John Deere 9530T - Nebraska Tractor Test Laboratory

2y ago
16 Views
2 Downloads
210.92 KB
6 Pages
Last View : 28d ago
Last Download : 3m ago
Upload by : Kamden Hassan
Transcription

NEBRASKA OECD TRACTOR TEST 2134–SUMMARY 1004JOHN DEERE 9570RT DIESEL18 SPEEDLocation of tests: Nebraska Tractor TestLaboratory, University of Nebraska, Lincoln,Nebraska 68583-0832POWER TAKE-OFF onHp.hr/gal Gal/hr(kW.h/l)(l/h)Dates of tests: October 27 to November 13, 2015Mean AtmosphericConditionsManufacturer: John Deere Tractor Works, 3500East Donald St., P.O. Box 270, Waterloo Ia,50704-0270MAXIMUM POWER AND FUEL .27(266.42)1701Rated Engine Speed—(PTO speed—1109 rpm)19.310.44015.910.82 Fuel used during active exhaust(73.11)(0.268)(3.13) (3.11) regeneration-0.85 gal (3.20 l)(see note 1, p.2)Standard Power Take-off Speed(1000 rpm)20.330.40917.110.70(76.94)(0.249)(3.37) (2.66)Maximum Power (1 hour)20.020.39317.840.79(75.79)(0.239)(3.52) (3.00)VARYING POWER AND FUEL 68)15.91 0.82(3.13) (3.11)Air 81)15.17 0.76(2.99) (2.87)73 F (23 C)197.79(147.49)212314.37(54.41)0.509(0.310)13.76 0.53(2.71) (1.99)Relative 1.48 0.48(2.26) 38 0.28(1.45) 284)0.12 0.17(0.02) (0.66)28.14" Hg (95.30 kPa)ENGINE: Make Cummins Diesel Type sixcylinder vertical with turbocharger, air to airaftercooler and D.E.F.(diesel exhaust fluid) exhausttreatment Serial No. *79809376* Crankshaftlengthwise Rated engine speed 2100 Bore andstroke 5.394" x 6.654" (137.0 mm x 169.0 mm)Compression ratio 17.2 to 1 Displacement 912 cuin (14948 ml) Starting system 12 volt Lubricationpressure Air cleaner two paper elements andaspirator Oil filter one full flow cartridge Oilcooler engine coolant heat exchanger for crankcaseoil, radiator for transmission/hydraulic oil alsofeeding rear axle Fuel filter two paper cartridgesFuel cooler radiator for returned fuel ExhaustDOC (diesel oxidation catalyst), SCR (selectivecatalyst reduction) and regenerative DPF (dieselparticulate filter) integrated within a vertical mufflerCooling medium temperature control thermostatand variable speed fanMaximumTorque - 1160 lb.-ft. (1573 Nm) at 1552 rpmMaximum Torque Rise -51.0%Torque rise at 1682 engine rpm - 44%Power increase at 1701 rpm - 16.3%DRAWBAR PERFORMANCE (Unballasted)FUEL CONSUMPTION uel ConsumptionD.E.F.Temp. F ( C)lb/hp.hrHp.hr/gal Consumption cool- Air(kg/kW.h)(kW.h/l)lb/hp.hringdry(kg/kW.h)med bulbDrawbarpulllbs(kN)Speedmph(km/h)441.46 32641(329.20) (145.19)5.07(8.16)345.92 24453(257.95) (108.77)75% of Pull at Maximum Power—7th Gear - Manual 3) (0.015) (97)57(14)234.78 16295(175.07) (72.48)50% of Pull at Maximum Power—7th Gear- Manual 0) (0.019) (96)5828.57(14) (96.75)Maximum Power—7th Gear- Manual mode20992.10.43716.030.017(0.266)(3.16) (0.011)208(98)CONSUMABLE Fluids, OIL and TIME: FuelNo. 2 Diesel Specific gravity converted to 60 /60 F(15 /15 C) 0.8412 Fuel weight 7.004 lbs/gal (0.839kg/l) Diesel Exhaust Fluid (DEF) 32% aqueousurea solution DEF weight 9.071 lbs/gal(1. 087 kg/l)Oil SAE 10W-30 API service classification CJ-4Transmission, hydraulic and final drive lubricantJohn Deere Hy-Gard fluid Total time engine wasoperated: 33.0 hoursBarom.inchHg(kPa)5128.70(11) (97.19)28.60(96.85)75% of Pull at Reduced Engine Speed— 5.3 mph (8.6 km/h)-Auto mode344.97 244515.2915851.20.40417.360.0272065728.59(257.24) (108.76) (8.51)(0.245)(3.42) (0.016)(97) (14) (96.82)50% of Pull at Reduced Engine Speed— 5.5 mph (8.8 km/h)-Auto mode234.80 161735.4414670.50.43216.230.0301935828.56(175.09) (71.94) (8.75)(0.263)(3.20) (0.018) (89) (15) (96.72)ENGINE OPERATING PARAMETERS: Fuelrate: Stationary PTO operation (395 engine hp)130.3 - 141.0 lb/h (59.1 - 64.0 kg/h), Drawbaroperations (470 engine hp) 155.1 - 167.2 lb/h (70.475.8 kg/h), (495 engine hp) 165.3-178.4 lb/h (75.080.9 kg/h), (520 engine hp) 173.5-187.6 lb/h (78.785.1 kg/h), (545 engine hp) 180.7-194.8 lb/h (82.088.4 kg/h), (570 engine hp) 189.0 - 204.1 lb/h (85.792.6 kg/h) High idle: 2215 - 2265 rpm (2125 - 2175rpm with PTO engaged) Turbo boost: (570 enginehp) nominal 26.8 - 29.7 psi (185 - 205 kPa) asmeasured 28.0 psi (195 kPa)CHASSIS: Type tracklayer-rubber tracked SerialNo.*1RW9570RJFP907080* Track width 107.4"(2728 mm) Length of track on ground 111.0" (2819mm) Hydraulic control system direct engine driveTransmission selective gear fixed ratio with fullrange operator controlled power shift Nominaltravel speeds mph (km/h) first 2.51 (4.04) second3.09 (4.97) third 3.41 (5.49) fourth 3.82 (6.14) fifth4.20 (6.76) sixth 4.70 (7.56) seventh 5.20 (8.36)

DRAWBAR PERFORMANCE(Unballasted at 2100 rpm, Manual Mode)MAXIMUM POWER IN SELECTED ankshaftspeedrpmSlip%Fuel ConsumptionD.E.FTemp. F( C)lb/hp.hr Hp.hr/gal Consumption cool- Air(kg/kW.h)(kW.h/l)lb/hp.hringdry(kg/kW.h)med bulbBarom.inchHg(kPa)300.91510052.22(224.39) (226.88) (3.56)211812.31st 1)28.73(97.29)336.15433552.91(250.67) (192.85) (4.68)21005.72nd 2)28.71(97.22)366.42425573.23(273.24) (189.30) (5.20)20995.23rd 2)28.71(97.22)390.56401533.65(291.24) (178.61) (5.87)21004.24th 3)28.72(97.26)412.68382854.05(307.73) (170.30) (6.51)21003.55th 0)28.54(96.65)436.55359114.56(325.53) (159.74) (7.34)21002.86th 28.70(97.19)441.46326415.07(329.20) (145.19) (8.16)20992.17th Gear0.437(0.266)440.79291975.66(328.69) (129.87) (9.11)21001.68th 0)28.71(97.22)440.40262356.30(328.40) (116.70) (10.13)21001.39th 1)28.69(97.16)440.50235567.01(328.48) (104.78) (11.28)21001.010th 2)28.69(97.16)437.87(326.52)20990.811th 2)28.67(97.09)0.612th 2)28.66(97.05)438.19(326.76)211507.76(94.08) (12.49)190098.65(84.56) (13.91)2099eighth 5.77 (9.29) ninth 6.39 (10.29) tenth 7.10(11.43) eleventh 7.85 (12.63) twelfth 8.73 (14.05)thirteenth 9.66 (15.55) fourteenth 10.75 (17.30)fifteenth 13.29 (21.39) sixteenth 16.35 (26.31)seventeenth 20.07 (32.30) eighteenth 24.72 (39.77)reverse 2.51 (4.04), 3.41 (5.49), 3.82 (6.14), 5.20(8.36), 5.77 (9.29), 7.85 (12.63) Clutch wet multipledisc hydraulically actuated by foot pedal Brakeswet multiple disc hydraulically actuated by footpedal Steering electro-hydraulic differentialsteering controlled by steering wheel Power takeoff 1000 rpm at 1895 engine rpm Unladen tractormass 47500 lb (21546 kg)REPAIRS AND ADJUSTMENTS: No repairsor adjustments.NOTE 1. The manufacturer declares that theaverage time between active regenerations is 60hours.NOTE 2. The 9570RT engine has an electroniccontrol system which provides a vehicle protectionsystem to avoid overloading the drive train. Thissystem provides five different engine power levels.At 2100 rpm the engine produces up to 470 hpwhen the transmission is in forward gears 1 and2. At 2100 rpm the engine produces 495 hp whenthe transmission is in gear 3. The engine produces520 hp when the transmission is in gear 4. Theengine produces 545 hp when the transmission isin gear 5. The engine produces 570 hp at 2100rpm for all other gears.REMARKS: All test results were determinedfrom observed data obtained in accordance withofficial OECD, SAE and Nebraska test procedures.The performance figures on this summary weretaken from a test conducted under the OECDCode 2 test procedure.We, the undersigned, certify that this is a trueand correct report of official Tractor Test No.2134, Nebraska Summary 1004, January 19, 2016TRACTOR SOUND LEVEL WITH CABAt no load in 6th gearTransport speed - no load - 18th gearBystander in 18th gearTIRES, BALLAST AND WEIGHTTrack widthBallast - Cast iron(front)- Cast iron(idlers)- Cast iron (side)Height of DrawbarStatic Weight with operatorWeight with OperatordB(A)73.275.089.9With Ballast36.0 in (915 mm)3260 lb (1479 kg)340 lb (154 kg)2725 lb (1236 kg)21.0 in (535 mm)54000 lb(24494 kg)Without Ballast36.0 in (915 mm)NoneNoneNone21.0 in (535 mm)47675 lb(21625 kg)taticRoger M. HoyDirectorM.F. KocherP.J. JasaS.K. PitlaBoard of Tractor Test Engineers

DRAWBAR PERFORMANCEUNBALLASTED - AUTO MODE(Loads based on 2100 engine rpm manual mode performance runs)DRAWBAR POWER AT SELECTED TRAVEL rankshaftspeedrpmSlip%Fuel Consumptionlb/hp.hr Hp.hr/gal(kg/kW.h) (kW.h/l)D.E.F.Temp. F ( C)Consumption kPa)390.21395383.70(290.98) (175.87) (5.95)15623.9 mph (6.2 54(12)28.72(97.26)413.66380274.08(308.47) (169.15) (6.57)17134.2 mph (6.8 51(10)28.53(96.61)438.21357934.59(326.77) (159.21) (7.39)17234.7 mph (7.6 55(13)28.63(96.95)440.74323185.11(328.66) (143.76) (8.22)17195.2 mph (8.4 52(11)28.70(97.19)439.52292815.63(327.75) (130.25) (9.06)16965.7 mph (9.2 50(10)28.70(97.19)440.27263646.26(328.31) (117.27) (10.07)17006.3 mph (10.2 53(12)28.69(97.16)439.46234967.01(327.71) (104.51) (11.28)17087.1 mph (11.4 54(12)28.68(97.12)438.50(326.99)211567.77(94.10) (12.50)17077.8 mph (12.6 54(12)28.66(97.05)437.87(326.52)190048.64(84.53) (13.90)17048.7 mph (14.0 54(12)28.65(97.02)

DRAWBAR PERFORMANCE(Unballasted at 1750 RPM, Manual mode)MAXIMUM POWER IN SELECTED ankshaftspeedrpmSlip%Fuel ConsumptionD.E.FTemp. F( C)lb/hp.hr Hp.hr/gal Consumption cool- Air(kg/kW.h)(kW.h/l)lb/hp.hringdry(kg/kW.h)med bulbBarom.inchHg(kPa)301.96511502.22(225.17) (227.53) (3.56)211812.31st 1)28.74(97.33)348.56472552.77(259.92) (210.20) (4.46)20437.72nd 1)28.73(97.29)376.18455353.10(280.52) (202.55) (4.99)20547.03rd 2)28.71(97.22)408.50441413.48(304.62) (196.35) (5.59)20335.84th 2)28.71(97.22)440.83434313.81(328.73) (193.19) (6.13)20195.55th 2)28.71(97.22)471.29425704.16(351.44) (189.36) (6.69)19615.26th 3)28.71(97.22)486.50415304.40(362.78) (184.73) (7.07)18674.87th 3)28.71(97.22)491.26400734.60(366.33) (178.25) (7.40)17504.28th 1)28.52(96.58)494.67359845.16(368.87) (160.06) (8.30)17493.09th )28.55(96.68)498.19323225.78(371.50) (143.77) (9.30)17502.110th )28.58(96.78)498.47290966.43(371.71) (129.42) (10.34)17501.611th )28.58(96.78)500.05261737.17(372.88) (116.42) (11.53)17501.312th )28.58(96.78)492.88232387.95(367.54) (103.37) (12.79)17501.013th )28.56(96.72)Lugging ability in 11th gearCrankshaft speed rpm 727269291663089430225(kN)(93.86) (107.27) (117.06) (121.30) (129.74) (137.42) (134.45)Increase in pull 31482.42413.44(kW)(325.78) (354.01) (366.20) (369.02) (372.34) (359.74) ip 6.71)4.04(6.50)1.4

DRAWBAR PERFORMANCE(Ballasted at 1750 RPM, Manual mode)MAXIMUM POWER IN SELECTED ankshaftspeedrpmSlip%Fuel ConsumptionD.E.FTemp. F( C)lb/hp.hr Hp.hr/gal Consumption cool- Air(kg/kW.h)(kW.h/l)lb/hp.hringdry(kg/kW.h)med bulbBarom.inchHg(kPa)335.66585252.15(250.30) (260.33) (3.46)203511.61st 4)28.59(96.82)374.08551872.55(278.95) (245.48) (4.10)18918.82nd 5)28.59(96.82)409.21540232.85(305.14) (240.31) (4.58)18947.93rd 6)28.60(96.85)425.54500013.20(317.32) (222.42) (5.14)19007.64th Gear0.453(0.275)15.47(3.05)0.019(0.012)21281(100) (27)28.54(96.65)450.83495163.42(336.18) (220.26) (5.50)18437.45th Gear0.445(0.271)15.73(3.10)0.018(0.011)21282(100) (28)28.55(96.68)473.32485923.66(352.95) (216.15) (5.88)17507.16th Gear0.442(0.269)15.86(3.13)0.017(0.011)21481(101) (27)28.56(96.72)491.07446014.13(366.19) (198.40) (6.64)17504.67th Gear0.427(0.260)16.41(3.23)0.016(0.010)21379(101) (26)28.57(96.75)498.58402254.65(371.79) (178.93) (7.48)17503.48th Gear0.421(0.256)16.62(3.27)0.017(0.010)21480(101) (27)28.56(96.72)496.96358215.20(370.58) (159.34) (8.37)17502.49th 4)28.59(96.82)500.27323035.81(373.05) (143.69) (9.34)17501.910th Gear0.419(0.255)16.71(3.29)0.016(0.010)21276(100) (24)28.59(96.82)500.49291306.45(373.21) (129.57) (10.37)17501.511th Gear0.419(0.255)16.74(3.30)0.016(0.009)21277(100) (25)28.58(96.78)501.16261637.19(373.72) (116.38) (11.56)17501.212th 5)28.58(96.78)493.05232047.97(367.67) (103.22) (12.83)17491.013th Gear0.424(0.258)16.54(3.26)0.016(0.010)21278(100) (25)28.58(96.78)

HYDRAULIC PERFORMANCECATEGORY: 4N/4Quick Attach: YesOECD Static testMaximum force exerted through whole range:i) Sustained pressure at compensator cutoff:ii) Pump delivery rate at minimum pressureand rated engine speed:Combined flow:iii)Pump delivery rate at maximumhydraulic power:Delivery pressure:Power:i) Sustained pressure at compensator cutoff:ii) Pump delivery rate at minimum pressureand rated engine speed:iii)Pump delivery rate at maximumhydraulic power:Delivery pressure:Power:Category 4NCategory 4Nlift cylinders15410 lbs(68.5 kN) (1 x 90 mm and 1x100 mm)20679 lbs(92.0 kN) (2 x 110 mm)Category 415346 lbs(68.3 kN) (1 x 90 mm and 1x100 mm)20526 lbs(91.3 kN) (2 x 110 mm)Base pumpTandem pumpthree outlet sets combined2959 psi (204 bar)2910 psi (201 bar)61.2 GPM (231.6 l/min) 56.8 GPM (214.9 l/min)118.0 GPM (446.5 l/min)61.2 GPM (231.8 l/min) 57.2 GPM (216.3 l/min)2614 psi (180 bar)2458 psi (169 bar)93.4 HP (69.6 kW) 82.0 HP (61.1 kW)single outlet set3/4" couplers1/2" couplers2856 psi (197 bar)2957 psi (204 bar)43.1 GPM (163.2 l/min) 37.0 GPM (140.2 l/min)42.5 GPM (160.9 l/min) 35.0 GPM (132.6 l/min)2226 psi (153 bar)2284 psi (157 bar)55.2 HP (41.2 kW) 46.7 HP (34.8 kW)ABCDEFGHIJKL*L'MNOPQR*L' toHITCHJOHN DEERE 9570RT DIESELInstitute of Agriculture and Natural ResourcesUniversity of Nebraska–LincolnCategory 26640.3102340.1101850.2127550.41280Quick Attach endsDIMENSIONS AS TESTED—NO LOAD

Location of tests: Nebraska Tractor Test Laboratory, University of Nebraska, Lincoln, Nebraska 68583-0832 Dates of tests: October 27 to November 13, 2015 Manufacturer: John Deere Tractor

Related Documents:

JOHN DEERE JOHN DEERE Ltr. A 2,5 3.152 D 3 Zyl. 24-30 kW (23-40 PS) JD301 Tractor 135 Power Unit 152 Power Unit 300B BackHoe 300B Loader 301A Loader 301A Tractor 310 Tractor 350 C Tractor 350B Tractor 510 Tractor 820 Tractor 830 Tractor 920 Tractor 1020 Tractor 01/56. 01-45400-01 bo RE524747

JOHN DEERE JOHN DEERE Ltr. A 2,5 3.152 D 3 Zyl. 24-30 kW (23-40 PS) JD301 Tractor 135 Power Unit 152 Power Unit 300B BackHoe 300B Loader 301A Loader 301A Tractor 310 Tractor 350 C Tractor 350B Tractor 510 Tractor 820 Tractor 830 Tractor 920 Tractor 1020 Tractor 01/56. 01-45400-01 bo RE524747 02-45400-01 RE38848 61-45400-10 R98460 115 % 71-41784 .

JOHN DEERE JOHN DEERE A Code A Code A Code A Code A Code A Code A Code A Code JOHN DEERE 0–9 . 1830 Tractor 2120 Tractor 2250 Windrower 2320 Windrower 2510 Tractor 6000 Sprayer 01/66. A31471-01 bo RE524748 D31471-00 RE526668 H07466-00 R515274 119

John Deere L with Sickle Mower JDM 249 John Deere LA with Leaf Spring Cultivator Die Cast implements - 1:16 sCale JOHN DEERE Die Cast traCtors & implements - 1:16 sCale JDM 247 John Deere #55 3-Bottom Plow with Clutch on Rubber Wheels JDM 233 John Deere M with 2-Row Planter JDM 252 John Deere M Gas Wide Front JDM 255 John Deere 62 with Plow JDM 258

make Kubota Yanmar Yanmar Yanmar Yanmar Yanmar Yanmar John Deere John Deere John Deere John Deere John Deere John Deere John Deere Cummins Cummins Cummins Cummins Cummins Cummins Cummins Cummins Caterpillar Caterpillar . Weight (working) kg 400 535 555 586 795 1296 1296 1830 1830 1830 1830

Deere tractors and non-Deere implements Deere implements behind non-Deere tractors AMS applications interfacing with Deere and non-Deere products Compatibility check and diagnostic tools for machine combina-tions of John Deere and non-Deere machines. To meet ISO11783 standard, ISOBUS is the first worldwide standard for

John Deere 6330 Prem 105 to 120 HP with IPM, 3653 hours, John Deere H310 Loader with bucket. SU#62987 John Deere 6820 Prem 135 HP, 8350 Hours, John Deere Loader. SU#61924 John Deere 6630 130 HP plus IPM, 6250 Hours, 3Scvs, Hydraulic trailer brakes Pearson Loader. SU#62985 John Deere 6530 Std 120 HP, 6585

3 P a g e www.ncerthelp.com (Visit for all ncert solutions in text and videos, CBSE syllabus, note and many more) (b) 1 pound 0.4537 kg (c) 1 amu 1.66 x10-23 kg 3 Volume