Auto Switch Mounting Brackets/Part No.
Series CM2Auto Switch Mounting Brackets/Part No.Bore size (mm)Auto switch modelø20D-M9l(V)D-M9lW(V)D-A9l(V)D-M9lA(V) Note 2)ø25ø32ø40BM5-020BM5-025BM5-032BM5-040(A set of a, b, c, d)(A set of a, b, c, d)(A set of a, b, c, d)(A set of a, b, c, d)BM5-020SBM5-025SBM5-032SBM5-040S(A set of b, c, d, e)(A set of b, c, d, e)(A set of b, c, d, e)(A set of b, c, d, e)Switch bracket (Resin)a Transparent (Nylon) Note 1)e White (PBT)Auto switchbSwitch holder(Zinc)dAuto switch mounting screwcAuto switch mounting M2-025ABM2-032ABM2-040A(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw)BM2-020ASD-H7BABM2-025ASBM2-032ASBM2-040AS(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and 2-040(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw)BM3-020BM3-025BM3-032BM3-040D-A3lA/A44A Note 3)(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw)D-G39A/K39ANote 1) Since the switch bracket (made from nylon) are affected in an environment where alcohol, chloroform,methylamines, hydrochloric acid or sulfuric acid is splashed over, so it cannot be used. Please contactSMC regarding other chemicals.Note 2) As the indicator LED is projected from the switch unit, indicator LED may be damaged if the switchbracket is fixed on the indicator LED.Note 3) The D-A3 A/A44A/G39A/K39A cannot be mounted on the centralized piping type CDM2 P series.Band Mounting Brackets Set Part No.Set part no.ContentsBM2-lllA(S) Auto switch mounting band (c) Auto switch mounting screw (d)BJ4-1 Switch bracket (White/PBT) (e) Switch holder (b)BJ5-1 Switch bracket (Transparent/Nylon) (a) Switch holder (b)* S: Stainless steel screwOther than the applicable auto switches listed in “How to Order”, the following auto switches are mountable.Refer to the WEB catalog or the Best Pneumatics No. 2 for the detailed specifications.TypeModelElectrical entryD-H7A1, H7A2, H7BSolid stateD-H7NW, H7PW, H7BWD-H7BA—Grommet (In-line)D-G5NTReedD-B53, C73, C76D-C80FeaturesDiagnostic indication (2-color indication)Water resistant (2-color indication)With timerGrommet (In-line)—Without indicator light* With pre-wired connector is also available for solid state auto switches. For details, refer to the WEB catalog or the Best Pneumatics No. 2.* Normally closed (NC b contact) solid state auto switches (D-F9G/F9H) are also available. For details, refer to the WEB catalog or the Best Pneumatics No. 2.99
SeriesCG1Auto Switch Mounting Brackets/Part No.Bore size (mm)Auto switch model80100————D-H7 D-H7 -063AD-H7NF(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw)D-C7 SBMA2-040ASBMA2-050ASBMA2-063AS(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw)——D-M9 (V)D-M9 W(V)D-A9 3-050BMA3-063(A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, 3-063SD-M9 A(V) Note 2) (A set of b, c, d, e) (A set of b, c, d, e) (A set of b, c, d, e) (A set of b, c, d, e) (A set of b, c, d, e) (A set of b, c, d, e)Switch bracket (Resin)a Transparent (Nylon) Note 1)e White (PBT)Auto switchbSwitch holderdAuto switchmounting screwcAuto switch mounting band Band (c) is mounted so that the projected part ison the internal side (contact side with the tube).D-H7BAD-G5 /K59D-G5 08BA-10D-G5NT(A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw) (A set of band and screw)D-B5 /B64D-B59WD-G5NBNote 1) Since the switch bracket (made from nylon) are affected in an environment where alcohol, chloroform, methylamines, hydrochloric acid or sulfuricacid is splashed over, so it cannot be used.Please contact SMC regarding other chemicals.Note 2) As the indicator LED is projected from the switch unit, indicator LED may be damaged if the switch bracket is fixed on the indicator LED.Band Mounting Brackets Set Part No.Set part no.ContentsBMA2- A(S)· Auto switch mounting band (c)· Auto switch mounting screw (d)BJ4-1· Switch bracket (White/PBT) (e)· Switch holder (b)BJ5-1· Switch bracket (Transparent/Nylon) (a)· Switch holder (b) S: Stainless steel screw[Stainless Steel Mounting Screw]The following stainless steel mounting screw kit is available. Use it in accordance with the operating environment.(Since the auto switch mounting bracket is not included, order it separately.)BBA3: D-B5/B6/G5/K5 typesNote 3) Refer to the WEB catalog or the Best Pneumatics No. 2 for details on the BBA3.When the D-G5BA type auto switch is shipped independently, the BBA3 is attached.73
SeriesCJ2Operating RangeRail mountingBand mountingAuto switch -M9lW/M9lWVD-M9lA/M9lAVAuto Switch Mounting Brackets/Part No.[mm]Bore WAutoswitch Auto switch modelmountingBore size 6(A set of a, b, d, f)BJ6-010(A set of a, b, c, d)BJ6-016(A set of a, b, c, d)D-M9lA 2D-M9lAV 2BJ6-006S(A set of a, b, d, g)BJ6-010S(A set of a, b, d, e)BJ6-016S(A set of a, b, d, e)Switch bracket (Resin)c Transparent (Nylon) 1f Transparent blue (Nylon) 1e White (PBT)g Black (PBT)BandmountingbAuto switch mounting screwd—89—1113 : Values which include hysteresis are for guidelinepurposes only, they are not a guarantee(assuming approximately 30% dispersion) andmay change substantially depending on theambient environment.Switch holder(Zinc die-casted)aAuto switch mounting bandD-H7l/H7lWBandD-H7BA/H7NFmounting D-C7l/C80D-C73C/C80CBJ2-006(A set of band andscrew)BJ2-010(A set of band andscrew)BJ2-016(A set of band andscrew)BQ2-012 (S)(A set of a and b)BQ2-012 (S)(A set of a and b)aAuto switchmounting bracketD-M9lD-M9lVD-M9lW 4D-M9lWVRail 4mounting D-M9lAD-M9lAV 4D-A9lD-A9lV—Set screw(Accessory)BQ2-012BQ2-012SbAuto switchmounting screwNut (Cylinder accessory) 1: Since the switch bracket (made from nylon) are affected in an environment where alcohol,chloroform, methylamines, hydrochloric acid or sulfuric acid is splashed over, so it cannot beused. Please contact SMC regarding other chemicals. 2: As the indicator LED is projected from the auto switch unit, indicator LED may be damaged ifthe switch bracket is fixed on the indicator LED. 3: When the cylinder is shipped, the auto switch mounting bracket and the auto switch will beincluded. 4: For D-M9 A(V), order the BQ2-012S, which uses stainless steel mounting screws.Band Mounting Brackets Set Part No.Set part no.ContentsBore size [mm]61016BJ2-lll Auto switch mounting band (a) Auto switch mounting screw (b)BJ2-006BJ2-010BJ2-016BJ4-1 Switch bracket (White/PBT) (e) Switch holder (d)—VVBJ4-2 Switch bracket (Black/PBT) (g) Switch holder (d)V——BJ5-1 Switch bracket (Transparent/Nylon) (c) 1 Switch holder (d)—VVBJ5-2 Switch bracket (Transparent blue/Nylon) (f) 1 Switch holder (d)V——[Stainless Steel Mounting Screw]The following stainless steel mounting screw kit is available. Use it in accordance with the operatingenvironment. (Since the auto switch mounting bracket is not included, order it separately.)BBA4: For D-C7/C8/H7 types 5: Refer to the WEB catalog or the Best Pneumatics No. 2 for details on the BBA4.When the D-H7BA type auto switch is shipped independently, the BBA4 is attached.107
Series NCMAuto Switch MountingAuto Switch Mounting Bracket Part No.Auto switch modelD-M9 (V)D-M9 W(V)D-A9 (V)D-H7 D-H7 WD-H7BALD-H7NFD-C7 /80D-C73C/80CD-G5NTLD-B5 /B59W/B64Bore size044Note 1)056075Note 1)088Note 1)106Note 1)NBM2-075BJ3-1Note 1)NBM2-088BJ3-1125Note 1)NBM2-106BJ3-1NBM2-125BJ3-1150Note 1)NBM2-150BJ3-1200Note Note 1) Two types of auto switch mounting brackets are used as a set.Note 2) D-G5NTL, B5 , B64, B59W cannot be mounted on models with bore size 044 and 056.eSwitch spacer(Stainless steel)dSwitch holder(Resin)Auto switchSet screw (Not used)cSwitch bracket(Stainless steel)bSwitch mounting screwCylinder tubingA set of the parts marked a and b in the diagram is usedfor types BJ2- , NBM2- , and NCMB-200.A set of the parts marked c , d and e in the diagram isused for type BJ3-1.a Switch mounting bandStainless steel screw setThe set of stainless steel mounting screws described below is available and can be used depending on the operating environment.As auto switch bracket is not included, order separately.Detailed Contents of Stainless Steel Mounting Screw SetsPart no.DescriptionContentSizeQty.Applicable auto switchmounting bracket part no.BBA3Auto switchmounting 5NTLD-B5 D-B64BBA4Auto switchmounting 0NCMB-200D-H7 D-C7 D-C80 D-H7BAL switch is set on the cylinder with the stainless steel screws (BBA4) above when shipped.When only a switch is shipped independently, BBA4 screws are attached.53Applicableauto switch
C85/C75 SeriesAuto Switch Mounting Bracket/Set Part Nos.C85 SeriesAuto switchAuto switch modelmountingC75 SeriesBore size -025BM5-032BM5-040(A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, d) (A set of a, b, c, SBM5-025SBM5-032SBM5-040S(A set of a, b, c, e) (A set of a, b, c, e) (A set of a, b, c, e) (A set of a, b, c, e) (A set of a, b, c, e) (A set of a, b, c, e) (A set of a, b, c, e) (A set of a, b, c, e)(Screw: Stainless steel) (Screw: Stainless steel) (Screw: Stainless steel) (Screw: Stainless steel) (Screw: Stainless steel) (Screw: Stainless steel) (Screw: Stainless steel) (Screw: Stainless steel)*1*2*3*4Switch bracket (Resin)d Transparent (Nylon) 1e White (PBT)BandmountingbAuto switch mounting screwcSwitch holder (Zinc NFD-M9l(V)*8D-M9lW(V)*8D-M9lA(V)*8D-A9l(V)*7aAuto switch mounting 2-032ABM2-040A(A set of a and b) (A set of a and b) (A set of a and b) (A set of a and b) (A set of a and b) (A set of a and b) (A set of a and b) (A set of a and b)BQ2-012 (S)(A set of f and g)*5*6fSet screw(Unused)Auto switch mounting bracketRailmountingBracket fixing screw(Cylinder accessory)gAuto switch mounting screwNut(Cylinder accessory)*1 S ince the switch bracket for band mounting (made from nylon) are affected in an environment where alcohol, chloroform, methylamines, hydrochloricacid or sulfuric acid is splashed over, so it cannot be used. Please contact SMC regarding other chemicals.*2 In the case of band mounting auto switches, make sure the indicator LED is not directly below switch mounting bracket when mounted as the protrudingLED may be damaged.*3 For band mounting, switch brackets are mounted on the cylinder when small switches are specified. (switches are not mounted, but packaged together).*4 For band mounting, when specifying the switches other than the small switches, auto switch(s) are mounted on the cylinder.*5 For rail mounting, the auto switches and auto switch mounting brackets are packed together (not assembled).*6 For rail mounting, when D-M9mA(V) is ordered separately, select the stainless steel mounting screw set BQ2-012S.*7 When mounting a band and/or a rail on bore size ø8, ø10 or ø12 cylinder, D-A9l(V) type cannot be mounted.*8 When mounting a rail on bore size ø20 or ø25 cylinder, D-M9l(V), M9lW(V) and M9lA(V) types cannot be mounted.Auto Switch Mounting Bracket/Single Unit Part Nos.C85 SeriesAuto switchmodelD-M9l(V)D-M9lW(V)D-A9l(V)C75 -2BJ2-008SBJ2-012SBJ2-016SBM2-020AS BM2-025AS BM2-032AS BM2-040ASD-M9lA(V)BJ4-2· Auto switch mounting band (a)· Auto switch mounting screw (b)· Switch holder (c)· Switch bracket (d)BJ5-1BJ2-010SParts lineup· Auto switch mounting band (a)· Auto switch mounting screw (b)· Switch holder (c)· Switch bracket (e)BJ4-1[Stainless Steel Mounting Screw]The following stainless steel mounting screw kit is available. Use it in accordance with the operating environment. (Since the auto switch mounting bracket is notincluded, order it separately.)BBA4: For D-C7/C8/H7 types* Refer to the Web Catalog or Best Pneumatics No. 2-1 for details on the BBA4.When the D-H7BA type auto switch is shipped independently, the BBA4 is attached.Other than the applicable auto switches listed in “How to Order”, the following auto switches are mountable.Refer to Best Pneumatics No. 2-1 for the detailed specifications.TypeReedSolid stateModelD-C73, C76D-C80D-H7A1, H7A2, H7BD-H7NW, H7PW, H7BWElectrical entryGrommet (In-line)Grommet (In-line)Features—Without indicator light—Diagnostic indication (2-color indicator)MountingApplicable bore sizeBandø8 to ø25Bandø8 to ø25* Normally closed (NC b contact) solid state auto switches (D-F9G/F9H) are also available. For details, refer to Best Pneumatics No. 2-1.* With pre-wired connector is also available for solid state switches. For details, refer to Best Pneumatics No. 2-1.111
Compact Cylinder: Axial PipingSeriesCDQP24 Auto Switch Mounting Brackets/Part No.Applicable Cylinder Series: CDQP2, CDQP2 - S/- T (Axial piping)Bore size (mm)Auto switchmounting surfaceø32 to ø100ø12, ø16, ø20, ø25CABAuto switch mounting surfaceAuto switchmodelAuto switch mounting surfaceAuto switch mounting rail side onlyA/B/C sideBQ-1BQ2-012Two kinds of auto switch brackets are used as a set.D-A9 D-A9 VD-M9 D-M9 VD-M9 WD-M9 WVD-M9 AD-M9 AVBQ-2BQ2-012Two kinds of auto switch brackets are used as a set.Set screw(Not used)Set screw(Not used)wwqqNote 1) When shipping cylinders, auto switch mounting brackets and auto switches are shipped together.Auto switch modelD-A7 /A80D-A73C/A80CD-A7 H/A80HD-A79WD-F7 /J79D-F7 VD-J79CD-F7 W/J79WD-F7 WVD-F7BA/F7BAVD-F79F/F7NTD-P4DWBore size (mm)ø12 to ø25BQ-1ø32ø40 to ø100BQ-2[Stainless Steel Mounting Screw Kit]The following stainless steel mounting screw kit (with nuts) is available. Use it inaccordance with the operating environment. (Since auto switch spacer (forBQ-2) is not included, order BQ-2 separately.)BBA2: For D-A7/A8/F7/J7 typesThe above stainless steel screws are used when a cylinder is shipped with theD-F7BA/F7BAV auto switches.When only an auto switch is shipped independently, BBA2 is attached.Note 4) Refer to page 1659 for details of BBA2.Note 5) When the D-M9 A(V) type is mounted, order auto switch mountingbrackets BQ2-012S, BQ-2 or the stainless steel mounting screw kitBBA2 separately.Auto Switch Mounting Bracket/Weight—BQP1-050Note 2) When shipping cylinders, auto switch mounting brackets and autoswitches are shipped together.However, when the D-P4DW type with ø40 to ø100 is mounted, the autoswitch is assembled at the time of shipment.Note 3) Refer to pages 1658 to 1660 for further information on auto switchmounting method.Mounting bracket part no. Applicable bore sizeø12 to ø251.5BQ-2ø32 to ø1001.5BQ2-012ø12 to ø255BQP1-050ø40 to ø10016CUCQSCQ2-ZRQWeight (g)BQ-1CUJCQMCQUMU-ZD- -X Technicaldata911
Compact Cylinder: With End LockSeriesCDBQ24 Auto Switch Mounting Brackets/Part No.Applicable Cylinder Series: CDBQ2 (With end lock)Auto switchmounting surfaceBore size (mm)ø20, ø25ø32, ø40, ø50Cø63, ø80, ø100Port sidePort sidePort sideCAACABBBD-A9 D-A9 VD-M9 D-M9 VD-M9 WD-M9 WVD-M9 AD-M9 AVAuto switch mounting surfaceAuto switch mounting surfacePort sidePort/A/B/C sideAuto switch mounting bracketsare not required.Auto switch mounting bracketsare not required.Auto switchmodelAuto switch mounting surfaceA/B/C sidePort/A/B/C sideBQ-2BQ2-012Two kinds of auto switch brackets areused as a set.Set screw(Not used)Auto switch mounting bracketsare not required.wqNote 1) When a compact auto switch is mounted on the three sides (A, B and C above) other than the port side of ø32 to ø50 cylinders,auto switch mounting brackets shown above are required. Order them separately from cylinders.(The above is also applicable when a compact auto switch is mounted using an auto switch mounting rail, but not using acompact auto switch installation groove for ø63 to ø100 cylinders.)Ordering exampleCDBQ2B32-50D-M9BW······1 pc.BQ-2······2 pcs.BQ2-012······2 pcs.Note 2) When shipping cylinders, auto switch mounting brackets and auto switches are shipped together.Auto switch modelBore size (mm)32D-A7 /A80D-A73C/A80CD-A7 H/A80HD-A79WD-F7 /J79D-F7 VD-J79CD-F7 W/J79WD-F7 inless Steel Mounting Screw Kit]The following stainless steel mounting screw kit (with nuts) is available. Use it inaccordance with the operating environment. (Since auto switch spacer (for BQ2) is not included, order BQ-2 separately.)BBA2: For D-A7/A8/F7/J7 typesThe above stainless steel mounting screws are used when a cylinder is shippedwith the D-F7BA/F7BAV auto switches.When only an auto switch is shipped independently, BBA2 is attached.Note 5) Refer to page 1659 for details of BBA2.Note 6) When the D-M9 A(V) type is mounted on a port side other than ø32,ø40 or ø50, order auto switch mounting brackets BQ2-012S, BQ-2 orthe stainless steel mounting screw kit BBA2 separately.—BQP1-050Mounting bracketpart no.1.5BQ2-0125BQP1-050CQSCQ2-ZRQCQUWeight (g)BQ-2CUCQMAuto Switch Mounting Bracket/WeightNote 3) When shipping cylinders, auto switch mounting brackets and autoswitches are shipped together.Note 4) Refer to pages 1658 to 1660 for further information on auto switchmounting method.CUJMU-Z16D- -X Technicaldata939
Compact CylinderSeriesCDQ24 Auto Switch Mounting Brackets/Part No.Applicable Cylinder Series: CDQ2, CDQ2W, CDQ2 - S/- T (Single acting), CDQ2, CDQ2W (Largebore size), CDQ2K, CDQ2KW (Non-rotating rod), CDQ2 (Long stroke),CDQ2 S (Anti-lateral load), CDQ2 R/ V (Water resistant)D-M9 /M9 VD-M9 W/M9 WVD-M9 A/M9 AVD-A9 /A9 VApplicableauto switchBore size (mm)Auto switch mountingbracket part no.D-F7 /F7 V/J79/J79C/F7 W/J79W/F7 WVD-F7BA/F7BAV/F79F/F7NTD-A7 /A80/A7 H/A80H/A73C/A80C/A79WD-P3DWAø12 to ø200ø12 to ø25ø32 to ø160ø32 to ø100—BQ4-012BQ5-032— Auto switch fixing screw Auto switch mounting screwAuto switchmounting bracketfitting partslineup/Weight(M2.5 x 8L) Auto switch mounting nutWeight: 1.5 g—(M3 x 8L) Auto switch spacer Auto switch mounting nutWeight: 3.5 g—When requesting the enclosure of the auto switch mounting brackets (2 pcs.)with the cylinder for shipment, add “-BQ” to the end of the cylinder model number.Standard model no. BQ Example) CDQ2B32-30DZ-BQ/CDQ2B32-30DZ-BQ-XC4 (Made to Order)Surfaces with auto switch mounting slotø12Auto switchmounting surface(M2.5 x 10L) Auto switch mounting screwø16 toø25Auto switch mounting rail side onlyA/B/C side except port sidePort sideCø32 to ø200Surfaces with auto switch mounting slotø12Aø16 to ø25BAuto switchmounting screwAutoswitchMounting ofauto switch When tightening the auto switchmounting screw, use a watchmakers’ screwdriver with a handle 5 to6 mm in diameter.Tightening torque for autoswitch mounting s
BM2-lllA(S) *S: Stainless steel screw Auto switch mounting band (c) Auto switch mounting screw (d) BJ4-1 Switch bracket (White/PBT) (e) Switch holder (b) BJ5-1 Switch bracket (Transparent/Nylon) (a) Switch holde
auto auto auto. frozen drinks smoothies puree med high pulse low / dough. auto auto auto. frozen drinks smoothies puree med high pulse low / dough. auto auto auto. frozen drinks smoothies puree med high pulse low / dough. auto auto auto. please keep these important safeguards in mind when using the . appliance: mportant: make sure that the .
134-1400 LS EP Switch 265-1002 134-1402 LS EP Switch 265-1006 Original Part No. Mfg. Description Part No. 134-1403 LS EP Switch 265-1005 134-1404 LS EP Switch 265-1002 134-1405 LS EP Switch 265-1004 134-1406 LS EP Switch 265-1003 134-1407 LS EP Switch 265-1006 134-1452 LS Pressure Elec. Switch 134-1451 134-1456 LS Pressure Elec. Switch 134-1451 .
CHA FT-817 Brackets are built exclusively by the skilled machinists of Chameleon AntennaTM. They are a military-style pair of precision fabricated aluminum brackets and high quality carrying strap for the popular Yaesu FT-817 series portable QRP transceiver. The brackets have built-in folding legs to tilt the front panel o
LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 CHAPTER 1: INTRODUCTION . STEP 1: Attach the mounting brackets to both sides of the chassis. Insert screws and tighten then with a screwdriver to secure the brackets. FIGURE 2-1. ATTACH THE MOUNTING BRACKETS . 1250-Mbps Fiber with Extended Diagnostics, 850-nm Multimode, 550 m .
Axon DBU User Manual QSC, LLC 2020 614-00062 2 - Product Installation 2.1 - Mounting allowing The DBU has provides flexible mounting options: table too. o Unit Surface Mounting- The DBU is supplied with two "L"-shaped mounting brackets that can be attached to either side of the unit. Once fitted, these brackets can be used to secure
ROUND POST BRACKETS For mounting sign to 2 3/8" O.D. round post. Priced per set, single or back to back brackets, and closure caps are available. RPBZ238 RPBBB832 RPBCDC250 RPBRPCLCAP . 12" JUMBO BRACKETS WING BRACKETS/STRAP OR BOLT TO WALL/POLE RPB800 24" LONG FLAT OR EXTRUDED RPB8
Thermal magnetic switch DIP (Dual In-line Package) Encapsulated switches Switch with delayed opening Double switch bipolar Time switch Timer Electronic limiter Mercury switch Inclination or motion detector Closed switch Switch delay when opening and closing Double limit switch
Asset management in Europe is mainly concentrated in six countries where almost 85% of the asset management activity takes place. The United Kingdom is the largest European asset management market, followed by France, Germany, Switzerland and Italy. Thepresence of large financial centres can explain the market concentration in these countries. The
