250 Series Sliding Window - Pella
250 Series Sliding WindowProduct Selection GuideSize and Performance Data. V250-SW-2Sound Transmission Class. V250-SW-2Features and Options. V250-SW-3Glazing Performance3/4" Dual-Pane Glazing. V250-SW-41" Triple-Pane Glazing. V250-SW-5Grille Types. V250-SW-6Size Tables. V250-SW-7Special Sizes and Dimensions. V250-SW-10Design Data. V250-SW-11Detailed Product Description. V250-SW-13Unit SectionsOptional Foam Insulation. V250-SW-14Frame Types. V250-SW-15Nail Fin Two-Panel (OX / XO). V250-SW-16Nail Fin Three-Panel (OXO). V250-SW-17Block Frame Two-Panel (OX / XO). V250-SW-18Document Navigation Tips:Items listed in the table of contents above are active links that will take you to the corresponding page.The Pella logo on each page is a link back to this table of contents.Bookmarks are also included in this PDF document and are available as an additional navigation option.Supporting documents for this product:Test ertificationReports/Test Reports Vinyl-250.pdfCSI Specs (readable using Microsoft Word or other text editing adm/Vinyl250-CSI Specs/08 53 13 SW-250.rtfDetailed Product Description (readable using Microsoft Word or other text editing adm/Vinyl250/V 250SW DPD.rtfSize Tables (requires appropriate CAD software to read and l250/V250-SW-Elev D.dwgCAD cross sections (requires appropriate CAD software to read and l250/V250-Sliding%20Wdw-Details D.dwg3D & BIM (requires appropriate software to read and hup (requires appropriate software to read and l250/PellaSKP 250Series Sliding Window.zipCombination al/adm/Vinyl250/V250 Combo.pdfInstallation inyl250/V250-InstallDetails.pdfThe information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications aresubject to change without notice. Consult your local Pella representative for up-to-date product information.Microsoft and Microsoft Word are registered trademarks of Microsoft Corp.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-1
250 Series Sliding WindowPerformance Data250 Series Sliding WindowSizesStandard SizesSSpecial Sizes Available Built on 1/8" IncrementsOFramesNail Fin OnlyONail Fin with J-ChannelO3-1/4" Block/ ReplacementSIntegral 5/8" FlangeODouble-Wall Flush Flange (West Region Only)OPerformance 1St a n dard Perfo rman c eR-PG25 — R-PG35Meets or Exceeds AAMA/WDMA RatingsHallmark CertifiedAir Infiltration0.13(cfm / ft2 of frame @ 1.57 psf wind pressure.) 2Design Pressure25 — 35 psfWater Penetration Resistance3.76 — 5.43 psfPe rf ormance Upgrad eR-PG50Meets or Exceeds AAMA/WDMA RatingsHallmark CertifiedAir Infiltration0.13(cfm / ft2 of frame @ 1.57 psf wind pressure.) 2Design Pressure50 psfWater Penetration Resistance7.52 psfOt h e r Perfo rmance Crit eriaForced Entry Resistance (Minimum Security Grade) 310Operating Force (lb) Initiate Motion / Maintain Motion(of Hallmark tested size and glazing) 435Sound Transmission Class and Outdoor-Indoor Transmission ClassGlazing SystemFrame SizeTested 5Overall GlazingThicknessExteriorGlass Glass ThicknessThirdPane Thickness2.2mm3mmSliding Window – Dual-Pane Insulating Glass60" x 48"11/16"2.2mmSliding Window – Triple-Pane Insulating Glass60" x 48"1"3mmS Standard; O Optional, (—) Not available(1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values. Performance with additional options may notbe the same as Standard and Special size units. Please contact your local Pella representative for complete information.(2) Published performance data for air infiltration is determined by testing a minimum of four (4) products of NFRC model size. Testing is conducted in accordance with ASTM E283. Air infiltrationratings for products will differ by size. The performance data does not apply to combination assemblies unless noted. Actual product performance may vary for a number of reasons includinginstallation and product care.(3) The higher the level, the greater the product's ability to resist forced entry.(4) Glazing configurations may result in higher operational forces.(5) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. The presence of low-e or argon have negligibleeffect on sound attenuation characteristics.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-2
250 Series Sliding WindowFeatures and Options250 SeriesSliding WindowGlazing (Insulating Glass)250 SeriesSliding WindowHardwareG l a zi ng TypeSColor matched hardwareDual-pane insulating glassSTriple-pane insulating glassOIn s u l ated Glass Op t io ns / Lo w - E Typ esS a sh l o c ksStandard Cam LockSAutolockOAdvanced Low-ESNaturalSun Low-EOConventional black fiberglass screens - flatSSunDefense Low-E 1OHidden ScreenOBronze-tinted Advanced Low-E 1OA ddi tional Glaz ing O p t io nsScreensGrillesGr i l l e s- B e tw e e n - the - Gl a ss3Annealed glassS3/4" ContourOTempered glassO5/8" flatOObscure glass 2OGrille Patterns: Traditional, Prairie, Top Row,Custom - Equally DividedOG a s Fill / High Altitud eArgonSHigh altitudeOHigh altitude with argon 1OSashFoam InsulationOPerformance UpgradeOInterior / exterior colorWhite Interior/White ExteriorSAlmond Interior/Almond ExteriorOFossil Interior/Fossil ExteriorOWhite Interior/Brown ExteriorOWhite Interior/Black ExteriorOS Standard; O Optional(1) Not available with triple-pane glazing.(2) Contact your local Pella sales representative for current offering.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-3
250 Series Sliding WindowGlazing Performance - Total UnitShaded Areas MeetENERGY STAR PerformanceCriteria in Zones ShownPerformanceValues 1VLTCRU. S.SHGCGapFillU-FactorNFRC CertifiedProduct 5585854545858555559590.310.31Argon 0.270.27Air0.310.31Argon 0.280.28Air0.300.30Argon 0.455555585854545858555559593Argon 0.280.280.290.260.410.3658583Argon 0.270.270.290.260.410.365858Int.Type of ZoneVent — Dual-Pane3/4"3/4"3/4"3/4"3/4"3/4"N NC SCAdvanced Low-E IGwith grilles-between-the-glassAdvanced Low-E IGwith grilles-between-the-glassNaturalSun Low-E IGwith grilles-between-the-glassNaturalSun Low-E IGwith grilles-between-the-glassSunDefense Low-E IGwith grilles-between-the-glassSunDefense Low-E IGwith grilles-between-the-glassAir0.310.31Argon 0.280.28Air0.320.32Argon 0.290.29Air0.310.31Argon 0.270.27Canada 2ERSZoneCANCNCNNNNNC SCNC SCNNNCNCSSSSVent — with Foam Insulation3/4"3/4"3/4"3/4"3/4"3/4"Advanced Low-E IGwith grilles-between-the-glassAdvanced Low-E IGwith grilles-between-the-glassNaturalSun Low-E IGwith grilles-between-the-glassNaturalSun Low-E IGwith grilles-between-the-glassSunDefense Low-E IGwith grilles-between-the-glassSunDefense Low-E IGwith SSTinted Glazing3/4"Bronze Advanced Low-E IGwith grilles-between-the-glassNCNCTinted Glazing — with Foam Insulation3/4"Bronze Advanced Low-E IGwith grilles-between-the-glassNNNCNCR-Value 1/U-FactorSHGC Solar Heat Gain CoefficientVLT % Visible Light TransmissionCR Condensation ResistanceER Canadian Energy RatingCA(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500.ENERGY STAR values are updated to 2016 (Version 6) criteria.(2) The values shown are based on Canada's updated ENERGY STAR 2020 initiative.Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-4
250 Series Sliding 10-00060-00001PEL-N-210-00064-00001333333333333N NC oneVent — Triple-Pane1"1"1"1"Advanced Low-E Triple-pane IGwith Grilles-between-the-glassAdvanced Low-E Triple-pane IGwith Grilles-between-the-glassNaturalSun Low-E Triple-pane IGwith Grilles-between-the-glassNaturalSun Low-E Triple-pane IGwith Grilles-between-the-glassAir0.250.25Argon 0.210.22Air0.250.26Argon 0.220.22Canada 2CR3U. 01PEL-N-210-00049-00001GapFillSHGCInt.NFRC CertifiedProduct #MiddleType of GlazingShaded Areas MeetENERGY STAR PerformanceCriteria in Zones ShownPerformanceValues 1U-FactorGlass(mm)Ext.GlazingThicknessGlazing Performance - Total CANCNCVent — with Foam Insulation1"1"1"1"Advanced Low-E Triple-pane IGwith Grilles-between-the-glassAdvanced Low-E Triple-pane IGwith Grilles-between-the-glassNaturalSun Low-E Triple-pane IGwith Grilles-between-the-glassNaturalSun Low-E Triple-pane IGwith Grilles-between-the-glassAir0.240.24Argon 0.200.21Air0.240.25Argon 0.210.21SCSCSCSCSSSSNCNCR-Value 1/U-FactorSHGC Solar Heat Gain CoefficientVLT % Visible Light TransmissionCR Condensation ResistanceER Canadian Energy RatingCA(1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500.ENERGY STAR values are updated to 2016 (Version 6) criteria.(2) The values shown are based on Canada's updated ENERGY STAR 2020 initiative.Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-5
250 Series Sliding WindowGrillesGrille ProfilesGrilles-Between-the-Glass5/8"3/4"5/8" Flat3/4"3/4" Contour3/4" ContourGrille PatternsPrairie Lite PatternsPrairie- Approximately 4" from edge of sash to center of bar.- Minimum actual glass is 13".6-Lite PrairiePrairie6-Lite9-Lite Prairie9-LitePrairieOther Available PatternsTraditional- Specify number of lites.- Grille Bars (Grilles) must be equally divided on visible glass.- Minimum lite size 6".TraditionalTraditionalRowTopTopRowTop Row- Top Row dimension must be 1/2 actual glass.CustomCustom— Equally-DividedEqually DividedFor traditional patterns, see size tables.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-6
250 Series Sliding WindowSize TablesVent-Fixed Units (XO)(610)(597)Opening6' 0"1/ 2 "6' 6"71 1/ 2"776-6/2-01/ 2 /5-0E16-6/2-6E1/ 2 "291/ 2 "231/ 2 "59352' 0"5' 0"1/ 2 "E16-0/3-0E6-6/3-0E41 1/ 2"2' 6"4' 6"531/ 2 "E15-0/3-6E6-0/3-6E6-6/3-6E1/ 2 "3' 0"4' 0"47(1 981)(1 969)473' 6"1/ 2 "(1 829)(1 816)E5-0/4-0E6-0/4-0E6-6/4-0E1/ 2 "4' 0"3' 0"35(1 524)(1 511)534' 6"1/ 2 "(1 372)(1 359)E5-0/4-6E6-0/4-6E6-6/4-6E1/ 2 "5' 0"2' 0"23(1 219)(1 207)59(1 524)(1 511)(1 372)(1 359)(1 219)(1 207)(1 067)(1 5-0/5-0E6-0/5-0E6-6/5-0EEgress Notes:Check all applicable local codes for emergency egress requirements.E Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 .E1 Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 .See Design Data pages in this section for clear opening dimensions.Not to scale.XO units shown also available as OXPella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-7
250 Series Sliding WindowSize Tables - One-Third VentVent-Fixed-Vent Units (XOX)(1 829)(1 3-07-0/3-08-0/3-01/ 2 "231/ 2 "292' 0"6-0/2-08-0/3-6E471/ 2 -0E1/ 2 "4' 0"7-0/3-6534' 6"EE8-0/4-6E1/ 2 "5' 0"1/ 2 "59(1 219)(1 207)(1 372)(1 359)951/ 2 "1/ 2 "2' 6"836-0/3-6(1 524)(1 511)8' 0"7' 0"71 1/ 2"353' 0"3' 6"6' 0"(2 438)(2 426)41 1/ 2"(1 067)(1 054)(914)(902)(762)(749)(610)(597)Frame(2 134)(2 121)E8-0/5-0EEgress Notes:Check all applicable local codes for emergency egress requirements.E Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 .E1 Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 .See Design Data pages in this section for clear opening dimensions.Not to scale.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-8
250 Series Sliding WindowSize Tables - One-Quarter VentVent-Fixed-Vent Units (XOX)(1 829)(1 -67-0/4-68-0/4-66-0/5-07-0/5-08-0/5-01/ 2 "231/ 2 "291/ 2 "352' 0"8-0/2-041 1/ 2"2' 6"7-0/2-01/ 2 "E11/ 2 "3' 0"95473' 6"6-0/2-01/ 2 "E1/ 2 "4' 0"8' 0"83534' 6"7' 0"71 1/ 2"E1/ 2 "5' 0"6' 0"(2 438)(2 426)59(1 524)(1 511)(1 372)(1 359)(1 219)(1 207)(1 067)(1 054)(914)(902)(762)(749)(610)(597)Frame(2 134)(2 121)EEgress Notes:Check all applicable local codes for emergency egress requirements.E Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 .E1 Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 .See Design Data pages in this section for clear opening dimensions.Not to ScalePella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-9
250 Series Sliding WindowSpecial Sizes and DimensionsFixed OverXOX unitsXOXunitsFixed OverXO or OX UnitsXO orOX UnitsEASTWESTMinimumMaximumMinimumMaximum21-1/2" W x 11-1/2" H96" W x 72" H21-1/2" W x 11-1/2" H96" W x 72" H(546 x 292)(2 438 x 1 829)(546 x 292)(2 438 x 1 829)21-1/2" W x 23-1/2" H96" W x 95-1/2" H21-1/2" W x 23-1/2" H96" W x 95-1/2" H(546 x 597)(2 438 x 2 426)(546 x 597)(2 438 x 2 426)47-1/2" W x 11-1/2" H108" W x 72" H47-1/2" W x 11-1/2" H120" W x 72" H(1 207 x 292)(2 743 x 1 829)(1 207 x 292)(3 048 x 1 829)47-1/2" W x 23-1/2" H108" W x 95-1/2" H47-1/2" W x 23-1/2" H120" W x 95-1/2" H(1 207 x 597)(2 743 x 2 426)(1 207 x 597)(3 048 x 2 426)Frame area cannot be greater than 40 Ft 2 on 2-panel dual pane annealed units or greater than 50 Ft 2 on 3-panel dual pane annealed units.Gen e ral Notes :XO/OX Units:XOX Units:Rough Opening Frame Dimension 1/2"Rough Opening Frame Dimension 1/2"Maximum Frame Height Frame Width x 1.75Sash split options are 1/4 width and 1/3 width of frameBronze glass is limited to 22 Ft 2 (glass size).1/4 Vent XOX Units: Max frame height frame width X 0.875If glass width / height ratio is 5:1, then unit must be tempered.1/3 Vent XOX Units: Max frame height frame width X 1.167)Bronze glass is limited to 22 Ft 2 (glass size).If glass width / height ratio is 5:1, then unit must be tempered.Miscellaneous FormulasEqual Vent(XO and OX)ActualGlassVisibleGlassClearOpening 1Quarter Vent(XOX)Third vent(XOX)VentFixedVentFixedVentFixedHeightFH - 5.37FH - 3.25FH - 5.37FH - 3.25FH - 5.37FH - 3.25Width(FW - 4.914) 2(FW - 4.914) 2(FW 4) - 2.582(FW 2) - 1.414(FW 3) - 2.539(FW 3) - 1.5HeightFH - 6.37FH - 4.25FH - 6.37FH - 4.25FH - 6.37FH - 4.25WidthAGW - 1AGW -1AGW - 1AGW - 1AGW - 1AGW - 1HeightFH - 4.25FH - 4.25FH - 4.25Width(FW 2) - 4.958(FW 4) - 2.813(FW 3) - 4.9KEY:AGWV Actual Glass Width VentAGWF Actual Glass Width FixedAGHV Actual Glass Height VentAGHF Actual Glass Height FixedVGHV Visible Glass Height VentVGHF Visible Glass Height FixedVGWV Visible Glass Width VentVGWF Visible Glass Width Fixed(1) Calculated based on standard hardware.To convert areas to square meters (m 2 ), multiply square feet by 0.0929Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comEast and West RegionsV250-SW-10
250 Series Sliding WindowDesign ��0Egress1-Wide OX,XO Units - Equal SashE1EEEE1EEEEE1EEEEEEEEEEEFrameClear Opening(Inches)(Vent Units Only)Glass ThicknessWidthHeightWidthHeightFt 2VisibleGlassFt .38.911.914.817.720.723.626.6(mm)PerformanceClass & Grade �———————Egress Notes:Check all applicable local codes for emergency egress requirements.E Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 .E1 Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 .To convert areas to square meters (m²), multiply square feet by 0.0929.(—) Not Available(1) Maximum performance when glazed with the appropriate glass thickness.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-11
250 Series Sliding WindowDesign /3—68—0/4—08—0/4—68—0/5—0XOX 3—68—0/4—08—0/4—68—0/5—0EgressXOX Sliding Window - One Third VentWidthFrameClear Opening(Inches)(Vent Units —1/2Window — Quarter 1/247—1/2E95—1/253—1/2E95—1/259—1/2Glass ThicknessPerformanceClass & Grade 1WidthHeightFt 2VisibleGlassFt ress Notes:Check all applicable local codes for emergency egress requirements.E Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2 .E1 Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2 .To convert areas to square meters (m²), multiply square feet by 0.0929.(—) Not Available(1) Maximum performance when glazed with the appropriate glass thickness.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-12
250 Series Sliding WindowDetailed Product DescriptionFrameHardware Overall frame depth: 3-1/4" on all frame types. Frame members are mitered and heat fused to provide a fully welded cornerassembly. Sill is fitted with weeps. Frame: [1-1/8" setback nail fin for 2-1/8" wall depth] [Block frame for 3-1/4" walldepth] [Integral 5/8” flange for 3" wall depth]. Interior and exterior frame surfaces are extruded rigid PVC.Sash Sash members are extruded, rigid PVC [with optional foam insulation]. Sash members are mitered and heat-fused to provide a fully welded cornerassembly. Includes an integral extruded sash slide. Contains sealed insulating glass.Weatherstripping Sash is weatherstripped around the sash perimeter with a fin-type, pileweatherstripping.Glazing System Locks are factory-installed, zinc die cast, self aligning, [cam action locks][autolocks] located on the checkrail. One sash lock is installed on units with frame heights less than 36". One or twosash locks may be chosen on units with frame heights greater than or equal to36" Vents are equipped with two nylon roller housings containing two nylonrollers each. Hardware finish is [White] [Almond] [Fossil].Screens Set in aluminum frame and fitted to exterior of window.Screen frame finish is baked enamel, color to match exteriorSupplied complete with all necessary hardware.Conventional Black Fiberglass Black vinyl coated 18/16 mesh fiberglass screen cloth complying with ASTMD 3656 and SMA 1201.-or Hidden ScreenOptional Products Quality float glass complying with ASTM C 1036. Exterior face-glazed sealed insulating glass. Dual-Pane [[annealed] [tempered]] [[Advanced] [NaturalSun] [SunDefense ][Bronze, Advanced] Low-E coated [with Argon]] [Obscure 2 ] [High Altitude 1 ].-or 1" Triple-Pane [[annealed] [tempered]] [[Advanced] [NaturalSun] Low-E coated[with Argon]] [Obscure 2 ] [High Altitude 1 ].Interior / Exterior Window frame and sash members are [[White] [Almond] [Fossil] with integralcolor extruded throughout the profiles] [[Brown] [Black] exterior, consisting ofa solar reflective coating exceeding AAMA 613 test requirements, with Whiteintegral color extruded throughout the profiles on the interior]. All exposed PVC surfaces are smooth, glossy and uniform in appearance.Grilles Grilles-Between-the-Glass [Dual-Pane Insulating glass contains [[3/4" contoured] [5/8" flat] aluminumgrilles permanently installed between two panes of glass] [Triple-PaneInsulating glass contains 3/4" contoured aluminum grilles permanentlyinstalled between three panes of glass]. Patterns are [Traditional] [6-Lite Prairie] [9-Lite Prairie] [Top Row]. Interior grille color matches interior frame. Exterior grille color [3/4" Grille is [White] [Almond 3 ] [Fossil 3 ] [Brown][Black]] [5/8" Grille is [White] [Almond 3 ] [Fossil 3 ]].Hardware Optional limited opening hardware available for vent units in [White] [Almond][Fossil] extruded vinyl to match the unit; nominal 3-3/4" opening. Optional window opening control device available for field installation. Deviceallows window to open less than 4” with normal operation, with a releasemechanism that allows the sash to open completely. Complies with ASTMF2090-10.(1) Dual Pane IG High Altitude glazings are available with or without Argon. Triple Pane IG High Altitude glazings are only available without Argon.(2) Obscure glass not available with Bronze Advanced Low-E IG.(3) Almond grilles only available on Almond units. Almond units with grilles will have an Almond grille color, Fossil extruded color units with grilles have a Fossil grille color.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-13
250 Series Sliding WindowUnit sections - Optional Foam Insulation3 1/4" OAW[83]OHFJXHVJIFIXED HEADXHVENT HEADOSFIXED SILLXSVENT SILLXS3 1/4" OAW[83]OSOHFJFIXED JAMBIINTERLOCKERVJVENT JAMBScale 3" 1' 0"All dimensions are approximate.Pella 2022 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.comV250-SW-14
250 Series Sliding WindowUnit sections - Frame TypesNEW CONSTRUCTION FRAMEStandard Nail FinREPLACEMENT FRAMEStandard Block Frame3 1/4" OAW[83]1 11/16"[43]1 11/16"[43]Standard Nail Fin with J-Channel3/8"[10]13/16"[21]1 15/16"[49]2 1/8"[54]2 1/8"[54]1 15/16"[49]1 1/8"[29]3 1/4" OAW[83]5/8" Flush Flange - Florida Region Only2 1/8"[54]3"[77]1 15/16"[49]2 1/8"[54]2 1/8"[54]1 15/16"[49]1/2"[13]5/8"[16]1 1/8"[29]1/4"[6]1 11/16"[43]1 11/16"[43]Double-Wall Flush Flange1/4"[6]2 1/8"[54]1 15/16"[49]2 1/4"[16]3"[77]1 11/16"[43]GLAZING OPTIONS3/4" IG1" TRIPLE-PANE IG2 1/8"[54]2 1/8"[54]1 11/16"[43]1 15/16"[49]3 1/4" OAW[83]1 15/16"[49]3 1/4"
Pella 2022 Architectural Design Manual Division 08 Openings Windows and Doors www.Pella.com V250-SW-2 250 Series Sliding Window S Standard; O Optional, (—) Not available (1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values.
Pella 2022 Architectural Design Manual Division 08 - Openings Windows and Doors www.Pella.com V250-SH-3 250 Series Single-Hung S Standard; O Optional (1) Not available with triple-pane glazing. (2) Contact your local Pella sales representative for current offering. 250 Series .
Pella 2021 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.com V-ID-2 Encompass by Pella Installation Details Encompass by Pella vinyl window products are intended only for use less than 40 feet above ground level. This section presents typical construction details and available a
Pella 2021 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.com 250-SPD-1 250 Series Sliding Patio Door The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are
Pella 2022 Architectural Design Manual Division 08 - Openings Windows and Doors www.Pella.com W-POFCM-3 Pella Reserve Push-Out French Casement (1) Contact your local Pella sales representative for current designs and color options.
Door and Window Sliding Systems 3 Contents www.kawneer.co.uk Door and Window Sliding Systems Product Selector 4 AA 3720 Folding/Sliding Door 6 AA 3572 Lift/Slide Door 14 AA 3110 Horizontal Sliding Window 22 AA 3110HW Healthcare Window 28 AA 3610/AA 3610LS Vertical Sliding Windows 36 Supporting Your Projects 42
SHIFT-F5. Change the window to a 3D Window SHIFT-F6. Change the window to an IPO Window SHIFT-F7. Change the window to a Buttons Window SHIFT-F8. Change the window to a Sequence Window SHIFT-F9. Change the window to an Outliner Window SHIFT-F10. Change the window to an Image Window SHIFT-F11. Change the window to a Text Window SHIFT-F12.
The Pella logo on each page is a link back to this table of contents. Bookmarks are also included in this PDF document and are available as an additional navigation option. Pella 2021 Architectural Design Manual Division 08 – Openings Windows and Doors www.Pella.com
Biographies of regional and centre directors Regional directors Paul Johnstone – North of England Professor Paul Johnstone was director of public health for NHS North of England and substantively the regional director of public health for Yorkshire and the Humber since 2002. Paul has worked in many parts of the NHS, as a hospital doctor, GP and manager. He previously volunteered and worked .
