SSUUMMMMEERR II RR PP 10”3HPcabinetsaw(lefttilt) SS From .
SPRINGSUMMER2012Prices are in effectfrom March 1st toAugust 31st 2012Aluminum T-fencewith 50” rails 1,999.9950-275RLK M112” x 17” variable speed“Maxi-Lathe VS ”reg. 2,635.00IncludedIncludes 36”extension table(#50-106) andadjustable steelsupport legs(#50-115).New10” 3 HP cabinet saw (left tilt)Powerful 3 HP motor with multi-grooveV-belt.Combination riving style splitter andsee-through blade guard with anti-kickbackpawls, and a second European style rivingknife also included. Large precision-ground44” x 27” cast-iron table with two extensionwings. Magnetic safety switch with large stopbutton.! 8.9999-500reg. 9.9510” jointer25' (7.5 M)Measuringtapewith helical cutter head 799.25-200 M1reg. 1,116.00995 pc hi-speedsteel wood turningmini-chisel setFree*A 126.00 value32” bed extension for 25-200 M1 only(Item #25-205) 3,799.80-250XHC M1reg. 5,650.009922” drill pressIncludedMagnumhelical cutter headLarge surface, precision ground cast-irontables with built-in rabbeting ledge. Two waytilting fence with positive stops at 45 and90 . 5500 rpm cutter head speed. 3 HPmotor.Distributed by:reg. 260.00reg. 1,270.00*With the purchaseof 25-200 M1 only.Pivoting headDigital spindle speed display. Quick lockcontrol levers easily position 10” tool rest.Maximum distance of 17 5 16” between centers.3 variable speed ranges: 300 to 900, 600 to1800 & 1200 to 3600 RPM. ¾ HP motor. 199.99 919.9975-500 M1(Item #25-250)We reserve the right to correct any typographical and pictorial errors without notice.¾” chuck with key,laser line marker &see-through chuckguard included.Cast-iron pulleys reducevibration. Large front mountedpaddle style stop switch withlock-out safety feature to preventunwanted or unintentional start-up.Industrial 1 HP motor.FREE**Receive a 40 tooth10” carbide blade free with thepurchase of any 10” table sawlisted in this flyer.Printed in CanadaA 59.99 value
TABLE SAWS 2,999.99350R-T50-M2M / 650R-T50-M2M350R-ST52-M2M / 650R-ST52-M2M350R-T50GENERAL “T” FENCE SYSTEMMade in Canadareg. 4,100.00 (T50) / 4,145.00 (ST52)10” 2 HP cabinet sawleft tilt 1,199.9950-200R M1reg. 1,650.00Quick release combinationriving style splitter andblade guard with antikickback pawls and asecond European styleriving knife also included.Large 44” x 27” cast-irontable with two extensionwings. Cast-iron cabinetmounted trunnions. Equippedwith a sturdy, easy adjust,Tfence rip fence system. Dualvoltage motor pre-wired for230 V operation.Quick release combination riving style splitterand blade guard withanti-kickback pawls.Made inEuropean styleriving knife.10” 3 HP deluxe cabinet saw(350R right tilt / 650R left tilt)Magnetic 2-step safety switch with a lock-out key to prevent unwanted orunintentional start-up is equipped with an extra-large easy access stoppanel. “T” fence system with 50” rails (F42T50) or sliding fence system(SLT35T52). 36” extension table with adjustable steel support legs. Arbormounted on heavy-duty, permanently lubricated, sealed bearings. 3 HP motor.10” contractor sawSee-through bladeguard with splitter& anti-kickbackpawls.left tiltAluminum T-fence 999.9950-090RC M1reg. 1,250.00Combination riving stylesplitter and see throughblade guard with antikickback pawls, and asecond European styleriving knife also included.Heavy-duty, precision castiron ribbed table, with mitergauge T-slots, & stampedsteel extension wings.Deluxe, quick adjusting mitergauge. Sturdy fixed leg steelstand. 2 HP motor.10” job site sawleft tiltAluminum T-fence 1,119.9950-090RK M12reg. 1,385.00Combination riving stylesplitter and see throughblade guard with antikickback pawls, and asecond European styleriving knife also included.Heavy-duty, precisioncast-iron ribbed table, withmiter gauge T-slots, &stamped steel extensionwings. Deluxe, quickadjusting miter gauge.Folding stand with wheels.2 HP motor. 5,999.9950-560A M1Dust collectionfrom cabinet &bladereg. 7,840.0010” scoring saw with built-in sliding table(left tilt)Can be used as a regular saw, but includes a built-in sliding table forstable effortless crosscuts & a separate scoring blade for chip-free cutsin melamine & laminates.Anodized European style sliding table. Separate safety lock out switch for mainmotor & scoring motor. Solid cast-iron table with anodized aluminum coating.Heavy-duty cabinet mounted cast-iron trunnions. Precision-built rip fencesystem with 50” guide rails. 3 HP motor.Free*Outrigger slider support(Item #50-565A)An 890.00 value*With the purchase of 50-560A M1 only.
189. 59.9950-030reg. 240.00Heavy-duty mobilebase for table saws withextension table and legs900 lbs capacity. 2 heavy-duty4” wheels. 2 heavy-duty 3” swivelcaster with locking levers. 2 swivelcasters. 134.99 124.9955-0409950-EB3reg. 210.00“Osborne” miter gauge40 tooth - 10” carbide bladeSolid triangular design for tight miter joints.Sliding flip-up stop. Easy to read indexgraduations. Patented extension arm assemblymakes it quick & easy to find any angle andlock it securely in place. 499.9950-050SLF35T52reg. 196.00NewSliding rip fence (52” right 16” left)Tenoning jigfor table sawsFits on right or left tilt table saws.Heavy-duty cast-iron construction.Large handles for better operatorcontrol.Heavy duty rip fence with a 3” x 37 1/2” sliding andreversible steel fence face. Magnetic quick engage /disengage flip up fence with micro-adjustment attachmentincluded. Fully adjustable design. Full 50” right rip capacity.The new Excalibur SLF35T52 Sliding Rip Fence fits on thefollowing General and General International Table Saws: 350,350R, 650, 650R, 50-250, 50-260, 50-270, 50-275, 50-300,50-300CE, 50-305, 50-305CE.Miter angleadjustment rail withpositive stop pin.SCROLL SAWSHead tilts 45 left and right, tilting the blade notthe table, keeping the workpiece level. 2” cuttingthickness capacity. Variable speed of 400 to1400 strokes/minute (EX-16) and 400 to1550 strokes/minute (EX-21 & EX-30). 819.99EX-21K*reg. 650.00!Tilting head 574.99EX-16reg. 749.00reg. 1,104.45Onboardstoragemounts forcross cutfence.Sliding tables 1,249.99#50-SLT40P (shown)reg. 1,500.00Fits on most 10” to 14” table saws.Easy to adjust, extruded aluminum miter fence for accurate miters from 0º to50º. Cut up to 49”* with the crosscut fence positioned at the rear of the table.Crosscut and miter up to 28”* with the fence at the front of table. 1,459.99#50-SLT60P (not shown)reg. 1,790.00Fits on most 10” to 14” table saws.Easy to adjust, extruded aluminum miter fence for accurate miters from 0º to45º. Cut up to 72”* with the crosscut fence positioned at the rear of the table.Crosscut or miter up to 49”* with the fence at the front of the table.* Depending on the positioning of the main mounting bracket on your saw.FreeWith EX-21K & EX-30K#EX-21K* & #EX-30K**Special edition “K” versionwith foot switch (item #EX-01) &stand (item #EX-21BS for EX-21/ #EX-30BS for EX-30) included. 1,029.99EX-30K*reg. 1,464.45Free*Hold-down clamp(Item #50-EXHDC)A 127.25 value*With the purchase of 50-SLT40P or 50-SLT60P only.3
JOINTERS8” parallelogram jointerLarge surface 82 ⅞” cast-iron tablesHeavy-duty center-mounted cast-iron fencewith 45 , 90 and 135 positive stops. Precision four pointparallelogram table adjustment system. Magnetic safetyswitch mounted above the in-feed table for quick, easyaccess. 5000 rpm cutter head speed. 3 HP motor.IncludedWith 80-225HC M1 3,539.99Magnum helicalcutter head80-225HC M1(4 rows,total: 22 inserts)6” jointerreg. 4,200.00 894.9980-100L M1reg. 1,100.006” closed base jointer 729.9980-075L M1reg. 890.0055 ¼” long tablesLarge surface, ground cast-iron tables. Heavy-duty,three-knife cutter head. Jackscrew system for quick,easy knife adjustment. Independent in-feed andout-feed table adjustment handwheels. 5000 rpmcutter head speed. 1 HP motor.6” deluxe jointer,66 ¼” tables55 ¼” long tablesLarge surface, ground cast-irontables. Cast-iron fence with 90 &45 positive stops. Independentin-feed and out-feed table adjustmenthandwheels. 5000 rpm cutter headspeed. 1 HP motor. 1,379.9980-100LHC M1reg. 1,800.006” closed base jointerwith Magnum helical headSame features as model 80-100L M1 Magnum helical head.IncludedWith 80-100LHC M1Magnum helicalcutter head (item #100H)(4 rows, total: 16 inserts) 1,973.9980-200L M1reg. 2,400.008” jointer 1,249.9980-125L M1reg. 1,825.00466 ¼” extra long tablesLarge surface, ground cast-iron tables. Large,heavy-duty, centermounted cast-iron fence with 90 and 45 positive stops. Independant in-feed &out-feed adjustment handwheels. 5000 rpm cutterhead speed. 1 HP motor.74 ⅞” extra long tablesLarge surface, ground cast-irontables. Independent in-feed & outfeed table adjustment handwheels.Magnetic switch for added safety.5500 rpm cutter head speed.2 HP motor. 2,598.80-200LHC M1reg. 3,250.00998” jointer with Byrd style helical headSame features as model 80-200L M1 Byrd style helical head.IncludedWith 80-200LHC M1Byrd style helicalcutter head (item #200H)(4 rows, total: 36 inserts)
1,999.9930-120 M1reg. 2,650.Pre-setdepth stop 6899930-005HC M1reg. 849.0013” planer with helical headHelical cutter head with 26 reversible two-sided high speedsteel inserts.Built-in inset lifting handles. Large depth of cut adjustment handle– one full rotation equals 1 16”. 2 HP motor.PLANERS20” single surface planer15” single surface planer2 feed speeds - 16 & 20 fpm.Magnetic safety switch.Built-in mobile base withone-step lock-pedal.5 HP motor.2 feed speeds - 16 & 20 fpm.Magnetic safety switch.Heavy-duty cast-iron frame reducesvibration. Built-in mobile base.3 HP motor. 2,599.reg. 3,450.0015” single surface planerwith Magnum helical headSame features as model 30-115 M1 Magnumhelical head.IncludedWith 30-115HC M1Magnum helicalcutter head (item #125H)(4 rows, total: 42 inserts)15” single surface planerwith Magnum helical headSame features as model 30-125CE M1 Magnum helical head.Same features as model 30-300 M1 Magnumhelical head.Magnum helicalcutter head (item #30300H)(4 rows, total: 58 inserts)2 feed speeds - 22 & 28 fpm.Magnetic safety switch. Built-intable rollers reduce friction.Positive gear design for quickand accurate table adjustments.7 ½ HP motor.2 feed speeds - 16 & 20 fpm.Magnetic safety switch.Triple V-belt drive for greater power.Built-in mobile base. 3 HP motormounted in cabinet for protectionfrom dust.reg. 4,275.0020” single surface planerwith Magnum helical headIncludedWith 30-300HC M120” single surface planer15” single surface planer 3,049.Mobilebasereg. 6,225.000099reg. 6,300.0099 4,999.99 2,114.9930-125HC M1 4,439.30-300HC M130-360 M1, M2, M330-125CE M1reg. 2,760.Elliptical jigincludedreg. 4,290.000099Magnetic 2-step safetyswitch to prevent unwantedor unintentional start-up isequipped with an extralarge and a lock-out key.Cast-iron table and head.Precision machined heavyduty cast-iron dovetailedcolumn. Independent,variable speed feed motorprovides added control.7000 rpm cutter headspeed. 2 HP motor. 3,319.99 1,819.9930-115HC M17” molder30-300 M130-115 M1reg. 2,200.Guidefenceincluded00IncludedWith 30-125HC M1Magnum helicalcutter head (item #125H)(4 rows, total: 42 inserts) 6,299.30-360HC M1, M2, M3reg. 8,700.009920” single surface planerwith Magnum helical headSame features as model 30-360 M1, M2, M3 Magnum helical head.IncludedWith 30-360HCMagnum helicalcutter head (item #360H)(4 rows, total: 58 inserts)5
SANDERSreg. 1,600.00Heavy-duty opensteel stand.Heavy-duty open steelstand. Independentswitches with removablesafety key for bothconveyor motor andmain motor. 6 to 20 fpmvariable feeding speed(conveyor belt).1 ½ HP motor.Oscillatingspindle sander 464.9915-220 M1reg. 585.00Tilting tableBench top modelPrecision groundcast-iron tilting table.29 oscillations perminute. 1720 rpmspindle speed. 5 interchangeable spindlesincluding ¼”, ½”, ⅝”,1 ½” & 2”. ½ HP motor.Oscillatingspindle sander 1,374.9915-020 M1reg. 1,259.006” x 89” edge belt sanderSanding belt operates at any angle fromhorizontal to vertical.Graphite covered steel platen forreduced friction and extended belt life.1 ½ HP motor. 1,059.9915-005S M1reg. 1,319.006” x 89” oscillatingedge belt sanderSame features as model 15-005 M1 oscillating feature. 1,899.9915-010 M1reg. 2,375.006” x 108” verticaledge belt sanderTables can be adjusted up or downfor full belt use.Graphite backing reduces belt friction forlonger belt life. Dynamically balanced 7’’rubber drive roller and crowned 3’’ idler rollerto ensure solid belt tracking. 2 HP motor. 2,199.9915-010S M1reg. 2,650.006” x 108” oscillating vertical edge belt sanderSame features as model 15-010 M1 oscillating feature. 5,999.9915-275 M1reg. 7,200.00reg. 1,789.00Tilting table6Floor modelHeavy-duty oil bathgearbox.75 oscillations perminute. 1725 rpmspindle speed. 10 interchangeable spindlesfrom ¼” to 4” including¼”, ⅜”, ½”, ⅝”, ¾”, 1”,1 ½”, 2”, 3” & 4”.1 HP motor.37” horizontal doubledrum sander- 7 ½ HPHeavy cast-iron table with four solid jackscrewswith chain drive to keep the table level at all times.Two (2) magnetic safety switches - one for main motor and one for conveyormotor. Rear drum adjustment lever with convenient reference scale, no toolsor gauge blocks required. 3.7 to 14.2 fpm variable feeding speed (conveyor belt).7 ½ HP motor.15-010S M1 shown 1,329.9915-155 M1 959.9915-005 M1 shown13” horizontalsingle drum sander15-005 M1
#15-710GRINDERSOptional heavyduty 34” stand for6”, 8” and 10”bench grindersHeavy-duty cast-irontable & base, tubularsteel column withwater tray Included. 199.99 109.9915-232 M115-625 M1reg. 245.00 109.99reg. 140.00Belt sander / grinder6” low speed bench grinder3450 RPM grinding speed.4900 fpm belt speed. ⅓ HP motor.Double sealed ball-bearing construction.Adjustable aluminum tool rests. Low1725 rpm. ⅓ HP motor.reg. 135.00 1,199.99#15-035 M1 (shown)Two large surface, cast-iron, tiltingtables for unlimited sanding operations.Sanding belt operates at any angle fromhorizontal to vertical with positive stops at90 and 45 . 2250 FPM belt speed. 1750rpm disc speed. Heavy-duty model (365 lb).1 ½ HP, 110/220 V motor.Double sealed ball-bearing construction.Ajustable cast tool rests. Low 1725 rpm.½ HP motor.reg. 2,950.0015” open type wide beltsanderSafety switch with key(15-035DC M1 only)#15-035DC (not shown)6” x 48” belt & 12” disc sanderwith built-in dust collector00IncludedWith 15-035DC M1Same features as model 15-035 M1. 2,299.15-250 M1reg. 2,900.009924” horizontal doubledrum sander - 3 HPTwo 5" diameteraluminum drums8” low speed bench grinder 2,399.996” x 48” belt & 12” disc sanderreg. 1,700.reg. 215.0015-030 M1reg. 1,550.00 1,299.99 184.9915-825 M1Two 5” diameter aluminumdrums.High quality conveyor belt for longservice life. Magnetic safety switch.3 to 20 fpm variable feeding speed(conveyor belt). 3 HP motor.Conveyor motor equipped withindependant safety switch withremovable key. Magnetic safetyswitch on main motor. Side andrear extension tables for easierstock handling. 3 to 20 fpm variablefeeding speed (conveyor belt).3 HP motor.New and improvedoscillation system 4,599.9915-245 M1reg. 5,700.0025” horizontal doubledrum sander - 5 HPSteel frame and heavy-duty base forgreater stability. Includes dual accessdoors.Two (2) magnetic safety switches for mainmotor and conveyor motor. Amp meter formotor load indicator. 3.7 to 14.2 fpm variablefeeding speed (conveyor belt). 5 HP motor.Rear drumadjustment lever7
3,999.9990-380 M1, M2, M3BANDSAWSreg. 4,650.00 3,089.99Deluxe rip fence system included90-290 M1Safety feed devicereg. 3,600.00Upper and lower dualbakelite block and 7bearing, deluxe bladeguide system, with 10points of contactDeluxe rip fence system includedSafety feed deviceUpper and lower dual bakeliteblock and 5 bearing, deluxeblade guide system, with 10points of contact22” heavy-duty woodcutting bandsawDeluxe 18” heavy-dutywood cutting bandsawLaser line marker & ¾” bladeincluded. Heavy-duty one pieceframe. Safety foot brake simultaneously stops blade andmotor. 2 cutting speeds: 2820 &3936 fpm. 3 HP motor.!weNNew!14” wood cutting bandsaw 679.90-140 M1reg. 775.00!99⅜” blade includedCast-iron frame & precision-balanced aluminumwheels with replaceable rubber tires. Rip fence &miter gauge included. 2 blade speeds: 1800 &3000 fpm. Blower device. 1 HP motor.Optional riser attachmentfor 90-140 M1(Item #90-130A) 87.9914” wood cutting bandsaw 949.99reg. 1,200.00Deluxe rip fencesystem included⅜” blade includedCast-iron frame and precision-balancedaluminum wheels. Safety lock-out switch withremovable key. 2 blade speeds: 1630 & 2730 fpm.1 HP motor.Optional riser attachmentfor 90-125 M1(Item #90-130) 87.99reg. 140.008Quick releaseblade tensionDeluxe rip fencesystem includedNewDeluxe rip fencesystem included 1,899.99 1,594.9917” woodcutting bandsawDeluxe 14” woodcutting bandsaw90-240 M1reg. 140.0090-125 M1Laser line marker & ¾”blade included. Solid ribbedcast-iron table with heavyduty one-piece trunnion and0 to 45 right tilting action.Safety foot brake simultaneously stops blade andmotor. Cutting speed:4590 fpm. 5 HP (M1) &7 ½ HP motor (M2 & M3).reg. 2,400.00Laser line marker & ½” bladeincluded.Solid, high quality, precisionmachined, ribbed cast-iron table.2 blade speeds: 1560 & 3190 fpm.Wide blade selection (⅛” to 1”).2 HP motor.90-170B M1reg. 1,950.00Large 12” resaw capacity.¾” blade included.One-piece molded frame. Dynamically balanced heavy cast-ironwheels. 2 blade speeds: 2300 &3250 fpm. Safety foot brake stopsblade & motor. 1 ½ HP motor. 149.9990-075AUniversal bandsawrip fence system21” fence & 29”(front rail)& 25 ¾" (rear rail). Fits onGeneral International models: 90-100,90-125, 90-140, 90-170.reg. 165.00
WOOD LATHES14” tool rest and a6” face plate includedNewCast-ironstand!16” x 42” wood turning latheMovable emergencyswitch can be placed tosuit the operator14” x 17” variable speed“Maxi-Lathe VF” 2,249.9925-650 ABC M1reg. 2,990.00Electronic variable speedSpecifically designed and built for professionals who want superior performance. Headstockswivels 360 with positive stops at 0 , 45 , 90 , 135 , 180 & 270 and quick-lock for outboard turning. Electronic inverter for variable speed adjustment between 45-3750 rpm. Digital spindle speed (rpm) readout. Quiet, highly efficient, low power consumption 2 HP motor. 799.99 229.9925-114QC M125-010 M1reg. 329.reg. 1,129.0000ew!NIncludedPen turning mandrel setPen turning mini-latheDesigned and built specifically for turning pens and other smaller hobby type projects.Quick lock control levers easily position tool rest. Extruded aluminum frame, head and tailstock. Maximum distance of 12” between centers. 3 speeds: 1350, 2250 & 3500 rpm. Quiet,smooth running 1 5 HP motor. 419.25-03699reg. 570.00“Maxi-Lathe”duplicator(Item #25-024)A 349.00 value*With thepurchase of25-114QC M1 only.Forward / reverse spindle rotation.Digital spindle speed display. Maximum of 17”between centers. 3 variable speed ranges; 250800, 550-1700 & 1200-3600 rpm. Heavy-duty 1”diameter tool rest post. ¾ HP motor.23” bed extension for 25-114QC only(Item #25-116) 199.99reg. 260.00Pen turning starterNew!Includes 1 pen turning hardware kit for each of the following pen styles:Slimline pen*Funline pen(Item #25005-BC211)Free*Executive pen(Item #25005-BC214)(Item #25005-BP418)Polaris pen5 wooden pen blanks36” wood lathe duplicator25-19625-195NFits most 12” - 22” floor model lathes withcast bedways. Extruded aluminum baseand carriage. Smooth handwheel controlled rack & pinion system. High speedsteel cutter. (Wood lathe not included) 179.99Vertex pen(Item #25005-BP702)25-195Nreg. 249.00 109.9925-196reg. 140.00Steel support stand for Maxi-Lathe(#95-195N) & bed extensions (#95-196)Fits General International Models: 25-100, 25-114,25-114QC & 25-200.(Item #25005-BP831)Example ofa completedExecutive penBonus1 wine stopper hardware kit(Item #25005-S991)** Images shown forreference only.(Fully assembled pen andwine stopper are not included.) 49.9925-005reg. 79.009
DRILL PRESSESLine interrupterswitch 144.9970-905reg. 219.00Line interrupterswitchMortising attachment kitConvert almost any drill press into a mortiser inminutes!CONTENTS: Mounting hardware. Cast-iron chiselholder. Guide fence with workpiece hold down. 4 of themost commonly used mortising chisel and bit sets with⅝” bit shank x ¼”, 1 16”, ⅜” & ½”. Includes 52, 55, 58,60, 65 and 66 mm adapter bushings. 14.70-30099 349.9975-030 M1reg. 395.00 379.9975-150 M1reg. 470.00reg. 25.40Laser pointer for drill pressCan be installed on most drill presses. 69.9970-120reg. 101.85Self-centering pen drilling vise17” extended strokedrill press6”stroke17” drill pressRadial arm drill pressLine interrupterswitchLine interrupterswitch 749.99 629.99 549.99¾” chuck with key. Laser line marker &see-through chuck guard included.Extra long quill stroke drills deeper thanmost drill presses. Large front mountedpaddle style stop switch with lock-out safetyfeature to prevent unwanted or unintentionalstart-up. 12 spindle speeds: 255 to2750 rpm. 1 HP motor.⅝” chuck with key & see-throughchuck guard included.3 ⅛” Spindle travel. 9 spindle speeds: 295to 3580 rpm. Table swivel 360 . Forcedopening switch need a re-start in case ofpower failure. Table extension providesadditional support. ½ HP motor.⅝” chuck with key, laser line marker& see-through chuck guard included.Rotating, 45 tilting, crank-operatedworktable with quick release clamp. Forcedopening switch need a re-start in case ofpower failure. 12 spindle speeds: 340 to2800 rpm. ¾ HP motor.75-260 M1reg. 975.001014” drill presses#75-030 M1 (bench top model) / #75-150 M1 (floor model)⅝” chuck with key, laser line marker & see-through chuck guard included.Rotating, 45 tilting, crank-operated worktable with quick release clamp. Forced opening switchneed a re-start in case of power failure. Built-in lamp illuminates the drilling area (bulb not included).12 spindle speeds: 280 to 3000 rpm. ½ HP motor.75-550 M1reg. 770.0075-200RC M1reg. 730.00
619.99 1,229.9975-050T M175-075 M1reg. 790.00reg. 1,590.00MORTISERS 419.9975-040 M1Included4 Chisel& bit setsreg. 560.00 16” hollow chiselmortiser5IncludedIncluded 16” hollow chiselmortiser1” hollow chiselmortiser4 Chisel& bit sets4 Chisel& bit sets5¼”, 5 16, ⅜”, & ½” chisel& bit sets included.Features a tilting head (30 left &right) with a 180 swivel. Includessleeves for both ⅝” and ¾” chiselshanks. ½ HP motor. 290.99¼”, ⅜”, ½”, & ¾” chisel& bit sets included.Heavy-duty cast-iron construction.Lateral and longitudinal tablemovement. Tilting head and swivelfence. 1 HP motor.75-070¼”, ⅜”, ½”, & ¾” chisel & bitsets included.Heavy-duty cast-iron construction.Adjustable workpiece stop & fencemounted hold-down. Includessleeves for both ⅝” and ¾” chiselshanks. ½ HP TEFC motor.13 spindleboring machineFully adjustable fence system.Heavy-duty cast-iron construction,machined with precision. Openbase steel stand included.Powerful 1 ½ HP motor.*Drill bits not included.reg. 340.00Optional closed stand for mortiserFits on models 75-050T & 75-075 only.SHAPERS 1,499.99reg. 2,200.00OptionalBlum stylehinge boringattachment(Item #75-445) 449.99reg. 790.00 3,499.99 4,999.9940-250 M140-350 M140-450 M1reg. 2,150.reg. 4,500.reg. 6,450.0000 1,699.9975-440 M100Independentfence microadjustment¾” spindle shaper¼” & ½” router bit adapters included.2 spindle speeds with reverse: 8000 &10,000 rpm. Magnetic switch with thermaloverload protection. 3 HP motor.1 ¼” production shaper4 spindle speeds with reverse: 4000,6000, 8000 & 10,000 rpm.Magnetic switch with thermaloverload protection. Built-in retractablecastor system. 5 HP motor.1 ¼” heavy-dutyproduction shaper5 spindle speeds with reverse: 3000,4000, 6000, 8000 & 10,000 rpm.Magnetic switch with thermal overloadprotection. 2 emergency stop buttons.5 HP motor.11
TMCNC CARVING MACHINES15” x 20” CNCcarving machine 4,499.9940-915X M1TMThe next generationoffers many new features thatmake it the best value in thebench top CNC market.reg. 5,250.00Withsoftware New "Pause" function for added flexibility! New "Bordering" feature for added security! Variable jogging speed for more criticalpositioning! Improved ball screws for morerugged and accurate performance! New and improved operating systemfor smoother cutting operation!All 40-915X M1TMNew!Optional safety enclosurefor 40-915X (Item #40-919X)now comes complete with:ArtCAM Express CAD design software with training DVD!ArtCAM Express adds a whole new level of functionality to youri-CarverTM. Easy-to-learn design software with powerful CAD/CAMfunctions. Import virtually any graphic file (JPG, PNG, BMP, DXF, DWG)and easily create tool paths. Create a variety of tool paths (texturing,carving, profiling, pocketing). Customize your own textures. Over 500 3Dimages included that can be imported into your design and machined.ArtCAM Express software is fully supported by General CNC's technicalsupport team.13” x 18” CNCcarving machineOptionalstandfor 40-913(Item #40-903) 219.9912reg. 270.00reg. 1,375.00reg. 18,700.00reg. 2,895.00With V-Carve ProsoftwareTMController & i-PictureTM softwareincluded. 15,000 rpm spindle withbrushless motor. Cutting speedsup to 118” per minute. Positionalaccuracy up to 0.001”. ¼” collet,tool kit and starter tools included.1 year limited warranty. 1,159.99reg. 285.00 14,999.99 2,299.99software 244.9940-924 M140-913 M1&Optional standfor 40-915X (Item #40-905)Ideal for educational users.Impact resistant LexanTM.Safety inter-lock door(auto-shut-off).24” x 36”Junior seriesCNC RoutersTMWith&ArtCam ExpressNew Features include:PLUS!TMOptional safety enclosure for40-913 (Item #40-918)Ideal for educational users. Impactresistant LexanTM. Safety inter-lockdoor (auto-shut-off). 999.99reg. 1,235.00Easy start-up procedure and unrivalled technical support. Highlyaccurate pre-loaded linear bearing construction. 2 ¼ HP variablespeed (8,000 to 25,000 rpm) name brand router included (router bitsnot included). Cutting speeds up to 200 inches per minute. Integratedon-board computer operating system with pre-loaded operatingsoftware included.Shownwith safetyenclosureinstalled.Free*Safety enclosure (Item #40-926)A 1,200.00 value*With the purchase of 40-924 M1 only.
Bench top model withcast-iron table(#40-100C)ROUTER TABLESDeluxe router table kits#40-100 Bench top / #40-200 Floor modelHeavy-duty massive router lift with 9 ¼” x 11 ¾” aluminum top plate, stable4 post/lift screw design & chain drive lifting system controlling all 4 cornerssimultaneously. Fits all fixed base router motors*. Smooth above-the-tableadjustment mechanism for fast tool changes & precision bit setting. Two tablesizes available in either cast-iron, MDF or Phenolic. Sturdy steel stands includeeasy access on/off safety switch with removable lock-out key. Floor modelmade of tubular steel, includes, mobility kit & adjustable levelling feet. Fencehas 2 ¼” dust collection outlet & adjustable scales. Under table steel dustenclosure with access door, adjustable air vent, power cord grommet &4” dust port with 2 ¼” branch inlet to the fence including 2 ¼” dust hose &2 hose clamps.Floor model withcast-iron table(#40-200C)*some router models may require reducer collars/adaptors.Bench top model kitsFloor model kitsreg. 1,110.00reg. 1,380.00 889. 1,099.9940-100C (shown)40-200C (shown)99With cast-iron tableComplete table kit includes:(1) 40-060, (1) 40-065, (1) 40-070,(1) 40-125 & (1) 40-130.With cast-iron tableComplete table kit includes:(1) 40-080, (1) 40-085, (1) 40-075,(1) 40-125 & (1) 40-130. 784.reg. 990. 899.999940-100M0040-200Mreg. 1,115.00With MDF tableComplete table kit includes:1) 40-060, (1) 40-065, (1) 40-047,(1) 40-125 & (1) 40-130.With MDF tableComplete table kit includes:(1) 40-080, (1) 40-085, (1) 40-049,(1) 40-125 & (1) 40-130. 844.reg. 1,055. 1,019.999940-100P0040-200Preg. 1,275.00With phenolic tableComplete table kit includes:1) 40-060, (1) 40-065, (1) 40-043,(1) 40-125 & (1) 40-130.99 169.reg. 195.40-0430016” x 27”phenolic table99 299.reg. 345.40-0450024” x 32”phenolic table 6.29reg. 9.40-31200Reducerscollar for lift(fits 3 ½” motor)99 114.reg. 130.40-0470016” x 27”MDF table99 163.reg. 185.40-0490024” x 32”MDF table 6.99reg. 9.40-31450Reducerscollar for lift(fits 3 ¼” motor)99 199.reg. 249.40-0700099 364.reg. 449.40-0750024” x 32”cast-iron table99 78.reg. 94.40-13050Dustcollection kit99 129.reg. 169.40-060 117.9940-065reg. 149.0016” x 27”cast-iron tableWith phenolic tableComplete table kit includes:(1) 40-080, (1) 40-085, (1) 40-045,(1) 40-125 & (1) 40-130.Fence for16” x 27” table99 129.reg. 169.00 27.99reg. 39.40-09095Flip stopStand for benchtop model99 169.reg. 219.40-08540-080Fence for24” x 32” table9999Stand forfloor model99 29.reg. 44.40-099959 piece brasstemplate guide set 9.99reg. 13.40-09295Leveler bars for9 ¼” x 11 ¾”plates or lifts99 139.reg. 160.40-115009 ¼” x 11 ¾”aluminum insertplate 14.99reg. 19.40-16095Vertical featherboard99 66.reg. 79.40-114009 ¼” x 11 ¾”Phenolic insert plate99 369.reg. 449.40-12500Router lift 37.99reg. 59.40-17595Horizontal featherboard (set of 2)13
DUST COLLECTORPortable dustcollector - 1 HP 295.10-050 M1reg. 369.0099S 1,329.9910-210CF M1Dust collectorwith canister filter - 3 HPreg. 1,900.00Air flow capacity 2280 cfm*. Soundrating 85 to 95 dB. Equipped with1 micron canister filters. 869.9910-210 M1Dust hood rotates 360 . Support armextends to 12”. Airflow capacity of700 cfm*. 1 HP motor.Portable cyclone dustcollector - 1 ½ HP 1,179.9910-800CF M1reg. 1,600.00Airflow capacity 611 cfm*. restricted.Equipped with 1 micron canister filter.Caster mounted for portability. Remotecontroller included. 1 ½ HP industrialrated motor.“Super Turbo”air cleaning system 459.9910-600 M1reg. 625.0014Airflow Capacity of 700, 900,1250 cfm. 2 stage filtration. 5 preprogrammed timer settings (2, 4, 6,8 hours & continuous). ⅓ HP motor.Dust collectorreg. 1,275.00Same features as #10-210CF M1 with washable, extra fine2 micron filter bags replacing 1 micron canister filters.#10-210 M1 43
Easy to adjust, extruded aluminum miter fence for accurate miters from 0º to 45º. Cut up to 72”* with the crosscut fence positioned at the rear of the table. Crosscut or miter up to 49”* with the fence at the front of the table. * Depending on the positioning o
full list of plant performance based on the rating criteria, is also included (Table 7). Some of the highest scoring sun-loving annuals were. Solenostemon ColorBlaze Wicked Witch and Wicked. Hot . Wicked Hot developed flowers by July 19. Wicked Witch produced only one flower spike by August 2. Solenstemon with little to no flowering is
ASTM – Revision of ASTM B633 - Zinc Electroplating Standard . The IFI 2018 Annual report will detail that: IFI remains healthy and continues to build reserves, which remain over 2 million, which is sufficient for nearly two years of operations. Workforce development continues to be a major objective for the industry. With orders and production in the final months of 2018 .
and Career-Readiness Standards for English Language Arts. The second section includes the MS CCRS for ELA for kindergarten through second grade. The third section includes the MS CCRS for ELA for grades 3-5. The fourth section includes the MS CCRS for ELA, including Literacy in Social Studies, Science, and Technical Subjects. The final section .
Albert Woodfox a, quant à lui, vu sa condamnation annulée trois fois : en 1992, 2008, et . février 2013. Pourtant, il reste maintenu en prison, à l’isolement. En 1992 et 2013, la décision était motivée par la discrimination dans la sélection des membres du jury. En 2008, la Cour concluait qu’il avait été privé de son droit de bénéficier de l’assistance adéquate d’un .
a central part of the Revolution’s narrative, the American Revolution would have never occurred nor followed the course that we know now without the ideas, dreams, and blood spilled by American patriots whose names are not recorded alongside Washington, Jefferson, and Adams in history books. The Road to the War for American Independence By the time the first shots were fired in the American .
Broadcasting in the Supreme Court is allowed through section 47 of the Constitutional Reform Act 2005. This exemption from the Criminal Justice Act 1925 was intended to replicate the arrangements for broadcasting which had existed in the House of Lords prior to the establishment of the Supreme Court. When it was established, the Supreme Court identified a key objective of making its .
OBAT HERBAL TERSTANDAR DAN FITOFARMAKA - 29 BAB PRODUK OBAT MODERN ASLI INDONESIA HAL 30 – 100 INDEX 114 . B Informatorium Obat Modern Asli Indonesia (OMAI) di Masa Pandemi COVID-19 2 Dengan mengucap syukur kehadirat Tuhan Yang Maha Esa dan atas karunia-Nya, penyusunan “Informatorium Obat Modern Asli Indonesia (OMAI) di Masa Pandemi COVID-19” dapat diterbitkan untuk memberikan dukungan .
The Chemical and Biological Hazards Management Group fulfills, for the University, all of the legal requirements pertaining to the use of hazardous substances. Membership and remit of this Group is given in the University Health and Safety Policy (2010). The membership of this committee is given in Appendix2 . 3 3.2 Head of School/Unit The Head of the School/Unit is responsible for .
