Leica TDRA6000 Product Brochure

Leica TDRA6000Product Brochurewww.leica-geosystems.com/metrologyVersion 01/2009

The Laser StationLeica TDRA6000The Leica TDRA6000 Laser Station is a portableinspection system designed for precision measurementson extremely large structures. It has an operationalvolume of 600 meters measuring 3d coordinatesboth with standard reflectors, and non-contact(reflectorless). The Leica TDRA6000 sets a newstandard for ultra large scale metrology.Leica Geosystems introduced the world to Industrial TotalStations in 1983 with the legendary TC2002. In 1995 weintroduced the TPS5000 series as the world’s first fullyautomated tracking Industrial Total Station. For decades,Leica Geosystems has supplied thousands of IndustrialTheodolites and Total Stations worldwide – many in thetoughest industrial environments imaginable, indoorsand outdoors. Their ease of use and one-man operationcapability make them the obvious choice for a large varietyof metrology tasks in aerospace and shipbuilding as wellas general precision applications. We have spent the last25 years perfecting the Total Station for use in industrialenvironments, and the latest Leica Geosystems LaserStation incorporates everything that we have learned alongthe way.

A new level of speed andperformanceThe all new Leica Geosystems proprietary direct drivetechnology has been designed from the ground up for thissensor. Based on piezo technology, these new direct drivesenable high speed motorization and acceleration, at up to4x our previous generation, but still allow sub micron levelfine positioning. This revolutionary piezo technology hasvery low power consumption and because there are nogears, the drives require almost no maintenance, and arenear silent.coded glass circleA new high speed absolute angle encoder paired withour 4th generation Automatic Target Recognition (ATR)technology give the Leica TDRA6000 Laser Station thebest tracking performance in its class. This new quadrupleangle detection system is accurate to 0.5 Arc Seconds (1σ)and is capable of 5000 measurements per second. TheATR and encoder feedback loop has been optimized for usewith 1.5” corner cube reflectors and is specially tuned foruse in a 600m volume.The PinPoint Reflectorless Distance Meter allows noncontact measurements within the full 600 m volume,and has a very small visible beam that allows precisionmeasurements on difficult surfaces. This new EDM is basedon our proven System Analyzer technology that takesadvantage of both phase and time-of-flight information. TheSystem Analyzer accuracy is further enhanced (specificallyon corner cube reflectors) by passing the laser beamthrough a new anamorphic lens. This lens reshapes thebeam with an optimized profile and footprint allowing theinhomogeneous peripheral light to be cut off from the laserbeam completely.Light source (LED)CCD-array

Industrial grade measurementsWith a typical 3D point uncertainty of 0.25 mm in aShip Building30 meter volume, the new Laser Station Leica TDRA6000With a measurement volume of up to 600m with ais the most accurate Total Station ever designed fornoncontact distance meter, the Laser Station Leicaindustrial use. Automatic Target Recognition allowsTDRA6000 is positioned for any challenge, even thethe sensor to perform automated deformation studies,gigantic ship building industry. When paired withas well as track a reflector for single man operations.metrology focused software solutions designed toWhile the PowerSearch module makes re-locking on tomaximize the measurement throughput, no other sensoran interrupted reflector as easy as standing still.can compare to the Leica Laser Station’s range or accuracy.Machinery and Roller AlignmentLeica Industrial Total Stations have been used for decadesfor accurate positioning and inspection of industrialmachinery like tire building machines, and processassembly machines. Our sensors have also been thecornerstone of precision roller alignment applications foreaqually as long. Whether you are inspecting or aligningsteel mills or paper mills the Laser Station Leica TDRA600is the sensor for you.

Railway ManufacturingPower GenerationThe process of manufacturing and routine inspection forWind, Solar and Nuclear power all rely on high accuracytoday’s modern trains is not as simple as it used to be.large volume measurements to make sure that theThe railway industry has tighter tolerances and higherequipment performs at its maximum potential. Whetherthroughput than ever before. With functions like non-you are erecting towers or inspecting blades for windcontact measurements (reflectorless) and the highestturbines, laying out solar mirror fields, or inspectingspeed automation on the market, there is no better railwayNuclear reactor retrofits, the precision and flexibility of theperformer than the Laser Station Leica TDRA6000.Laser Station will be welcome changes to your daily work.Aerospace and Accelerator AlignmentThe tightest tolerances require the most precise sensors,and the Laser Station Leica TDRA6000 is the most accurateof its kind. This is not just a surveying Total Station usedfor metrology applications, it is an Industrial Laser Stationdesigned for the most demanding and highest accuracyjobs.

Targets and AccessoriesWith a collection of different metrology grade reflectors, adaptersand accessories, the Laser Station Leica TDRA6000 can beequipped to measure almost anything.Tripods and StandsWhether you work indoors or out, the stability of your setup isparamount. Therefore Leica Geosystems has a selection of tripodsto make sure that your specific job needs can be fulfilled.

Leica TDRA6000 Laser Station AccuraciesAll measurements are performed under stable indoor environmentalconditions with the target squarely aligned. Distance measurementsare verified against a laser interferometer over 120 m. Unless statedotherwise, all accuracies are Maximum Permissible Error ( 3 σ),with typical accuracies being ½ MPE (or approximately 1.5 σ).3D Point ReproducibilityThe 3D Point Reproducibility “Pre” is defined as the standard deviationbetween multiple measurements of a 3D point and is specified as afunction of the distance between the LaserStation and the measuredpoint. The accuracy specified below is achieved with Leica Geosystems0.5” TBR and/or RFI reflectors using the “Precise” measurement mode.3D Point AccuracyThe measurement uncertainty of a coordinate “Uxyz” is defined as thedeviation between a measured coordinate and the nominal coordinateof that point. This measurement uncertainty is specified as a functionof the distance between the Laser Station and the measured point.The accuracy specified below is achieved with Leica Geosystems1.5” Red Ring reflectors and the “Precise” measurement mode. Specifications are stated in Maximum Permissible Error (MPE). Typical resultsare ½ MPE.Pre 30 m volumeEDM PerformanceEDM Performance1.5”RRR & BRR20.5”TBR & RFI2ReflectiveTape3NonContact (RL)4Max Volume600 m600 m600 m600 mMin Distance2.0 m2.0 m5.0 m2.0 mAccuracy (MPE)10.5 mm0.5 mm1.0 mm2.0 mm1Uxyz 30 m volumeUxyz 30 m volume 0.5 mm 0.3 mm 13 µm/m 0.2 mm234Accuracy shown is Maximum Permissible Error (MPE). Typical results are 1/2 MPE.The 1.5” RRR is measured on the laser rail as standard.20 mm x 20 mm target from 5 m to 60 m.RL measurements are done against the laser rail from 2 to 60 mATR PerformancePower Search PerformancePower Search Performance 1.5” RRR & BRRMax Volume 100 mMin Distance 2.0 mPositioning time1 5 seconds1200 gon to full ATR LockGeneral InformationTelescope Magnification 30 xFocusing range 1.7 m to infinityKeyboard and DisplayData storageDisplay:Keyboard:Internal memory:Memory card:¼ VGA, color, touch, both faces34 keys, illuminated256 MBCompactFlash card 256 MB or 1 GBInterfaces RS232, Bluetooth WirelessOperationThree endless drives for one ortwo hand operation Precisiontrigger key for manualmeasurementsPower Managementlithium-ion batteryAC power supplyInternal:External:Weight Laser Station incl. battery 7.6 kgEnvironmental specificationsOperating temperature –20 C to 50 CDust/water(IEC 60529) IP54Humidity95%, non-condensingATRPerformance1.5”RRR & BRR0.5”TBR & RFI2ReflectiveTapeMax Volume600 m400 m40 mMin Distance2.0 m2.0 m5.0 mAccuracy (MPE) 1 0.3 mm 13 µm/mN/A 2.0 mm12Accuracy shown is Maximum Permissible Error (MPE). Typical results are 1/2 MPE.TBR & RFI reflectors can be used for point reproducibility (i.e. deformation studies).

Whether building the fastest car, the biggestplane, or the most precise tooling, you needexact measurements to improve qualityand productivity. So when it has to beright, professionals trust Leica GeosystemsMetrology to help collect, analyze, andpresent 3-dimensional (3D) data for industrialmeasurement.Leica Geosystems Metrology is best knownfor its broad array of control and industrialmeasurement products including laser trackers,Local Positioning Technology (LPT) basedsystems, hand-held scanners, 3D software andhigh-precision total stations. Those who useLeica Metrology products every day trust themfor their dependability, the value they deliver,and the world-class service & support that’ssecond to none.Precision, reliability and service from LeicaGeosystems Metrology.Leica GeosystemsMetrology ProductsMoenchmattweg 5CH-5035 UnterentfeldenSwitzerlandPhone 41 62 737 67 67Fax 41 62 737 68 rology.com774870 2009 Hexagon ABAll rights reserved.Due to continuing product development, HexagonMetrology reserves the right to change productspecifications without prior notice.Printed in Switzerland. July 2009

Leica Metrology products every day trust them for their dependability, the value they deliver, and the world-class service & support that’s second to none. Precision, reliability and service from Leica Geosystems Metrology. Leica Geosystems Metrology Products Moenchmattweg 5 CH-5035 Unterentfelden Switzerland Phone 41 62 737 67 67 Fax 41 62 .