Pro/ENGINEER Interface For Unigraphics With Associative .
Pro/ENGINEER Interface for Unigraphics withAssociative Topology Bus (ATB)Pro/ENGINEER Wildfire Series OverviewAsa TrainerDirector, Product ManagementAugust 2009Rev G
Pro/ENGINEER Interface for Unigraphics with ATBPro/ENGINEERImport and ExportParts and AssembliesWildfi 5.0Wildfire50– individual bodies & multi-body structureATB Enabled (for import)E tit SupportEntitySt– Brep and Facet GeometryGRANITE – Datum points and curvesGateway– Layers, Visibility, and ColorsUGOpenLicensingRequires a license and install of UG– Required licenses are: (assemblies),(gateway), and (solid modeling)A separately-licensed module ofPro/ENGINEERUnigraphicsNX4 or NX5Distributed Pro/BATCH SupportRequires Pro/ENGINEER Interface for Unigraphics with ATBUnattended Edition license (CPT-3323-L)2Forward looking information subject to change without notice 2009 PTC
Associative Topology BusAssociativeOne-directional associativity:UG to Pro/ENGINEERPro/ENGINEER Translated ImageModel (TIM)Contains link to Source (UG) objectTopologyMaps geometry IDs from UG to Pro/ENGINEERMaintains geometry IDs as changes are madeBusChecks for changes in the UG (Source) objectUpdatepimportp ggeometryy based on changesg in Source objectjChange Link, Make Independent3Forward looking information subject to change without notice 2009 PTC
New in Pro/ENGINEER Wildfire 40 and PDMLink 914.09.1Heterogeneous Design-In-Context (HDIC)Multi-CAD (Pro/ENGINEER, UG, CATIA V5) support in Windchill PDMLinkRepresent complete mixed CAD product structure in Pro/ENGINEER and Windchill.One WT Part – one source CAD Document – multiple image CAD DocumentsOpen UG CAD Documents in Pro/ENGINEER to create ATB “image” CADDocuments.ATB enables: Check Status, Change Link,M k IIndependent,Makedd t andd ((associative)i ti ) UUpdated ton Pro/ENGINEER TIM (image) modelsRequired Components– Pro/ENGINEER Wildfire 44.00 M060 or later– Pro/ENGINEER Interface for Unigraphics with ATBPart– Unigraphics NX4 or NX5ImageOwner– Windchill Workgroup Manager for Unigraphics– PDMLink 9.1 F000 or later4DerivedSourceForward looking information subject to change without noticeTIM 2009 PTC
New in Pro/ENGINEER Wildfire 505.0Shared MemorySharedMemory Performance & Resource50Limited to GPI-based processors– CATIA V5, CGR, JT, ProductView, UG,Autodesk Inventor, and CADDS5Introduced in Pro/ENGINEERWildfire 4.0 (M080)Benefits– Reduced processing time403020100Import model (65 MB)WildfireWildfi 4.0401000%600%M070Fasterless RAMM080MinutesGB– Reduced memory (RAM) usageB fBefore5NowForward looking information subject to change without notice 2009 PTC
New in Pro/ENGINEER Wildfire 505.0Geometry Export and ImportCables as geometry– Intf3d out cables yes no (default)– Exact representationp6Forward looking information subject to change without notice 2009 PTC
New in Pro/ENGINEER Wildfire 505.0New Import WizardsGreater transparency of dataexchange optionsImproved workflowFiner control of settingsUpdated import log filesXML format (*.xml)Logg Optionsp– Generate on Import Short - receipt Long - full log NoneN– Dynamically generate Info Data Exchange Import LogStatus Indicator7Forward looking information subject to change without notice 2009 PTC
Platform SupportPro/ENGINEER Interface for UG with ATBPlatformsOSProcessorPro/ENGINEERWildfire 4.0(1)Pro/ENGINEERWildfire 5.0(2)32 bit64 bit32 bit64 bitWindows XPPentium/Xeon33(3)33Windows VistaPentium/Xeon33(3)33HP-UXPA8000–3––SUN SolarisUltra SPARC II–3––SUN SolarisAMD & Intel–2–2(1)Pro/ENGINEER Wildfire 4.04 0 Platform Support Matrix(2)Pro/ENGINEER Wildfire 5.0 Platform Support Matrix(3)Support for Windows 64 bit systems introduced in Unigraphics NX5.(4)Legend3 Platform supported by Pro/ENGINEER and processor2 Platform supported by Pro/ENGINEER, but not by processor– Platform not supported by Pro/ENGINEER8Forward looking information subject to change without notice 2009 PTC
Version SupportUnigraphicsg pVersions SupportppPro/ENGINEER Pro/ENGINEER Pro/ENGINEERWildfire 3.0Wildfire 4.0Wildfire 5.09Unigraphics ImportVersions(1)V18 and NXNX3 and NX4,NX5 (M020)NX4 and NX5,NX6 (M030)Unigraphics ExportVersions(2)V18 and NXNX3 and NX4,NX5 (M020)NX4 and NX5,NX6 (M030)(1)Imports Unigraphics versions up compatible with the version of Unigraphicsconnected to Pro/ENGINEER.(2)Export format is defined by version of Unigraphics Pro/ENGINEER is connectedto.(3)TPI 145483 details Unigraphics support in previous releases.Forward looking information subject to change without notice 2009 PTC
For more information contact:Asa TrainerDirector of Product Management,MCAD Interoperability 1.781.370.6258atrainer@ptc.com
Unigraphics Import V18 and NX NX3 and NX4, NX4 and NX5, Versions(1) V18 and NX NX3 and NX4, NX5 (M020) NX4 and NX5, NX6 (M030) Unigraphics Export Versions(2) V18 and NX NX3 and NX4, NX5 (M020) NX4 and NX5, NX6 (M030) (1) Imports Unigraphics versions up compatible w
Immediate start of mold design:With Unigraphics Mold Wizard, you don’t have to wait until the part design is com-plete —you can start the mold design while the part is still being altered. Unigraphics Mold Wizard is fully integrated with Unigraphics, providing complete associativity
Chief Engineer Bhopal Zone, Bhopal Chief Engineer, Leh Chief Engineer (AF) Udhampur Chief Engineer Chennai Zone Chief Engineer (AF) Banglore, Chief Engineer (Navy) Visakhapatnam Chief Engineer A & N Zone, Port Blair Chief Engineer Chandigarh Zone Chief Engineer Bareilly Zone, Chief Engineer Pathankot Zone CWE Bhopal, PIN-900 236, c/o 56 APO
Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original
IndexTerms - Master Model, Parametric Model, NX Unigraphics, NX Open, Customization, Part Files Updation, API (Application Programing Interface). I. INTRODUCTION NX Unigraphics is leading geometric parametric modeling CAD software. It provides a broad set of CAD
Multi-CAD (Pro/ENGINEER, UG, CATIA V5) support in Windchill PDMLink Represent complete mixed CAD product structure in Pro/ENGINEER and Windchill. One WT Part - one source CAD Document - multiple image CAD Documents Open UG CAD Documents in Pro/ENGINEER to create ATB "image" CAD Documents. ATB enables: Check Status, Change Link,
UNIGRAPHICS(NX)-6 Seat UNIGRAPHICS(NX) VIEWER-2 Seat UNIGRAPHICS(NX) CAM-1 Seat MOULD FLOW-1 Seat POWER MILL-4 Seat POWER SHAPE-2 Seat CAMI SOFTWARE-1 Seat AUTO CAD-4 Seat CAP-1Seat WORK STATION FOR DESIGN/MFA-15 PC WORK STATION FOR PROGRAMMING-4 PC Ensures the
New in Pro/ENGINEER Wildfire 5.0. Shared Memory. Limited to GPI-based processors - CATIA V5, CGR, JT, ProductView, UG, Autodesk Inventor, and CADDS5. Introduced in Pro/ENGINEER Wildfire 4.0 (M080) 0 10 20 30 40 50 Minutes GB M070 M080. Shared Memory Performance & Resource . Wildfire 4.0. 11. Pro/ENGINEER. IPC. shared. memory. Pro/ENGINEER.
Scrum for Video Game Development Mike Cohn - background Mountain Goat Software, LLC 1 2 Wednesday, January 23, 2008
