Cordless Combi Drill - Gtech
Cordless Combi DrillModel number: CCD001OPERATING MANUAL4614 Drill manual aw.indd 128/10/2020 16:33
IMPORTANT SAFEGUARDS:IMPORTANT: To avoid serious personal injury, do not attempt to use thisproduct until you read the manual thoroughly and understand it completely. Save this manual and review frequently for safe operation and instructing others who may use this tool. Keep this manual for the safety warnings,precautions, operations, inspections and maintenance information. Storethis manual and the receipt in a safe and dry place for future reference.WARNING: The warnings and precautions discussed in this manual cannotcover all possible conditions and situations that may occur. Please be aware of thepotential hazards, and take all necessary precautions to avoid risk of injuries.Work area: Keep the work area clean and welllit. Cluttered benches and dark areasincrease the risk of accidents. Do not operate the tool in explosiveatmospheres, such as in the presenceof flammable liquids, gases or dust. Thetool could create a spark which mayignite flammable liquids, gases or dust. Keep bystanders, children, and othersaway while operating the tool. Distrac tions could result in improper use andcause injury. Always Keep proper footing andbalance. Proper footing and balanceenable better control of the tool inunexpected situations. Do not use on a ladder or unstablesupports. Stable footing on a solidsurface enables better control of the toolin unexpected situations.Personal safety: Always wear eye protection. Operatorand others in the work area shouldalways wear ANSI-Z87 .1 approvedsafety goggle with side shields. Eyeprotection is used to guard againstflying debris, which may cause severeeye injury. Always hearing protection when usingthe tool. Prolonged exposure to highintensity noise may cause hearing loss. Dress properly. Do not wear looseclothing or jewellery. Keep your hair,clothing, and gloves away from movingparts. Loose clothes, jewellery or longhair can be caught in moving parts. Stay alert. Do not use tool while tired orunder the influence of drugs, alcohol,or medication. A moment of inattentionwhile operating the tool may causeserious injury. Avoid prolonged use. The tool’srepetitive motion and vibration cancause harm to your hands or arms. Theuser can use gloves for extra cushion,take frequent breaks and limit daily useto prevent this issue. This tool vibrates with use. Continuousoperation can be harmful to your handsand arms. Stop using the tool if youfeel tingling or pain. Resume work afterrecovery. Seek medical advice if serioussymptoms occur. Make sure there are no hidden electricalcables, gas pipes, etc. while workingon the work piece. These hazards couldharm the user if damaged while usingthis tool. Wash hands after handling this productor its power cord. They may containchemi cals known to the State ofCalifornia to cause cancer and birthdefects or other reproductive harm.24614 Drill manual aw.indd 228/10/2020 16:33
Electrical safety: The charger’s power plug must matchthe outlet. Never modify the plug or tryto plug the tool into an outlet that doesnot match the plug. Avoid contact with grounded elementssuch as metal tables, pipes, rangesor refrigerators. Contact with theseelements can put you at risk of electricalshock. When operating the tool keep tool awayfrom wet conditions. Wet tools cancause electrical shock. Always inspect electrical cord fordamage before and after use. Adamaged cord can cause electricalshock.Tool use and care: Know this tool. Read this manualcarefully, learn its applications andlimitations, as well as the specificpotential hazards related to this tool. Always have a firm footing and grip onthe tool to counteract any force that maybe enacted during the operation of thetool. Practice safe working practices andensure all relevant legal requirementsare being followed when using this tool. The tool should not be forced, use thecorrect tool for your application. Thecorrect tool will do the job better andsafer at the rate for which the tool isbeing used. Before adjusting, changing accessories,or storing the tool disconnect the toolfrom the battery. This will reduce the riskof injury from the power tool. Check for misalignment or binding ofmoving parts, breakage of parts and anyother condition that may affect the tool’soperation. If damaged, have the toolserviced before using. Many accidents are caused by poorlymaintained tools. Maintain tool withcare. A properly maintained tool willfunction more smoothly and prevent4614 Drill manual aw.indd 3binding, making it easier to use. Do not use the tool for anything otherthan its intended use. Do not use the tool if the trigger doesnot actuate properly. Any tool thatcannot be controlled with the trigger isdangerous and must be repaired. Keep the tool and its handle dry, cleanand free of oil and grease. Always use aclean cloth when cleaning. Never usebrake fluids, gasoline, petroleum-basedproducts, or any strong solvents to cleanyour tool. Never use gasoline or other flammableliquids to clean the tool. Never use thetool in the presence of flammable liquidsor gases. Vapours could ignite by aspark and cause an explosion which willresult in death or serious injury. Do not use the tool as a hammer. Never press the trigger of the tool whenit is not intended to be used. Do not drop or throw the tool.Dropping or throwing the tool canresult in damage that will make the toolunusable or unsafe. If the tool has beendropped or thrown, examine the toolclosely for bent, cracked or brokenparts. STOP and repair before using orserious injury could occur.Battery and charger useand care: Only use batteries that are recommend ed for this tool by the manufacturer. Useof any other battery may cause risk ofinjury or fire. When the battery is not in use, keepit away from metal objects that couldconnect one terminal to another. If theterminals are connected the batterycould cause fire or burns. Keep the battery free of abusivesituations, if a battery is damaged it caneject battery liquid. If you encounter thebattery liquid flush the contact area withwater. If your eye encounters the battery328/10/2020 16:33
liquid flush with water and seek medicalhelp. Battery liquid can cause irritationor burns. Do not store batteries in areas thatcan reach or exceed 105 F. (Such asoutside sheds or metal buildings in thesummer). Only charge the battery with a chargerrecommended by the manufacturer.Use of any other charger may cause riskof injury or fire. Do not use chargers for anything otherthan charging manufacturer recom mended batteries, otherwise electricshock could occur. Do not expose the charger to rain orsnow. Make sure the charger’s cord is inan area where it will not be damaged. Extension cords should not be usedunless necessary. Improper use of anextension cord can result in electricshock. Do not place an object on top of thecharger. This could block ventilationslots and cause excessive internal heat. Do not use the charger if it has beensubjected to a hard blow, has beendropped, or damaged otherwise. Takethe charger to an authorized repaircentre. Do not disassemble the charger. If thecharger needs to be repaired take it toan authorized repair centre. Before cleaning the charger make sureto unplug it from any power source.This will reduce the risk of an electricalshock.Tool service: Only use accessories that are identifiedby the manufacturer for the specific toolmodel. Use of unauthorized parts or failure tofollow maintenance instructions maycreate a risk of injury. Tool service must only be performed bya qualified repair personnel.44614 Drill manual aw.indd 428/10/2020 16:33
Thank you for choosing Gtech“Welcome to the Gtech family. I started Gtech to create sensible, easyto use products that do a great job, and hope you get many years oftrouble-free performance from your new product.”Nick Grey – Inventor, owner of GtechMake a note of your product serial number code for future reference. You can find this onthe underside of the product once the battery has been removed.- - X-XX-XXX XXXXX WWYY 00 0000000About your product215943687101Speed Selector6Variable Speed Switch2Mode Selector7LED Light3 Torque Adjustment8Belt Clip point49Forward/Reverse SwitchMetal Chuck Sleeve5 Chuck Jaws10 Battery (sold separately)54614 Drill manual aw.indd 528/10/2020 16:33
Installing and removing the batteryTo install, simply insert the battery pack.Make sure the latch on the battery snapsin place and battery pack is secured to thetool.To remove, depress the latch.and pull out the battery pack.64614 Drill manual aw.indd 628/10/2020 16:33
Variable speed triggerForward/reverse switchThe variable speed trigger (6) delivers higherspeed with increased trigger pressure andlower speed with decreased trigger pressure.To turn on the tool, depress the trigger. To turnit off, release the trigger and allow the tool tocome to a complete stop.Set the forward/reverse switch (9) in the OFF(Centre lock) position to lock the trigger andhelp prevent accidental starting when not inuse.LED lightPush the forward/reverse switch (9) to the leftof the trigger for forward operation. Push theswitch to the right to reverse the direction.The tool will not run unless the direction ofrotation switch is pushed fully to the left or right.The LED light (7) will illuminate when thetrigger is depressed. It will automatically shutoff the light when the tool is not in use. Thelight will stay on for a few seconds after theproduct is switched off.74614 Drill manual aw.indd 728/10/2020 16:33
Installing and removing drill bitTurn the chuck sleeve (4) counterclockwise (asviewed from the front) to open the chuck jaws.Place the driver/ drill bit into the chuck as faras it goes. Turn the sleeve clockwise to tightenthe chuck.To remove the bit, turn the chuck sleeveclockwise to release.Caution: Do not touch a drill bit just afteruse as it is likely to be very hot.Speed selector12Select low speed (1) forapplications requiringhigher power and torquesuch as screws drivingand drilling in metal.Select high speed (2) forfasting drilling or drivingsuch as drilling in woodor masonry.The speed of the drill can be changed forvarious applications. Press the speed selector(1) button to change to the desired speed.Never change the speed while the tool is running. Doing so may result in seriousdamage to the tool.84614 Drill manual aw.indd 828/10/2020 16:33
Mode selectorDrilling mode (rotation only,torque adjustment not active)Hammer drilling mode (rotationwith hammering, torqueadjustment not active)Screw driving mode (rotation withclutch, torque adjustment active)The tool is equipped with three modes for different applications. Turn the mode selector ring (2) toselect the desired mode. Drill mode should be used for drilling and other heavy-duty applications.Hammer mode should be used for hammer drilling. Drive mode should be used for driving screws.Torque adjustment121Level 1 has the minimumfastening torque andlevel 21 has the maximumtorque.The proper settingdepends on the type ofthe material and the size ofscrew you use.When use screwdriving mode, proper torquesetting helps prevent the possibility of damagingscrew heads, threads and workpiece. Thefastening torque can be adjusted by turning thetorque adjustment ring (3).NOTE: Drive a trial screw into the workpiece to determine which torque level is needed.94614 Drill manual aw.indd 928/10/2020 16:33
Charging the batteryTo charge the battery, line up the slot of thebattery with the slot of the charger and slideinto place. The charger is sold separately.The battery indicator light should turn fromgreen to red when the battery is charging.When the indicator light has turned green thebattery should be fully charged.Battery state of charge indicatorThe state of charge of the battery can betested by pressing the button. Three barsindicates a full charge, two bars a partialcharge, one bar low charge.104614 Drill manual aw.indd 1028/10/2020 16:33
Attaching the belt clipThe belt clip (8) may be installed on either sideof the tool.To install, insert the clip into the groove in thehousing and fasten it with screw.To remove, simple remove the screw and thenremove the belt clip.WARNING:Allow battery to cool down before charging if the battery is hot after continuous use.BATTERYAll batteries wear out over time due to normal wear and tear. Do not attempt to disassemble andrepair the battery, as this could cause serious burns especially when wearing rings and jewellery.For the longest possible battery life, we suggest the following: Remove the battery from the charger once fully charged. Store the battery away from moisture and at a temperature below 80 F. Store the battery with at least a 30% - 50% charge. If a battery has been stored for six months or more, charge the battery as normal.114614 Drill manual aw.indd 1128/10/2020 16:33
MaintenanceAvoid using solvents when cleaning plastic parts. Most plastics are susceptible todamage from various types of commercial solvents and maybe damaged by their use.Use clean cloth to remove dirt, dust, oil, grease, etc.WARNING:Remove the battery from the tool for any inspection, maintenance, and cleaning.TroubleshootingThe product isn’t workingThe battery may have cut out due toexcessive use to prevent overheating. Allowthe product to cool down before re-using.The product is getting hotDuring intensive use, this is normal, but itis advisable to allow the product to cooldown regularly to prevent damage of themotor.The battery heats up during useThis is normal. Allow the battery to cooldown regularly to prevent damage of thebattery.The battery and charger heat upduring chargingThis is normal. It is advisable to removethe battery from the charger once it is fullycharged.124614 Drill manual aw.indd 1228/10/2020 16:33
Product supportIf these initial tips do not solve your problem we please visit our support area where you can findtroubleshooting help including online manuals, FAQs and how-to-videos, as well as genuinespares and replacement parts compatible with your product.Visit: www.gtech.co.uk/supportOnlineLive chat supportsupport@gtech.co.ukHow to VideosTECHNICAL SPECIFICATIONVoltageDC 20V MaxChuck Capacity13mmNo-Load Speed4 0-450 / 0-1, 700 RPMMax Torque530 in-lbChuckKeyless All-Metal134614 Drill manual aw.indd 1328/10/2020 16:33
WARRANTY – REGISTRATIONVisit www.gtech.co.uk/warrantyregistration to register your product to ensure that we have allthe information required to provide you with quick and efficient support.You will need your product’s serial code.X-XX-XXX XXXXX WWYY 00 0000000If you purchased directly from Gtech, yourdetails are already registered and your 2-yearwarranty will start automatically.If you purchased from an authorised Gtechretailer, please register your warranty within3 months. You will need to provide proof ofpurchase to support any claim(s) against yourwarranty.WARRANTY – TERMS AND CONDITIONSIf your product is within its warranty and has a fault that cannot be resolved from thetroubleshooting section or online support, please do the following: Contact our Gtech Customer Care Helpline on UK: 08000 308 794, who will go through anytroubleshooting with you to identify the fault. If your fault can be resolved by a replacement part, this will be sent to you free of charge. Following troubleshooting, if your product needs to be replaced, we will arrange collection ofyour faulty product for inspection, and delivery of a replacement product free of charge.Your product is guaranteed against material or manufacturing faults for 2 years from the date ofpurchase (or the delivery date if this is later) subject to the following terms and conditions:SUMMARYWHAT ISN’T COVEREDThe guarantee becomes effective atthe date of purchase (or the date ofdelivery if this is later). If a productis repaired or replaced during thewarranty period, the warranty periodis not started again.Gtech does not guarantee the repair orreplacement of a product as a result of: You must provide proof of delivery/purchase before any work can becarried out on the product. Withoutthis proof, any work carried out will bechargeable. Please keep your receipt ordelivery note. All work will be carried out by Gtech orits authorised agents. Any parts which are replaced willbecome the property of Gtech. The repair or replacement of yourproduct is under guarantee and will notextend the period of guarantee. The guarantee provides benefits whichare additional to and do not affect yourstatutory rights as a consumer. Normal wear and tear (e.g. batteries) . Use of consumables Accidental damage, faults caused by negligent use or lack of careand maintenance, misuse, neglect, careless operation or handling ofthe product which is not in accordance with operating manual. Use of the product for anything other than the normal domestichousehold purposes. Use of parts and accessories which are not Gtech genuinecomponents. Faulty installation (except where installed by Gtech) If it is modified in any way. Repairs or alterations carried out by parties other than Gtech or itsauthorised agents. Purchasing your product from an unofficial third party (i.e not fromGtech or an official Gtech retailer. If you are in doubt as to what is covered by your guarantee, pleasecall the Gtech Customer Care Helpline on UK: 08000 308 794International orders are subject to a delivery charge for both faulty andnon faulty products.144614 Drill manual aw.indd 1428/10/2020 16:33
Thesymbol indicates that this product iscovered by legislation for waste electrical andelectronic products (2012/19/EU)When the product has reached the end of its life, it andthe Li-Ion battery it contains should not be disposedof with general household waste. The battery shouldbe removed from the product and both should bedisposed of properly at a recognised recycling facility.Call your local council, civic amenity site, or recycling centre for information on the disposal andrecycling of electrical products. Alternatively visitwww.recycle-more.co.uk for advice on recyclingand to find your nearest recycling facilities.FOR HOUSEHOLD USE ONLY154614 Drill manual aw.indd 1528/10/2020 16:33
Notes164614 Drill manual aw.indd 1628/10/2020 16:33
Notes174614 Drill manual aw.indd 1728/10/2020 16:33
Grey Technology LimitedBrindley Road, Warndon, Worcester WR4 9FB4614 Drill manual aw.indd 18CPN4614email: support@gtech.co.uktelephone: 08000 308 794www.gtech.co.uk28/10/2020 16:33
Installing and removing drill bit Speed selector 1 2 4614_Drill_manual_aw.indd 8 28/10/2020 16:33. 9 Mode selector Torque adjustment The tool is equipped with three modes for different applications. Turn the mode selector ring (2) to select the desired mode. Drill mode should be used for drilling and other heavy duty applications. Hammer mode should be used for hammer drilling. Drive mode .
Basketball Drills Greenvale Basketball Club Inc. (A0025777N) Drill 01 - Bull In The Ring Drill 02 - Bump The Cutter Drill 03 - Chill Drill Drill 04 - Close Out Drill Drill 05 - Defensive Shuffle And Pass Drill 06 - Fifty Passes Drill 07 - Five Corner Passing Drill 08 - Five On Four Plus One Drill 09 - Four On Four Recover
Drills 1. Proper Grip 16. Step Over Shuffle w/Bags Drill 2. Warm Up Progression 17. Pocket Awareness Drill 3. Proper Throwing Motion 18. Pocket Awareness w/Ball Drill 4. 5 & 7 Step Drop Drill 19. Rapid Fire Drill 5. Step Over Drill 20. Rout Tree 6. Jump & Throw 7. Kneel & Throw Drill 8. Step Over Throw & Drill 9.
Combi-Plus Installation and Maintenance Manual - 26/10/2010 Page 3 . Dear customer, You have just been choosing a COMBI-PRO or COMBI-PLUS from Hobart and we thank you for trusting our company. Your new COMBI Oven comes from an eco-design approach bringing you ease of use and important savings of water and energy.
FEIN power tool. Page FEIN Power Tools 2–9 History 2–3 Innovation and Quality 4–5 Market Segments 6–7 Repair / Service Center / Warranty 8–9 Cordless 10–17 Cordless Drill/Drivers 14–15 Cordless Hammer Drill/Drivers 15–16 Cordless FEIN M ULTIMASTER 16 Drilling
2ZDF -KCD L47 Solid Drill (Diamond Coated) 2ZDK L62 Flat Bottom Drill 2ZDK HP-1.5D L50,L51 Flat Bottom Drill 2ZDK HP-1.5D-LS L52,L53 Flat Bottom Drill 2ZDK HP-3D L54,L55 Flat Bottom Drill 2ZDK HP-3D-OH L56,L57 Flat Bottom Drill 2ZDK S L60,L61 Flat Bottom Drill 2ZDK S-P L60 Flat Bottom Drill
Can be used to insert all Blum press-in hinges Part no. Knock-in tool ZME.0710 Machine drill bits Part no. Ø5 mm drill bit (RH) M01.ZB05.D2 R Ø5 mm drill bit (LH) M01.ZB05.D3 L Ø8 mm drill bit (LH) M01.ZB08.03 L Ø10 mm drill bit (RH) M01.ZB10.02 R Ø10 mm drill bit (LH) M01.ZB10.03 L Ø20 mm drill bit (RH) M01.ZB20.02 R Ø35 mm drill bit .
2 FIVB Sports Development Department Beach Volleyball Drill-book TABLE OF CONTENTS 22 WARM-UP DRILLS LEVEL PAGES DRILL 1.1 VOLESTE (beginner) 10 DRILL 1.2 SINGLE TWO BALL JUGGLE (beginner) 11 DRILL 1.3 TWO BALL JUGGLE IN PAIRS (beginner) 12 DRILL 1.4 THROW PASS AND CATCH (beginner) 13 DRILL 1.5 SKYBALL AND CATCH (beginner) 14 DRILL 1.6 SERVE AND JOG (beginner) 15
Trustee Joy Harris Jane Gardener Simon Hebditch Trustee Sarah Howell- Davies Jill Batty Cartriona Sutherland treasurer Verity Mosenthal Jenny Thoma Steve Mattingly Trustee Anne Sharpley Lynn Whyte Katy Shaw Trustee Sandra Tait Tina Thorpe Judith Lempriere The position of chair is contested so there will be an election for this post Supporting Statements David Beamish Standing for Chair I .
