Fire Solutions - Fire-Lite Alarms

Fire SolutionsInnovation That Endureswww.firelite.com1

Fire-Lite Alarms has a legacyof simple, reliable life-safetysystems. By designing advancedtechnology that’s also easy to use,Fire-Lite makes protecting whatmatters most easy – year afteryear. In a world where anything canchange in an instant, you can counton the consistency of Fire-Lite.Fire-Lite - Innovation that Endures.Table of Contents3 Addressable Fire AlarmControl Panels4 Emergency Command Center6 Conventional Fire AlarmControl Panels7 Releasing Control Panels8 Sychronized Power Supplies,Pull Stations, and Annunciators9 Addressable Smoke Detection,Wireless Technology,and Communicators10 Complete Fire Alarm System11 Quick Reference Guide2

Addressable Fire Alarm Control PanelsFire-Lite Alarm’s innovative, addressable control panels offer a wide rangeof capabilities to provide superior value and flexibility. They are easy to installand program with notification appliance circuit (NAC) synchronizationand enable emergency personnel to quickly locate a fire. The built-inLiteSpeed protocol ensures the fastest possible device responsetimes to help reduce property damage and save lives.MS-9600LSand MS-9600UDLSEndurance SeriesES-50X and ES-200X Single SLC that provides support for 50 (ES-50X)or 198 (ES-200X) addressable devices. Upload/download panel programming databaseand flash firmware with USB thumb drive. Support for addressable multi-criteria fire and CO detector. 4 programmable function keys to save time. Built-in Class-A capability for all 4 NACs; no optional card required. Trouble indication for SLC devices not programmed. Integrated SWIFT display driver and annunciator built-in to panel. Notification appliance circuits have built-in sync for the industry’sleading manufacturers including System Sensor , Wheelock ,and Gentex . Up to 159 detectors and 159control/monitor modules.(total of 318 devices) per SLC(636 with SLC-2LS option card). LiteSpeed protocol for SLCcommunication polls 10 devicesat a time and operateson standard, unshielded wire. Auto-programmable functionreduces installation time. Advanced fire technologyincludes sensitivity testingand automatic drift compensation. 4 programmable Class Band 2 Class A NACs.3

Emergency Command Center (ECC)Fire-Lite Alarm’s Emergency Command Center (ECC) leverages advanced technology and 60 years of life-safetyexperience to deliver critical messages through non-proprietary systems. The ECC is ideal for any building that needsa flexible, multi-zoned, and highly configurable fire evacuation and mass notification system that’s easy to maintain.ECC-50/100 PrimaryOperator Console Seamless integration and controlwhen connected to select Fire-Liteaddressable panels through theANN/ACS communication bus. May be used with any UL-listedcontrol panel (messages canbe initiated by using a dry contactor via a fire alarm NAC circuit). Includes a single 25 volt, 50 wattspeaker circuit (upgradableto 100 watts and 2 speakercircuits with optional amplifier). Speaker circuits are expandableby up to 8 outputs (withan optional ECC-CE6 module). Can support up to 14 prerecordedmessages that are fieldprogrammable for up to 60seconds of message playback.4ECC-FFTFire Fighter Telephone Built-in 2 Amp NAC outputwith sync generator. 8 Command Input Circuitsthat can be used to activatemessages 1 to 8. Optional amplifier can beconfigured as a backup in theevent the primary amplifier fails.Amplifiers are independentlypowered to eliminate systeminterruption during a short circuitcondition. Optional transformer conversionmodule available for 70.7 voltspeaker operation. Supports charging up to 26AHbatteries. Provides supervision, annunciation,and control for up to 24 remotetelephone handsets. Built-in auto-program featurefor quick installation. Can be wired for class A (Style 6or Style 7) or class B (Style 4)configuration. Can be configured for Multi-PhoneJack Audio Circuit supervision. Allows simultaneous operationof up to 10 firefighter remotehandsets.

ECC-RPUECC-LOCLocal Operator Console Remote Page Unit Provides complete controland has an interface similarto the ECC-50/100 Includes built-in microphonefor ALL CALL paging along withmessage and zone control. A maximum of 8 ECC-LOCs(or combination of other remotedisplay consoles). Includes built-in microphonefor ALL CALL paging alongwith message control. A maximum of 8 ECC-RPUs(or combination of other remotedisplay consoles). Additional 9th button can be usedto activate an optional monitormodule that can be mountedinside the cabinet for applicationssuch as HVAC shutdown.ECC-RM Remote Microphone Includes built-in microphone for ALL CALLpaging over available speaker zones. A maximum of 8 ECC-RMs(or combination of other remote display consoles).ECC-50DA, ECC-50BDA,and ECC-125DADistributed AudioAmplifiers Externally mounted amplifiersprovide an additional 50 or 125watts of addressable audiopower when connectedto the ECC-50/100. Up to 8 distributed amplifierscan be connected to theECC-50/100 for a total of 1100watts of audio power. Includes 4 built-in speakercircuits, which are expandableto 8 circuits with an optionalECC-CE4 module (a maximumof 24 audio circuits). Speaker output voltage is fieldconfigurable on ECC-50DA for either25 volts or 70.7 volts of operation. Includes a built-in power supplyand backup battery charger. ECC-50BDA provides 50 wattsof power with 50 watts as backup.It can also provide 100 watts ofpower (100 watts primary and 50watts of backup power requiresECC-50WBU).5

Conventional Fire Control PanelsFire-Lite’s 24-volt conventional fire alarm control panels (FACPs) bring the latest in microprocessor technologyto conventional fire controls. With 2-zone, 4-zone, 5-zone, and 10-zone configurations, these units offeroptions to meet most local, state, and national requirements in the most efficient and effective way possible.MS-2MS-5UD 2 initiating zones that are compatible with 2- and 4-wire smokedetectors, 1 zone programmablefor combo, supervisory,and waterflow. 5-zone Style B (Class B) or 5-zone Style D (Class A)with optional module. 1 Notification Appliance Circuit(NAC) with built-in horn/strobesynchronization. 3.0 amps maximum alarm current.MS-4 4 initiating zones that are compatiblewith 2- and 4-wire smoke detectors,1 zone programmable for combo,supervisory, and waterflow. 2 Notification Appliance Circuits(NAC) with built-in horn/strobesynchronization. Optional module converts all 4 initiating zones and 2 NACs to Class A. 3.0 amps maximum alarm currentexpandable to 6.0 amps withoptional second transformer. 3.0 amps maximum alarm current.MS-10UD 10-zone Style B (Class B) or 10-zone Style D (Class A)with 2 optional modules. 7.0 amps maximum alarm current.MS-5UD/MS-10UD Shared Features and Specifications 4 NAC Circuits Style Y (Class B) or 4 NACCircuits Style Z (Class A) with optional modules. Built-in horn/strobe NAC synchronizationwith Remote Synchronization Output. Integral 80-character LCD display with backlighting and keypad. Annunciator bus supports up to 8 devices, including ANN-80LCD Remote Annunciator, ANN-S/PG remote serial or parallelprinter gateway, ANN-RLY, 10 form C relay board, ANN-LEDZone annunciator, and ANN-I/O LED driver board for graphicannunciators. Built-in 2-line digital communicator for off-premises monitoring. 3 Form-C programmable relays.All Conventional Fire Control Panels Support System Sensor , Wheelock , Gentex , Faraday , and Amseco devices.6

Releasing Control PanelsDesigned to meet the most demanding conventional releasing applicationswith the flexibility and reliability typically found only in advanced systems,Fire-Lite’s Deluge/Preaction and Agent Release models offer rich featuressuch as built-in, easy-to-use programming templates, adjustable delaytimers, and more for customized protection.MRP-2001Deluge/PreactionControl PanelMRP-2002Agent ReleaseControl Panel 6-zone Style B (Class B)or 6-zone Style D (Class A)with optional modules. 4 Programmable Output CircuitsStyle Y (Class B). Outputs programmablefor Releasing Solenoids. Dual hazard operation. Adjustable waterflow dischargetimer and 2 soak timers. Cross-zone capability. Pre-programmed and customapplication templates. Built-in NAC synchronization. Built-in programmer. Annunciator bus supports up to 8devices, including ANN-80 LCDRemote Annunciator, remote serialor parallel printer gateway,and LED graphic annunciator. 6-zone Style B (Class B)or 6-zone Style D (Class A)with optional modules. 4 Programmable OutputvCircuitsStyle Y (Class B). Outputs programmablefor Releasing Solenoids. Dual hazard operation. Adjustable pre-discharge,discharge, and waterflowdelay timers. Programmable Abort operation. Cross-zone capability. Pre-programmed and customapplication templates. Built-in NAC synchronization. Built-in programmer. Annunciator bus supports up to 8devices, including ANN-80 LCDRemote Annunciator, remote serialor parallel printer gateway,and LED graphic annunciator.7

Remote Power SuppliesPull StationsThe FL-PS6 is a 6 amp and the FL-PS10 is a 10 amp, remote power supplywith battery charger that may be connected to any 12 or 24 volt fire alarmcontrol panel (FACP) or used as a standalone power supply. The PS Seriesprovides 24 VDC power for NACs (notification appliance circuits) configuredas either Class B or Class A (requires the ZNAC-PS optional card) withmultiple sync protocol options.FL-PS6FL-PS10 12 or 24 volt, 6 or 10 ampversions available. 4 Class B (Style Y)Class A (Style Z) outputs. Built-in Strobe Synchronizationfor ADA Compliance. Built-in 18 amp HourBattery Charger. Operates as a sync followeror a sync generator (default).BG-12 SeriesThe BG-12 is a cost-effective, noncoded series of fire alarm pull stations.They are available in both conventionaland addressable versions, includingsingle and dual action, with eitherkey lock or hex key. The BG-12 seriesis typically specified and is a go-tofor most architects and engineers.BG-8The BG-8 is a conventional, single-actionmetal fire alarm pullstation for jurisdictionswhere metal pull stations are required.Annunciators8ANN-80 and ANN-100ANN-LEDANN-I/OThe ANN-80/100 are compact,backlit 80-character LCD fireannunciators. Both mimic the FACPdisplay and provide system statusindicators for AC, power, alarm,trouble, supervisory and alarmsilence conditions. ANN-100is FM and ULC approved.The ANN-LED annunciator moduleprovides LED annunciation of generalsystem faults, and input zones andpoints when used with a compatibleFACP. It provides alarm, trouble,and supervisory indication for upto 10 input zones or addressablepoints.The ANN-I/O is a LED drivermodule that can be used witha FACP to drive most customizedgraphic annunciators. It comesin a plastic enclosure that maybe mounted inside a customannunciator or accessory cabinet,and can drive up to 40 LEDs.