Basic Operating Instructions - Panasonic
HDC-SD40&TM40GA GW GN VQT3L18 mst.book1 �１０時１７分Basic Operating InstructionsHigh Definition Video CameraModel No.HDC-SD40HDC-TM40Before use, please read these instructions completely.More detailed instructions on the operation of this unit arecontained in “Operating Instructions (PDF format)” in the suppliedCD-ROM. Install it on your PC to read it.GWVQT3L18until2011/1/17
HDC-SD40&TM40GA GW GN VQT3L18 mst.book2 �１０時１７分Information for Your SafetyWARNING:TO REDUCE THE RISK OF FIRE,ELECTRIC SHOCK OR PRODUCTDAMAGE, DO NOT EXPOSE THIS APPARATUSTO RAIN, MOISTURE, DRIPPING ORSPLASHING AND THAT NOOBJECTS FILLED WITH LIQUIDS,SUCH AS VASES, SHALL BEPLACED ON THE APPARATUS. USE ONLY THE RECOMMENDEDACCESSORIES. DO NOT REMOVE THE COVER (ORBACK); THERE ARE NO USERSERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.CAUTION! DO NOT INSTALL OR PLACE THISUNIT IN A BOOKCASE, BUILT-INCABINET OR IN ANOTHERCONFINED SPACE. ENSURE THEUNIT IS WELL VENTILATED. TOPREVENT RISK OF ELECTRICSHOCK OR FIRE HAZARD DUE TOOVERHEATING, ENSURE THATCURTAINS AND ANY OTHERMATERIALS DO NOT OBSTRUCTTHE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT’SVENTILATION OPENINGS WITHNEWSPAPERS, TABLECLOTHS,CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OFNAKED FLAMES, SUCH ASLIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN ANENVIRONMENTALLY FRIENDLYMANNER.2VQT3L18The socket outlet shall be installed nearthe equipment and easily accessible.The mains plug of the power supply cordshall remain readily operable.To completely disconnect this apparatusfrom the AC Mains, disconnect the powersupply cord plug from AC receptacle. Concerning the batteryWarningRisk of fire, explosion and burns. Do notdisassemble, heat above 60 oC orincinerate.CAUTIONDanger of explosion if battery isincorrectly replaced. Replace only withthe same or equivalent typerecommended by the manufacturer.Dispose of used batteries according tothe manufacturer’s instructions.For Australia and New ZealandIF THE POWER CORD OF THISEQUIPMENT IS DAMAGED, IT MUST BEREPLACED WITH AN ELECTRICALLYAPPROVED POWER CORD.Use only the recommended accessories. Always use a genuine Panasonic HDMImini cable (RP-CDHM15, RP-CDHM30;optional). Product identification markingProductLocationHigh DefinitionVideo CameraBattery holderAC adaptorBottom
HDC-SD40&TM40GA GW GN VQT3L18 mst.book3 ページGC/GA/GW onlyHow to replace the fuseThe location of the fuse differ accordingto the type of AC mains plug (figures Aand B).Confirm the AC mains plug fitted andfollow the instructions below.Illustrations may differ from actual ACmains plug.1) Open the fuse cover with ascrewdriver.2)Replace the fuse and close or attachthe fuse cover.-If you see this symbol-Information on Disposal in otherCountries outside the EuropeanUnionThis symbol is only validin the European Union.If you wish to discardthis product, pleasecontact your localauthorities or dealer andask for the correctmethod of �１０時１７分 Cautions for useFor Australia and New ZealandIn the event of abnormal operation (e.g. ifthe unit emits smoke or an unusual smell),immediately stop operating the unit andconsult the Panasonic Customer CareCentre on 132600.Keep this unit as far away as possiblefrom electromagnetic equipment (suchas microwave ovens, TVs, video gamesetc.). If you use this unit on top of or near a TV,the pictures and/or sound on this unit maybe disrupted by electromagnetic waveradiation. Do not use this unit near cell phonesbecause doing so may result in noiseadversely affecting the pictures and/orsound. Recorded data may be damaged, orpictures may be distorted, by strongmagnetic fields created by speakers orlarge motors. Electromagnetic wave radiation generatedby microprocessors may adversely affectthis unit, disturbing the pictures and/orsound. If this unit is adversely affected byelectromagnetic equipment and stopsfunctioning properly, turn this unit off andremove the battery or disconnect ACadaptor. Then reinsert the battery orreconnect AC adaptor and turn this uniton.Do not use this unit near radiotransmitters or high-voltage lines. If you record near radio transmitters orhigh-voltage lines, the recorded picturesand/or sound may be adversely affected.About connecting to a PC Do not use any other USB cables exceptthe supplied one.3VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book4 ページ About the recording format forrecording motion picturesYou can select from either AVCHD or iFramerecording formats to record motion picturesusing this unit.AVCHD:You can record high definition quality imageswith this format. It is suitable for viewing on alarge format TV or for saving to disc.iFrame:This is a recording format suitable forplaying back or editing Mac (iMovie’11).Using iMovie’11, iFrame motion pictures canbe imported faster than AVCHD motionpictures. Also, the imported file size ofiFrame motion pictures will be smaller thanthat of AVCHD motion pictures. It is not compatible with motion picturerecorded in AVCHD format. Indemnity about recordedcontentPanasonic does not accept anyresponsibility for damages directly orindirectly due to any type of problems thatresult in loss of recording or edited content,and does not guarantee any content ifrecording or editing does not work properly.Likewise, the above also applies in a casewhere any type of repair is made to the unit.(including any other non-built-in memoryrelated ��日午前１０時１７分 Cards that you can use withthis unitSD Memory Card, SDHC Memory Cardand SDXC Memory Card 4 GB or more Memory Cards that do nothave the SDHC logo or 48 GB or moreMemory Cards that do not have the SDXClogo are not based on SD Memory CardSpecifications. Refer to page 11 for more details on SDcards. For the purposes of theseoperating instructions SD Memory Card, SDHC Memory Cardand SDXC Memory Card are referred toas the “SD card”. Functions that can be used for motionpicture recording/motion picture playbackare indicated byin theseoperating instructions. Functions that can be used for still picturerecording/still picture playback areindicated byin these operatinginstructions. Pages for reference are indicated by anarrow, for example: l 00These operating instructions are designedfor use with modelsand. Pictures may be slightlydifferent from the original. The illustrations used in these operatinginstructions show model,however, parts of the explanation refer todifferent models. Depending on the model, some functionsare not available. Features may vary, so please readcarefully. Not all models may be availabledepending on the region of purchase.
HDC-SD40&TM40GA GW GN VQT3L18 mst.book5 �１０時１７分ContentsInformation for Your Safety.2Accessories.6Optional accessories. 7PreparationPower supply. 8Inserting/removing the battery. 8Charging the battery . 9Charging and recording time. 10Recording to a card . 11Cards that you can use with thisunit . 11Inserting/removing an SD card. 12Turning the unit on/off.13Turning the unit on and off with thepower button . 13Selecting a mode .13Setting date and time. 14BasicSelecting a media to record[HDC-TM40] .15Recording motion pictures .15Recording still pictures . 16Intelligent auto mode. 16Motion picture/Still picture playback . 17Watching Video/Pictures on yourTV . 18Using the menu screen . 19Language selection . 19Zoom in/out function . 20Formatting . 20Deleting scenes/still pictures . 21OthersSpecifications.22About copyright . 26Reading the Operating Instructions(PDF format) . 275VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book6 soriesCheck the accessories before using this unit.Keep the accessories out of reach of children to prevent swallowing.Product numbers correct as of Feb. 2011. These may be subject to change.Battery packVW-VBK180AC adaptorVSK0712AC cable(GC/GA/GW)A K2CT39A00002B K2CQ29A00002(GN)C K2CJ29A00002A Hong Kong Special AdministrativeRegion of China and Saudi ArabiaB Areas Other than Hong Kong SpecialAdministrative Region of China, SaudiArabiaC Australia and New ZealandAV multi cableK1HY12YY0008USB cableK1HA05AD0007CD-ROMSoftwareCD-ROM(GC)Operating InstructionsVFF0781(GA/GW/GN)Operating �
HDC-SD40&TM40GA GW GN VQT3L18 mst.book7 �１０時１７分Optional accessoriesSome optional accessories may not be available in some countries.(GC/GA/GW)Battery charger (VW-BC10E/EB)(GN)Battery charger (VW-BC10GN)Battery pack (lithium/VW-VBK180)Battery pack (lithium/VW-VBK360)HDMI mini cable (RP-CDHM15,RP-CDHM30)Video DC light (VW-LDC103E)*Light bulb for video DC light (VZ-LL10E)Shoe adaptor (VW-SK12E)(GC/GA/GW)Accessory kit (VW-ACK180E/EB)(GN)Accessory kit (VW-ACK180GN)* (GC/GA/GW)To use the VW-LDC103E, the shoeadaptor/VW-SK12E and the batterypack/VW-VBG130, VW-VBG260 arerequired. To charge the battery pack/VW-VBG130, VW-VBG260, the ACadaptor/VW-AD21E/EB-K, VW-AD20E/EB-K is required.(GN)To use the VW-LDC103E, the shoeadaptor/VW-SK12E and the batterypack/VW-VBG130, VW-VBG260 arerequired. To charge the battery pack/VW-VBG130, VW-VBG260, the ACadaptor/VW-AD21GN-K,VW-AD20GN-K is required.7VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book8 �１０時１７分PreparationPower supply About batteries that you can use with this unitThe battery that can be used with this unit is VW-VBK180/VW-VBK360. The unit has a function for distinguishing batteries which can be used safely. Thededicated battery (VW-VBK180/VW-VBK360) supports this function. The onlybatteries suitable for use with this unit are genuine Panasonic products andbatteries manufactured by other companies and certified by Panasonic. (Batterieswhich do not support this function cannot be used). Panasonic cannot in any wayguarantee the quality, performance or safety of batteries which have beenmanufactured by other companies and are not genuine Panasonic products.It has been found that counterfeit battery packs which look very similar to thegenuine product are made available to purchase in some markets. Some of thesebattery packs are not adequately protected with internal protection to meet therequirements of appropriate safety standards. There is a possibility that thesebattery packs may lead to fire or explosion. Please be advised that we are not liablefor any accident or failure occurring as a result of use of a counterfeit battery pack.To ensure that safe products are used we would recommend that a genuinePanasonic battery pack is used.Inserting/removing the battery Press the power button to turn off the unit. (l 13)Install the battery by inserting it in the direction shown in the figure.Removing the battery Be sure to hold down the power buttonuntil the status indicator goes off. Thenremove the battery while supporting theunit to prevent it dropping.Move the battery release lever in thedirection indicated by the arrow andremove the battery when unlocked.A Battery holderB Insert the battery until it clicks andlocks.ャモヵヵ8VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book9 �１０時１７分Charging the batteryWhen this unit is purchased, the battery is not charged. Charge the battery fullybefore using this unit.The unit is in the standby condition when the AC adaptor is connected. The primary circuit isalways “live” as long as the AC adaptor is connected to an electrical outlet.Important: Use the supplied AC adaptor. Do not use the AC adaptor of another device. Do not use the AC cable with any other equipment as it is designed only for this unit.Also, do not use the AC cable from other equipment with this unit. (GC/GA/GW)The battery can also be charged using a battery charger (VW-BC10E/EB; optional). (GN)The battery can also be charged using a battery charger (VW-BC10GN; optional). The battery will not be charged if the unit is turned on. It is recommended to charge the battery in a temperature between 10 oC to 30 oC.(The battery temperature should also be the same.) A DC input terminal Insert the plugs as far as they will go.12Connect the AC adaptor to the DC input terminal.Connect the AC cable to the AC adaptor, then the AC outlet. The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.It will turn off when the charging is completed. Connecting to the AC outletIf you turn on the unit while connecting with the AC adaptor, you can use the unit with powersupplied from the outlet. Do not use any other AC adaptors except the supplied one. We recommend using Panasonic batteries (l 6, 7). If you use other batteries, we cannot guarantee the quality of this product. Do not heat or expose to flame. Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long periodof time with doors and windows closed.9VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book10 �１０時１７分Charging and recording time Charging/Recording time Temperature: 25 oC/humidity: 60%RH (When using AC adaptor)HDC-SD40Battery model dingmodeMaximumcontinuouslyrecordable timeActualrecordabletimeSupplied battery/VW-VBK180 (optional)[3.6 V/1790 mAh]2 h 25 min[HA], [HG],[HX]2 h 15 min1 h 10 min[iFrame]2 h 40 min1 h 25 minHDC-TM40Battery model dingmodeMaximumcontinuouslyrecordable timeActualrecordabletimeSupplied battery/VW-VBK180 (optional)[3.6 V/1790 mAh]2 h 25 min[HA], [HG],[HX]2 h 15 min1 h 10 min[iFrame]2 h 40 min1 h 25 min These times are approximations. The indicated charging time is for when the battery has been discharged completely.Charging time and recordable time vary depending on the usage conditions such ashigh/low temperature. The actual recordable time refers to the recordable time when repeatedly starting/stoppingrecording, turning the unit on/off, moving the zoom lever etc. The batteries heat up after use or charging. This is not a malfunction.Battery capacity indication The display changes as the battery capacity reduces.####If there is less than 3 minutes remaining, thenwill become red. If the batterydischarges, thenwill flash. The remaining battery capacity is displayed when using the Panasonic battery that youcan use for this unit. The actual time can vary depending on your actual use. When using the AC adaptor or batteries made by other companies, the remainingbattery capacity will not be shown.10VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book11 �１０時１７分PreparationRecording to a cardThe unit can record still pictures or motion pictures to an SD card or built-in memory. Torecord to an SD card, read the following.This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHCMemory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXCmemory card with other equipment, check the equipment is compatible with these memorycards.Cards that you can use with this unitUse SD cards conforming to Class 4 or higher of the SD Speed Class Rating* formotion picture recording.Card typeCapacity8 MB/16 MB/32 MBSDMemory Card64 MB/128 MB/256 MBMotion picture recordingCannot be used.Still picturerecordingCannot be guaranteed inoperation.Cannot beguaranteed inoperation.Can be used.Can be used.512 MB/1 GB/2 GBSDHCMemory Card4 GB/6 GB/8 GB/12 GB/16 GB/24 GB/32 GBSDXCMemory Card48 GB/64 GB* SD Speed Class Rating is the speedstandard regarding continuous writing.Check via the label on the card, etc.e.g.: Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC Memory Cards that can be used for motion picture recording on the l/cs/e cam(This website is in English only.) 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more MemoryCards that do not have the SDXC logo are not based on SD Memory Card Specifications. Memory cards that exceed 64 GB cannot be used. When the write-protect switch A on SD card is locked, no recording,deletion or editing will be possible on the card. Keep the Memory Card out of reach of children to prevent swallowing.3211VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book12 �１０時１７分Inserting/removing an SD cardWhen using an SD card not from Panasonic, or one previously used on other equipment,for the first time on this unit, format the SD card. (l 20) When the SD card is formatted, allof the recorded data is deleted. Once the data is deleted, it cannot be restored.Caution:Check that the access lamp has gone off.Access lamp [ACCESS] A When this unit is accessing the SDcard or built-in memory, the access lamplights up.12 Open the LCD monitor.Open the SD card cover andinsert (remove) the SD cardinto (from) the card slot B. Face the label side C in the directionshown in the illustration and press itstraight in as far as it will go. Press the centre of the SD card and thenpull it straight out.3Securely close the SD cardcover. Securely close it until it clicks. Do not touch the terminals on the back ofthe SD card. Do not apply strong shocks, bend, or dropthe SD card. Electrical noise, static electricity or thefailure of this unit or the SD card maydamage or erase the data stored on theSD card. When the card access lamp is lit, do not:j Remove the SD cardj Turn the unit offj Insert and remove the USB cablej Expose the unit to vibrations or shockPerforming the above while the lamp is onmay result in damage to data/SD card orthis unit. Do not expose the terminals of the SDcard to water, garbage or dust.12VQT3L18 Do not place SD cards in the following areas:j In direct sunlightj In very dusty or humid areasj Near a heaterj Locations susceptible to significantdifference in temperature (condensationcan occur.)j Where static electricity orelectromagnetic waves occur To protect SD cards, return them to theircases when you are not using them. About disposing of or giving away the SDcard.(Refer to the Operating Instructions (PDFformat))
HDC-SD40&TM40GA GW GN VQT3L18 mst.book13 �１０時１７分PreparationTurning the unit on/offYou can turn the unit on and off using the power button or by opening and closing the LCDmonitor.Turning the unit on and off with the power buttonPress the power button to turn on the unit. To turn off the unitHold down the power buttonuntil the status indicatorgoes off.A The status indicator lights.PreparationSelecting a modeChange the mode to recording or playback.Operate the mode switch to change the mode toor.Recording mode (l 15)Playback mode (l 17)13VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book14 �１０時１７分PreparationSetting date and timeWhen the unit is turned on for the first time, a message asking you to set the date and timewill appear.Select [YES] and perform steps 2 to 3 below to set the date and time. Change the mode to1.Select the menu. (l 19): [SETUP] # [CLOCK SET]2Select the date or time using 2/1 and set the desired value using3/4.A Displaying the World time setting:[HOME]/[DESTINATION] The year can be set between 2000 and2039. The 24-hour system is used to display thetime.3Press the ENTER button. A message prompting for World time setting may be displayed. Perform the World timesetting by pressing the ENTER button. Press the MENU button to complete the setting. The date and time function is driven by a built-in lithium battery. When this unit is purchased, the clock is set. If the time display becomes [- -], the built-inlithium battery needs to be charged. To recharge the built-in lithium battery, connect the ACadaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and thebattery will maintain the date and time for approx. 4 months. (The battery is still beingrecharged even if the unit is off.)For Australia and New ZealandWARNINGTHE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIEDPERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARECENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.14VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book15 �１０時１７分BasicSelecting a media to record [HDC-TM40]The card and built-in memory can be selected separately to record motion pictures or still pictures.12Change the mode to.Select the menu. (l 19): [MEDIA SELECT]3Select the media for recording the motion pictures and the media forrecording the still pictures using 3/4/2/1, and press the ENTERbutton. ABCD[VIDEO/SD CARD][VIDEO/Built-inMemory][PICTURE/SD CARD][PICTURE/Built-inMemory] The media is selected separately to motion pictures or still pictures is highlighted in yellow. Selectand press the ENTER button to return to the previous screen.4Press the MENU button to complete the settings.BasicRecording motion pictures Open the lens cover before turning onthe unit.1Change the mode toopen the LCD monitor.2Press the recording start/stopbutton to start recording.and A When you begin recording, ; changesto .3Press the recording start/stopbutton again to pauserecording.15VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book16 �１０時１７分BasicRecording still picturesStill picture recorded with size of 2.1 M (1920k1080) and an aspect ratio of 16:9. Open the lens cover before turning onthe unit.1Change the mode toopen the LCD monitor.2Press theandbutton.BasicIntelligent auto modeThe modes appropriate for the condition are set just by pointing the unit to what you want torecord.Intelligent auto/ManualbuttonPress this button to switchintelligent auto mode/manualmode.16VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book17 �１０時１７分BasicMotion picture/Still picture playback123Change the mode to.Select the play mode selecticon A using 3/4/2 andpress the ENTER button. Select the [VIDEO/PICTURE] you wish to play back, then press theENTER button.Select the [MEDIA] and [VIDEO/PICTURE] you wish to play back,then press the ENTER button. Press the MENU button.4Select the scene or the stillpicture to be played back using3/4/2/1, then press theENTER button. 15. 11 . 20110 00 15is displayed when [AVCHD] isselected oris displayed when[iFrame] is selected in step 3. When you select/and press the ENTER button, the next (previous) page isdisplayed.Bhms17VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book518 �１０時１７分0h00m00sSelect the operation icon using3/4/2/1.A Operation icon Press the ENTER button to display/not-displaythe operation icon.Motion picture playback1/;:6:5: : Still picture playbackPlayback/PauseRewind playbackFast forward playbackStops the playback and showsthe thumbnails.1/;:2;:;1: :Slide show (playback of the stillpictures in numerical order)start/pause.Plays back the previous picture.Plays back the next picture.Stops the playback and showsthe thumbnails.Watching Video/Pictures on your TV1Connect this unit to a TV.A AV multi cable (supplied)AV MULTI Check that the plugs are inserted as far as they go. Do not use any other AV multi cables except the supplied one. When connecting to the component terminal of the TV, the yellow plug of the AV multi cableis not required. When connecting to the AV terminal of the TV, do not connect the component terminal plugof the AV multi cable. Image may not display when the component terminal plug isconnected simultaneously.2318Select the video input on the TV.Change the mode toVQT3L18to play back.
HDC-SD40&TM40GA GW GN VQT3L18 mst.book19 �１０時１７分BasicUsing the menu screen12Press the MENU button.Select the top menu A using3/4 and press 1 or press theENTER button.To get back to the previous screenPress 2 of the cursor button.To exit the menu screenPress the MENU button. About the information displayDescriptions of the selected submenus anditems displayed in steps 3 and 4, andmessages to confirm settings are displayed. About the operation icons3Select the submenu B using3/4 and press 1 or press theENTER button.4Select the desired item using3/4/2/1, and press theENTER button to set./:Select and then press the ENTER buttonto switch the menu and thumbnaildisplay page.:Select and then press the ENTER buttonto return to the previous screen in casessuch as menu setting, etc.Language selectionYou can select the language on the screendisplay and the menu screen.:[SETUP] # [LANGUAGE]19VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book20 �１０時１７分BasicZoom in/out function Change the mode to.Zoom lever6 WTT side:Close-up recording (zoom in)W side:Wide-angle recording (zoom out) The zoom speed varies depending on therange over which the zoom lever is moved.BasicFormattingPlease be aware that if a medium is formatted, then all the data recorded on themedium will be erased and cannot be restored. Back up important data on a PC, DVDdisc etc.Select the menu. (l 19): [SETUP] # [FORMAT CARD]: [SETUP] # [FORMAT MEDIA] # [Built-inMemory] or [SD CARD]20VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book21 �１０時１７分BasicDeleting scenes/still picturesDeleted scenes/still pictures cannot be restored, so perform appropriateconfirmation of the contents before proceeding with deletion. Change the mode to.To delete by confirming imagesbeing played backPress the/LIGHT button while scenesor still pictures to be deleted are beingplayed back.21VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book22 sSpecificationsHigh Definition Video CameraInformation for your safetyPower source:Power consumption:DC 5.0 V (When using AC adaptor)DC 3.6 V (When using battery)Recording;3.5 WCharging;7.7 WSignal system:1080/50i, 540/25pRecording format:[HA]/[HG]/[HX]; AVCHD format compliant[iFrame]; MPEG-4 AVC file format compliant (.MP4)Image sensor:1/5.8 type (1/5.8z) 1MOS image sensorTotal; 1500 KEffective pixels;Motion picture/Still picture; 1190 K (16:9)Lens:Auto Iris, 16.8k Optical Zoom, F1.8 to F2.6Focal length;2.9 mm to 48.7 mmMacro (Full range AF)35 mm equivalent;Motion picture/Still picture;42.9 mm to 721 mm (16:9)Minimum focus distance;Normal;Approx. 4 cm (Wide)/Approx. 1.2 m (Tele)Tele macro;Approx. 50 cm (Tele)Zoom:16.8k optical zoom, 50k/1200k digital zoomImage stabilizer function:Optical (Active mode)Monitor:6.7 cm (2.7z) wide LCD monitor (Approx. 230 K dots)Microphone:StereoSpeaker:1 round speaker, dynamic type22VQT3L18午前１０時１７分
HDC-SD40&TM40GA GW GN VQT3L18 mst.book23 �１０時１７分White balance adjustment:Auto tracking white balance systemStandard illumination:1,400 lxMinimum required illumination:Approx. 7 lx (1/25 with low light mode in the scene mode)Approx. 1 lx with the colour night view functionAV multi connector video output level:Component video out put level;Y;1.0 Vp-p, 75 hPb;0.7 Vp-p, 75 hPr;0.7 Vp-p, 75 hAV video output level;1.0 Vp-p, 75 h, PAL systemHDMI mini connector video output level:HDMI 1080i/576pAV multi connector audio output level (Line):316 mV, 600 h, 2 chHDMI mini connector audio output level:Linear PCMUSB:Reader/writer functionSD card; Read/Write (No copyright protection support)Built-in memory; Read onlyHi-Speed USB (USB 2.0), USB terminal Type Mini BBattery charging function (Charges from USB terminal when the main unit is off)Dimensions:51.5 mm (W)k57.5 mm (H)k108.5 mm (D)(excluding projecting parts)Mass:Approx. 169 g[without battery (supplied) and an SD card (optional)]Approx. 169 g[without battery (supplied)]Mass in operation:Approx. 213 g[with battery (supplied) and an SD card (optional)]Approx. 211 g[with battery (supplied)]23VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book24 ページ２０１１年２月９日Operating temperature:0 oC to 40 oCOperating humidity:10%RH to 80%RHBattery operation time:See page 10 Motion picturesRecording media:SD Memory Card (FAT12 and FAT16 system compliant)SDHC Memory Card (FAT32 system compliant)SDXC Memory Card (exFAT system compliant)Refer to page 11 for details on SD cards usable in this unit.Built-in memory; 16 GBCompression:MPEG-4 AVC/H.264Recording mode and transfer rate:[HA]; Approx. 17 Mbps (VBR)[HG]; Approx. 13 Mbps (VBR)[HX]; Approx. 9 Mbps (VBR)[iFrame]; Approx. 28 Mbps (VBR)Refer to the operating instructions (PDF format) for the recordable time.Picture size:[HA]/[HG]/[HX]; 1920k1080/50i[iFrame]; 960k540/25pAudio compression:AVCHD; Dolby Digital (2 ch)iFrame; AAC (2 ch)24VQT3L18水曜日午前１０時１７分
HDC-SD40&TM40GA GW GN VQT3L18 mst.book25 �１０時１７分 Still picturesRecording media:SD Memory Card (FAT12 and FAT16 system compliant)SDHC Memory Card (FAT32 system compliant)SDXC Memory Card (exFAT system compliant)Refer to page 11 for details on SD cards usable in this unit.Built-in memory; 16 GBCompression:JPEG (Design rule for Camera File system, based on Exif 2.2 standard)Picture size:Picture aspect [16:9];1920k1080Refer to the operating instructions (PDF format) for the number of recordable pictures.AC adaptorInformation for your safetyPower source:Power consumption:DC output:AC 110 V to 240 V, 50/60 Hz12 WDC 5.0 V, 1.6 ADimensions:46 mm (W)k25 mm (H)k75.5 mm (D)Mass:Approx. 115 gSpecifications may change without prior notice.25VQT3L18
HDC-SD40&TM40GA GW GN VQT3L18 mst.book26 �１０時１７分OthersAbout copyright Carefully observe copyrightlawsRecordin
Model No. HDC-SD40 HDC-TM40 Before use, please read these instructions completely. More detailed instructions on the operation of this unit are contained in “Operating Instructions (PDF format)” in the supplied . manufactured by other companies and are not genuine Panasonic products.
panasonic hdc‐s700 1665 panasonic hdc‐sd1 1790 panasonic hdc‐sd10 415 panasonic hdc‐sd5 740 panasonic hdc‐sd60 390 panasonic hdc‐sd600k 500 panasonic hdc‐sd60k 460 panasonic hdc‐sd60s 390 panasonic hdc‐sd60s sd 555 panasonic hdc‐sd9 1000 panasonic hdc‐sdt750 1250 panasonic hdc‐sx5 995 panasonic hdc‐tm15 315 panasonic .
Figure 1-2 Reset Panasonic Phone For TGP500/TGP550 . Panasonic Configuration Guides 4/11 Figure 1-3 Reset Panasonic Phone For more detailed instructions about how to reset IP phone, please refer to Panasonic IP phone manual. Register Panasonic IP phone with MyPBX . Panasonic KX-UT123 IP phone’s MA
the user’s authority to operate this equipment. Declaration of Conformity Trade Name: Panasonic Model No.: DMC-ZS3 DMC-ZS1 Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules.
Panasonic Visio shape file contains below 3 files. Panasonic NW camera Shapes (Metric).vss (Ver.2.1 or later) Shape for Panasonic Network Cameras Panasonic_NWcamera_VISIO_manual.pdf How to use the Shapes of Panasonic NWcamera User guide Panasonic_Shape_Supporte
Panasonic KX-T7667 Panasonic Telephone Systems www.voicesonic.com Phone: 877-289-2829 Panasonic KX-T7667, Panasonic KXT7667, KX T7667, KX-T7667, KX-T7667B, KX-T7667W, KX-T7667. Outside (CO) Line button Off-hook Incoming Call Distribution Group button On
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372) email: consumerproducts@panasonic.com CANADIAN NOTICE: For Model TC-P42U1, TC-P46U1, TC-P50U1 This Class B d
Responsable: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Contact: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372) Courriel: consumerproducts@panasonic.com Note pour le Canada: Pour les modèles TC-P42U1, TC-P46U1 et TC-P50U1 Cet appareil num
dvbd2460g bts toshiba dp-2460 (d-2460) product no uom remark price quantity dvfp1670g bts panasonic fp-1670/1680 (fq-za25) dvfp7113g bts panasonic fp-7113/7115 (fq-zf15) dvfp7718g bts panasonic fp-7718/7722(fq-zk10) dvfp7728g bts panasonic fp-7728/7750(fq-zk20) dvdp1820g bts panasonic dp-1520/1820 (dq-z60j)
