Current Date 16Nov2018 750K CRAWLER DOZER
Page 1 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Current Date 16Nov2018750K CRAWLER DOZER750K Standard EquipmentENGINE:John Deere PowerTech PVS6.8L--meets FT4 / Stage IVemissions165 SAE Net hp (123 kw)Turbocharged with ChargedAir CoolerIsolation MountedNo power Derating up to10,000 ft AltitudeElectronic Fuel InjectionElectronic Control withAutomatic Engine ProtectionVertical Spin-on Engine OilFilterVertical Spin on Dual StageFuel FilterFuel/Water Sensor withPrimer PumpDual Safety Element DryType Air Cleaner, EvacuatorValveCOOLING SYSTEM:Cool-On-Demand VariableSpeed Engine FanAutomatic Reversing CoolingFan10-Fin/in. Engine CoolantRadiatorEngine Coolant -34 Degree F(-37 Degree C)Coolant Recovery Tank10-Fin/in. Hydrostatic Oil-toAir Cooler10-Fin/in. Air to Air ChargeAir Cooler10-Fin/in. Engine CoolantRadiator10-Fin/in. Hydraulic Oil-toAir Cooler6-Fin/in. Fuel Cooler(Fuel/Air)Enclosed Safety Fan Guard29.7 Gallon (112 Liter)Independent Hydraulic OilReservoirPOWER TRAIN:Dual Path HydrostaticTransmissionAutomatic Load Sensing forSpeed and PowerManagementAutoTracking SteeringControl30 Gallon (115 Liter)Hydrostatic Reservoir TankSingle Lever-Steering,Direction / Speed Controlwith Counter Rotationand HornCombined Decelerator/BrakePedalSelectable reverse speedratios 100%, 115%, or130% of forward groundspeed Electronic Control withAutomatic TransmissionProtectionDouble Reduction FinalDrives with Wet Multi-DiskBrakesIntegral Final Drive SealProtectionPrimary and SecondaryService Brakes (Conforms toISO 10265)Automatic Spring-Applied,Hydraulic Released ParkBrake - LeverOperated (Conforms to ISO10265)Transmission DiagnosticPortsSelectable Decelerator ModeUNDERCARRIAGE:Oscillating Undercarriage112 Volt Power PortElectronic Monitor Systemwith Audible and VisualWarning:Engine Coolant TemperatureTransmission OilTemperatureHydraulic Oil TemperatureTransmission PressureMachine Diagnostic ServiceCodeIndicator lightsLow Alternator VoltageEngine Air Filter RestrictionTransmission FilterRestrictionHydraulic Filter RestrictionWater in FuelFasten-Seat-BeltReturn-To-NeutralPark BrakeCalibration/Service ModeDecelerator Function ModeDigital Readout:TachometerAlternator VoltageHourmeterMachine Diagnostic ServiceCode(s)Transmission ChargePressureTransmission Direction andSpeedDiagnostic Service CodesMonitor SettingsCalibrationTransmission ControlSettingsMachine Travel HistoryGauges, Electric,Illuminated:Engine Coolant TemperatureEngine Oil PressureFuel LevelBid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 2 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPS(Conforms to SAE J1308 ISO 3457)*Tilt Out Heavy-DutyLouvered Front Grille andRadiator with HoseProtectionELECTRICAL:24 Volt System130 Amp Sealed Alternatorfor cab units100 Amp Sealed Alternatorfor canopy units(2) Grill Mounted, (2) RearMounted Halogen LightsPrewired for Optional RoofMounted LightsBypass Start Safety Coveron StarterElectrical Load Center withOperator Station Access:(2) Batteries with 190Minute Reserve Capacity,950 CCABlade-Type FusesElectrical Master DisconnectPositive Terminal BatteryCoversReverse Warning Alarm(Conforms to SAE J994,J1446, ISO 9355)HYDRAULICS:36 gpm (138 L/min) Loadsensing hydraulic systemwith variabledisplacement piston pump10 Micron Vertical Spin-onHydraulic FilterPilot Pressure ControlSystemTwo-function hydraulic-pilotT-bar joystick for OSDThree-function hydraulicpilot T-bar joystick with pushbutton anglefunction for PATHydraulic Diagnostic Ports74 in. (1880 mm) GaugeStandard Track Frame22 in. (559 mm) ClosedCenter Moderate Duty TrackShoesAdjustable Track SagSegmented SprocketsFront & Rear Chain Guideswith Bottom Wear SurfacesOPERATOR STATION:JDLink Ultimate MachineMonitoring System w/ 3-yearMessage ServiceModular Design IsolationMounted ROPS/FOPSOperator Station (Conformsto SAE J1040 - ISO 3471)Manual/Hydraulic OperatedOperator Station Tilt FeatureLeft and Right Front AccessFloormatInterior and exterior soundtreatmentSlip-Resistant Steps andErgonomically LocatedHandholds for Left,Right Access (Conforms toSAE J185 - ISO 2867)Air-suspension seatThigh SupportLumbarBackrest TiltHeight, Weight and Fore-AftSide Console Leg CushionsAdjustable ArmrestsAdjustable Foot Rests3 in. (76 mm) Seat Belt withRetractors (Conforms to SAEJ386 - ISO6683)Lunch Box StorageLockable Glove (Storage)BoxCupholdersBuilt-in Operator's ManualStorage Compartment andManualGrounds Equipment Bid #ESCNJ 18/19-25Electronic Engine Speed Dialwith Warm-Up IndicatorHorn, Electric (Conforms toSAE J994, J1446, ISO 9533)Coded Keyless Start withElectric Fuel Shut OffInterior Mounted RearviewMirror (Conforms to SAEJ985)OVERALL VEHICLE:Unitized Mainframe with:Integral Bottom ProtectionIntegral front tow loopsIntegral Machine TransportTie-DownsBolt-on Bottom AccessCoversFold-out grillPerforated Engine SideShieldsLeft & Right Side HingedEngine Access PanelHinged Mounted Hood withRadiator Access PanelTransmission Rear AccessCoverHand holds for MachineFuelingLockable Vandal Protectionfor:Engine Access PanelSide tank access doorsFuel tankInstrument PanelTransmission ReservoirHydraulic Reservoir97.5 Gallon (368 Liter) FuelTank:Shut Off Valve at TankOutletWater Drain on tankFast-Fuel Installation ReadyGround Level Storage in LeftRear Service CompartmentMaintenance Free CenterCrossbar PivotRequired - You must select one from each categoryBASE MACHINE2Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 3 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Ex-Works Dubuque, Iowa, United States of AmericaAs not all option codes have field kits, please review your order option codes and available kits prior to placing amachine order.DescriptionCodePrice750K CRAWLER DOZER8950T 270,332.00CodePrice0940 8,009.00ENGINEDescriptionJohn Deere PowerTech 6 Cyl EPA FT4/EU Stage IVCompliantPVS 6.8L (414 cu. in.)DOZER CONFIGURATIONDescriptionCodePricePower-Angle-Tilt (PAT)1020 10,226.001030 19,608.001040No Added CostCodePrice4510No Added Cost4610 3,872.004515 608.004615 4,494.00Dozer w/ 1880 mm (74 in.) Gauge Long Track (XLT) Frame (8 Roller)Includes inside mounted C-Frame with low mounted lift cylinders.Power-Angle-Tilt (PAT)Dozer w/ 2134 mm (84 in.) Gauge Low Ground Pressure (LGP) Frame (8Roller)LGP Comes with 155 SAE Net hp (116 kw).Includes inside mounted C-Frame with low mounted lift cylinders.Outside Dozer w/ 1880 mm (74 in.) Gauge Standard TrackFrame (7 Roller)Includes outside mounted push beams with high mounted lift cylinders.Lift Cylinders with Hoses Routed behind Cylinder Profile (Outside Dozer).TRACK SHOES AND CHAINDescriptionStandard Outside Dozer Tracks Only40 Linkwith 22 in. (559 mm) Moderate Service Shoes40 Link with Extended Life Bushings22 in. (559 mm) Moderate Service Shoes40 Link Moderate Service Shoeswith 24 in. (610 mm) Moderate Service Shoes40 Link with Extended Life Bushings24 in. (610 mm) Moderate Service Shoes3Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 4 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPS40 LinkGrounds Equipment Bid #ESCNJ 18/19-254525 695.004625 4,584.004530 1,013.004630 4,902.004535 1,193.004635 5,665.004540 1,558.004640 6,015.004545 2,239.004645 6,731.004550 2,746.004650 7,221.004555 1,609.00with 22 in. (559 mm) Extreme Service Shoes40 Link with Extended Life Bushings22 in.(559 mm) Extreme Service Shoes40 Link Extreme Service Shoeswith 24 in. (610 mm) Extreme Service Shoes40 Link Extreme Service Shoeswith Extended Life Bushings and 24 in. (610 mm) Extreme Service ShoesExtra Long Track or Low Ground Pressure TrackSealed and Lubed Track Chain W/ Moderate Service Shoes. Full Widthand Closed Center Grousers except as noted. Recommend ModerateService Shoes for Grading Applications.45 Link Moderate Service Shoeswith 22 in.(559 mm) Moderate Service Shoes45 Link with Extended Life Bushings22 in. (559 mm) Moderate Service Shoes45 Link Moderate Service Shoeswith 24 in. (610 mm) Moderate Service Shoes45 Link with Extended Life Bushings24 in. (610 mm) Moderate Service Shoes45 Link Moderate Service ShoesRequires code 1030.with 28 in. (711 mm) Moderate Service Shoes45 Link with Extended Life BushingsRequires code 1030.28 in.(711 mm) Moderate Service Shoes45 Link Service ShoesRequires code 1030.with 34 in. (864 mm) Moderate Service Shoes With Clipped Corners45 Link with Extended Life Bushings34 in.(864 mm) Moderate Service Shoes With Clipped CornersRequires code 1030.45 Link Extreme Service Shoeswith 22 in. (559 mm) Extreme Service Shoes4Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 5 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPS45 Link with Extended Life BushingsGrounds Equipment Bid #ESCNJ 18/19-254655 5,987.004560 2,227.004660 6,699.0022 in. (559 mm) Extreme Service Shoes45 Link Extreme Service Shoeswith 24 in. (610 mm) Extreme Service Shoes45 Link with Extended Life Bushings24 in. (610 mm) Extreme Service ShoesDOZER BLADEAll Blades include Straight End Bits and Bolt-On Cutting Edges.Blades are not installed, but shipped with Crawler Dozer.When equipping with sideboom, a front attachment should not be installed on the tractor. Contact DMAC for LessBlade, C-Frame, and Lift Cylinder custom codes.DescriptionCodePriceBlade7075 4,730.007085 6,082.007080 6,697.00130 in. (3302 mm) wide (XLT) Extra Long Track Power-Angle-Tilt (PAT)BladeRequires Code 1010 or 1020Blade128 in. (3251 mm) Standard Track Semi-U BladeLow Ground Pressure Blade156 in. (3962 mm) Low Ground Pressure (LGP) Power-Angle-Tilt (PAT)BladeRequires Code 1030HYDRAULICS FOR DOZER BLADE AND ATTACHMENTSDescription2 Function Hydraulics for Outside Dozer w/ Quick DropValveCodePrice7725No Added Cost7750 4,119.007760 5,591.00Requires Code 1040 or 10503 Function Electro-Hydraulics (EH) for Power-Angle-Tilt(PAT)Grade Control Ready (EH) Hydraulics.Not For Use With Code 7975.Grade Control Recommendations:Topcon Ready Installation - Sales code 2500.Trimble ready installation AT448665.Leica ready installation AT408433.4 Function Electro-Hydraulics (EH) for Power-Angle-Tilt(PAT) and Rear AttachmentGrade Control Ready (EH) Hydraulics. Includes rear Auxiliary plumbing forripper. Grade Control Recommendations: Topcon Ready Installation -5Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 6 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Salescode 2500. Trimble Ready Installation AT448665. Leica ReadyInstallation AT438522.3 Function Hydraulic Controls for Outside Dozer w/ QuickDrop Valve7735 2,863.007745 2,359.007755 3,887.007720 1,263.007730 4,234.00DescriptionCodePriceStandard Hydraulic Pump7925No Added Cost7975 3,274.007985 3,356.00DescriptionCodePriceHydraulic And Hydrostatic Oil - Hydrau8010No Added Cost8020 565.00Requires Code 1040 or 1050.Includes rear Auxiliary plumbing for ripper.3 Function Hydraulic Controls for Power-Angle-Tilt (PAT)Requires Code 1010 or 1020 or 1030.4 Function Hydraulic Controls for Power-Angle-Tilt (PAT)Requires Code 1010 or 1020 or 1030.Includes rear Auxiliary plumbing for ripper.2 Function Electro-Hydraulic (EH) Controls for OutsideDozer w/ Quick Drop ValveRequires Code 1040.3 Function Electro-Hydraulic (EH) Controls for OutsideDozer w/ Quick Drop ValveRequires Code 1040.HYDRAULIC PUMPDoes not Includes external spline for mechanical drive winch or auxiliarypump.Hi-Flow Hydraulic Pump for use with Hydraulic WinchContains winch control lever and plumbing to rear of crawler for hydraulicwinch use.Can not be used with code 9510 Storage CompartmentThru-drive Hydraulic Pump for use with Direct Drive (PTO)WinchGREASES, FUEL, OIL, & COOLANTStandard Factory Fill.Provides All-Season Capability in Ambient Temperatures Ranging From-25C (-13F) to 50C (122F).Hydraulic And Hydrostatic Oil - Hydrau XROptional Factory Fill.Intended for Colder Climates with Extreme Cold Ambient Temperaturesdown to -40C (-40F)6Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 7 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Provides All-Season Capability in Ambient Temperature Ranging from-40C to 40C (-40F to 104F).CANOPY OR CABDescriptionCanopyCode5025PriceNo Added Cost5085 30,228.00CodePrice5885No Added Cost5855No Added Cost5890 647.00Includes floormat.Cab with Roof Mounted Air Conditioner/HeaterIncludes:130 Amp AlternatorLeft and Right quarter hinged windowsTinted safety glassDome lightHeater, roof-mounted24,000 BTU air conditionerFloormat(4) Windshield wiper/washers for windshield, rear window and doorsAM/FM, weather-band radioRadio-area storage slot with second power portSEATDescriptionAir Suspension Comfort Control High Back Fabric Seat3 in. (76 mm) retractable seat belt.Adjustable armrests, backrest tilt, thigh support, lumbar, height, weightand fore-aft positioningRequires Cab.Air Suspension Comfort Control High Back Vinyl Seat3 in. (76 mm) retractable seat belt. Adjustable armrests, backrest tilt, thighsupport, lumbar, height, weight and fore-aft positioning. Requires Code5025.Heated Air Suspension Comfort Control High Back FabricSeat3 In. (76 mm) retractable seat belt.Adjustable armrests, backrest tilt, thigh support, lumbar, height, weightand fore-aft positioning.Restricted to cab use only.MACHINE CONNECTIVITYMachine connectivity functions require cellular coverage. Usage of JDLink System requires customer's acceptance ofthe terms of the John Deere Telematics System Contract.Option availability limited by specific geographical regions. Please refer to region specific price pages for appropriateordering codes.DescriptionCodePriceNo JDLink/ZXLink Ultimate1741( 1,232.00)170CNo Added Cost7Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 8 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25JDLink Ultimate Cellular - 5 YearsIncludes JDLink hardware: integrated cab wiring harness, antenna, 4GLTE modular telematics gateway (MTG), Wi-Fi data transfer, Blue Toothcapability and JDLink Ultimate activation.JDLink utilizes cellular and satellite technology infrastructure that isoutside the control of John Deere. Changes to that infrastructure mayrequire customers to purchase compatible JDLink hardware to restorefunctionality.Includes 5 year subscription. Annual subscription renewal required after 5years for continued functionality. JDLink customer account must becreated to access JDLink Ultimate data. Go to www.StellarSupport.com torenew or update JDLink subscriptions.Use of this service, and all rights and obligations of John Deere and theCustomer (as identified in the applicable agreement), are governed by theterms and conditions outlined in the applicable Services and Softwareagreements available at www.JohnDeere.com/Agreements. If these termsand conditions are not agreeable do not proceed and do not use theservice.JDLink Ultimate Satellite - 5 Years170J 1,936.00DescriptionCodePriceTopcon Grade Control Base Kit Installed2500 7,497.012575No Added Cost2501 7,497.01The JDLink satellite option includes a separate satellite gateway toconnect to the global satellite network. The satellite gateway works withthe 4G LTE MTG to automatically transmit data over a satellite networkwhen a cellular network is not available. Includes JDLink hardware:integrated cab wiring harness, antenna, 4G LTE modular telematicsgateway (MTG), Wi-Fi data transfer, Blue Tooth capability, separatesatellite gateway and JDLink Ultimate dual mode activation. JDLinkutilizes cellular and satellite technology infrastructure that is outside thecontrol of John Deere. Changes to that infrastructure may requirecustomers to purchase compatible JDLink hardware to restorefunctionality. Includes 5 year subscription. Annual subscription renewalrequired after 5 years for continued functionality. JDLink customer accountmust be created to access JDLink Ultimate data. Go towww.StellarSupport.com to renew or update JDLink subscriptions. Use ofthis service, and all rights and obligations of John Deere and theCustomer (as identified in the applicable agreement), are governed by theterms and conditions outlined in the applicable Services and Softwareagreements available at www.JohnDeere.com/Agreements. If these termsand conditions are not agreeable do not proceed and do not use theservice.GRADE CONTROLRequires code 7750 or 7760.Factory installed and includes additional brackets and wiring harnessesthat further enhances and simplifies the addition of a Topcon grade controlsystem. This also enables the Topcon 3D-MC2 Grade Control Systems tobe ordered.No Topcon Grade Control Base Kit InstalledOrder for no blade control or Trimble or Leica Blade control fieldinstallations.Requires No Topcon Radio Installation code 27758Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 9 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25SmartGrade Control Base KitOnly available with code 1020 XLT or 1030 PAT LGP Track Frameconfiguration. Requires code 7750 or 7760. Includes the brackets andwiring harnesses required to enable the SmartGrade options 2801 or2802.TOPCON GRADE CONTROL SYSTEMKit includes the following equivalent parts from Topcon 3DMC2 system:Password, MC-R3 Full AutoOAF Bundle, MC-R3 3DMC2Kit, GX-60 GPSKit, Common 3D Dozer GPSOEM, Antenna Config KitKit, OEM MC2 SensorAssy, MC-R3 NO-OAFFull Assembly and Final Calibration On SiteDescriptionCodePriceNo Topcon Radio Installation2775No Added CostSmartGrade with UHF Radio2801 113,000.002802 113,000.00DescriptionCodePriceEnglish Operator Manual2605No Added CostSpanish Operator Manual2610No Added CostFrench Operator Manual2615No Added CostRequires code 2501.Mastless grade control system fully integrated into the John Deere caband crawler dozer structure. Consists of UHF transmitter/receiver,sensors, and in-cab display for configuring, monitoring, and measuringgrade. Includes Topcon 3D-MC² software compatible with Topcon fileformats. Includes feature that automatically raises the blade before trackslippage occurs. Also included is a calibration wizard that decreases setup time.SmartGrade with 915 MHZ RadioRequires code 2501.Mastless grade control system fully integrated into the John Deere caband crawler dozer structure. Consists of 915SS transmitter/receiver,sensors, and in-cab display for configuring, monitoring, and measuringgrade. Includes Topcon 3D-MC² software compatible with Topcon fileformats. Includes feature that automatically raises the blade before trackslippage occurs. Also included is a calibration wizard that decreases setup time.OPERATOR'S MANUAL AND DECALSOptional - Select as desiredFUEL FILTRATIONDescriptionSevere-Duty Fuel FilterCode90609Price 521.00Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 10 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25EXHAUSTDescriptionChrome ExhaustCode9065Price 136.00Code9070Price 329.009075 508.00DescriptionCodePriceCoolant Heater, Electric9530 141.00Code9085Price 2,153.00Code9035Price 5,557.00MISCELLANEOUSDescriptionFluid Sampling PortsFluid Sampling Ports for Engine Oil, Engine Coolant, Hydraulic andTransmission OilsQuick Service Bank for Transmission, Hydraulic, Engine oil &Engine Coolant Fluid changesRemote Service Bank is inside engine compartment and includes IndustryStandard Quick Disconnect Couplers.COOLANT HEATERFAST FILL FUEL SYSTEMDescriptionFast-Fuel SystemFast-fuel Shaw system compatible with Wiggins componentsHYDRAULIC CONTROLSDescriptionPower Pitch with Programmable Return to Pitch SettingsRequires codes 7720 or 7730.SEATDescriptionCodePriceUnder- Seat Canopy Heater9125 1,275.00Code9501Price 1,095.00Code9365Price 130.00Requires Canopy30,000 BTURADIODescriptionPremium Radio with BluetoothMIRRORSDescriptionExternal Mounted Rear Attachments Mirror10Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 11 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Requires Code 5085CANOPY OR CABDescriptionCodePriceCab Mounts and Isolators for Forestry Application9128 2,307.00CodePrice9909 148.00Code9325Price 1,248.00DescriptionCodePriceDeluxe LED Work Lights9168 603.00Code9370Price 220.00DescriptionCodePriceThreaded Pitch Jack9055 1,062.00DescriptionCodePriceDirect Drive Winch Ready9458 2,264.009456 2,264.00Code9187Price 22,656.00Requires Code 5085.SHIPPING PREPARATIONDescriptionNon-Export Rust Preventive CoatingCoating protects exposed unpainted surfaces from road salt duringshipment.GRILLEDescriptionHeavy Duty GrilleWORK LIGHTSOptional Lights12 VOLT POWERDescription2nd - 12 Volt Power PortNot for use with codes 7750 or 7975.MISCELLANEOUSWINCHRequires code 7985.Hydraulic Winch ReadyRequires code 7975. Includes Rear Cab or Canopy screen.RIPPERDescription11Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 12 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Heavy Duty Parallelogram Ripper with 3 Shank Pockets and(3) Shank/TeethRequires Code 7735, 7755 or 7760.Not For Use With Codes 9250, 9340, 9345 or 9347.HITCHESDescriptionRetrieval HitchCodePrice9340 3,097.009343 1,366.00Code9345Price 3,986.009250 1,760.009347 1,435.00DescriptionCodePriceFull Length Rock Guards for Standard Track9150 3,525.009160 2,015.009155 4,531.00Retrieval Hitch with 375 kg. (827 lb.)Not for use with Code 9250, 9343, 9345, or 9347.Retrieval Hitch for use w/o Rear CounterweightNot for use with codes 9340, 9345 or 9347.COUNTERWEIGHTDescriptionExtended Rigid Drawbarwith 434 kg. (957 lb.) Rear CounterweightRecommended for pull-type implements which require turning clearance extends 19.5 in. (495 mm) to rear.May limit angle of departure in depressions.Cannot use with rippers, winch, three-point hitch or other rear attachments.Not For Use With Code 9340, 9343, or 9347.Rear Counterweight720 lb.(326kg)Extended Rigid Drawbar with Pin for use w/o RearCounterweightRecommended for pull-type implements which require turning clearance extends 19.5 in. (495 mm) to rear.May limit angle of departure in depressions.Cannot use with rippers, winch, three-point hitch or other rear attachments.Not for use with codes 9340,9343 or 9345.GUARDSRequires Code 1040 or 1050.Recommended for applications in rock over 3 in. (76 mm) or sideslopesgreater than 2:1.Not Recommended for waste or other material packing applicationsBolt-On Final Drive Trash GuardsSeal guards are for Dry conditions, like Trash applications or Demolition andNOT for Water/Muddy conditions.12Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 13 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Full Length Rock Guardsfor Extra Long Track (XLT)Requires Code 1020, 1025, 1030 or 1060Recommended for applications in rock over 3 in. (76 mm) or sideslopesgreater than 2:1.Not Recommended for waste or other material packing applications.Large Debris Prescreen9132 725.00CodePrice9510 650.00Intended for high debris environments such as landfill and woodchipapplications.MISCELLANEOUSDescriptionRear Storage CompartmentCan not be use with codes 7750/7760 IGC and 7975 Hyd. pump.Storage compartment can not be used with tank protection for eitherforestry or waste handler configured crawlers.ATTACHMENTS FOR FIELD CONVERSIONF.O.B. Dubuque, Iowa for dealer-installed kits, except where noted. Some of the following kits may require additionalparts for a complete installation. Prior to ordering, check the installation instructions by going towww.johndeeretechinfo.com and clicking on Library, or by clicking on this Hyperlink ( Installation Bulletin Search ), andinsert the AT number to retrieve the attachment installation instruction bulletin for additional parts.Exception to above note is FRONTIER Dealer Installed Kits.All attachments are sold as a quantity of one.DescriptionCodePriceBladesCrawler Blade Reinforcement Kit for 156 in. (3962 mm)Low Ground Pressure (LGP) Power-Angle-Tilt (PAT) BladeAT347101 1,616.00AT422365 95.00AT437378 22,714.00AT438522 8,361.00Cold Start110 Volt Engine Coolant Heater, (1000 Watt)Average installation, 0.5 hour.Frame AttachmentParallelogram Hydraulic RipperRear-mounted parallelogram hydraulic (3) Pocket Ripper - FOB Trussville,Alabama.Includes (3) Shanks with TeethRequires tractor to be built with code 7735, 7755 or 7760 Aux. plumbing.If not, Rear Hydraulics Field Kit and Auxiliary Valve Section Field Kit Mustbe ordered.Grade ControlLeica Grade Control Interface Package, Paladin-Installedfor Cab or Canopy13Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 14 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25Requires code 7750 or 7760.SmartGrade Radio Board Swap Kit (UHF to 915 MHZ)BYT10390 2,150.00AT481022 330.00AT448666 6,892.00AT448665 6,892.00Chip Protection Side Shield Kit (FT4)AT452728 5,603.00Chip Screen Kit (iT4)AT450275 5,603.00Final Drive Seal Trash GuardsAT357218 1,671.00AT458884 1,463.00AT459203 233.00AT331637 1,784.00Electro-Hydraulics (EH) Auxiliary Section and Control (FT4) AT433367 1,921.00Hydraulic Valve Auxiliary SectionAT227454 2,695.00AT425441 1,478.00Kit includes 915 SS Radio Board, 915 SS Antenna, Label, and Instructionsto remove UHF radio board and install 915 SS radio board.SmartGrade Radio Board Swap Programming Cable5ft data transfer cable for programming.Trimble Grade Control Interface Package, JRB-InstalledRequires code 2575 and 1040.Trimble Grade Control Interface Package, JRB-InstalledRequires code 2575 and 1020 or 1030.GuardsAverage installation, 2 hours.Seal guards are for dry conditions, like trash applications or demolition andNOT for wet/muddy conditions.For use with serial numbers starting as follows:850J WT & WLT Build Codes 1025 and 1050 SNT0850JR175722850J LT Build Codes 1020 and 1040 SNT0850JN177273850J LGP Build Codes 1030 and 1060 SNT0850JX180890750J LT Build Codes 1010, 1020, 1040 SNT0750JX185664750J LGP Build Codes 1030 and 1050 SNT0750JX181539PAT Cylinder Rod BootsRequires code 1020, 1025 or 1030.SpillsheetHydraulicsElectro-Hydraulics (EH) Auxiliary Hydraulic FunctionThis kit will convert code 7750(IGC) Hydraulics 3 Function for (PAT) to(IGC) Hydraulics 4 Function for (PAT) and Rear Attachment.Not for FT4 use.Not for use with FT4.Hydraulic Valve Auxiliary Section (FT4)For use with Pilot Controls.14Bid Term: 2/20/19 - deere.u90947.eproducts.view.servlets.Equipm. 11/16/2018
Page 15 of 19John Deere 750K Crawler Dozer 11-16-18The Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSHydraulics for Rear Auxiliary Plumbing (FT4)Grounds Equipment Bid #ESCNJ 18/19-25AT433358 105.00Hydraulics for Ripper PlumbingBYT10483 105.00Power Pitch with Programmable Return to Pitch SettingsAT433773 4,600.00Rear Auxiliary PlumbingAT377238 462.00AT422516 3,956.00BYT10389 2,150.00BYT10774 321.00Additional Front LightsAT368356 80.00LED Grille Light Field KitBYT10783 334.00AT325625 3,617.00AT433388 2,228.00Large Debris PrescreenAT444868 777.00Severe Duty Fuel Filter kitAT435425 421.00Quick Service Bank for Transmission, Hydraulic, Engine oil AT425679& Engine Coolant Fluid changes (FT4) 640.00Required for winch installation and without factory code 7975. RequiresCode 7725, 7735, 7745, or 7755. Also requires a Rear Fender fromService AT320148 for STD OSD or AT320149 for PATLT or PATLGP forservice parts.Not for use with FT4.Winch PlumbingMiscellaneousSmartGrade Radio Board Swap Kit (915 MHZ to UHF)Kit includes UHF Radio Board, UHF Antenna, Label, and Instructions toremove 915 SS radio board and install UHF radio board.Operator EnvironmentLED Cab Light Field KitOverall VehiclePowertrain5kW Diesel Fuel Fired Engine Coolant Heater KitIncludes igniter, timer and coolant circulation pump.Recommended for temperatures below -13 F (-25 C).Average installation, 6 hours.Fast Fuel KitProvides ground level fast fueling using a connect
Manual/Hydraulic Operated Operator Station Tilt Feature Left and Right Front Access . 24 in. (610 mm) Extreme Service Shoes 4660 6,699.00 DOZER BLADE All Blades include Straight End Bits and Bolt-On Cutting Edges. . John Deere 750K Crawler Dozer 11-16-18 .
750K CRAWLER DOZER 8950T 275,063.00 ENGINE Description Code Price John Deere PowerTech 6 Cyl EPA FT4/EU Stage IV Compliant PVS 6.8L (414 cu. in.) 0940 8,149.00
Ɵnal drives are mounted independent of the track frames, where they’re effectively protected from shock loads. Engine pre-cleaner with aspiration lines (standard on 750K and 850K) provides higher Ɵlter efƟciency for longer engine Ɵlter service life.
John Deere 850K Crawler Dozer 11-16-18 The Educational Services Commission of New Jersey NJ State Approved Co-op #65MCESCCPS Grounds Equipment Bid #ESCNJ 18/19-25 4 Bid Term: 2/20/19 - 2/19/21. 30 in. (760 mm) Moderate Servi
Application: Excavators Product Definition Image Crawler Excavators A Crawler Excavator is a self-propelled crawler mounted on heavy equipment that is designed to dig or move large objects and is classified by its mode of locomotion. The main function of a Crawler Excavator is to dig holes or trenches for construction related activities.
hydraulic jack force on the track-adjusting bearing block. Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width.
DOOSAN Daewoo 340 LCV crawler excavator from Croatia for sale Crawler excavator DOOSAN Daewoo 340 LCV. Ask for all available pictures. Online: 7mo. Crawler excavator Doosan DX 340 LC--5 (narrow track), 2016. Daewoo-Doosan DX140 LCR BLADE - TILT BUCKET - SMALL BUCKET.
Excavator, Crawler, Hydraulic 100 - 150 HP; hour 104.25 Excavator, Crawler, Hydraulic; more than 150 HP hour 145.79 Fork Lift 6000 Lbs or less; hour 11.97 Fork Lift; more than 6000 Lbs hour 28.33 Loader, Crawler less than 80 HP; hour 68.66 Loader, Crawler; 80 HP and more hour .
In Abrasive Jet Machining (AJM), abrasive particles are made to impinge on the work material at a high velocity. The jet of abrasive particles is carried by carrier gas or air. The high velocity stream of abrasive is generated by converting the pressure energy of the carrier gas or air to its kinetic energy and hence high velocity jet. The nozzle directs the abrasive jet in a controlled manner .
