Hand Held Core Drilling Machine FB 200 With STIHL Petrol .
FB200 with FS560Translation of the original operating instruction and spare parts listHand held core drilling machineFB 200with STIHL Petrol-engineFS 560ZN der Bedienungsanleitung:Erstellt am:Erstellt von:Datei:5006661-0003 / 2013Mireille 006661-00-Bedienungsanleitung-E-doc.doc GÖLZ GmbHDommersbach 5153940 Hellenthal-BlumenthalTelefon: (02482) 120 / Telefax: (02482) 12135E-Mail: info@goelz.de / Internet: www.goelz.de- 1-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts listAll rights reserved according to DIN ISO 16016.No part of this document (instruction manual and spare parts list) may be reproduced, adapted,transmitted, transcribed, stored on a data medium or be translated into another language without priorwritten approval of GÖLZ GmbHDommersbach 5153940 Hellenthal-BlumenthalGuaranteeWe reserve the right to amend any information included in this document (manual instruction andspare parts list) at any time and without prior notice. GÖLZ assumes no warranty for these documents. GÖLZ shall not be liable for errors in this document (manual instruction and spare parts list) or for anycollateral or consequential damage in connection with shipment, performance or use of the material.- 2-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts listEC-DECLARATION OF CONFORMITYManufacturer GÖLZ GmbHDommersbach 51, 53940 Hellenthal - BlumenthalTel.: (02482) 120 / Fax: (02482) 12135Declare hereby certifies on its sole responsibility that the following product:FB 200Hand held core drilling machinewithFS560 STIHL Petrol-EngineSerial number:which is explicitly referred to by this declaration meet the following directives:2006/42/ECSafety and health requirement2004/108/ECElectromagnetic compatibility97/68/EC i.d.F. 2002/88/ECExhaust emission directive2000/14/ECNoise emissionmeet the follwing standards:EN 12100-1 / EN 12100-2, EN 12348:2000, EN 13309:2000, EN 61000, DIN EN ISO 3744-1995Documented evidence conforming to the requirements of the directives is kept available for inspectionat the above manufacturer’s address.Blumenthal, den 22.03.2013- 3-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts listContentsPreface . 61.Technical data and accessory . 71.1Technical data of the machine . 71.2Provided accessory . 81.3Optional accessory . 82.Description . 92.1Main parts . 92.2Functional description . 93.Basic safety instructions . 103.1Intended use . 103.2Operating range . 103.3Organisational measures . 103.4Selection and qualification of person . 123.5Safety instructions governing specific operational phases . 123.6Special work related to the maintenance and repair of the machine . 133.7Information about special risks with electrical energy . 143.8Gas, dust, steam, smoke . 143.9Noise . 143.10Illumination . 153.11Oils, greases and other chemical substances . 153.12Transport. 153.13Store . 154.Bringing into service . 164.1Export checking . 164.2Petrol drill motor FS560 . 164.2.1M-Tronic . 164.2.2Fuel . 174.2.3Air filter. 184.2.4Winter operation . 184.2.5Spark plug . 194.2.6Adjusting the throttle cable . 194.5Water supply . 204.5.1With water tank-pressurzied type . 204.5.2Public water mains . 214.7Drill bit . 214.7.1With UNC-Adapter . 224.7.2With 3-hole flange. 22- 4-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts list5.Operation . 235.1Before starting . 235.2Starting the engine . 235.3Operating instructions engine . 255.4Start drilling . 265.5Stop drilling . 265.6Changing the drill bit . 266.Maintenance and care . 276.1Machine . 276.2Drill bit . 276.3Replacing the air filter . 276.4Cleaning the air filter . 286.5Changing the spark plug . 286.6Replacing the starter rope and rewind spring . 296.7Fuel pickup body in tank . 326.8Spark arrestor in muffler and spacer . 326.9Maintenance and care engine . 337.Troubleshooting . 358.Spare parts list . 378.1Using the spare parts list . 378.1.1Safety regulation . 378.1.2Ordering information . 378.1.3Distribution agencies . 388.29.Wearing parts . 39Exploded view and spare parts list . 419.1Drive motor . 439.2Planetary gear. 459.3Tool acceptance . 479.4Motor . 499.4.1Motor - Crankcase, Cylinder . 499.4.2Motor - Rewind starter . 519.4.3Motor - Muffler, Shroud. 539.4.4Motor - Fuel tank . 559.4.5Motor - Spacer flange, Air filter, Filter housing . 579.4.6Motor - Carburetor . 599.4.7Motor - Ignition system . 619.4.8Motor - Clutch, Clutch housing . 639.4.9Motor - Handlebar. 65- 5-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts listPrefaceThis operating manual is designed to familiarize the user with drill rig, hereinafter referred to as themachine, and to use its intended applications.The operating manual contains important information on how to operate the machine safely, properlyand most efficiently. Observing these instructions helps to avoid danger, to reduce repair costs anddowntimes and to increase the reliability and the life of the machine.This operating manual is to be supplemented by the respective national rules and regulations foraccident prevention and environmental protection.The operating manual must always be available wherever the machine is in use.It is to be read and applied by any person in charge of work with or on the machine, such as: Operation including setting up, troubleshooting in the course of work, elimination ofmanufacturing waste, care and disposal of fuels and consumables. Servicing (maintenance, inspection, repair) and/or TransportIn addition to the operating manual and to the mandatory rules and regulations for accidentprevention of the country and place of use of the machine, the recognized technical rules for safe andproper working conditions and procedures are also to be observed.In this manual all the information required for the intended use of the unit is included. If though youhave any specific questions, please refer to your representative, to one of our sales representatives ordirectly to us: GÖLZ GmbHDommersbach 51, 53940 Hellenthal-BlumenthalTelefon: (02482) 120 / Telefax: (02482) 12135E-Mail: info@goelz.de / Internet: www.goelz.deGeneral descriptionWear safety glasses!Wear hard hat!Wear ear muffs!Wear safety boots!Wear safety clothes!Wear dust protection!Wear protective gloves!Never touch!Read owner’s manualbefore first initiation!General danger!Danger exists to cut oneself!- 6-Important advice!Warning! Hot surface!Risk of injuries !With water spraying forbidden!5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts list1.Technical data and accessory1.1Technical data of the machineFB 200TypeKB 300FeedManualWeight24 - 52.9kg - lbs.Length339 - 13.3mm - in.Breadth468 - 18.4mm - in.Height589 - 23.2mm - in.Ø 50 - Ø 200Ø 1.97 - Ø 7.8mm - in.Drilling rangeMotor STIHL TypeFS560Driving mechanismSTIHL - single cylinder - two-stroke-engineCapacity57,1Cylinder bore47 - 1.85mm - in.Piston stroke32,9 - 1.3mm - in.Power2,8 (3,8)kW (PS)Max. operating speed of the spindle100 / 300 / 600Weight with drilling gear20 - 44.1Continuous sound level Lpeq101 dB(A) according to ISO 22868Sound power level Lweq114 dB(A) according to ISO 22868Vibration measurement a3,3 m/s² according to ISO 22867 cm³RPMkg - lbs.Ignition system (with electronic speed limit)PrincipleElectronically controlled magnetoSpark plug (interference-suppressed)NGK BPMR7AElectrode gap0,5 - 0,02mm - in.Fuel systemAir filterNon position sensitive diaphragm carburettorwith integrated fuel pumpPaperFuel tank capacity0,99 (990)CarburettorL (cm³)Mixing ratio with STIHL 1:50 two-stroke engineoil1:50 1 part oil 50 parts petrol- 7-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts listwith other branded two-stroke engineoils classification TC1.2 1.31:25 1 part oil 25 parts petrolProvided accessoryPressure tank 10l with hose3-hole-flange or UNC-adapterTool kitScrewdriverWrenchOptional accessoryKB 300Water tank WB40EPressurized water container 10l for Gardena-couplingCore pliers Ø 50 - Ø 200 mmSharpening plate (drill bits)Fine dust vacuum cleaner, dry vacuum cleaner, wetvacuum cleaner For the item number of accessories, please refer to the current catalogue of GÖLZ If accessories are used which do not correspond to GÖLZ specifications, no liability is assumed forany damage resulting hereof. For details regarding the selection of the right GÖLZ diamond drill bits, please refer to the current GÖLZ catalogue for diamond tools.- 8-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts list2.Description2.1Main parts1) Grasp2) Petrol engine3) Planetary gear4) Emissions deflector5) Handle6) Control holder7) 3-hole-flange8) Water tap9) Water coupler2.2Functional descriptionDue to its compact design and its lightweight construction, the FB200 unit with FS560 offers a prac tice-oriented use in a tight space by one person. The proven STIHL -Drive and the GÖLZ -SystemTechnology ensure highest operational safety and economic efficiency.The machine FB200 with FS560 is used as a freehand drilling machine for drilling up to Ø 200 mm forhouse connection sewer construction. Due to the fact that this unit is operated by the STIHL FS560 gasoline-combustion engine the unitcan be used independently of power supply networks and irrespectively of its position.Above the exhaust pipe of the motor there is an exhaust deflector which, on the one hand, serves as acontact protection to avoid direct skin contact with hot surfaces, and on the other hand, exhaust gasesand cooling air are directed away from the operator.The operating elements of the motor are in a second handgrip - the control holder - of the grasp.On the gear box, either a drill bit flange or an adapter for the different tool sizes can be fitted. Theassembly of the tool is simple and easy. Regarding the flange the drill bit is fixed via a screwconnection, regarding the adapter via a threaded bolt.The safe and easy assembly allows a quick exchange of the tools.Water is supplied either via the supplied pressurized water container or via an external waterconnection. The water hose of the pressurized water container is fitted via a coupling on theconnection of the planetary gear.Thus the water is directly routed via the gearbox into the drill bit and provides a sufficient cooling of thetool and binds the cutting material.Thanks to the sturdy carrying handle the FB200 with FS560 can be put on the side making filling upeasier since the fuel tank cap is in a horizontal position.Due to its compact design, the unit is easy to transport. The machine can be carried by one person.The operator's station is behind the motor so that the handles can be gripped optimally. For working with this unit we recommend GÖLZ diamond tools.- 9-5006661-00BA-E
FB200 with FS560Translation of the original operating instruction and spare parts list3.Basic safety instructionsIn this manual the following terms and symbols are used for particular important information:Note / Important: Contains important information which stands out from the othertext!Attention: Contains instructions which must be strictly observed to preventdamage from the unit and the operator!Important text passages are highlighted in italics or bold or can be found in a grey highlighted textfield.3.1Intended useThe machine has been built in accordance with state-of-the-art standards and the recognized safetyrules. Nevertheless, its use may constitute a risk to life and limb of the user or of third parties, or causedamage to the machine and to other material property.The machine must only be used in technical perfect condition in accordance with its designated useand the instructions set out in the operating manual, and only by safety-conscious persons who arefully aware of the risks involved in operating the machine. Any functional disorders, especially thoseaffecting the safety of the machine, should therefore be rectified immediately!The machine is designed exclusively for drilling in concrete,
Feed Manual Weight 24 - 52.9 kg - lbs. Length 339 - 13.3 mm - in. Breadth 468 - 18.4 mm - in. Height 589 - 23.2 mm - in. Drilling range Ø 50 - Ø 200 Ø 1.97 - Ø 7.8 mm - in. Motor STIHL Type FS560 Driving mechanism STIHL - single cylinder - two-stroke-engine Capacity 57,1 cm³ Cylinder bore 47 - 1.85 mm - in.
Fundamentals of drilling operations; the drilling rig equipment and their functions; drilling terminologies; drilling processes; planning of drilling operations; logistics, role and responsibilities of service companies including drilling contractor; the functions of drilling fluid, casing, cementing and components of a drill string; the different
yr00891 unitec hand held core drill (wet) cap 3” concrete yr00892 husqvarna hand held core drill wet/dry hd6/dm220/225/230 yr00894 husqvarna hand held core drill wet/dry dm220 w/port for vac hookup yr00895 diamond products hand held core drill (wet) dk12 - 6” cap . yr00896 diamond products hand held core drill wet/dry cb500-hh
Casing drilling, otherwise known as drilling with casing (DwC) or casing while drilling (CwD) is an alternative drilling technique to the conventional drilling method. Casing drilling involves the simultaneous drilling and casing of well with a (active-standard) casing string. It is mandatory to note that casing is the same grade and weight as in
This milling and drilling machine is a light-duty multipurpose machine designed for turning, drilling, and milling metal and other materials. It can be widely applied for single part and mass production in all kinds of small-sized enterprises and repair industries. Milling and Drilling Machine OWNER’S MANUAL Milling and Drilling Machine
Drilling Productivity Report (DPR), September 2020. The drilling process is increasingly managed usingmass production operations , such as pad drilling, cube drilling, and multilateral drilling, to achieve higher cost efficiency in both the physical and contractual management of heavy-duty and fully automated drilling rigs.
Lifting Capacity of Drilling Fluids, Pressure losses in the Circulating System and ECD Functions of the Drilling Fluids, Impact of Hydraulic on the Drilling Optimization Parameters affecting on the Drilling Penetrations Drilling Fluid Properties, Functions of Drilling Fluid Mud Properties and Problems related to Mud Properties
Geothermal Well Drilling, the differences between Geothermal Drilling and Oil and Gas Drilling. The challenges of drilling and producing hot, volcanic resources from fractured formations. By Louis E. Capuano, Jr. November 21, 2014
To investigate the benefit of directional drilling in a specific drilling program Devico will, free of charge, provide a drilling plan to potential clients. The plan will estimate the total amount of standard and directional drilling required, and the meters saved compared to drilling all targets from surface. Inclination and
