Instructions For Use LUX Coupling 460 LE - 1.001.7599 .
Instructions for useMULTIflex coupling 460 E - 1.001.7600 MULTIflexLUX coupling 460 LE - 1.001.7599Always be on the safe side.
Distributed by:KaVo Dental Corporation11729 Fruehauf DriveCharlotte, NC 28273 USATel.: 847 550 6800Fax: 847 550 6825Manufacturer:Kaltenbach & Voigt GmbHBismarckring 39D-88400 Biberachwww.kavo.com
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.7599Table of contentsTable of contents1 User instructions. 42 Safety. 52.1 Description of safety instructions. 52.2 Safety instructions. 53 Product description. 73.1 Purpose – Intended use. 73.2 Technical data MULTIflex coupling 460 E. 73.3 Technical data MULTIflex LUX coupling 460 LE. 73.4 Transportation and storage conditions. 84 First use. 95 Operation. 105.1 Connecting the MULTIflex (LUX) coupling to the hose. 105.2 Changing the instruments. 106 Troubleshooting. 116.1 Check for malfunctions before initial startup. 116.2 Troubleshooting. 116.2.1 Replacing the high-pressure lamp. 116.2.2 Exchanging the O-rings. 117 Preparation methods according to ISO 17664. 137.1 Preparations at the site of use. 137.2 Cleaning. 137.2.1 Manual cleaning - external. 137.2.2 Automated external cleaning . 137.2.3 Manual cleaning of the inside. 137.2.4 Automated internal cleaning. 137.3 Disinfection.7.3.1 Manual disinfection - external.7.3.2 Manual disinfection - internal.7.3.3 Automated disinfection of the inside and outside .131414147.4 Drying. 147.5 Sterilisation. 147.6 Storage. 148 Tools. 159 Warranty terms and conditions. 163 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75991 User instructions 1 User instructionsDear UserCongratulations on purchasing this KaVo quality product. By following the instructionsbelow you will be able to work smoothly, economically and safely. Copyright by KaVo Dental GmbHSymbolsRefer to the chapter on Safety/Warning symbolImportant information for users and service techniciansAction requestNon-sterilisableTarget groupThis document is intended for dentists and their assistants. The section on starting upis also intended for service technicians.4 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75992 Safety 2.1 Description of safety instructions2 Safety2.1 Description of safety instructionsWarning symbolStructureDANGERThe introduction describes the type and source of the hazard.This section describes potential consequences of non-compliance. The optional step includes necessary measures for hazard prevention.Description of hazard levelsThe safety instructions listed here, together with the three levels of danger will helpavert property damage and injury.CAUTIONCAUTIONindicates a hazardous situation that can cause damage to property or mild to moder‐ate injuries.WARNINGWARNINGindicates a hazardous situation that can lead to serious or fatal injury.DANGERDANGERindicates a maximal hazard due to a situation that can directly cause death or fatalinjury.2.2 Safety instructionsWARNINGHazard from direct exposure to radiation.Blinding. Do not look directly into the lamp.CAUTIONPremature wear and malfunctioning from improper storage during long peri‐ods of nonuse.Reduced production time. The product must be cleaned and stored dry if it has not been used for a long pe‐riod.5 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75992 Safety 2.2 Safety instructionsNoteAny waste which is generated must be recycled or disposed of in strict compliancewith all applicable national regulations in a manner which is safe both for peopleand the environment.If you have any questions regarding proper disposal of the KaVo product, pleasecontact the KaVo branch.The following individuals are authorized to repair and service KaVo products: Technicians at KaVo branches throughout the world Technicians specially trained by KaVoService may only be provided by repair shops that have undergone training by KaVoand that use original KaVo replacement parts.6 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75993 Product description 3.1 Purpose – Intended use3 Product descriptionMULTIflex coupling 460 E (Mat. no. 1.001.7600)MULTIflex LUX coupling 460 LE (Mat. no. 1.001.7599)3.1 Purpose – Intended usePurpose:The MULTIflex (LUX) / MULTIflex LED coupling is an accessory of the medical devicedesigned for coupling the supply hose to MULTIflex-compatible dental turbines. Anyother type of use or alteration to the product is impermissible and can be hazardous.Proper use:According to these regulations, the MULTIflex (LUX) / MULTIflex LED coupling mayonly be used for the specified application by a knowledgeable user. You need to com‐ply with the following: the applicable health and safety regulations the applicable accident prevention regulations these Instructions for useAccording to these regulations, the user is required to: only use equipment that is operating correctly, adhere to the specified intended use protect him or herself, the patient and third parties from danger, and avoid contamination from the product.3.2 Technical data MULTIflex coupling 460 EConnection in accordance with EN ISO 9168 type 3.With return suction stop.All KaVo (LUX) handpieces featuring an original MULTIflex connector can be attach‐ed.3.3 Technical data MULTIflex LUX coupling 460 LEConnection in accordance with EN ISO 9168 type 3.7 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75993 Product description 3.4 Transportation and storage conditionsWith return suction stop.Operating voltage of the high-pressure3.0 to 3.35 V DC (KaVo recommends 3.2lampV DC)High-pressure lamp powermax. 2.5 WattAll KaVo (LUX) handpieces featuring an original MULTIflex connector can be attach‐ed.NotePlease comply with the Instructions for Use of the product coupled to the MULTIflex(LUX) / MULTIflex LED coupling. Ascertain the suitability of the product for use withthe MULTIflex (LUX) / MULTIflex LED coupling.3.4 Transportation and storage conditionsCAUTIONIt is hazardous to start up the product after it has been stored refrigerated.This can cause the product to malfunction. Prior to start-up, very cold products must be heated to a temperature of 20oC to25oC (68oF to 77oF).Temperature: -20 C to 70 C (-4 F to 158 F)Relative humidity: 5% RH to 95% RH absence of condensationAir pressure: 700 hPa to 1060 hPa (10 psi to 15 psi)Protect from moisture8 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75994 First use 3.4 Transportation and storage conditions4 First useHazard from non-sterile products.WARNINGInfection hazard for care provider and patient. Before first use and after each use, prepare and sterilise the medical device andaccessories accordingly.WARNINGDisposal of the product in the appropriate manner.Prior to disposal, the product and accessories must be appropriately prepared orsterilised if this is necessary.CAUTIONDamage from soiled and moist cooling air.Contaminated and moist cooling air can cause malfunctions. Make sure that the supply of cooling air is dry, clean and uncontaminated accord‐ing to ISO 7494-2.9 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75995 Operation 5.1 Connecting the MULTIflex (LUX) coupling to the hose5 OperationNoteAt the beginning of each workday, the water-conducting systems should be rinsedfor at least 2 min. without the instrument being attached; if there is a risk of contami‐nation from reflux or back suction, the system must be rinsed for 20-30 seconds.5.1 Connecting the MULTIflex (LUX) coupling to the hose Plug the MULTIflex (LUX) / MULTIflex LED coupling onto the turbine hose andtighten it firmly using the union nut of the hose. Re-tighten with the enclosed wrench. Spray the O-Rings lightly with KaVo Spray.NoteThe coupling remains screwed onto the hose. Use the key if it is to be removed.5.2 Changing the instrumentsWARNINGDetachment of the medical device during treatment.A medical device that is not properly locked in place can release from the MULTIflex(LUX) / MULTIflex LED coupling during treatment. Before each treatment, check if the medical device is securely locked onto theMULTIflex (LUX) / MULTIflex LED coupling by pulling on it.CAUTIONInexact coupling.Reduces the service life of the lamp. Avoid inexact coupling. Check the secure fit of the (LUX) handpieces on the coupling by pulling on them. Plug the MULTIflex (LUX) handpiece onto the MULTIflex (LUX) / MULTIflex LEDcoupling in exact orientation and push it backward until the coupling can be heardto snap into place in the medical device. Check the secure fit of the MULTIflex (LUX) handpiece on the coupling by pullingon it.10 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75996 Troubleshooting 6.1 Check for malfunctions before initial startup6 Troubleshooting6.1 Check for malfunctions before initial startupCAUTIONDanger due to hot bulb.Burning hazard. Do not touch the bulb after it has been used. Let the lamp cool off.Missing or damaged O-rings.CAUTIONMalfunctions and premature failure. Make sure that all O-rings are on the coupling and undamaged.NoteStop working if the O-ring is missing or damaged.6.2 Troubleshooting6.2.1 Replacing the high-pressure lampCAUTIONDanger due to hot bulb.Burning hazard. Do not touch the bulb after it has been used. Let the lamp cool off.NoteInserting the lamp, make sure that the contacts in the coupling are not damaged.Screw-on the screw cap. Unscrew the screw cap in counterclockwise direction. Take lamp from the mount. Insert the new lamp very carefully.6.2.2 Exchanging the O-ringsCAUTIONHazard from improper care of the O-rings.Malfunctions or complete failure of the product. Do not use Vaseline or other grease or oil.NoteThe O-ring on the coupling may only be lubricated with a cotton ball wet with KAVOspray.If the coupling is not tight, change the O-rings.11 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75996 Troubleshooting 6.2 Troubleshooting Press the O-ring between your fingers to form a loop. Shove the O-ring to the front, and remove it. Insert new O-rings into the grooves and spray with KaVo Spray.12 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75997 Preparation methods according to ISO 17664 7.1 Preparations at the site of use7 Preparation methods according to ISO 176647.1 Preparations at the site of useWARNINGHazard from contaminated products.An infection hazard exists from contaminated products. Observe suitable personal protective measures. Remove all residual cement, composite or blood without delay. The product should be reprocessed as soon as possible after treatment. The product must be dry when transporting it to the site of reprocessing. Do not place it in a solution or similar.7.2 CleaningCAUTIONMalfunctions from cleaning in the ultrasonic unit.Defects in the product. Only clean manually!7.2.1 Manual cleaning - externalAccessories required: Tap water 30 oC 5 oC (86 oF 10 oF) Brush, e.g. medium-hard toothbrush Brush off under flowing tap water.7.2.2 Automated external cleaningNot applicable.7.2.3 Manual cleaning of the inside Rinse the spray air and spray water tube with tap water.7.2.4 Automated internal cleaningNot applicable.7.3 DisinfectionCAUTIONMalfunctioning from using a disinfectant bath or chlorine-containing disinfec‐tant.Defects in the product. Disinfect manually only!13 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75997 Preparation methods according to ISO 17664 7.4 Drying7.3.1 Manual disinfection - externalKaVo recommends the following products based on material compatibility. The micro‐biological efficacy must be ensured by the disinfectant manufacturer. CaviCide made by MetrexRequired tools: Cloths for wiping off the product. Spray the disinfectant on a cloth then wipe the product and let it work according tothe disinfectant manufacturer. Follow the instructions for use of the disinfectant.7.3.2 Manual disinfection - internalNot applicable.7.3.3 Automated disinfection of the inside and outsideNot applicable.7.4 DryingManual Drying Blow off the outside and inside with compressed air until water drops are no lon‐ger visible.Automatic DryingNot applicable.7.5 SterilisationNon-sterilisable.7.6 Storage Reprocessed products should be stored protected from dust with minimum expo‐sure to germs in a dry, dark and cool space.14 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75998 Tools 7.6 Storage8 ToolsAvailable from dental suppliers.Material summaryMat. no.Key0.411.1563Spare seal 460 E0.553.1872Spare seal 460 LE0.553.5262High pressure lamp 460 LE0.553.3881KaVo MULTI LED lamp1.002.2928O-Ring large1.004.2776O-Ring small1.004.277515 / 18
Instructions for use MULTIflex coupling 460 E - 1.001.7600 MULTIflex LUX coupling 460 LE - 1.001.75999 Warranty terms and conditions 7.6 Storage9 Warranty terms and conditionsThe following warranty conditions apply to this KaVo product:KaVo provides the end customer with a warranty of proper function and guaranteeszero defects in respect of material and processing for a period of 24 months from thedate of the invoice, subject to the following conditions:In case of justified complaints, KaVo will honour its warranty with a free replacementor repair. Other claims of any nature whatsoever, in particular with respect to compen‐sation, are excluded. In the event of default, gross negligence or intent, this shall onlyapply in the absence of mandatory legal regulations to the contrary.KaVo shall not be liable for defects and their consequences that have arisen or mayarise from natural wear, improper handling, cleaning or maintenance, non-compliancewith operating, maintenance or connection instructions, calcination or corrosion, con‐taminated air or water supplies or chemical or electrical factors deemed abnormal orimpermissible in accordance with KaVo's instructions for use or other manufacturer'sinstructions. The warranty granted does not usually extend to lamps, light conductorsmade of glass and glass fibres, glassware, rubber parts, and the colourfastness ofplastic parts.All liability is excluded if defects or their consequences originate from manipulations orchanges to the product made by the customer or a third party that is not authorised byKaVo.Warranty claims will only be accepted if the product is submitted along with proof ofpurchase in the form of a copy of the invoice or note of delivery. The dealer, purchasedate, type, and serial number must be clearly evident from this document.16 / 18
1.002.0200 · kb · 20120206 - 02 - US · en
3.0 to 3.35 V DC (KaVo recommends 3.2 V DC) High-pressure lamp power max. 2.5 Watt All KaVo (LUX) handpieces featuring an original MULTIflex connector can be attach‐ ed. Note Please comply with the Instructions for Use of the product coupled to the MULTIflex (LUX) / MULTIflex LED coupli
Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original
The control panel of your Instant Pot Lux Mini/50/60/80 consists of a large LED display, cooking program keys, operations keys, / - keys to adjust time and a Keep Warm/Cancel key. Note that the Lux Mini does not have Cake and Multigrain programs. The Pressure Cook program on Lux Mini is the same as the Manual program on other Lux models.
App store for "LUX GEO" and create your LUX/GEOTM user account IF YOU DO NOT HAVE AN iOS OR ANDROID DEVICE, PLEASE VISIT LUX-GEO.COM. Step 2: Switch power off IMPORTANT: Turn off the power at circuit breaker to both your heating & cooling systems before performing any wiring. WATCH OUR VIDEO DEMO LUX-GEO.COM Step 3: Remove existing
10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan
service i Norge och Finland drivs inom ramen för ett enskilt företag (NRK. 1 och Yleisradio), fin ns det i Sverige tre: Ett för tv (Sveriges Television , SVT ), ett för radio (Sveriges Radio , SR ) och ett för utbildnings program (Sveriges Utbildningsradio, UR, vilket till följd av sin begränsade storlek inte återfinns bland de 25 största
Hotell För hotell anges de tre klasserna A/B, C och D. Det betyder att den "normala" standarden C är acceptabel men att motiven för en högre standard är starka. Ljudklass C motsvarar de tidigare normkraven för hotell, ljudklass A/B motsvarar kraven för moderna hotell med hög standard och ljudklass D kan användas vid
LÄS NOGGRANT FÖLJANDE VILLKOR FÖR APPLE DEVELOPER PROGRAM LICENCE . Apple Developer Program License Agreement Syfte Du vill använda Apple-mjukvara (enligt definitionen nedan) för att utveckla en eller flera Applikationer (enligt definitionen nedan) för Apple-märkta produkter. . Applikationer som utvecklas för iOS-produkter, Apple .
AMERICAN BOARD OF RADIOLOGY, ) ) CLASS ACTION ) Trial by Jury Demanded Defendant. ) CLASS ACTION COMPLAINT Plaintiff Sadhish K. Siva, (“Plaintiff”), for his Complaint against Defendant American Board of Radiology (“ABR” or “Defendant”) hereby alleges as follows: INTRODUCTION 1. This case is about ABR’s illegal and anti-competitive conduct in the market for initial board .
