1015-01Bilge Pump Control – 12 or 24 VSide Mount BracketJohnson Pump switch panel gives full control of your equipment.Just push the button for manual or automatic bilge pumping. Theautomatic feature operates in combination with the automatic bilge switches orthe electronic float switch from JohnsonPump. The three-position switch panelin matt black finish has an integratedfuse holder and operating light. Fusesincluded.Size: 76 x 55 mm, 40 mm depth.Gives opportunity to mount the pump on a wall.Suitable for Cartridge and Cartridge Duo.Order No.34-1224 12 V34-1225 24 V12Order No.34-900

LIVEWELL AERATING PUMPSCartridge Aerator PumpTwin Port PumpsModel No.32-4850332-48703!SWNENew twin outlet port pumps offer the convenienceof using only one intake for both the live well andraw water wash down pump. The ¾” tapered inletconnects directly to the sea cock and theupper outlet port provides a continuous flowof water through the ¾”. discharge to the livewell while the lower outlet port connects to the washdown pump through either a ½” or ¾” ports. New highpressure inlet seal easily handles the higher pressurescreated by high speed pickups commonly used.Livewell pumps in 500 GPH and 750 GPHcapacities with two different intake configurations of straight and 90 . Smaller profilesto fit in more confined spaces. Easy tochange motor cartridge. Johnson Pumpcartridge aerator pumps offer theease of convenience and years ofrealiable service.Model No.DescriptionDescription550 GPH Twin Port LiveWell/Aerator Pump750 GPH Twin Port LiveWell/Aerator Pump32-285032-3850500 GPH Cartridge aeratorpump straight500 GPH Cartridge aeratorpump 90 32-287032-3870750 GPH Cartridge aeratorpump straight750 GPH Cartridge aeratorpump 90 Spray NozzleBulkheadfittingLivewellAqua JetWD 5.0Twin Port Livewell/Aerator pumpAqua Jet Wash Down / LivewellPump Kit 5.0A new wash down kit including a high capacity Aqua Jet WD 5.0, 5bar (70 psi) pump, a 550 GPH Twin Port live well pump, PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, 7.5meters (25’) of coiled wash down hose and two illuminated panelswitches all in one package. Aqua Jets wash down/live well pumpkit makes it easy to add a wash down and live well pump to anyboat.Ice Chest Aerator kitIce Chest Aerator converts any good sizedice chest (Esky) into your own portable livebait tank. The Ice Chest Aerator will keep yourlive bait alive, or catch fresh, even during theheat of the day. Includes a sturdy Bilge Matepump, hose, spray bar, press on clamp, battery clamps and clear-cut instructions.Since there are no holes to drill the chest canalways be returned to its original purpose.Model No.32-24014DescriptionIce Chest Aerator kitIn-well Aerator kitOrder No32-64634DescriptionAqua Jet 5.0 WD/ 550 Live Well Pump KitIn-well Aerator Kit is about the easiest wayto add oxygen to your live bait well. Use it asyour primary aerator, or to recirculate whileyou’re making a long run across the bay, or ifyou are trailing the boat, you can stop for fueland be aerating your catch while the boat ison the trailer.A dependable 500 GPH forces water throughthe aerating head to provide vital oxygen forrespiration ensuring your bait stays fresh longer. To empty the wellat the end of the day, merely open the valve, activate the pump andwater passes through a discharge fitting.Model No.32-24052DescriptionIn-well Aerator kit13

BILGE, DECKWASH AND REFUELLINGCE marked according tofollowing standards:F2P10-19, F3B-19, 1992/Generic EMS Standard1993/Radio disturbance1984/Electrostatic Discharge1984/Radiated Immunity TestSmall Craft – Electrical devices – Protection againstignition of surrounding flammable gasesISO8849: Small Craft – Electrically operated bilge pumpsISO10133: Small Craft – Electrical systems – Extra-low voltage d.c.installationsF5B-1912/24 VEN55014: 1993/Radio disturbanceWith their high level of flexibility, these pumps are ideally suited foruse in boats as bilge and deckwash pumps, fresh water pumps,refuelling pumps for oil and diesel. These pumps may be combinedwith a vacuum switch for automatic operation.Capacities vary from max 14 L/min to 55 L/min, allowing the propermatching of the pump to the application. All motors are heavy dutyto provide long service life even under heavy use. Available in 12 or24 volts.Deckwash PumpingDC driven flexible impeller pumps for deckwash. Heavy duty electrical self-priming deckwash pumps with long life motor which canrun continuously under certain conditions. Flexible impeller pumpsmust not be run dry.Bilge PumpingBilge pumps with excellent suction and pressure ability. Solidparticles and debris can be handle without damaging the pump.Should be installed in a dry, well ventilated position above, but asclose to the liquid as possible. As the pumps must not be run dry, itis recommended to combine it with Johnson Pump vacuum switchthat cuts off the current to the pump when the bilge is dry. Forautomatic/manual bilge pumping the pump can be combined withJohnson Pump bilge control panel and automatic switch. Must notbe run dry.14Pressure and Capacity Data(based on water at 20 C/68 F)F2P10-19BarkPa0.15150.3300.6600.75750.990Fuse .0USGPM3.73.62.82.41.9Ampere draw12V24V7.23.57.43.67.93.88.34.08.74.216.0 A8.0 AF3B-19BarkPa0.15150.3300.6600.9901.2120Fuse .7USGPM4.03.72.91.90.7Ampere draw12V24V7.13.57.43.67.93.88.54.09.54.215.0 A 8.0 212040.2Fuse requiredRecommended wire .139.90.99030.230.11.212040.219.31.515050.39.3Fuse requiredRecommended wire sizeUSGPM14.513.110.58.05.12.4Ampere draw12V24V14.27.215.07.616.58.418.39.319.69.925.0 A 15.0 A4 mm² 2.5 mm²Ampere 29

Water pressure systems & wash down pumps 4-8 Submersible bilge pumps 9-12 Livewell aerating pumps 13 Bilge, deckwash and refuelling pumps 14-16 Bilge, waste and toilette handling 17-18 Circulating pumps 19 Self priming flexible impeller pumps 20-30 FB-5000 series 21-23 FB-8 series 24-25 FB-3000 series 26-27