PPM 808M Eight Channel Monaural Powered Mixer Spec Sheet
PPM 808MEight Channel Monaural Powered MixerMIXERPPM 808M The PPM Series mixers are comprised of threePPM 808Mcompact powered mixers, designed for portable livesound applications. Each powered mixer in the PPMSeries has two graphic equalizers, built-in stereodigital effects with 16 presets, and two FR Series HighCurrent power amplifiers. Like all Mackie mixers, the PPM Series mixers aredesigned for rugged, day-in and day-out road use.Their sturdy composite-molded case houses rugged,double-sided SMT-plated fiberglass circuit boards.Impact-resistant knobs are mounted so they “ride”just above the steel front panel. The 808M has six mono mic/line input channelsand two stereo mic/line input channels (summed tothe main bus), with XLR mic inputs and 1/4" TRS lineinputs. All mono channels have 1/4" TRS insert jacks(tip send, ring return). Each channel strip has onemonitor and one internal/external effects send, plus3-band EQ and input trim with individual level-setLEDs. A rotary volume control provides output gain foreach channel. The inputs include Mackie’s high-headroom, lownoise mic preamps. Trim controls provide 40 dB ofmicrophone gain, 20 dB of line-level gain, and a full20 dB of attenuation to “pad” hot signals. Each channel also includes a level-set LED for easy level setting. Channel EQs are as follows: 12 kHz shelving high-frequency EQ ( 15 dB), 2.5 kHz peaking mid-frequency EQ( 12 dB), and 80 Hz shelving low-frequency EQ ( 15 dB). A global phantom power switch applies 15 Vdcto pins 2 and 3 of the XLR inputs, and a break switchmutes channels 1-6 while break music is playing. Leftand right RCA tape inputs are provided with an adjacent input level control for connecting a tape deck orCD player. Both the Monitor Master and Main Master rotarycontrols have corresponding EFX controls to mix theeffects signal with the monitor and main outputs.Eight LEDs indicate the output signal level for eachmain and monitor output. Outputs include a 1/4" TRSmixer line output, a 1/4" TRS monitor line output, andleft and right RCA tape line outputs.FeaturesEight microphone/line inputsTwo stereo line inputs (on channels 7 and 8)600 W main output power amplifier600 W monitor output power amplifier9-band graphic EQ on Main andMonitor outputsEMACTM custom 32-bit precision digital stereoeffects processorTwo auxiliary sends (EFX and MON)3-band EQ on each channel1/4" and XLR connectors on each input1/4" Insert jacks on channels 1-6Two 1/4" Speaker outputs per sideRCA stereo Tape In and Tape OutCompressors (switchable) on both outputs15 V phantom powerThree-year warrantyApplicationsRestaurants and BarsMeeting RoomsChurches/SanctuariesOutdoor Gatherings(continued on page 6)Related ProductsPPM 406M and PPM 808S1OF 2 PAGES1OF 6 PAGES
MIXERPPM 808MPowered MixerPPM 808M Technical SpecificationsPPM 808MMixer SectionFrequency ResponseMic Input to Main Mixer Output (Trim at 0 dB): 0, –1 dB, 32 Hz to 20 kHz 0, –3 dB, 16 Hz to 80 kHzMic Input to Power Amp Output @ rated power output: 0, –1 dB, 32 Hz to 20 kHz 0, –3 dB, 16 Hz to 55 kHzDistortionTHD and SMPTE IMD; 20 Hz to 20 kHzMic Input to Main Mixer Output: 0.005% @ 4 dBu outputMic Input to Power Amp Output: 0.15%, 250 mW to rated powerCommon Mode Rejection Ration (CMRR)60 dB @ 1 kHz, Trim @ 0 dBNoise20 Hz to 20 kHz BW (150 Ω source impedance)Equivalent Input Noise (EIN):–127 dBuResidual Output Noise:Main Mixer, Monitor, & Effects outputsChannel & Master levels off–95 dBuMain Mixer Output Noise:Master @ nominal (–10 dB), all channels off –92 dBuMaster & 1 input channel @ nominal(–10 dB & –20 dB), Trim @ 0 dB–85 dBuCrosstalkAdjacent Inputs or Input to Output:Fader OffBreak Switch Mute–90 dB @ 1 kHz–90 dB @ 1 kHz–80 dB @ 1 kHzInput Level Trim Control Range0 to –40 dBPhantom Power 15 VdcEqualizationRumble Reduction:75 Hz, –18 dB/octaveChannel EQ:High 15 dB @ 12 kHzMid 12 dB @ 2.5 kHzLow 15 dB @ 80 HzGraphic EQ (9 bands):Q 1.414, ISO octave centers 15 dB @ 63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 kHzMain Mixer Section Rated OutputMain Mixer, Monitor, & Effects:Maximum Main Mixer Section Output:Maximum Input LevelsMic Input:–20 dBu, Trim @ 0 dB (HI) 20 dBu, Trim @ 40 dB (LOW)Line Input:0 dBu, Trim @ 0 dB (HI) 40 dBu, Trim @ 40 dB (LOW)Insert Input: 20 dBuStereo Line Input: 20 dBuTape Input: 20 dBuEffects Return: 20 dBuPower Amp In: 22 dBuInput SensitivityMinimum Input Level to produce 4 dBu @ MainMixer OutputMic Input:–68 dBuInsert Input:–28 dBuLine Input:–48 dBuStereo Line Input:–28 dBuTape Input:–18 dBuEffects Return:–18 dBuMaximum Voltage GainMic Input toInsert Output:Tape Output:Main Mixer Output:Line Input toInsert Output:Tape Output:Main Mixer Output:Stereo Line Input toTape Output:Main Mixer Output:Tape Input toTape Output:Main Mixer Output:Effects Return toMain Mixer Output:Monitor Output:Input ImpedanceMic Input:Insert Input:Line Input:Stereo Line Input:Tape Input:Effect Return:Power Amp In:40 dB60 dB72 dB20 dB20 dB52 dB20 dB32 dB10 dB22 dB22 dB22 dB3 kΩ, balanced10 kΩ, unbalanced40 kΩ, balanced10 kΩ, unbalanced10 kΩ, unbalanced10 kΩ, unbalanced10 kΩ, unbalanced 4 dBu 20 dBu2OF 6 PAGES
PPM 808MPowered MixerOutput ImpedanceMain Mixer Output:Insert Output:Tape Output:Monitor Output:Effects Send:Power Amp Out:150 Ω150 Ω150 Ω150 Ω150 Ω0.032 Ω @ 1 kHzDigital EffectsResolution:Sample Rate:Bandwidth:16-bit, 2-channel31.25 kHz15.6 kHzDamping Factor 250 @ 1 kHzAmp Input Impedance10 kΩ unbalanced, 20 kΩ balancedInput Sensitivity1.76 volts ( 7.1 dBu) for rated power into 4 ohmsGain (Amp In to Speaker Out)26.4 dB (21 V/V)Maximum Input Level9.75 volts ( 22 dBu)VU MetersMain and Monitor8 segments: Clip, 5, 0, –5, –10, –15, –20, –30Rise Time 6.2 µsSlew Rate 50 V/µsPower Amplifier SectionMaximum Power at 1% THD, midband,both channels driven600 watts per channel into 2 Ω450 watts per channel into 4 Ω300 watts per channel into 8 ΩHigh Frequency Overload and Latching:No latch up at any frequency or level.High Frequency Stability:Unconditionally stable, driving any reactive orcapacitive loadContinuous Sine Wave Average Output Power, bothchannels driven (rated power)340 watts per channel into 4 Ω from 40 Hz to 20 kHz, with nomore than 0.15% THD240 watts per channel into 8 Ω from 40 Hz to 20 kHz, with nomore than 0.10% THDTurn On Delay:3 secondsAC Power RequirementsUnited States:120 Vac, 60 HzEurope:240 Vac, 50 HzJapan:100 Vac, 50/60 HzKorea:220 Vac, 60 Hz(Capable of operation from 75% to 110% of rated linevoltage)Power Bandwidth 10 Hz to 30 kHz ( 0, –1 dB) @ rated power into 4 ΩFrequency Response 10 Hz to 30 kHz ( 0, –1 dB) 10 Hz to 55 kHz ( 0, –3 dB)DistortionTHD, SMPTE IMD:PhysicalHeight:Width:Overall Depth:Weight: 0.10% @ 8 Ω 0.15% @ 4 ΩSignal-to-Noise Ratio 105 dB below rated power into 8 ΩChannel Separation 75 dB @ 1 kHz20.5" (521 mm)OF 6 PAGES13.0" (330 mm)11.7" (297 mm)11.7" (297 mm)311.7 inches (297 mm)20.5 inches (521 mm)13.0 inches (330 mm)36 pounds (16.3 kg)
PPM 808M1U2UMONOO 15OOU 15UOOU 10OOU 10 15-15 15 10-15-15 15 10-15 15 10OO 10-15-15 15 15UUMID2.5kHzMID2.5kHz-12 12-12 12-12 12-12 12-12 12-12 12-12 12UUUUUUUULOW80Hz 15LOW80Hz-15INPUTLEVELSETNORMAL 15LOW80Hz-15INPUTLEVELSETNORMALLOW80Hz-15 15INPUTLEVELSETNORMALLOW80Hz-15 15INPUTLEVELSETNORMALLOW80Hz-15 15INPUTLEVELSETNORMALLOW80Hz-15 ERDEPTHCLIP5 20dBINSERTOO1 20dBVOLUME CH.INSERTOO2 20dBVOLUME CH.INSERTOO3 20dBVOLUME CH.OO4INSERT 20dBVOLUME CH.INSERTOO5 20dBVOLUME CH.OO6 20dBVOLUME CH.INSERTOO7 20dBVOLUME CH.LEFTLEFT8BREAK(MUTES CH 1-6)POWER AMP ROUTINGAMP 1 AMP -ZRIGHTSUMMONOMIC/LINEHI-ZRIGHT1520MIC 2MIC 3MIC 4MIC 5MIC 6MIC 71252505001K2K4K8K16K 151055CLIP00551010-1515-5808MPOWERWARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.20MAINMASTER75Hz RUMBLEREDUCTION808M2 X 600 WATTSMAINSPOWERAMP 1 INMONITORPOWERAMP 2 INTAPE INLINEOUTUMIXER LINE OUTRSERIAL NUMBERRLTAPE OUTMANUFACTURING DATEUTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.DEBRANCHER AVANT DE REMPLACER LE FUSIBLE 15LEVEL2 X 600 WATTSCAUTION- HOT SURFACE, AVOID CONTACTOF 6 PAGES30 12dBLWARNING ! THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIREDTO TAKE ADEQUATE MEASURESCONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC WOODINVILLE WA USA MADE IN USA FABRIQUE AU USA COPYRIGHT 1998 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE", "FR SERIES", AND THE "RUNNING MAN" FIGURE PATENT PENDING41015AVIS: RISCQUE DE CHOC ÉLECTRIQUE — NE PAS OUVRIRREPLACE WITH THE SAME TYPE FUSE AND RATING.DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE5UCOMPRESSORCAUTION0EFX TOMAINOUTINRISK OF ELECTRIC SHOCKDO NOT OPEN 10OOOOONLEVELU15 10MIC 8RETURN120 VAC 60HZ 325W30 12dBMONITORMASTERMONITOR EQUALIZEREFFECTSSEND1075Hz RUMBLEREDUCTION(OVERRIDES INTERNAL EFX)EFX FOOTSWITCHMIC 1MAINMONITOR5UOOPHANTOMPOWER CH 1-80EFX TOMONMAIN EQUALIZEROOVOLUME CH. 10OOOO63NORMALLEVELU15 10PARAMETERSINPUTLEVELSETHIUUUUUULOWHIDELAY 1DELAY 2DELAY 3DELAY 4CHORUSFLANGEPHASERSPRINGNORMAL 15NORMAL0LOWEFX BYPASSREVERSEGATEDCATHEDRALLG. HALLMD. HALLLG. PLATEMD. PLATESM. ROOMLOW80Hz-15 15NORMALEFXCLIPEFX WIDEHI12kHz-12 12-15012EFX DRIVELEVELUMID2.5kHz125 15 10HI12kHz 1563EFXOOMASTER OUTPUT SECTIONPOWERNORMALUUMID2.5kHzCUSTOM 32-BIT PRECISIONDIGITAL STEREO EFFECTS PROCESSING 15EFXUMID2.5kHzOOHI12kHzUU 15MONUHI12kHz-15 15OOUUMID2.5kHz 15EFXOO8UMONUHI12kHzUMID2.5kHzOOEFXOOHI12kHzU 157UMONUUUMID2.5kHzOOEFXOO6UMONUHI12kHzU 15EFXOO5UMONUHI12kHz-15 15EFX 104UMONOOEFXOO3UMONPowered MixerPOWER AMP 1 / MAINPOWER AMP 2 / MONITORSPEAKER OUTSPEAKER OUTOUTPUT POWER: 600 WATTS / CHANNELMINIMUM SPEAKER LOAD: 2 OHMS / CHANNEL
5OF 6 PAGESMIC/LINECH 1-6(#21202CJM/DF/SE)Off to 12dBINSERTEFX WIDEDAMPING/DEPTHTIME/RATEEFX SEND(INPUT LEVEL SET)0 to 40dBTRIMEFXLEVELRIGHTLEFT/MONO-20dB(INPUT LEVEL SET)0 to 40dBTRIMHIEFX BYPASSEMACDSPEFX CLIPMONITORMIDHIVOLUMEEFXFOOTSWITCHEFX RET REFX RETURNEFX RET LOff to 20dBMONITOR80 2K5 12KLO /- 15dbOff to 20dBOff to 20dBVOLUME3-BAND EQOff to 20dB3-BAND EQ80 2K5 12KMID /- 15dBLOOff to 10dBEFXTO MONITOROff to 10dBEFXTO MAINEFXOff to 10dBOff to 10dBEFXMAINMONEFXMAIN'MACKIE DESIGNSPPM808MBLOCK DIAGRAMPHANTOM(Not Availableon the 406M)STEREOCH 7-8PHANTOM75HzHPFTAPE INLEVEL 15V DCROff to 10dBTAPE INLRUMBLE FILTER75HzHPFRUMBLE FILTEROff to 12dBBREAKTAPE OUT RTAPE OUT L /- 15dB9-BAND EQ63 125 250 500 1K 2K 4K 8K 16K /- 15dB9-BAND EQ63 125 250 500 1K 2K 4K 8K 16KMAIN MASTERLEVEL Off to 12dB(MUTES CH 1-6, EFX,AND MONITOR) VDCPHANTOMMONITOR LEVEL 0-15-5-10MONITORLINE OUTMAINSPWR AMPGROUNDCHASSISGROUNDPOWERAMP 1 INRIGHT AMPLEFT AMPPWR AMPGROUNDCHASSISGROUNDPOWERAMP 2 INMAIN/MONITORAMP ROUTINGMIXERLINE OUTPOWER AMP 2/MONITORSPEAKER OUTPOWER AMP 1/MAINSPEAKER OUTPPM 808MPowered Mixer
MIXERPPM 808M(continued from page 1) The Effects Send is a 1/4" TRS jack, which outputsPPM 808MPowered Mixerthe EFX send signal from the individual channelstrips (pre-EMAC). The Effects Return is a 1/4" TRSjack, which accepts a line-level signal from an external processor. Plugging into the Effects Return jackdisables the EMAC processor so only the externaleffects processor is active. An EFX FOOT SWITCH jackallows the effects (internal or external) to be turnedon and off with a footswitch. 1/4" TRS Power Amp inputs are provided for eachpower amplifier. These are switching jacks, whichnormally route the internal main (or main/monitor)signal to the power amp inputs. If an external linelevel signal is plugged into these jacks, it breaks theinternal connection and only the external signal issent to the power amp inputs. Power amp outputs include a pair of 1/4" TS jacksfor each output. A POWER AMP ROUTING switchallows the power amps to drive the mains (MAIN/MAIN with the Power Amp Routing switch out), orallows one amp to drive the mains and one amp todrive the monitors (MAIN/MONITOR with the PowerAmp Routing switch pushed in). Each Graphic Equalizer has nine bands with 15dB of gain and centers at 63 Hz, 125 Hz, 250 Hz, 500Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz. A 75 Hzhigh-pass filter switch is included in each EQ section toreduce stage rumble or microphone-handling noise. The EMAC 32-bit digital effects processor wascustom designed by our digital engineers and rivalsthe sound of many high-quality outboard processors. The EMAC Digital Effects section includes anEFX DRIVE LEVEL control, which regulates the signallevel being sent to the EMAC effects processor fromthe individual channels’ EFX sends. The overall levelis monitored by the CLIP LED to prevent overload.Below the level control is the preset selector forpicking one of the 16 available preset effects. Thecharacteristics of these presets can be changed withthe TIME/RATE and DAMPING/DEPTH knobs. The EFXWIDE switch adds psychoacoustic “width” or “depth”to all effects except delay and phaser. The EFXBYPASS switch disables the EMAC effects. The amplifiers feature Mackie’s FR (Fast Recovery)design, which eliminates latching that can occurwhen the signal level approaches clipping. In addition, a built-in compressor can be switched on toprotect the amplifiers from input overload. To ensurelong-term reliability, the amplifiers are mounted on amassive custom-designed die-cast heat sink, whichis convection cooled and dramatically extends thelife expectancy of the heat-producing components.The 808M amplifiers deliver 600 watts per channelinto 2 ohms. The 808M chassis is constructed of an impactresistant injection-molded case with an integratedhandle on one end for easy transport.Electronic files for this product available at:www.mackie.comThis Specification SheetPPM808M SS.PDFArchitects' and Engineers' Specifications PPM808M AE.TXTOwner's ManualPPM OM.PDFLOUD Technologies continually engages in research related to product improvement. New material,production methods, and design refinements are introduced into existing products without notice asa routine expression of that philosophy. For this reason, any current LOUD Technologies product maydiffer in some respect from its published description, but will always equal or exceed the originaldesign specifications unless otherwise stated. 1999–2004 LOUD Technologies Inc. All rightsreserved. Mackie and the “Running Man” figure are registered trademarks of LOUD Technologies Inc.www.mackie.com16220 Wood-Red Road NE, Woodinville, WA 98072 USA800.898.3211, fax 425.487.4337, sales@mackie.comUK 44.1268.570.808, fax 44.1268.570.809, uk@mackie.comPart No. 091-216-00 Rev. B 09/046OF 6 PAGES
PPM 808M Powered Mixer OF 6 PAGES MIXER PPM 808M PPM 808M Powered Mixer OF 6 PAGES PPM 808M Eight Channel Monaural Powered Mixer 1 OF 6 PAGES MIXER PPM 808M . The inputs include Mackie’s high-headroom, low-noise mic preamps. Trim controls provide 40 dB of microphone gain, 20 dB of line-level gain, and a full
1 Methane 2.02% 2 Ethane 0.251% 3 Propane 997 ppm 4 Isobutane 495 ppm 5 Butane 300 ppm 6 Isopentane 173 ppm 7 Pentane 204 ppm 8 Hexane 52.6 ppm 9 Methylcyclopentane 50.1 ppm 10 Benzene 49.1 ppm 11 Cyclohexane 47.7 ppm 12 Heptane 49.0 ppm 13 Methylcyclohexane 49.2 ppm 14 Toluene 49.3 ppm 15 Octane 50.4 ppm 16 Nitrogen Balance
Nov 03, 2020 · gasoline fuel additive Uses Advised AgainstUses Advised AgainstUses Advised AgainstUses Advised Against . Toluene 108-88-3 200 ppm 20 ppm Acetone 67-64-1 1000 ppm 500 ppm Methanol 67-56-1 200 ppm 200 ppm Methyl Ethyl Ketone 78-93-3 200 ppm 200 ppm 2-Butoxyethanol 111-76-2 50 ppm 20 ppm .
Pecan nut 1 ppm 1 – 1000 ppm 5 Pistachio nut 1 ppm 1 – 1000 ppm 5 Walnut 1 ppm 1 – 1000 ppm 5 Mustard 1 ppm 1 – 1000 ppm 5 Sesame seed 1 ppm 1 – 1000 ppm 5 Multi Allergen Screen crustacean, hen’s egg, fish, cow’s milk, mustard, peanut, sesame, soy, wheat 1ppm N/A 14
Phosphonium Biocides 1 Hour Exposure 4 Hour Exposure Control THPS, 50 ppm THPS, 100 ppm TTPC, 25 ppm TTPC, 50 ppm THPS/TTPC, 5.7 x 106 2CFU/cm2 7.8 x 103 1.1 x 10 4.8 x 104 1.4 x 102 50/25 ppm 1 1.6 x 10 Control THPS, 50 ppm THPS, 100ppm TTPC, 25 ppm TTPC, 50 ppm THPS/TTPC,
PPM 406M and PPM 808M Features Eight microphone/line inputs Two stereo line inputs (on channels 7 and 8) 600 W main output power amplifier 600 W monitor output power amplifier 9-band graphic EQ on Main and Monitor outputs EMACTM custom 32-bit precision digital stereo effects processor Two auxiliary sends (EFX and MON) 3-band EQ on each channel
N-hexane 110-54-3 PEL 500 ppm 1,800 mg/m3 ACGIH Toluene 108-88-3 TWA 50 ppm Xylene 1330-20-7 TWA 100 ppm 1330-20-7 STEL 150 ppm Ethanol; Ethyl alcohol 64-17-5 TWA 1,000 ppm Trimethylbenzene 25551-13-7 TWA 25 ppm Isopentane; 2-Methylbutane 78-78-4 TWA 600 ppm Naphthalene 91-20-3
Print and copy speed (letter/A4)14 Up to 17/16 ppm Up to 17/16 ppm Up to 22/21 ppm Up to 22/21 ppm Scan speed (letter/A4)12 Flatbed scan only Up to 14 ppm Up to 26 ppm Up to 26 ppm First page out from ready mode, black (letter/A4)15 11.47 seconds 11.47 seconds 10.44 seconds 10.44 seconds First page
Choir Director: Ms. Cristy Doria Organist: Dr. Devon Howard Choir Accompanists: Madison Tifft & Monte Wilkins After the benediction, please be seated as the graduates leave the sanctuary. The classes of 2018 & 2019 are hosting an invitation-only dinner in the Fellowship Hall in honor of the graduates and their families. Special Thanks to
