Installation Systems For Ceramic & Stone Tile - Schluter
info@schluter.com www.schluter.com 553650 Schluter Systems L.P. 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 Tel.: 800-267-1923 Fax: 800-477-9783 07/2015 2015 Schluter Systems L.P. Floor & Decor Special Order Catalog Installation Systems for Ceramic & Stone Tile Effective July 1, 2015
CONTENTS Finishing, edge-protection & transition profiles for floors 7 - 20 Finishing & edge-protection profiles for walls & countertops 21 - 51 Stair-nosing profiles 52 - 64 Movement joint & cove-shaped profiles 65 - 84 Schluter -KERDI-BOARD 85 - 86 Waterproofing, uncoupling, & drainage membranes Electric floor warming system 87 - 88 89 - 92 Shower system 93 - 110 EASIER INSTALLATION WITH THE Schluter I N T E G R A T E D J O I N T S P A C E R H Schluter Integrated Joint Spacer Tile or Stone 1. Select the height of profile (H) according to the tile thickness (ie. 3/8" tile 3/8" profile). 2. Press the perforated anchoring leg of the profile into the tile adhesive and align. Trowel additional adhesive over the leg. 3. Set the tile flush with the profile. The integrated joint spacer establishes a small, uniform joint (approximately 1/16"), to be filled when grouting. www.schluter.com Customer support: 800-267-1923
PRODUCT LIST IN ALPHABETICAL ORDER Schluter -DECO 13 - 14 Schluter -KERDI-LINE 105 - 107 Schluter -DECO-DE 48 Schluter -KERDI-LINE-FC Schluter -DECO-SG 48 Schluter -KERDI-SEAL 95 Schluter -DESIGNLINE 47 Schluter -KERDI-SHOWER-L/-LS 108 Schluter -DILEX-AHK 77 - 79 Schluter -KERDI-SHOWER-SB 101 Schluter -DILEX-AHKA 80 Schluter -KERDI-SHOWER-SC 100 Schluter -DILEX-AKWS 70 Schluter -KERDI-SHOWER-SR 100 Schluter -DILEX-AS 71 Schluter -KERDI-SHOWER-ST 100 Schluter -DILEX-BT 69 Schluter -KERDI-SHOWER-KIT 102 - 104 Schluter -DILEX-BWA 72 Schluter -KERDI-TROWEL 93 Schluter -DILEX-BWB 67 Schluter -QUADEC 25 - 26 Schluter -DILEX-BWS 66 Schluter -QUADEC-K Schluter -DILEX-EDP 67 Schluter -QUADEC-FS 28 Schluter -DILEX-EHK 83 Schluter -REMA 48 Schluter -DILEX-EKE 74 Schluter -RENO-RAMP 19 Schluter -DILEX-EZ 6 9 66 Schluter -RENO-RAMP-K 19 Schluter -DILEX-HK 76 Schluter -RENO-T 14 Schluter -DILEX-HKU 84 Schluter -RENO-TK 15 - 16 Schluter -DILEX-HKW 75 Schluter -RENO-U 17 - 18 Schluter -DILEX-KSA 73 - 74 Schluter -RENO-V 20 Schluter -DILEX-KSN 68 - 69 Schluter -RONDEC 28 - 40 Schluter -DILEX-PHK 81 - 82 Schluter -RONDEC-CT 41 - 42 Schluter -DITRA 87 Schluter -RONDEC-DB 47 Schluter -DITRA-XL 87 Schluter -RONDEC-STEP 43 - 45 & 53 -55 Schluter -DITRA-HEAT-E 89 - 92 Schluter -SCHIENE 8 - 11 Schluter -DITRA-ROLLER 110 Schluter -SCHIENE-STEP 46 & 56-57 Schluter -DITRA-TROWEL 88 Schluter -SHOWERPROFILE-R 110 Schluter -ECK-E 49 Schluter -SHOWERPROFILE-S 108 Schluter -ECK-K 50 Schluter -SHOWERPROFILE-WS/-WSK 109 Schluter -ECK-KI 50 Schluter -SNIPS 110 Schluter -ECK-KHK 51 Schluter -TREP-E/-EK 57 Schluter -INDEC 27 Schluter -TREP-FL Schluter -JOLLY 11 - 13, 22 - 24 Schluter -TREP-G/GK 58 - 60 Schluter -KERDI 93 Schluter -TREP-SE/-S/-B 61 - 63 Schluter -KERDI-BAND 94 Schluter -TREP-TAP 64 Schluter -KERDI-BOARD 86 Schluter -TROBA 88 Schluter -KERDI-BOARD-SN 86 & 101 Schluter -TROBA-PLUS 88 Schluter -KERDI-BOARD-ZT/-ZS 86 Schluter -KERDI-DRAIN 96 - 99 Schluter -KERDI-FIX 95 Schluter -KERDI-FLEX 88 Schluter -KERDI-KERECK-F 94 Schluter -KERDI-KERS-B 94 Schluter -KERDI-KERS 95 Schluter -KERDI-KM 95 4 For more information, please call: 800-267-1923 110 27 52
COLOR TABLE W White RAL 9010 BW Bright white RAL 9001 SP Sand pebble RAL N/A BH Bahama RAL N/A HB Light beige RAL N/A NB Nut brown RAL N/A RB Red brown RAL 8003 ZR Brick red RAL 8004 LEGEND Material A AC ACB Aluminum Color-coated aluminum Bright chrome anodized aluminum AM AMB AMG AMGB AE ACG ACGB Satin anodized aluminum Polished chrome anodized aluminum Brushed chrome anodized aluminum Satin brass anodized aluminum Bright brass anodized aluminum Polished brass anodized aluminum Brushed brass anodized aluminum AK Satin copper/bronze anodized aluminum AKB Bright copper/bronze anodized aluminum AKG Polished copper/bronze anodized aluminum AKGB Brushed copper/bronze anodized aluminum AGR AGRB AGSG GS Black RAL 9011 HG Light grey RAL 7035 TSB Tuscan beige color-coated aluminum TSOB Tuscan bronze color-coated aluminum TSG Tuscan pewter color-coated aluminum E EB Stainless steel Brushed stainless steel M MC Solid brass Chrome-plated solid brass P PVC Symbols ABGB Brushed antique bronze anodized aluminum Graphite anodized aluminum Brushed graphite anodized aluminum Bright black anodized aluminum H L mil mm in. Ø Height of tile Length Thickness in mils Millimeters Inches Diameter AGSB Brushed black anodized aluminum MATERIAL APPLICATIONS SB Black brown RAL 8019 AT Satin nickel anodized aluminum ATB Bright nickel anodized aluminum ATG Polished nickel anodized aluminum ATGB Brushed nickel anodized aluminum Material Floor Wall Heavy Duty Light Duty Moisture Resistance Chemical Resistance Stainless Steel Solid Brass Mill-finished Aluminum Anodized Aluminum Color-coated Aluminum PVC Stainless Steel: Can withstand high levels of mechanical stress, and is especially suited for areas of application where resistance to chemicals and acids is necessary. PG G Solid Brass: Can withstand high levels of mechanical stress, making it ideal for transitions subjected to heavy traffic, including exposure to wheel loads (for example: carpet to marble in hotel lobbies or industrial settings). Brass is resistant to most chemicals commonly used in tiled environments. Note: While solid brass is highly resistant to most common chemicals, it will oxidize, resulting in a natural patina. In areas exposed to moisture or aggressive substances, heavy oxidation and spotting may occur. Common brass cleaners can be used to clean the profile. CG Mill-finished Aluminum: Provides effective edge protection for residential and light commercial applications where minimum exposure to moisture and chemicals is expected. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline materials, it is important to remove mortar or grout residue from visible surfaces. Classic grey RAL N/A Grey RAL 7030 Yellow RAL 1021 Note: Colors referenced are not available for all products. Anodized Aluminum: The anodized layer creates a durable finish that retains a uniform appearance over a long period of time. Anodized aluminum provides added protection against the corrosive effects of moisture. Any anodized finish is susceptible to scratching and wear. Color-coated Aluminum: This pretreated aluminum is color-coated with a polyurethane powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Not suitable for corners or transitions subjected to heavy mechanical stresses (for example: at step edges or floor transitions). PVC: Moisture resistant. Made of rigid PVC, which resists bending or scratching. It is also UV-resistant, though not permanently color-stable, in exterior applications. Not suited for corners or transitions subjected to heavy mechanical stresses (for example: at step edges or floor transitions). For more information, please call: 800-267-1923 5
STAINLESS STEEL, CHROME-PLATED BRASS, AND SOLID BRASS E Stainless steel 304 (1.4301 V2A) High-grade stainless steel 316 L (1.4404 V4A) EB Brushed stainless steel MC Chrome-plated solid brass M Solid brass ANODIZED ALUMINUM Polished and bright anodized aluminum ACG ACB Polished chrome Bright chrome ATG ATB Polished nickel Bright nickel AKG AKB Polished copper/ bronze Bright copper/bronze AMG AMB Polished brass Bright brass AGSG Bright black Satin anodized aluminum AE AT Satin Satin nickel AK Satin copper/bronze AM Satin brass AGR Graphite Brushed anodized aluminum ACGB Brushed chrome ATGB Brushed nickel AGRB Brushed graphite AGSB Brushed black AKGB Brushed copper/ bronze AMGB COLOR-COATED ALUMINUM - TUSCAN INSPIRATIONS TSB 6 Tuscan beige TSOB Tuscan bronze TSG For more information, please call: 800-267-1923 Tuscan pewter Brushed brass ABGB Brushed antique bronze
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -SCHIENE Schluter -RENO-U Schluter -RENO-TK For more information, please call: 800-267-1923 7
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -SCHIENE 1/8" Schluter -SCHIENE is a special profile that finishes and protects the edges of tiled surfaces of the same height. However, it can also be used in conjunction with other covering materials and applications. The integrated joint spacer creates a channel for grouting the tile. (Technical data sheet available at schluter.com) * The Schluter -SCHIENE in stainless steel does not have an integrated joint spacer. Finishes: H tile thickness 3/32 1/8 3/16 1/4 9/32 5/16 11/32 3/8 7/16 1/2 17/32 9/16 5/8 11/16 3/4 13/16 7/8 1 1-1/16 1-3/16 Finishes: H tile thickness 3/32 1/8 3/16 1/4 9/32 5/16 11/32 3/8 7/16 1/2 17/32 9/16 5/8 11/16 3/4 13/16 7/8 1 1-1/16 1-3/16 8 H 1/4" - 1/2" H 3/32" - 3/16" Single spacer design 1/8" 3/32" H 17/32" - 1- 3/16" Multiple spacer design Stainless steel 304 (1.4301 V2A) (E) H Stainless steel * Brushed stainless steel 304 (1.4301 V2A) (EB) Solid brass (M) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951501670 951501724 951501938 951501952 951501970 951501981 951501993 951502007 951502011 951502023 951502054 951502183 951502199 951502217 951502258 951502294 951502341 951502390 E20 E30 E45 E60 E70 E80 E90 E100 E110 E125 E140 E150 E160 E175 E200 E225 E250 E300 951502079 951502120 951502175 100127109 951502216 - E60EB E80EB E100EB E110EB E125EB - 951501696 951501871 951501916 951501969 951501980 951501986 951501992 951502005 951502091 951502097 951502119 951502140 951502345 951502358 951502425 M30 M45 M60 M80 M90 M100 M110 M125 M150 M160 M175 M200 M225 M250 M300 Aluminum (A) Satin anodized aluminum (AE) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951500698 951500709 951500710 951500716 951500719 951500720 951500725 951500729 951500730 951500732 951500735 951500791 951500815 951500830 951500906 951500921 951500942 951500977 951501041 951501177 A20 A30 A45 A60 A70 A80 A90 A100 A110 A125 A140 A150 A160 A175 A200 A210 A225 A250 A275 A300 951500737 951500812 951500816 951500829 951500903 951500907 951500933 951500950 951500982 951501038 951501095 951501183 951501321 951501361 951501527 951501567 951501589 951501672 951501713 951501815 AE20 AE30 AE45 AE60 AE70 AE80 AE90 AE100 AE110 AE125 AE140 AE150 AE160 AE175 AE200 AE210 AE225 AE250 AE275 AE300 For more information, please call: 800-267-1923 Note: The design configuration of Schluter -SCHIENE is identical to that of Schluter -JOLLY. However, their materials and finishes do vary. Schluter -JOLLY is suited primarily for walls and countertops. However JOLLY in AM, AMGB, AK, AT, ATGB and ACGB is also suitable for floors, and may be used in such applications to increase design options. Please refer to page 22.
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -SCHIENE 1/8" Schluter -SCHIENE is a special profile that finishes and protects the edges of tiled surfaces of the same height. However, it can also be used in conjunction with other covering materials and applications. The integrated joint spacer creates a channel for grouting the tile. H 1/4" - 1/2" H 3/32" - 3/16" Single spacer design 1/8" 3/32" H 17/32" - 1- 3/16" H (Technical data sheet available at schluter.com) * The Schluter -SCHIENE in stainless steel does not have an integrated joint spacer. Finishes: H tile thickness 1/4 5/16 3/8 1/2 Finishes: H tile thickness 1/4 5/16 3/8 1/2 Stainless steel * Multiple spacer design Bright chrome anod. alu. (ACB) Bright nickel anod. alu. (ATB) Bright copper/bronze anod. alu. (AKB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951500848 951500947 951500993 951501123 A60ACB A80ACB A100ACB A125ACB 951500846 951500944 951500994 951501121 A60ATB A80ATB A100ATB A125ATB 951500845 951500945 951500992 951501125 A60AKB A80AKB A100AKB A125AKB Bright brass anod. alu. (AMB) Floor & Decor Item No. Schluter Item No. 951500847 951500946 951500991 951501122 A60AMB A80AMB A100AMB A125AMB For more information, please call: 800-267-1923 9
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -SCHIENE-RADIUS Schluter -SCHIENE-RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. SCHIENE-RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible. R Radius (Technical data sheet available at schluter.com) Finishes: H tile thickness 3/32 1/8 3/16 1/4 9/32 5/16 11/32 3/8 7/16 1/2 17/32 9/16 5/8 11/16 3/4 13/16 7/8 1 1-1/16 1-3/16 Finishes: H tile thickness 3/32 1/8 3/16 1/4 9/32 5/16 11/32 3/8 7/16 1/2 17/32 9/16 5/8 11/16 3/4 13/16 7/8 1 1-1/16 1-3/16 10 Stainless steel 304 (1.4301 V2A) (E) Brushed stainless steel 304 (1.4301 V2A) (EB) Solid brass (M) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100120021 100127281 100119999 951502074 100120286 951502105 100127380 951502165 100120179 951502189 100127455 100120252 100120138 100127331 100120054 100120211 100127141 100127422 R/E20 R/E30 R/E45 R/E60 R/E70 R/E80 R/E90 R/E100 R/E110 R/E125 R/E140 R/E150 R/E160 R/E175 R/E200 R/E225 R/E250 R/E300 100127240 100120351 100120302 100127182 - R/E60EB R/E80EB R/E100EB R/E125EB - 100127273 100119981 951502018 951502093 100127372 951502112 100120161 951502155 100120245 100120120 100127323 100120062 100120203 100127133 - R/M30 R/M45 R/M60 R/M80 R/M90 R/M100 R/M110 R/M125 R/M150 R/M160 R/M175 R/M200 R/M225 R/M250 - Aluminum (A) Satin anodized aluminum (AE) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100120005 100127257 100119965 951500948 100120260 951500978 100127356 951501039 100120146 951501084 100127448 100120229 100120104 100127307 100120039 100127398 100120187 100127117 100127299 100127406 R/A20 R/A30 R/A45 R/A60 R/A70 R/A80 R/A90 R/A100 R/A110 R/A125 R/A140 R/A150 R/A160 R/A175 R/A200 R/A210 R/A225 R/A250 R/A275 R/A300 100120013 100127265 100119973 951501358 100120278 951501514 100127364 951501526 100120153 951501585 100127463 100120237 100120112 100127315 100120047 100127414 100120195 100127125 100127349 100127430 R/AE20 R/AE30 R/AE45 R/AE60 R/AE70 R/AE80 R/AE90 R/AE100 R/AE110 R/AE125 R/AE140 R/AE150 R/AE160 R/AE175 R/AE200 R/AE210 R/AE225 R/AE250 R/AE275 R/AE300 For more information, please call: 800-267-1923
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -SCHIENE-RADIUS Schluter -SCHIENE-RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. SCHIENE-RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible. R Radius (Technical data sheet available at schluter.com) Finishes: H tile thickness 1/4 5/16 3/8 1/2 Finishes: H tile thickness 1/4 5/16 3/8 1/2 Bright chrome anod. alu. (ACB) Bright nickel anod. alu. (ATB) Bright copper/bronze anod. alu. (AKB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100127216 100120336 100120088 100127158 R/A60ACB R/A80ACB R/A100ACB R/A125ACB 100127224 100120344 100120096 100127166 R/A60ATB R/A80ATB R/A100ATB R/A125ATB 100127232 100120310 100120294 100127190 R/A60AKB R/A80AKB R/A100AKB R/A125AKB Bright brass anod. alu. (AMB) Floor & Decor Item No. Schluter Item No. 100127208 100120328 100120070 100127174 R/A60AMB R/A80AMB R/A100AMB R/A125AMB Schluter -JOLLY (Anodized aluminum) 1/8" The design configuration of Schluter -SCHIENE is identical to that of Schluter -JOLLY. However, their materials and finishes do vary. Schluter -JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK, AKGB, AT, ATGB, ACGB, and ABGB is also suitable for floors, and may be used in such applications to increase design options. H (Technical data sheet available at schluter.com) Finishes: H tile thickness 1/4 5/16 3/8 1/2 Brushed chrome anod. alu. (ACGB) Satin nickel anod. alu. (AT) Brushed nickel anod. alu. (ATGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951501096 951501172 951501353 951501512 A60ACGB A80ACGB A100ACGB A125ACGB 951501002 951501082 951501120 951501276 A60AT A80AT A100AT A125AT 951501330 951501354 951501375 951501494 A60ATGB A80ATGB A100ATGB A125ATGB For more information, please call: 800-267-1923 11
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -JOLLY (Anodized aluminum) 1/8" The design configuration of Schluter -SCHIENE is identical to that of Schluter -JOLLY. However, their materials and finishes do vary. Schluter -JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK, AKGB, AT, ATGB, ACGB, and ABGB is also suitable for floors, and may be used in such applications to increase design options. H (Technical data sheet available at schluter.com) Finishes: H tile thickness 1/4 5/16 3/8 1/2 Finishes: H tile thickness 1/4 5/16 3/8 1/2 Satin copper/bronze anod. alu. (AK) Brushed copper/bronze anod. alu. (AKGB) Brushed antique bronze anod. alu. (ABGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951501001 951501083 951501124 951501274 A60AK A80AK A100AK A125AK 951501328 951501355 951501374 951501493 A60AKGB A80AKGB A100AKGB A125AKGB 951501492 951501523 951501583 951501673 A60ABGB A80ABGB A100ABGB A125ABGB Satin brass anod. alu. (AM) Brushed brass anod. alu. (AMGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951500828 951500844 951500974 951501068 A60AM A80AM A100AM A125AM 951501277 951501319 951501473 951501521 A60AMGB A80AMGB A100AMGB A125AMGB Schluter -JOLLY RADIUS Schluter -JOLLY RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. JOLLY RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tileto-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible. R Radius (Technical data sheet available at schluter.com) Finishes: H tile thickness 1/4 5/16 3/8 1/2 Finishes: H tile thickness 1/4 5/16 3/8 1/2 12 Brushed chrome anod. alu. (ACGB) Satin nickel anod. alu. (AT) Brushed nickel anod. alu. (ATGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100119643 100119759 100119692 100119585 R/A60ACGB R/A80ACGB R/A100ACGB R/A125ACGB 100119684 100119791 100050012 100119627 R/A60AT R/A80AT R/A100AT R/A125AT 100119650 100119767 100119700 100119593 R/A60ATGB R/A80ATGB R/A100ATGB R/A125ATGB Satin copper/bronze anod. alu. (AK) Brushed copper/bronze anod. alu. (AKGB) Brushed antique bronze anod. alu. (ABGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100119668 100119775 100119718 100119601 R/A60AK R/A80AK R/A100AK R/A125AK 100119817 100119882 100119866 100119833 R/A60AKGB R/A80AKGB R/A100AKGB R/A125AKGB 100119841 100119874 100106798 100053149 R/A60ABGB R/A80ABGB R/A100ABGB R/A125ABGB For more information, please call: 800-267-1923
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -JOLLY RADIUS Schluter -JOLLY RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. JOLLY RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tileto-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible. R Radius (Technical data sheet available at schluter.com) Satin brass anod. alu. (AM) Finishes: H tile thickness 1/4 5/16 3/8 1/2 Brushed brass anod. alu. (AMGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100119676 100119783 100119726 100119619 R/A60AM R/A80AM R/A100AM R/A125AM 100119635 100119809 100119742 100119577 R/A60AMGB R/A80AMGB R/A100AMGB R/A125AMGB Schluter -DECO 1/4" Schluter -DECO has a 1/4"-wide visible surface for creating decorative joint designs in tiled surfaces. H Aluminum and MC80D 1/4" (Technical data sheet available at schluter.com) H Brass 1/4" H Stainless steel Finishes: H tile thickness 5/16 11/32 3/8 7/16 1/2 17/32 5/8 23/32 13/16 1 1-3/16 Stainless steel 304 (1.4301 V2A) (E) Solid brass (M) Chrome-plated solid brass (MC) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951502073 951502090 951502103 951502121 951502149 951502166 951502192 951502230 951502260 951502319 951502359 E80D E90D E100D E110D E125D E140D E160D E185D E210D E250D E300D 100114792 100114818 951502160 - M90D M110D M125D - 951502633 100114784 100114800 951502644 - MC80D MC90D MC110D MC125D - Schluter -DECO profiles can be produced with a special perforated anchoring leg to radius the profile: R Radius Available in all materials except stainless steel. Call for pricing For more information, please call Customer Support Item No.: R / Profile No. (e.g., R/AE80D) For more information, please call: 800-267-1923 13
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -DECO 1/4" Schluter -DECO has a 1/4"-wide visible surface for creating decorative joint designs in tiled surfaces. H Aluminum and MC80D 1/4" (Technical data sheet available at schluter.com) H Brass 1/4" H Stainless steel Finishes: H tile thickness 5/16 3/8 1/2 Satin anodized aluminum (AE) Floor & Decor Item No. Schluter Item No. 951501360 951501581 951501666 AE80D AE100D AE125D Schluter -DECO profiles can be produced with a special perforated anchoring leg to radius the profile: R Radius Available in all materials except stainless steel. Call for pricing For more information, please call Customer Support Item No.: R / Profile No. (e.g., R/AE80D) Schluter -RENO-T W Schluter -RENO-T is retrofitted to adjoin different types of floor coverings of the same height. (Technical data sheet available at schluter.com) 11/32" Stainless steel W 11/32" Aluminum, Brass Finishes: W in. 17/32 1 Finishes: W in. 17/32 1 Finishes: W in. 17/32 1 14 Stainless steel 304 (1.4301 V2A) (E) Brushed stainless steel 304 (1.4301 V2A) (EB) Solid brass (M) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951501900 951502113 T9/14E T9/25E 951501942 951502231 T9/14EB T9/25EB 951501341 951501990 T9/14M T9/25M Satin anodized aluminum (AE) Satin nickel anod. alu. (AT) Satin copper/bronze anod. alu. (AK) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951500727 951501042 T9/14AE T9/25AE 951500736 951501351 T9/14AT T9/25AT 951500734 951501352 T9/14AK T9/25AK Satin brass anod. alu. (AM) Floor & Decor Item No. Schluter Item No. 951500731 951501067 T9/14AM T9/25AM For more information, please call: 800-267-1923
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -RENO-TK Schluter -RENO-TK provides a smooth transition between tiled surfaces and lower neighboring floor coverings. In addition, the edge of the adjacent floor covering is effectively protected. (Technical data sheet available at schluter. com) 5/16" - 1/2" 1/4" Aluminum Stainless steel, Brass H 5/16" - 3/8" 1/4" Aluminum Stainless steel 304 (1.4301 V2A) (E) H tile thickness Brushed stainless steel 304 (1.4301 V2A) (EB) Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951502228 951502321 100126788 951502407 ETK80 ETK100 ETK110 ETK125 951502435 951502461 100126770 951502492 EBTK80 EBTK100 EBTK110 EBTK125 951502008 951502067 951502376 MTK80 MTK100 MTK125 Satin anodized aluminum (AE) Finishes: Bright chrome anod. alu. (ACB) Satin nickel anod. alu. (AT) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951500952 951501043 951501175 951501596 AETK60 AETK80 AETK100 AETK125 951501091 951501176 951501326 951501695 ATK60ACB ATK80ACB ATK100ACB ATK125ACB 951501174 951501327 951501598 951501719 ATK60AT ATK80AT ATK100AT ATK125AT 1/4 5/16 3/8 1/2 Brushed nickel anod. alu. (ATGB) Finishes: H tile thickness Solid brass (M) Floor & Decor Item No. 5/16 3/8 7/16 1/2 H tile thickness H 1/2" 1/4" Aluminum Finishes: H 1/4" 1/4" Satin copper/bronze anod. alu. (AK) Brushed copper/bronze anod. alu. (AKGB) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951501690 951501728 951501978 ATK80ATGB ATK100ATGB ATK125ATGB 951501173 951501323 951501599 951501720 ATK60AK ATK80AK ATK100AK ATK125AK 951501691 951501727 951501976 ATK80AKGB ATK100AKGB ATK125AKGB 1/4 5/16 3/8 1/2 Finishes: Brushed antique bronze anod. alu. (ABGB) H tile thickness Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 951501689 951200282 951501977 ATK80ABGB ATK100ABGB ATK125ABGB 951501092 951501311 951501348 951501698 ATK60AMB ATK80AMB ATK100AMB ATK125AMB 1/4 5/16 3/8 1/2 Diagram Values Bright brass anod. alu. (AMB) LB ADA-Compliant H 1/4" H in. 1/4 5/16 3/8 7/16 1/2 LB in. Aluminum Stainless steel/Brass 19/64 21/64 21/64 39/64 9/32 7/16 17/32 21/32 For more information, please call: 800-267-1923 15
FINISHING, EDGE-PROTECTION & TRANSITION PROFILES FOR FLOORS All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing. Schluter -RENO-TK-RADIUS Schluter -RENO-TK-RADIUS has a special perforated anchoring leg to radius the profile. H 1/4" 1/4" H 5/16" - 3/8" 1/4" Aluminum Aluminum H 5/16" - 1/2" 1/4" R Radius Brass Solid brass (M) Finishes: H tile thickness Satin anodized aluminum (AE) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100126986 100126887 R/MTK80 R/MTK100 100126820 100126994 100126895 R/AETK60 R/AETK80 R/AETK100 100126812 100126929 100126838 R/ATK60ACB R/ATK80ACB R/ATK100ACB 1/4 5/16 3/8 Satin nickel anod. alu. (AT) Finishes: H tile thickness Bright chrome anod. alu. (ACB) Brushed nickel anod. alu. (ATGB) Satin copper/bronze anod. alu. (AK) Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100126796 100127000 100126911 R/ATK60AT R/ATK80AT R/ATK100AT 100126952 100126861 R/ATK80ATGB R/ATK100ATGB 100127018 100126978 100126903 R/ATK60AK R/ATK80AK R/ATK100AK 1/4 5/16 3/8 Finishes: Brushed copper/bronze anod. alu. (AKGB) H tile thickness Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. Floor & Decor Item No. Schluter Item No. 100126937 100126853 R/ATK80AKGB R/ATK100AKGB 100126945 100126846 R/ATK80ABGB R/ATK100ABGB 100126804 100126960 100126879 R/ATK60AMB R/ATK80AMB R/ATK100AMB 1/4 5/16 3/8 Diagram Values Brushed antique bronze anod. alu. (ABGB) LB ADA-Compliant H 1/4" H in. 1/4 5/16 3/8 16 LB in. Aluminum Stainless steel/Brass 19/64 21/64 21/64 9/32 7/16 For more information, please call: 800-267-1923 Bright brass anod. alu. (AMB)
FINISHING,
Tile or Stone www.schluter.com Customer support: 800-267-1923 1. Select the height of profile (H) according to the tile thickness (ie. 3/8" tile 3/8" profile). 2. Press the perforated anchoring leg of the profile into the tile adhesive and align. Trowel additional adhesive over the leg. 3. Set the tile flush with the profile.
PSI AP Physics 1 Name_ Multiple Choice 1. Two&sound&sources&S 1∧&S p;Hz&and250&Hz.&Whenwe& esult&is:& (A) great&&&&&(C)&The&same&&&&&
Argilla Almond&David Arrivederci&ragazzi Malle&L. Artemis&Fowl ColferD. Ascoltail&mio&cuore Pitzorno&B. ASSASSINATION Sgardoli&G. Auschwitzero&il&numero&220545 AveyD. di&mare Salgari&E. Avventurain&Egitto Pederiali&G. Avventure&di&storie AA.&VV. Baby&sitter&blues Murail&Marie]Aude Bambini&di&farina FineAnna
The program, which was designed to push sales of Goodyear Aquatred tires, was targeted at sales associates and managers at 900 company-owned stores and service centers, which were divided into two equal groups of nearly identical performance. For every 12 tires they sold, one group received cash rewards and the other received
sliding velocity. Friction coefficients are very high for the ceramic/ceramic pair beginning at 0.60 -4-0.10 (very erratic) at room temperature and steadily increasing with temperature to above 1.0 at 900 C. The friction coefficient for the ceramic/metal pair is about the same as that of the ceramic/ceramic pair at
Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original
College"Physics" Student"Solutions"Manual" Chapter"6" " 50" " 728 rev s 728 rpm 1 min 60 s 2 rad 1 rev 76.2 rad s 1 rev 2 rad , π ω π " 6.2 CENTRIPETAL ACCELERATION 18." Verify&that ntrifuge&is&about 0.50&km/s,∧&Earth&in&its& orbit is&about p;linear&speed&of&a .
10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan
service i Norge och Finland drivs inom ramen för ett enskilt företag (NRK. 1 och Yleisradio), fin ns det i Sverige tre: Ett för tv (Sveriges Television , SVT ), ett för radio (Sveriges Radio , SR ) och ett för utbildnings program (Sveriges Utbildningsradio, UR, vilket till följd av sin begränsade storlek inte återfinns bland de 25 största
