LK1900B P12 E1 - JUKI
LK-1900B SeriesComputer-controlled, High-speed, Bartacking MachineHigher productivity.Low-noise and low-vibration.LK-1900B-SSLK-1900B SeriesThe machine is provided with an active tension mechanismwhich enables the electronic control of "stitching."LK-1900B-BSThe world’s firstLK-1900BBBird's nest preventing /Shorter-thread remaining functions
LK-1900B SeriesHigher productivity.Low-noise andlow-vibration.Auto-lifter mechanismutilizing a system.The machine is provided as standard with auto-lifter thatuses a stepping-motor system. This helps reduce operatorfatigue.Higher productivity.The machine achieves sewing speed of 3,200sti/min. The machine'sstarting, stopping, thread-trimming and automatic presser lifting speedshave been increased to significantly shorten total cycle time.Excellent workability and operability.(Low-noise and low-vibration)The direct-drive head (with no belt), which is directly connected to acompact AC servomotor, achieves outstanding. This head helps create acomfortable working environment with reduced vibration and noise.The arm section of the machine head is fitted with a hand pulley. Thisallows the operator to visually check the needle entry points.Excellent seam quality.Needle thread grasping mechanism helps produce consistent knot tyingat the beginning of sewing. (This device has been factory-set to “invokingprohibited” status at the time of delivery.)Many different sewing patterns.The machine is provided as standard with 51 different sewing patterns.The machine permits easy changeover of sewing patterns for effortlessexecution of an inexhaustible range of sewing specifications. For LK-1900BB, the standard no. of sewing patterns is 50.The LK-1900B is also able to sew buttons using the same data used forthe LK-1900 (EP-ROM).The sewing starting point can be corrected.In cases where the needle entry point for button sewing is to becorrected, the sewing starting point can be corrected without theadjustment of the relevant mechanism.Active tensionIt is also possible to change over the stroke of the auto-lifterfrom a onestep stroke to a double-step stroke, which offerseasier positioning of a material on the machine. For thedouble-step stroke, an intermediate stopping height can beestablished on the operation panel.The work clamp foot lift can be set to a maximum of 17mm.(Standard 14mm)Oil stains are eliminated.Thanks to our advanced dry-head technology, the frame(needle bar and thread take-up) no longer requireslubrication. This prevents the material from being stainedwith lubricating oil.Just a small quantity of clean oil is supplied from the oil tankto the hook.Eco-friendly power savingAn encoder is installed in the pulse motor, therebyachieving substantially improved power-consumptionsaving.The machine is provided as standardwith the active tension(electronic thread tension control mechanism).Since the machine is provided with an active tensionmechanism, it is able to set a needle thread tension thatmatches various sewing conditions (such as thread,material and sewing speed) on the operation panel, storethe data in memory and reproduce it.The needle thread tension can be separated according tostitching type or portion of a seam, such as the beginningpart of the seam, base stitched part, zigzag stitched partand end of the seam (fastening stitch).When the operation panel IP-420U is used in combinationwith the active tension, the needle thread tension can be seton a stitch-by-stitch basis. This helps eliminate undesiredthread tension variations at a multi-layered part of a materialor with sewing direction, thereby contributing to upgradedseam quality.Many different models are prepared according to the type of materials.STANDARD LIQUID CRYSTAL PANEL (NEW)The LK-1900B model comes in five different subclass models, such as S type (standard), H type (for heavy-weight materials), F type (for foundation), M type (for knits and knitted materials) ,W type (with a large shuttle hook for heavy-weight materials) and (bird's nest preventing /shorter-thread remaining functions) , to offer a choice according to any application.Functional settings, such as pattern numbers and needle thread tensionscan be established through the operation panel with ease. Distancebetween holes in a button can be easily changed by means of patternenlargement/reduction feature.The needle's penetrating force into the material has been increased. This provides an improved responsiveness to heavy-weight materials for the H type machine.The W type has adopted a large shuttle hook, which reduces the frequency of bobbin-thread changing to enable highly efficient sewing work.Standard sewing patterns can be assigned to pattern keys P1 to P50. Anyof the sewing patterns assigned to the P1 to P25 pattern keys can beactivated with a touch of the corresponding key. This means thatworkability is improved by assigning 25 sewing patterns that are mostfrequently used to those pattern keys.As many as 99 different cyclesewing patterns, each of whichcombines a maximum of 99different sewing patterns, canbe stored in the memory.USB portS type (Bartacking pocket lip of suits)H type (Bartacking crotch of jeans)F type (Attaching the shoulder straps to brassier)M type (Bartacking shoulder of running shirt) Presser foot for vertical bartacking is supplied with the unit as an accessory.12
Computer-controlled, High-speed Bartacking Machine for Eyelet ButtonholesComputer-controlled, High-speed, Bartacking Machinewith bird's nest preventing / shorter-thread remaining functionsLK-1900BBLK-1901BThe world’s firstThanks to the Bird's nest preventing/shorter-thread remainingfunctions, manual thread-nipping is no longer required and givessoft and smooth feeling on the bartaking sections where directlycontact skin such as brassieres and tank tops.LK-1901B-SSThe machine ensures high-quality bartacks on eyelet buttonholes.Bird's nest preventing /Shorter-thread remaining functionsThe machine is provided with a material-drawing mechanism which draws the right and left parallel portions of an eyelet buttonhole near to oneanother.The machine performs bartacking with the right and left parallel portions of the eyelet buttonhole drawn near to one another after the buttonholeis clamped under the work clamp foot, thereby finishing highly durable and well-tensed eyelet buttonholes.The sewing pattern best suited to the sewing product to be bartacked can be selected by single-key operation.Three different sewing patterns are prepared to enable easy switchover of sewing sizes. If the sewing patterns are assigned to the patternkeys on the operation panel, the sewing patterns can be called up or changed with single-key operation.The machine sews the most optimally suited bartacks on eyelet buttonholes on the front bodies of garments and straight buttonholes that differin stitch number and size on jacket lapels, thereby improving the finished quality of sewing products.The material drawing mechanism can be switched to ON/OFF.LK-1900B-BSThe material drawing amount can be adjusted to 3mm at maximum. The material drawing mechanism can be switched ON/OFF in accordancewith the setting of the memory switch. With these features, the material drawing mechanism can be used with greater flexibility.The sewing machine eliminates so-called "bird's nests"(thread tangling in on the wrong side of the material at the beginning of sewing).The thread is retained at the beginning of sewing and any excess thread is trimmed during sewing. As aresult, the length of thread sewn in the seam is shortened, thereby achieving high-quality sewingperformance while preventing thread from tangling in on the wrong side "of the material."Computer-controlled, High-speed Belt-loop-attaching MachineShorter-threadremainingLength of thread remaining on the materialat the end of sewing has been reduced to 2 mm or less .The newly-developed shorter-thread remaining mechanism trims the thread shorter after the regular threadtrimming operation. Additionally, thread waste produced by thread trimming is withdrawn by suction. Thanksto this mechanism, the trouble of manual thread nipping is avoided.Finishing of the Bird's nestpreventing/shorter-thread remainingfunctions (on the wrong side)LK-1902B Use #60-80 (TEX22-30) polyester spun threadComputer-controlled, High-speed, Bartacking MachineLK-1900BLK-1900B-SS3With its broadly curved feed bracket (presser arm), the machine permitseasy placement of the material to be sewn. The slimly shaped bed andhead design that allows free space under the arm demonstrates greateroperability in handling materials on the machine and continuous processes.These features contribute substantially to increased productivity in belt-loopattachment 22.8LK-1902B-SSLK-1902B-HS135444657Provided asstandardNumberof patternFeed plateFor large size1354550427.41027OptionFor extralarge size221354580113547161372.8The machine head has been designedwith an emphasis on operability.Work clampfoot2.4The machine is provided as standard with six different linear bartackingpatterns. Since the sewing size can be easily changed, the optimal numberof stitches and sewing size can be speedily selected according to thebelt-loop width. If the normally used patterns are assigned to the patternskeys, a desired pattern can be called up or changed with single-keyoperation.WORK CLAMP FOOT AND FEED PLATE FOR LK-1902B(for belt-loop attaching)7The sewing pattern best suited to the sewing productto be bartacked can be selected by single-key operation.2.4The machine is highly productive and provided asstandard with 51 different sewing patterns. This is anexcellent high speed computer-controlled bartackmachine which anables to register as many as 99 cyclesof which each cycle can contain 99 sewing patterns aswell as good responsiveness to various sewing patterns.LK-1902B-SS7The machine achieves sewing speed of3,200sti/min The machine's thread-trimming etc.have been increased to significantly shortentotal cycle time.3741.5221354700537.4 A finger guard is included in the presser foot.4
2.51116446 013343161213354810714035(Note 2.02.06686888Lengthwise linear bartacking7112839252.54345252.5(Note 2)42No. of workclamp footNumber 28285112028907039305(Bottom)(Top)6(Top) 25(Top)1020Knit goods bartacking Large size bartacking3.03648200(Note) 1. Sewing size shows the dimensions when the scale rate is 100%.2. Refer the No. of work clamp foot to the separate table of work clamp foot.3. For No. 22, modify the work clamp foot blank for use.4. Use the patterns with marks for sewing denim.5. No.51 is the pattern No.1 without thread clamp.6. For LK-1900BB, the pattern No.51 is not selectable.28Round bartacking56(Top) 209, ottom) 28(Bottom)1(Top)323(Top)82(Top)10Lengthwise bartacking2.0(Note 2)No. of workclamp footCrosswise63436Small bartacking062321 2973284113625157Large bartacking2523019151028(Bottom)Large bartacking7(mm)Crosswise31 10Stitch diagramSewing sizeLengthwise32312Lengthwise bartacking31723427No.ø124016Radial tacking1021Semilunar bartacking2.0(mm)1Linear bartacking2Sewing sizeLengthwise10Stitch diagramNumber ofstitches011(51)No.(Note 2)Crosswise(mm)No. of workclamp footSewing sizeLengthwiseNumber ofstitches16Stitch diagramNo.(Note 2)2.0No. of workclamp foot(mm)CrosswiseStitch diagramSewing sizeLengthwiseNo.Number ofstitchesTABLE OF THE STANDARD PATTERNSø8491485016415486
TABLE OF THE WORK CLAMP FOOT1411640414116800(without knurl) (without knurl)HSInstalled onmachine ��Installed onmachine head—Installed onmachine head ——————Installed onmachine head———— Option—OptionInstalled onmachine (with SSSS (standard)————OptionOptionOptionOptionH ion Supplied withmachine as accessory OptionOption————M (knitted materials)————————W(with large hook,heavy-weight materials————————BS (Bird's nest preventing /Shorter-threadremaining functionsBird's nest preventing /Shorter-threadremaining nSupplied withmachine as accessory OptionOption————BF ())) For the foundation type (F-type) sewing machine for the European market, the work clamp foot No. 2 is installed on the machine head and the work clamp foot No. 9 is supplied with themachine as an accessory (packed together) (note that the work clamp feet No. 3 and No. 10 are not supplied with the machine).7 Install a finger guard suitable for each work clamp foot when replacing the work clamp foot.PK-57 [Part No. M85205800A0][Part No. GPK570010B0] To connect the cable asm. to the electrical box,conversion cable (separately available) is necessary. To connect the cable asm. to the electrical box,conversion cable (separately available) is necessary.Pedal switch conversion cable asm.Pedal switch conversion cable asm.[Part No. M90125900A0][Part No. M90135900A0]IP-420UOperation panel provided with programmable functionsThe IP-420U is a new operation panel configuredwith a "input function" not available in standard panel.Input and edit data while observing the needle-entry points visually.FF (foundation)2-pedal unit for standing work .440158195.4)4ø10ø1.416.62.440021879(with knurl)9.4242340021876(with knurl)5040021873(with knurl)2ø15.6104523.53320235450402314.4154Feed 137707(without knurl) (without knurl) (without knurl) (without knurl)ø114212Foot pedal for standing work (optional)14137509(Right) 40021871(Right) 40021874(Right) 40021877(Right) 40021880(Right)14137608(Left) 40021872(Left) 40021875(Left) 40021878(Left) 40021881(Left)24.113561360(asm.)29Installed onmachine head12—Simple work clamp kit Part No.: 40057279 The work clamp cover plates(right and left) are not included in the kit.——5.6Applicationcode26224204Installed onmachine headWorkclampfoot(32.8S13571955(asm.)Bird's nest preventing /BS Shorter-threadremaining functionsFinger guard 17.518.54.8M45No. of workclamp 11.421.2The lever for lifting the work clamp can be independently slidback and forth.The machine parts can be adjusted and replaced entirely byhand without screwdrivers or others tools. Changing parts isnow a "clean-hands" procedure.F—Conventionally, the front plate has to be removed to change the work clamp.With the new work clamp kit, the work clamp can be changed without removing the plate.14116602F2060BF ()))13554803S—M (knitted materials)10222928F (foundation)BS (13548003for the LK-1900B Series9H (heavy-weight)materials13542451(asm.)2941S (standard)Bird's nest preventing /Shorter-threadremaining functionsBird's nest preventing /Shorter-threadremaining le work clamp kit25Finger guard with large hook,heavy-weight materials13548151(asm.)2517.5Feed orkclampfoot613548557(asm.) No. of workclamp footOPTIONThe operator can easily check the shape of the pattern displayed on the wide liquid crystal panel.Make minor adjustments to data quickly and efficiently. Overall use is easier than ever before.The memory storage capability of the main body of the sewing machine has been dramaticallyenhanced. Now the USB-ready main body of the sewing machine uses many different kinds of media. Inaddition to the Compact Flash card, the main body of the sewing machine is provided as standard witha USB connector. Now, data can be input/output to/from various kinds of media (SD (Secure DigitalCard), CF (Compact Flash), SM (Smart Media), FD (floppy disks) etc.) by means of a USB thumb deviceand a card reader. IP-420U should be ordered as a part.IP-420U [Part No. 40144886]Panel cable asm. [Part No. 40065566]8
TABLE OF THE OPTIONAL PARTSSPECIFICATIONSPart nameTypeWithout knurl/with platingFeed plate blankt 1.2t 0.5 Stainless steelWork clamp footface plate (asm.)Part No.Sewing area 20 40Sewing area 20 4014120307Without knurl/stainless steel Sewing area 20 4014120505Without knurl/with platingSewing area 30 4040021855Without knurl/without platingSewing area 30 4040021856Sewing area 30 4040021857With knurl/with platingSewing area 30 4040021858With knurl/without platingSewing area 30 4040021859Without knurl/stainless14121263Face plate for presser blankPresser blankWith knurl/with plating (right)Sewing area 20 4014121701With knurl/with plating (left)Sewing area 20 4014121800With knurl/with plating (right)Sewing area 30 4040021851With knurl/with plating (left)Sewing area 30 4040021852With knurl/without plating (right)Sewing area 30 4040021853With knurl/without plating (left)Sewing area 30 4040021854With knurl/with plating (right)40021869With knurl/with plating (left)40021870ApplicationMax. sewing speedSewing areaStitch lengthNeedle bar strokeLift of the work clamp footAuto-lifterNeedle thread tensionNeedle (at the time of delivery)HookNumber of stitchesthat can be stored in memoryNumber of standard patternsNumber of data that can be tandardFor heavy-weightmaterialsFor foundationFor knits andknitted materialsWith large hookfor heavy-weightmaterials2,700sti/min 3,200sti/min 30mm (L) 40mm (W)0.1 10mm (0.1mm step)41.2mmStandard 14mm (17mm when the reverse-rotation needle-up function)Provided as standard (stepping motor type)Active tension (electronic thread tension control system)DP 5 (#14)DP 17 (#21)DP 5 (#11)DP 5 (#11)DP 17 (#21)Standard shuttle hookLarge shuttle hookMax. 20,000 stitches51 patterns200 patterns (for up to 150 patterns, sewing data can be added.)20 200% (1% step), Pattern enlargement/reductioncan be done by increasing/decreasing the stitch lengthInternal-organs memoryProvided as standard (up/down method)Hook: minute-quantity lubricationJUKI New Defrix Oil No.2 (equivalent to ISO VG32)450W compact AC servomotor (direct-drive system)250VAMachine head (include motor) 42kg, Control box 5.6kgEnlarging/Reducing facilityMemory methodBobbin thread counterLubricationLubricating oilSewing machine motorPower consumptionWeight714 1436Model nameNeedle hole guideA 1.6 B 2.6 With relief slit Standard typeB2426280000A 1.6 B 2.0 Without relief slit F and M typesD2426282C00A 2.3 B 4.0 Without relief slit for heavy-weight material14109607øAøBA 2.7 B 3.7 Without relief slit for extra heavy-weight materialD2426MMCK00A 56.5 B 6413533104A 59 B 74 For extra-large bartacking13548300AFinger guard (1)BA13573407Finger guard (3)A 21.5 B 35.5 L 67 For lengthwise B-HSApplicationStandardFor foundationStandardStandardFor heavy-weightmaterialsMax. sewing speedSewing areaStitch lengthNeedle bar stroke3,200sti/min 30mm (L) 40mm (W)0.1 10mm (0.1mm step)41.2mmStandard 11mm(by using the reverse-rotationneedle-up function 14mm)3,000sti/min 30mm (L) 40mm (W)0.1 10mm41.2mmStandard 14mm(by using the reverse-rotationneedle-up function 17mm)Provided as standard(stepping motor type)Active tension(electronic thread tension control system)Provided as standard(stepping motor type)Active tension(electronic thread tension control mechanism)Lift of the work clamp footNeedle thread tensionApplicable pattern numberNumber of data that can be inputFinger guard (4)14120000Enlarging/Reducing facilityALBA 21.5 B 35.5 L 58.5 For specially ordered work clampSM8040302TPPart nameSilicon oil pipeMemory methodMaterial drawing amountBobbin thread counterLubricationFeatureThe silicon oil pipe are the parts which cool the heat of a needle.TypeSilicon oil pipeRubber plugOil feltLubricating oilPart No.40040910TA1050504R013501705Silicon oil thread guideB1127280000Screw 11/64 - 40 L5SS4110515SPSilicon oil pouring hole13501408Belt-loop attaching machineLK-1901B-SSNeedle (at the time of delivery)HookNumber of stitchesthat can be stored in memoryBEyelet buttonholebartacking machineLK-1900B-BFAuto-lifterA 66.5 B 43 For lengthwise bartackingBird's nest preventing /Shorter-thread remaining functionsLK-1900B-BSFinger guard (2)9LK-1900B-SS22Work clampfoot blank724t 3.214120109With knurl/with platingsteel Model nameSewing machine motorPower consumptionWeightAir consumptionDP 17 (#14)DP 17 (#11)Standard shuttle hookDP 5 (#14)Max. 20,000 stitches50 patterns200 patterns (for up to 150 patterns,sewing data can be added.)20 200% (1% step),Pattern enlargement/reduction can be doneby increasing/decreasing the stitch lengthInternal-organs memory—Provided as standard (up/down method)Hook: minute-quantity lubricationJUKI New Defrix Oil No.2(equivalent to ISO VG32)450W compact AC servomotor(direct-drive system)250VAMachine head (include motor) 42kg,Control box 5.6kg6 L/cycle “sti/min” stands for “Stiches per Minute” CompactFlash or CFA specification compatible media. “CompactFlash ” is a registered trademark of SanDisk Corporation, U.S.A. Other company names and product names/brand names are trademarks or registered trademarks of the respective companies.DP 5 (#14)Standard shuttle hookDP 17 (#21)Max. 20,000 stitches11, 12, 1317, 18 (19, 20, 21, 22*)*This device has been factory-set to“ invoking prohibited ” status at the time of delivery.200 patterns (for up to 150 patterns,sewing data can be added.)20 200% (1% step),Pattern enlargement/reduction can be doneby increasing/decreasing the stitch lengthInternal-organs memoryMax. 3mm—Provided as standard (up/down method)Hook: minute-quantity lubricationJUKI New Defrix Oil No.2(equivalent to ISO VG32)450W compact AC servomotor(direct-drive system)250VAMachine head (include motor) 42kg,Control box 5.6kg—10
WHEN YOU PLACE ORDERSPlease note when placing orders, that the model name should be written as follows:Machine headControl boxBartackingHead typeLK1900BApplicationCode000Work clamp footCodeStandardSStandardSFor heavy-weight materialsHFor foundationFFor foundationFFor knits and knitted materialsMWith large hookfor heavy-weight materialsWBird's nest preventing /Shorter-thread remaining functionsBAttachmentCodeStandard0Bird's nest preventing /Shorter-thread remaining functions2CodeNot provided000 For foundation "F" type canbe selected only sewingspec:"B" type.MC67Power supply3-phaseSingle-phaseCodeOperation panel200 240VEStandard panel200 240VKOption panelCE 200 240V(not provided withpower switch)CodeSSIP420UNEyelet buttonhole bartackingLK1901BSS000ApplicationStandardCodeSWork clamp footStandardCodeSAttachmentNot providedCode000Belt-loop attachingLK1902B S000ApplicationCodeStandardSFor heavy-weight materialsHJUKI ECO PRODUCTSWork clamp footStandardCodeSAttachmentNot providedCode000To order, please contact your nearest JUKI distributor.The LK-1900B Series is an eco-friendly product which complies withJUKI ECO PRODUCTS standards for protecting the environmentThe sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use ofhazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive.This sewing machine reduces power consumption by 15% as compared with the conventional models.For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco e/index.htmlThe RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.Head OfficeRegistered Organization :The Scope of the Registration : The activities of research,development, design, sales, distribution, and maintenanceservices of industrial sewing machines, household sewingmachines and industrial robots, etc., including sales andmaintenance services of data entry systems.2-11-1, TSURUMAKI, TAMA-SHI,TOKYO 206-8551, JAPANSEWING MACHINERY BUSINESS UNITPHONE : (81) 42-357-2254FAX : (81) 42-357-2274http://www.juki.comSpecifications and appearance are subject to change without prior notice for improvement.Read the instruction manual before putting the machine into service to ensure safety.This catalogue prints with environment-friendly soyink on recycle paper.SEPTEMBER, 2015 Printed in Japan (TN)
The machine is provided with a material-drawing mechanism which draws the right and left parallel portions of an eyelet buttonh ole near to one another. The thread is retained at the beginning of sewing and any
juki mbh-180 3 1 gold 1 white juki mh-481 12 gold juki mh-481-5 1 full auto juki mh-484 1 gold juki mo-3916 4 juki mo-3904 1 juki mo-3914 1 juki mo-6704 1 juki mo-6814 new 6 7 are demo juki mo-6816 new 1 juki mo-6900 1 juki mof-3904 1 juki mog-2504 1 juki mog-2505 1 carpet serger
Juki MBH-180 Chainstitch Buttonhole Juki Programable Trackers AMS-220A BY ORDER OF A LEADING CAP AND HEADWEAR MANUFACTURER Live Webcast Made Available Thanks To: Juki DDL-5550-7 Single Needle Lockstitch Juki LK-1900 Electronic Bartacker Consew 223 Single Needle Lockstitch, Cylinder Arm Union Special 56500 Two Needle Chainstitch Brother LZ-B856E
12,769 6 19 6,429 275 12,766 1 22 6,478 270 12,768 4 16 6,451 265 12,770 8 7 6,406 256 12,771 6 49 6,405 272 12,766 10 19 6,393 271 12,769 3 6,388 255 p12,770 p 10 6,391 256 p12,770 p 11 6,331 270 p12,765 6,292 277 p12,763 6,265 299 年 10月1日現在 月 1日 現在 313,808 101.8 103.1
RTE-P12-24V RTE-P1AF20 100 - 240V AC 8 Pin RTE-P11-AC120V RTE-P12-AC120V RTE-P1D12 12V DC 8 Pin RTE-P11-12V RTE-P12-12V RTE-P2AD24 24V AC/DC 11 Pin RTE-P21-24V RTE-P22-24V RTE-P2AF20 100 - 240V AC 11 Pin RTE-P21-AC120V RTE-P22-AC120V RTE-P2D12 12V DC 11 Pin RTE-P21-12V RTE-P22-12V Part Number
March 10, 2014 The task of determining the net force acting upon an . in your Hilroy scribbler. P12 Inclined Planes.notebook 20 March 10, 2014. P12 Inclined Planes.notebook 21 March 10, 2014 Friction and Inclined Planes The force of friction must e
PLN-985U Long Arm Sewing Machine LU-2216N-7, 2266N-7 LG-158-1U, 158U TSC-461U Flat-bed Sewing Machine for . This is a newly designed JUKI's unique lockstitch machine. The machine is able to sew at a pitch as long as 7mm for both normal and reverse feed directions.
For JUKI, the best CS is achieved by listening to customers and developing proposals from new points of . LG-158-1U, 158U TSC-461U. Needle Feed Hook Horizontal-axis hook (large) Horizontal-axis hook (3-fold-capacity) Vertical-axis hook (large) 2-needle Organized split needle bar Bottom-feed
Grade 2 ELA Curricular Frameworks with ELL Scaffolds . Grade 2 Unit 2 Reading Literature and Reading Informational Unit 2: RL.2.1, RI.2.1, and WIDA Standards . Reading Literature and WIDA Standards Reading Informational Text and WIDA Standards Critical Knowledge and Skills WIDA Criterion RL.2.1. Ask and answer such questions as who, what, where, when, why, and how to demonstrate .
