SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES
SERIES GVIAWWA C509/C515RESILIENT SEATED GATE VALVES2”-48”509-110 R5DEC 2017
Series GVIResilient Seated Gate Valvesto AWWA C509/C515REPLACEABLE 0-RINGSTriple O-ring sealed with upper twoO-rings replaceable with the valve fullyopen and subjected to the full rated pressure.INTEGRAL THRUST COLLARThe forged shaft features an integralthrust collar with the wear surfaces beingreplaceable thrust bushings instead of theshaft itself.PAGE 2STAINLESS STEEL STEMStainless Steel 304 stems are standard onthe Series GVI gate valve. The corrosionresistant Stainless Steel features hightensile strength for a long trouble freelife. Additional options available tailoredto line media compatibility.NO FLAT GASKETSFormed seals at stuffing box and body tobonnet flanges ensure a good seal andallow easy service in the field.EASY STORAGEBodies feature flat pads on the bottom ofall valves to hold the valve in the uprightposition during storage, preventingdamage from outside elements.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515THRUST BEARINGSReplaceable thrust bearings above andbelow the thrust collar reduce operatingfriction and extend the life of the valveCOPPER ALLOY STEM NUTThe copper alloy stem nut assures therewill be no seizing or galvanic corrosionbetween it and the stem, while alsoproviding a convenient affordable failurepoint.PAGE 3STAINLESS HARDWAREValves come standard with StainlessSteel 304 hardware for long service lifein buried/submerged and harsh serviceconditions. Additional options availablefor corrosive and extreme exposures.FULLY ENCAPSULATED WEDGEStandard Ductile Iron wedge fullyencapsulated over 100% of surfaceensuring a bubble-tight seal in theharshest of service and eliminating wedgecorrosionEPOXY COATINGValve is fully coated with a fusion-bondedepoxy conforming to AWWA C550 intraditional gate valve red. Suitable forburied service or field applied topcoats.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515The VSI AdvantageAll Series GVI Gate Valves come standard with the far superiorDuctile Iron body and gate. The higher strength of Ductile Ironcompared to Cast Iron allows all valves up to 24” to be ratedto a full 250 psi. Additionally, by utilizing heavy duty thickwall castings to AWWA C509 and modern Ductile Iron as thematerial, valves comply with the requirements of both AWWAC509 and C515. VSI’s series GVI valve is UL listed ANSI/NSF61 & 372 for non-rising stem configurations with standardmaterials.SizeAWWAC509AWWAC515Series si14”-24”150psi200psi250psiPAGE 4As standard all Series GVI Gate Valves feature a one-pieceforged shaft with an integral thrust collar supported in bothdirections by replaceable permanently lubricated thrustbearings. The one-piece shaft eliminates the seal damage andleakage that often occurs with gate valves that utilize a splitring collar to retain thrust. Shafts are stainless as standard,with many options available to meet project requirements.All Series GVI Gate Valves utilize triple o-ring sealing to assurezero external leakage and ease of maintenance. The primarylower sealing o-ring rides in a recess on the shaft, facilitatingeasier replacement than o-rings that must be retrieved from arecess in the body.The bronze stem nut provides a convenient failure point inthe case of vandalism or excessive torque input. Over torqueon the valve input will cause the replaceable stem nut to fail,leaving the shaft and valve body unharmed. The low coefficientof friction bronze stem nut also reduces friction, lowering theneeded operating force required.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515ImplementationsThe Gate Valve has long been the standard for lowcost full port isolation applications. The resilientseated variation of the Gate Valve adds thecharacteristic of zero-leak to this list. Operatingtorques in the Gate Valve are the lowest of anyisolation valve relative to size.PAGE 5100% Port AreaAll VSI Resilient Seated Gate Valves come standard witha port area equal to 100 percent of the nominal pipe sizeport area. By including this feature as standard, valveflow coefficients are optimized across the entire line.The smooth full port body allows for minimal flow lossand lower pumping costs. Most standard full size tappingcutters are compatible with this valve design.Resilient Gate FacingThe ductile iron wedge is fully encapsulated withhigh performance EPDM rubber by an advancedvulcanization process. This provides a permanentbond, maintains tight tolerances on the wedge,and provides excellent sealing performance.VSI’s vulcanization process passes the ASTMD429 adhesion test. The resilient nature of theseat allows for drip-tight shut off. Should smallsolids become deposited upon the gate face, tightshut off is still guaranteed.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Sample SpecificationPAGE 6Resilient Wedge Gate Valves for Waterworks Service1.1. This specification covers the design, manufacture, and testing of cast resilient wedge gate valves 2 inch (75 mm) andlarger under service pressure of up to 250 psig (1724 kPa).1.2. Resilient wedge gate valves shall be resilient seated and of the non-rising stem type.2. GOVERNING STANDARDS2.1. All resilient wedge gate valves shall be in full conformance with the design, manufacturing, and testing standards set forthby the American Water Works Association (AWWA) in Standard ANSI/AWWA C509 and ANSI/AWWA C515.2.2. When requested, manufacturer shall provide an Affidavit of Proof of Design Testing in accordance with AWWA.3. CONNECTIONS3.1. Flanged valves shall conform to all standards of ANSI B16.1, Class 125 or Class 250.3.2. Flanged valves’ lay length shall conform to ASME B16.10.3.3. Mechanical joint valves shall conform to all standards of ANSI/AWWA C111/A21.11.4. MARKINGS4.1. Each valve shall be marked with the manufacturer’s name, valve size, body material, and pressure rating cast into the bodyof the valve. Lettering shall be a minimum of 1/2 inch tall and project 1/10 inch from body.4.2. When requested resilient seated gate valves, except buried or submerged valves, shall be equipped with a tag identifyingbody, gate, resilient encapsulation, and stem material in addition to manufacturer’s name, pressure rating, size, date ofmanufacturer, and date of testing.5. DESIGN5.1. Valves shall be equipped with a gate fully encapsulated with a resilient seat bonded per ASTM D429.5.2. Valve stem shall be of the non-rising type an integral thrust collar. Split rings shall not be allowed on resilient seated gatevalves5.3. Valve shall be equipped with a minimum of one seal or o-ring below the thrust collar and two above.5.4. Thrust bushings shall be supplied acting upon the integral thrust collar in both the opening and closing direction.5.5. The valve should have a smooth waterway equal to 100% 5% the nominal pipe size.5.6. Valve sizes 36 inch and larger shall be equipped with an AWWA C509 bypass gate valve sized per AWWA C500 Table 11when required.5.7. Valves 30 inch and larger where the final installation results in the valve stem being more than 22.5 degrees from verticalshall utilize friction reducing tracks and guides.5.8. The valves shall be equipped with a mounting area for operators conforming to Manufacturers Standard Society (MMS) 101or International Organization of Standardization (ISO) 5211 if equipped with a gearbox, pneumatic, hydraulic, or electricactuator. There shall be sufficient clearance to directly mount standardized operators with easily accessible fasteners.5.9. Stem diameter at drive shall be the preferred dimension stated in ISO 5211 Table 4 for pneumatic, hydraulic, or electricactuators.5.10. Valves shall provide a bubble-tight shutoff bi-directionally at rated working pressure.6. MATERIALS6.1. The valve body, gate, and bonnet if equipped shall be constructed of ASTM A536 Ductile Iron.6.2. The valve gate encapsulation shall be made from resilient NBR or EPDM as specified. The gate should be fully encapsulatedwith no voids and holiday tested before and after vulcanization.6.3. The stem shall be made of ASTM A276 type 304 or 316 stainless steel.6.4. Thrust bearings shall be made of permanently lubricated PTFE, or lead free Bronze.6.5. All submerged coatings shall conform to AWWA C550, be holiday free, and have a minimum total dry film thickness of 10mils.6.6. All valves shall have type 304 or 316 stainless steel exterior hardware.7. OPERATORS7.1. All manually operated valves 16 inches and larger shall be equipped with a bevel or spur gear actuator. Operator shouldbe designed to hold the valve in any intermediate position without creeping.7.2. All actuators shall be permanently sealed and suitable for buried service.7.3. All 2 inch square operating nuts shall be epoxy coated or made of corrosion resistant stainless steel.7.4. All actuators equipped with handwheels shall have a maximum rim pull of 50lbs plus 5%.8. MANUFACTURER8.1. Resilient seated wedge gate valves shall be VSI Series GVI as manufactured by Valve Solutions, Inc., Alpharetta, GA USA.8.2. All valves shall be warranted by manufacturer for a minimum of 12 months.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Materials of ConstructionItem Description1Body2Gate3EncapsulationMaterials AvailableStandardDuctile Iron*ASTM A536 65-45-12Cast IronASTM A126 Class BStainless Steel 304ASTM A351 CF8Stainless Steel 316ASTM A351 CF8MCarbon SteelASTM A216 WCBSame as BodyEPDM*14Buna-N (NBR)124Stem Nut131191085Stem766Exterior Hardware543Bronze*ASTM B16Naval BronzeASTM B21 C464Stainless 304*ASTM A276 304Stainless 316ASTM A276 316BronzeASTM B16Stainless 416ASTM A582 41617-4PHASTM A693 Grade 630Super Duplex 2507ASTM A240 2507Stainless 304*ASTM F593/594Stainless 316ASTM F593/594Plated SteelASTM A325 Type 1BronzeC6517Body SealSame as Encapsulation8Upper BodySame as Body9O-RingsSame as EncapsulationPAGE 7Viton (FPM)PTFE*210Bearings1NylonBronzeASTM B16Stainless 316ASTM A276 31611Cap/Mount SealSame as Encapsulation12Dust SealSame as Encapsulation13Cap/MountSame as Body14OperatorSame as BodyAdditional material options available as special order.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Design StandardsSize RangeAvailable as:2”-48” Flanged EndUnderwriters Lab Inc. listedANSI/NSF 61Also classifiedANSI/NSF 372 MH60347 2”-48” MJ End2”-48” Flanged x MJConstructionAWWA C509 and AWWA C515*ASME B16.34API 598CoatingsAWWA C550*ANSI/NSF 61 CompliantConnectionsANSI B16.1 Class 125/ANSI B16.5 Class 150*ANSI B16.1 Class 250/ANSI B16.5 Class 300ANSI/AWWA C111/A21.11 (MJ)*ISO 7005National Pipe Thread (NPT) ANSI/ASME 1.20.1Lay LengthASME B16.10* (ex. MJ)ISO 5752BonnetMSS SP-101*PAGE 8ISO 5211*Standard OptionResistance GuideDesignationEPDMNBRFPMPTFECommon NamesEPDM, EPMCompositionEthylene-propylene-diene MonomerNBR, Buna-NNitrile-butadieneFPM, Viton Hexaflouroproplyene-vinylidenefluoridePTFE, Teflon Polytetrafluoro-ethyleneVSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.comMin/MaxTemperature RangeGeneral PropertiesResistant to:Attached by:-40F/250FExcellent ozone,chemical, andaging resistance.Poor resistance topetroleum-basedfluidsAnimal and vegetableoils, ozone, strong andoxidizing chemicals.Mineral oils andsolvents, aromatichydrocarbons-30F/225FExcellent resistanceto petroleum-basedfluids. Good physicalpropertiesMany hydrocarbons,fats, oils, greases,hydraulic fluids,chemicalsOzone, ketones,esters, aldehydes,chlorinated and nitrohydrocarbons-10F/400FExcellent oil and airresistances both atlow and high temperatures. Very goodchemical resistanceAll aliphatic, aromatic,and halogenatedhydrocarbons, acids,animal and vegetableoilsKetones, low molecular weight estersand nitro containingcompounds-100F/450FExcellent abrasionresistance and chemically inertAcids, harshinorganic and organicchemicals, oils,oxidizing agents, andsolventsMolten alkali metalsand fluorine at hightemperatures
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Pressure/Temperature Ratings-29 0 65 TEMPERATURE, C150 232 40035027.6NPS 2-12 (CL 250)SATURATEDSTEAMNBR20015013.8PTFEEPDMNPS 30-48 (CL 150)100PAGE 9250NPS 2-24 (CL 150)PRESSURE RATING - BARPRESSURE RATING - PSIG - LIQUID, GAS, STEAM3006.950000 -20 100 200 TEMPERATURE, F300 400 In determining field pressure ratings for Series GVI Gate Valves that are constructed of DuctileIron the above chart should be used. Pressure cast on valve represents maximum seatingpressure; maximum hydrostatic pressure is temperature dependent, and may be higher thannominal pressure rating.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Flanged With Direct HandwheelØDHN x ØbPAGE 10ØOD/2ØBCØODASIZEAODBCNbHDTURNSWEIGHT2"764 3/443/410 3/888332-1/2"7 1/275 1/243/411 3/899403"87 1/2643/412 1/2911464"997 1/283/413 7/81014665"10108 1/287/8161017936"10 1/2119 1/287/817 1/212201068"11 1/213 1/211 3/487/821142718510"131614 1/412124 1/2163326012"14191712127 3/8163936414"152118 3/4121 1/830 3/4184554716"1623 1/221 1/4161 1/833 3/4185268318"172522 3/4161 1/436 3/4205895920"1827 1/225201 1/439 3/42064110224"203229 1/2201 3/84620771543Gearbox recommended for valves larger than 14”. Flanged valvesavailable with nut operator as option.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Flanged With Bevel GearHN x ØbPAGE 11ØOD/2ØODØBCASIZEAODBCNbHTURNSWEIGHT2"764 3/443/416 5/823-2-1/2"7 1/275 1/243/417 5/826-3"87 1/2643/418 5/833-4"997 1/283/42041-5"10108 1/287/822 1/851-6"10 1/2119 1/287/823 5/860-8"11 1/213 1/211 3/487/82779-10"131614 1/412130 1/298-12"14191712127 3/8117-14"152118 3/4121 1/833 7/8135-16"1623 1/221 1/4161 1/839 3/4205-18"172522 3/4161 1/442 7/8231-20"1827 1/225201 1/446256-24"203229 1/2201 3/852 1/4382-Apply for larger sizes to 48”. Flanged valves available with nutoperator as option.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Flanged With Spur GearHN x ØbPAGE 12ØOD/2ØODØBCASIZEAODBCNbHTURNSWEIGHT2"764 3/443/416 5/823-2-1/2"7 1/275 1/243/417 5/826-3"87 1/2643/418 5/833-4"997 1/283/42041-5"10108 1/287/822 1/851-6"10 1/2119 1/287/823 5/860-8"11 1/213 1/211 3/487/82779-10"131614 1/412130 1/298-12"14191712127 3/8117-14"152118 3/4121 1/833 7/8135-16"1623 1/221 1/4161 1/839 3/4154-18"172522 3/4161 1/442 7/8231-20"1827 1/225201 1/446256-24"203229 1/2201 3/852 1/4306-Apply for larger sizes to 48”. Flanged valves available with nutoperator as option.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Flanged With Actuator MountØodØbcn x ØdHN x ØbPAGE HT2"764 3/443/49 2/58F105447/168332-1/2"7 1/275 1/243/410 1/29F105447/169403"87 1/2643/411 2/39F105447/1611464"997 1/283/41310F105447/1614665"10108 1/287/81510F105447/1617936"10 1/2119 1/287/816 3/512F105447/16201068"11 1/213 1/211 3/487/819 8/914F1475 1/243/42718510"131614 1/412123 1/216F1475 1/243/43326012"14191712126 3/516F1475 1/243/43936414"152118 3/4121 1/832 2/718F1475 1/243/44554716"1623 1/221 1/4161 1/835 2/518F1475 1/243/45268318"172522 3/4161 1/43920F1475 1/243/45895920"1827 1/225201 1/442 1/220F1475 1/243/464110224"203229 1/2201 3/848 2/520F1475 1/243/4771543Apply for larger sizes to 48”.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Flanged Outside Stem and Yoke (OSY)NPSHN x ØbPAGE 14ØOD/2ØODAØBCSIZEAODBCNbHDTURNSWEIGHT2"764 3/443/411 5/888-2-1/2"7 1/275 1/243/41399-3"87 1/2643/414 3/81011-4"997 1/283/416 3/41114-5"10108 1/287/8201117-6"10 1/2119 1/287/822 5/81320-8"11 1/213 1/211 3/487/8291427-10"131614 1/4121341633-12"14191712139 1/41839-14"152118 3/4121 1/844 1/42045-16"1623 1/221 1/4161 1/849 1/22052-18"172522 3/4161 1/454 1/22458-20"1827 1/225201 1/459 5/82464-24"203229 1/2201 3/8702477-Gearbox recommended for valves larger than 16”.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Mechanical Joint With Direct Nut OperatorHN x ØbPAGE 15ØOD/2ØODAØBCSIZEAODBCNbHTURNSWEIGHT2"8 1/46.134 4/523/410 3/88332-1/2"8 1/46.755 2/523/411 3/89403"8 1/27.696 1/843/412 1/211464"9 1/29.127 1/247/813 7/814666"1011.129 1/267/817 1/2201068"10 1/213.3711 3/467/8212718510"1215.691487/824 1/23326012"1317.9416 1/487/827 3/83936414"1420.3118 3/4107/830 3/44554716"1822.5621127/833 3/45268318"19 1/424.8323 1/4127/836 3/45895920"2027.0825 1/2147/839 3/464110224"2231.5830167/846771543Apply for larger sizes to 48”. Flanged valves available with nutoperator as option.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Mechanical Joint with Bevel GearHN x ØbPAGE 16ØOD/2ØODØBCASIZEAODBCNbHTURNSWEIGHT2"8 1/46.134 4/523/416 5/823-2-1/2"8 1/46.755 2/523/417 5/826-3"8 1/27.696 1/843/418 5/833-4"9 1/29.127 1/247/82041-6"1011.129 1/267/823 5/860-8"10 1/213.3711 3/467/82779-10"1215.691487/830 1/298-12"1317.9416 1/487/827 3/8117-14"1420.3118 3/4107/833 7/8135-16"1822.5621127/839 3/4205-18"19 1/424.8323 1/4127/842 7/8231-20"2027.0825 1/2147/846256-24"2231.5830167/852 1/4382-Apply for larger sizes to 48”. Flanged valves available with nutoperator as option.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Mechanical Joint with Spur GearHN x ØbPAGE 17ØOD/2ØBCØODASIZEAODBCNbHTURNSWEIGHT2"8 1/46.134 4/523/416 5/823-2-1/2"8 1/46.755 2/523/417 5/826-3"8 1/27.696 1/843/418 5/833-4"9 1/29.127 1/247/82041-6"1011.129 1/267/823 5/860-8"10 1/213.3711 3/467/82779-10"1215.691487/830 1/298-12"1317.9416 1/487/827 3/8117-14"1420.3118 3/4107/833 7/8135-16"1822.5621127/839 3/4154-18"19 1/424.8323 1/4127/842 7/8231-20"2027.0825 1/2147/846256-24"2231.5830167/852 1/4306-Apply for larger sizes to 48”. Flanged valves available with nutoperator as option.VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Threaded with Nut OperatorHBPAGE 18B/2ATCSIZEABCHT (1)TURNSWEIGHT1-1/2"6 1/22 15/162 1/29 5/81-1/2" NPT7-2"73 7/16310 3/82" NPT8-2-1/2"7 1/24 7/163 7/811 3/82-1/2" NPT9-3"854 3/812 1/23" NPT11-4"96 1/45 3/813 7/84" NPT14-5"107 9/166 5/8165" NPT17-6"10 1/28 23/327 9/1617 1/26" NPT20-(1) Taper thread per National Pipe Thread (NPT) standard ANSI/ASME B1.20.1VSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515Operating TorqueDirect OperatorBevel GearboxSpur aximum operating torque in ft-lbs.apply for information.PAGE 19SizeSpecial gears available,Gate Encapsulation 0.12Minimum thickness in inches. All rubberencapsulation bonded to ASTM D429.A-Seating Surface ThicknessVSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
Series GVIResilient Seated Gate Valvesto AWWA C509/C515PART NUMBER MATRIXGVI--/-MODELIDENTIFIERSIZE CODE2” - 022.5” - 253” - 03.72” -72OPERATORH-Handwheel*N-2-inch Nut Op.C-ChainwheelB-Barestem, ISO MountOPERATOR ARRANGEMENTM-Direct Stem Mounted*S-Spur GearB-Bevel GearPAGE 20CONNECTIONF -Flanged CL125/150*2 -Flanged CL250/300M-Mechanical Joint to AWWA C111T -FLxMJ TappingN-NPT ThreadedCOATINGS1-Fusion-Bonded Epoxy*2-Tnemec N140, ANSI/NSF 61CONFIGURATIONN-Non-rising stem*O-Outside Stem and Yoke RSHARDWARES-Stainless Steel 304*3-Stainless Steel 316Z-Zinc Plated SteelB-BronzeBODY MATERIALD-Ductile Iron*C-Cast IronBEARING MATERIALP-PTFE*N-NylonB-BronzeS-StainlessGATE MATERIALD-Ductile Iron*C-Cast IronSTEM MATERIALS-Stainless Steel 304*3-Stainless Steel 316B-Bronze Copper Alloy4-Stainless 4166-Stainless 17-4PH2-Super Duplex 2507 (Naval Brass Stem Nut)EXAMPLE:GATE ENCAPSULATIONE-EPDM*B-Buna-N (NBR)V-Viton (FKM)* Standard MaterialGVI06FO-DDSE-BS1/MH-HA 6” flanged OSY gate valve with Ductile Iron body and gate, SS304 shaft, EPDM encapsulation and seals, Bronzebushings, SS304 hardware, fusion-bonded epoxy coatings with direct handwheel operatorVSI Waterworks1155 Alpha Drive, Alpharetta, GA 30004T: 770.740.0800 F: 770.740.8777E: sales@valvesolutions.com
VSI Waterworks LLCtel:1 (770) 740 0800fax:1 (770) 740 8777email: sales@vsiwaterworks.comwww.VSIWaterworks.comAs part of a process of on-going productdevelopment, VSI reserves the right toamend or change specifications withoutprior notice. Published data may be subjectto change. For the latest version, visit ourwebsite at www.vsiwaterworks.com
14”-24” 150psi 200psi 250psi . by the American Water Works Association (AWWA) in Standard ANSI/AWWA C509 and ANSI/AWWA C515. 2.2. When requested, manufacturer shall provide an Affidavit of Proof of Design Testing in accordance with AWWA. . Bronze C651 7 Body Seal Same as Enca
24" c515 flg x flg 24" c515 mj x mj 24" c515 mj x flg flg end: ansi b16.1 class 125 mj end: ansi a21.11 awwa c111 flg end: ansi b16.1 class 125 mj end: ansi a21.11 awwa c111 mj end: ansi a21.11 awwa c111 tap end: ansi b16.1 class 125 24" c515 mj x tap 16 15 14 13 12 11 21 12 11 j l m n 8 8 lbs. chk. by chk date: dwi 24" c515 nrs geared .
us88280731 astm d 4255/d 4255m 2015 us88281030 awwa c 706 1980 us88281031 awwa c 706 1972 us88281034 awwa c 707 1975 us88281036 awwa c 708 1996 us88281041 awwa c 710 2002 us88281044 awwa c 712 2002 us88281059 awwa c 901 1988 us88281060 awwa c 901 1978 us88281092 awwa d 103 1980 us88281099 awwa d 110 2004 us88281110 ansi/awwa d 130 1987 us88281120 ansi/awwa f 102 1991 us88281124 awwa c 104/a21 .
KENNEDY VALVE MODEL KS-FW Kennedy Valve/KS-FW C509 3-1 KENNEDY VALVE AWWA C509 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C509 UL-262/FM-1120/1130 ULC-Underwriters' of Canada Water Working Seat Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA 2"-12" 250 Water Works 250 & 400 500 ULFM 2"-12"
ASME B31.8 Gas Transmission and Distribution Piping Systems ASME B31.9 Building Services Piping ASME B31.11 Slurry Transportation Piping Systems ANSI/AGA Z223.1 National Fuel Gas Code (same as NFPA 54) AWWA C 100 Cast-Iron Pipe, Fittings AWWA C 200 Steel Pipe AWWA C 300 Concrete Pipe AWWA C 400 Asbestos Cement Pipe AWWA C 500 Valves and Hydrants AWWA C 600 Pipe Laying AWWA C 900 PVC Pressure .
ANSI/AWWA C105/A21.5 Polyethylene Encasement ANSI/AWWA C110/A21.10 Ductile-Iron and Gray-Iron Fittings ANSI/AWWA C111/A21.11 Rubber-Gasket Joints ANSI/AWWA C115/A21.15 Flanged Ductile-Iron Pipe ANSI/AWWA C116/A21.16 Fusion-Bonded Epoxy Coatings for Fittings ANSI/AWWA C150/A21.50 Thickness Design ANSI/AWWA C151/A21.51 Ductile-Iron Pipe .
ing procedure. AWWA C201 was revised in 1966, and AWWA C202 was revised in 1964. Both AWWA C201 and AWWA C202 were superseded by AWWA C200-75, approved by the AWWA Board of Directors on Jan. 26, 1975. AWWA C200 includ
AWWA C651 Disinfecting Water Mains ANSI/ AWWA C652 Disinfection of Water Storage Facilities . ANSI/ AWWA C800 Underground Service Line Valves and Fittings . AWWA C901 : AWWA C900 . AWWA C905 . Standard for Polyet
OMIClear Instruction A02/2014 Price List Versions Index 11.Apr.2014 Initial version. Revokes OMIClear Notice 03/2010 – Price List. 1.Feb.2015 Modification of the Price List, including: modification of the structure regarding the Fees on transactions in Futures, Forwards and Swaps .which depend on the monthly traded volume (now including 3 tiers of volume instead of 2). Clarification on the .
