SOLDERING, BRAZING AND HEATING TORCHES FUEL CELLS
ABLEFORBLUEJET
IDEAL FOR:HEAT SHRINK, HEATING METALSFOR BENDING, HOSPITALITY/COOKING, JEWELLERY & ART,LIGHTING BBQ GRILLS & FIRE PITS,LIGHTING PILOT LIGHTS, METALREPAIRS, SOLDERING CIRCUITRY,TIMBER FINISHINGANTI-FLARING FUEL REGULATORMAX TEMP 1366 FLAME TYPE: CONCENTRATED FLAMEERGONOMIC HANDLEDESIGN FOR EASE OF USEP/N: 308410SUITABLEFORUP TO 1366 C PROPANESTAINLESS STEEL BURNERTUBES WITH BRASS VALVEHEATCONSUMPTION9839 (BTU/hr) PENCIL FLAME TORCHFEATURES:IDEAL FOR:MANUAL IGNITIONHEAT SHRINK, HOSPITALITY/COOKING, LIGHTING BBQ GRILLS &FIRE PITS, LIGHTING PILOT LIGHTS,SOLDERING CIRCUITRY, TIMBERFINISHINGADJUSTABLE FLAME CONTROLANTI-FLARING FUEL REGULATORMAX TEMP 1322 P/N: 308411MAXGASSWIVEL TORCH,CONCENTRATED FLAMEFEATURES:AUTO IGNITION –INSTANT START IGNITORSFLAME TYPE: PENCIL FLAMEERGONOMIC HANDLE DESIGNFOR EASE OF USEPROPANEEASY TO OPERATE & LIGHT WEIGHTUP TO 1322 C SUITABLEFORQUALITY BRASS CONSTRUCTIONHEATCONSUMPTION7568 (BTU/hr) CONCENTRATED FLAMEFEATURES:IDEAL FOR:AUTO IGNITIONHEAT SHRINK, HOSPITALITY/COOKING, LIGHTING BBQ GRILLS &FIRE PITS, SOLDERING CIRCUITRYADJUSTABLE FLAME CONTROLANTI-FLAME FLARING DESIGNMAX TEMP 1244 P/N: 308413FLAME TYPE: CONCENTRATED FLAMEERGONOMIC HANDLE DESIGN FOR EASE OF USEEASY TO OPERATE & LIGHT WEIGHTSUITABLEFORUP TO 1244 C BUTANEIDEAL FOR HOSPITALITY/COOKINGHEATCONSUMPTION3801 (BTU/hr) CIGWELD.COM.AU
BLUEJETTORCH & FUEL COMBOSSUPER CYCLONE FLAME &MAXGAS FUEL CELL COMBOP/N: 308400UP TO 1372 C HEATCONSUMPTION12196.5 (BTU/hr) CYCLONE FLAME &MAXGAS FUEL CELL COMBOP/N: 308401UP TO 1310 C HEATCONSUMPTION5866.22 (BTU/hr) TRIPLE-POINT FLAME& PROPANE FUEL CELL COMBOP/N: 308402UP TO 1176 C HEATCONSUMPTION3468 (BTU/hr)
SWIVEL TORCH,CONCENTRATED FLAME &MAXGAS FUEL CELL COMBOP/N: 308403UP TO 1366 C HEATCONSUMPTION9839 (BTU/hr) PENCIL FLAME TORCH &PROPANE FUEL CELL COMBOP/N: 308404UP TO 1322 C HEATCONSUMPTION7568 (BTU/hr) CONCENTRATED FLAME &BUTANE FUEL CELL COMBOP/N: 308406UP TO 1244 C HEATCONSUMPTION3801 (BTU/hr) CIGWELD.COM.AU
BLUEJETTORCH FLAME TYPE, TORCH & FUEL CELLTORCH FLAME TYPE, TORCH & FUEL CELLSUPER CYCLONEFLAMECYCLONE FLAMETRIPLE-POINTFLAMEPENCIL FLAME
SWIVEL TORCH,CONCENTRATED FLAMECONCENTRATEDFLAMECIGWELD.COM.AU
ORDERING INFORMATIONBLUEJETFUEL CELLSBLUEJETTORCHesBLUEJET TORCH &Fuel COMBOSMAXGAS SINGLE FUEL CELL308979JET407 SUPER CYCLONE FLAME308407JET407 SUPER CYCLONE FLAME &MAXGAS FUEL CELL308400MAXGAS FUEL CELL: 3-PACK308980JET408 CYCLONE FLAME308408PROPANE SINGLE FUEL CELL308981JET409 TRIPLE-POINT FLAME308409JET408 CYCLONE FLAME &MAXGAS FUEL CELL308401BUTANE FUEL CELL: 4-PACK308984JET410 SWIVEL TORCH,CONCENTRATED FLAME308410JET409 TRIPLE-POINT FLAME &PROPANE FUEL CELL308402JET411 PENCIL FLAME TORCH308411308403JET413 CONCENTRATED FLAME308413JET410 SWIVEL TORCH,CONCENTRATED FLAME &MAXGAS FUEL CELLJET411 PENCIL FLAME TORCH &PROPANE FUEL CELL308404JET413 CONCENTRATED FLAME &BUTANE FUEL CELL308406 Is approximate only and results may differ due to varying conditions.*3 Year Limited Warranty. Visit cigweld.com.au for further details.**Mapp is a registered trademark of the Linde Group.#Please check burner/camping stove for suitable fuel type and connectionsCIGWELD Pty Ltd An ESAB Brand 71 Gower Street, Preston VIC 3072 AustraliaCustomer Care: Tel: 1300 654 674, Fax: 03 9474 7391, Email: enquiries@cigweld.com.auInternational Enquiries: Tel: 61 3 9474 7508 Fax: 61 3 9474 7488WE RECOMMEND GENUINECIGWELD PRODUCTSBIGGEST RANGE, BEST QUALITY & GUARANTEED PERFORMANCECIGWELD.COM.AUIn the interest of continuous improvements, CIGWELD Pty Ltd ABN 56 007 226 815 (An ESAB Brand)reserves the right to change specifications or design on any of its products without prior notice.
butane fuel cell: 4-pack 308984 bluejet torches jet407 super cyclone flame 308407 jet408 cyclone flame 308408 jet409 triple-point flame 308409 jet410 swivel torch, concentrated flame 308410 jet411 pencil flame torch 308411 jet413 concentrated flame 308413 bluejet torch & fuel combos
Brazing and Soldering: Copper Tubing and Processes 1 Learning Outcomes: After completing this section, the reader should be able to: understand the types of tubing used in ACR applications and how they are joined. describe the brazing process as used to join ACR tubing. comprehend proper torch use and setup. understand soldering processes, proper torch use and setup, and the .
6.2.3 Joint design and assembly 6.2.4 Cleaning before brazing 6.2.5 Pre-assembly of the parts 6.2.6 Brazing fluxes 6.2.7 Flux application 6.2.8 Brazing cycle 6.3 Soldering 6.3.1 Soldering alloys 6.3.2 Solderable aluminium alloys 6.3.3 Soldering process
process and ultrasonic assisted brazing process respectively. Figure 3. (a) brazing Al/Cu without ultrasonic; (b) semi-solid brazing Al/Cu with ultrasonic. There are obvious differences in microstructure between the two kinds of brazing samples. The microstructure of brazed joint of common brazing sa mple in Figure 3a is mainly dendrite and fringe
Select Brazing Alloy. Refer to the chart 12 on pg.30-31 for recommended brazing Filler Metal selection. When brazing copper to copper, alloys such as Dynaflow, Stay-Silv 5, or Stay-Silv 15 are recommended. These alloys contain phosphorus and are self- fluxing on copper. When brazing
Return-pipes in copper (Ø o 5) ss-copper transition for dielectric ss-ss direct brazing of VCR-connector to capillary ss-copper transition for subsequent orbital welding Brazingto ceramic with Cu-sleeves Assembly sequence: 1. Brazing copper sleeves to capillary/tube 2. Brazing of VCR-conn
Brazing Tool * Perform correct brazing work. Brazing for Tubes Nitrogen Gas * Strict Control against Contamin (Blow nitrogen during brazing.) Prevention from Oxidation during Brazing Lubrication Oil (for Flare Surface) * Use a synthetic oil which is equivalent to the oil used in th
The controlled atmosphere brazing (CAB) process heats a product to brazing temperatures while maintaining uniform temperatures within the product in an oxygen-free nitrogen atmosphere. During furnace brazing, a brazing sheet (fig. 1) of aluminum/silicon alloy plate (cladding) is heated to a liquid state
Soldering tip series 832 and 842 see page 40 Up to 20% higher level of efficiency due to internally heated soldering tips. ERSA 35 Soldering tip series 852 see page 40 Order no. Description With soldering tip Rating/ voltage Heating time Max. tip temperature Weight (w/o cable) 0E015CD 1E015CDA068 ERSA 15 soldering iron 0832CD, ERSADUR 15 W/230 V
