Sale Of Woodshop Tools And Equipment - WordPress

Sale of Woodshop Tools and EquipmentDates of Sale: Saturday, May 31 & Sunday, June 1 – 9:00 AM to 4:00 PMSeller: John GoodroLocation: 213 Sierra Vista Court, Bernalillo, NM 87004Phone: (505) 771-2966 – home; (505) 610-3346 – cellEmail: johngoodro@gmail.comDriving Directions: (from Exit #242 of I-25, about 10 miles north of Albuquerque) Take US 550 west to the mainstreet of Bernalillo, Camino del Pueblo. Turn right, heading north, for about 1/8 mile. On the left you will passStardust Dance Academy (#135) and a residence (#137). Turn left immediately past the residence on anunmarked street. Proceed west about ¼ mile to Sierra Vista Court and turn right. John’s home is on the left atthe end of the cul-du-sac.(All asking prices listed represent approximately 50% of cost new, unless otherwise noted. Cash only, unlessprior arrangements.)Table Saw, Powermatic 10” 3HP, w/ 53” side table, Powermatic fence, fold-down outfeed rollers, with overheaddust collection system, custom drawers under table, on rolling base. 1800Shaper, Woodtek, 3 HP on rolling base w/ sliding table and hold-downs. 1000Band Saw, Delta 14” 1 HP, w/ riser blocks,on rolling base. 350Planer, Woodtek, 15”,on rolling base. 750

Lathe, Powermatic, (older model from a high school),Reeves drive VS, 240v., 2 HP(?), 30” swing, 36” spindle length,includes tool rests and basic accessories. 1000Compressor, Husky, 2 HP, 30 gallon. 200Joiner, Delta 6”, on rolling base. 150Mobile Pedestal Rollers (2),adjustable w/ 5 ball-bearing rollers each(pair) 75Dust Collector, Woodtek, 2 HP, on rolling base. 150Framing Nailer, Porter-Cable, in case. (w/ supply of nails) 150Finish Nailer, Porter-Cable, 2-2/1”, in case. (w/ supply of nails) 125Pin Nailer, Porter-Cable, in case. (w/ supply of nails) 80Brad Nailer, Porter-Cable, in case. (w/ supply of nails) 100Stapler (air), Bostich, ¼”, in case. (w/ supply of staples) 50

Shop Cabinet, custom made,48” W x 72” H x 16” D.Drawers on glides, heavy duty. B.O.Rolling Sheet / Lumber Cart, 48” wide. 150Chop Saw, Makita 10” sliding-bevel. 150Drill Press, Delta 14” floor model, on rolling base. 150.Drum Sander, Delta X5 13” open-end.Some belts included. 700Butt Hinge Mortise Template System,Porter-Cable, in case, never used. 200Power Planer, Makita 3-1/2”, 50Chain Saw, Makita, 16” Electric, UC4000 13amp, 100Radial Arm Saw, Ryobi, 75

.Domino Joiner, Festool DF500Q, includes selection of bits,several bases, supply of dominos,all in two Festainer cases, 600 for total system.Disk Sander, Festool ETS125 5” orbital w/ dustcollection port, in Festainer case, needsreplacement Velcro pad,includes supply of sanding disks, 150Router & Router Table, Porter-Cable 695w/ plunge and standard bases, including table, 125Euro Hinge Mortise Jig, Blum, drillsboth doors and cabinet sides, withaccessory bits, 250Shop Vac, w/ accessories, 25Heater, dual propane heater on 40 gallon tank, 50Scroll Saw, Woodtek 20”, 75

Lathe Turning Tools:- Scraper, 1/2”, round-nose, 1/2” thick (Crown) - 35- Gouge, 3/8”, “Skewchy”, 15-1/2” OAL (Crown) - 20- Scraper, 3/4”, round-nose, 3/16” thick (Crown Pro-PM) - 31- Parting Tool, diamond, 7/32”, (Crown Pro-PM) - 35- Scraper, Heavy-Duty, round-nose, right-hand,1-1/2” x 5/16” thick, 24” OAL, (WWS/Crown) - 55- Bead Tool, ¼”, (WWS/Crown) - 22.50- Bead Tool, 3/8”, (WWS/Crown) - 27.50- Bowl Gouge, 5/8”, 27-1/2” OAL, (WWS/Crown) - 49- Spindle Roughing Gouge, 3/4”, (WWS/Crown) - 35- Parting Tool, diamond, ¼”, (WWS/Crown) - 31.50- Skew, ½”, (WWS/Crown) - 22.50- Skew, 1”, (WWS/Crown) - 32.50- Scraper, 1” square, (WWS/Crown) - 33.50- Scraper, 1” hook, (WWS/Crown) - 35- EZ-Beader, ½”, (Sorby) - 22Chuck, One-way Stronghold w/ 3 jaw sets, 33mm insert, 197(#2 profile jaws; pin jaws; #3 profile jaws)Mega Jumbo Jaws, One-way, - 65Hollowing System, Kelton jig, 110Bowl Coring System, Kelton/McNaughton,1-1/4” post w/4 11” knives and handle, - 125Hollowing Tool, “Termite”, 47

Dovetail Jig, Leigh D4, 400Miter Saw, 20Clamps, large quantity of various types.B.O. for individual clamps or batches.Wood, large quantity of sized cabinet-quality woods, various species and sizes, partially shown in pictures.B.O. for batches only.

Butt Hinge Mortise Template System, Some belts included. 700 Porter-Cable, in case, never used. 200 Power Planer, Makita 3-1/2”, 50 Chain Saw, Makita, 16”