640960300010 06 En-GB - R-stahl
ENOperating instructionsENAdditional languages ency luminairefor fluorescent lampsSeries EXLUX 6409/5ENENENENENENEN
ENENENENENENENENEN2General Information .3Manufacturer .3Information regarding the operating instructions .3Further documents .3Conformity with standards and regulations .3Explanation of the symbols .4Symbols in these operating instructions .4Warning notes .4Symbols on the device .5Safety notes .5Operating instructions storage .5Safe use .5Intended Use .6Modifications and alterations .6Function and device design .6Function .6Device design .7Technical data .8Engineering .12Mains operation .12Emergency light blocking .13Transport and storage .15General .15Batteries .15Mounting and installation .15Dimensions / fastening dimensions .16Removing protective foil .18Mounting / dismounting, operating position .18Installation .22Commissioning .26Operation .27Operating Modes .27Functional and rated operating time test .28Indications .29Troubleshooting .30Maintenance, Overhaul, Repair .31Maintenance .31Repair .36Returning the device .36Cleaning .37Disposal .37Accessories and Spare parts .37Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5
General Information1General Information1.1Manufacturer1.2ENENENR. STAHL Schaltgeräte GmbHBusiness Unit Lighting & SignallingNordstr. 1099427 WeimarGermanyR. STAHL Schaltgeräte -mail:ENENAm Bahnhof 3074638 WaldenburgGermany 49 3643 4324 49 3643 4221-76r-stahl.cominfo@r-stahl.comENENEN 49 7942 943-0 49 7942 tion regarding the operating instructionsID-No.:Publication Code:EN240622 / he original instructions are the English edition.They are legally binding in all legal affairs.1.31.4ENENFurther documentsEN Data sheetFor documents in additional languages, see r-stahl.com.ENENConformity with standards and regulationsENIECEx, ATEX, EU Declaration of Conformity and further national certificates can bedownloaded via the following link: ECEx is also available at: http://iecex.iec.ch/ENENENEN240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/53
Explanation of the symbolsENEN2Explanation of the symbolsEN2.1Symbols in these operating instructionsENSymbolENMeaningTips and recommendations on the use of the deviceENENENENDanger due to explosive atmosphereENENENDanger due to live componentsENENENENEN2.2ENENENENWarning notesWarnings must be observed under all circumstances, in order to minimize the risk due toconstruction and operation. The warning notes have the following structure: Signalling word: DANGER, WARNING, CAUTION, NOTICE Type and source of danger/damage Consequences of danger Taking countermeasures to avoid the danger or damageENDANGERENDanger to personsNon-compliance with the instruction results in severe or fatal injuries topersons.ENENWARNINGDanger to personsNon-compliance with the instruction can result in severe or fatal injuries topersons.CAUTIONDanger to personsNon-compliance with the instruction can result in light injuries to persons.NOTICEAvoiding material damageNon-compliance with the instruction can result in material damage to the device and / orits environment.4Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Safety notes2.3ENSymbols on the deviceSymbolENMeaningCE marking according to the currently applicable directive.ENEN05594E00ENAccording to marking, device approved for hazardous areas.EN02198E00EN3Safety notesEN3.1Operating instructions storageEN3.2EN Read the operating instructions carefully. Store the operating instructions at the mounting location of the device. Observe applicable documents and operating instructions of the devices to beconnected.ENENENENSafe useBefore mounting Read and observe the safety notes in these operating instructions! Ensure that the contents of these operating instructions are fully understood by thepersonnel in charge. Use the device in accordance with its intended and approved purpose only. Always consult R. STAHL Schaltgeräte GmbH if using the device under operatingconditions which are not covered by the technical data. We cannot be held liable for damage to the device caused by incorrect or unauthoriseduse or non-compliance with these operating instructions.ENFor assembly and installation Observe national assembly and installation regulations (e.g. IEC/EN 60079-14). Observe national safety and accident prevention regulations. During installation and operation, observe the information (characteristic values andrated operating conditions) on the type plates and data plates and information signslocated on the device. Before installation, make sure that the device is not damaged.ENMaintenance, repair, commissioning Before commissioning, make sure that the device is not damaged. Work on the device, such as installation, maintenance, overhaul, repair, may only becarried out by appropriately authorised and trained personnel. Perform only maintenance work or repair described in these operating instructions.240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/55ENENENENENENENENEN
Function and device designENEN3.3ENENENENENEN3.4Intended UseThe light fitting 6409/5 is equipment for lighting areas, work spaces and objects for emergency lighting in case of power failure. can be used indoors and outdoors for stationary mounting for use in Zones 21, 2, 22 and in the safe areaModifications and alterationsDANGERENExplosion hazard due to modifications and alterations to the device!Non-compliance results in severe or fatal injuries. Do not modify or alter the device.ENENENENNo liability or warranty for damage resulting from modifications andalterations.ENENENEN4Function and device designENDANGERENExplosion hazard due to improper use!Non-compliance results in severe or fatal injuries. Use the device only in accordance with the operating conditionsdescribed in these operating instructions. Use the device only for the intended purpose specified in theseoperating instructions.ENENENENENEN4.1FunctionApplication rangeThe luminaire 6409/5 is used as equipment for lighting areas, work equipment andobjects.It can be used indoors or outdoors and is suitable for emergency lighting in case ofpower failure.The luminaire is approved for use in hazardous areas of Zones 21, 2 and 22.Mode of operationA weekly functional test has been permanently integrated. An annual rated operating timetest can be deactivated and activated.When opened using a central lock, the light fitting switches off automatically(standard version).6Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Function and device design4.2ENDevice 85E0012345Lamp holderControl gearTranslucent coverCable entryConnection terminal6789Light fitting enclosureReflector plateBatteryBattery enclosureENENENENENENENEN240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/57
Technical dataENEN5ENTechnical dataExplosion ProtectionENGlobal (IECEx)ENGas and dustIECEx PTB 14.0043ENEx db ec mb IIC T4 GcENEx tb IIIC T80 C DbEx tc IIIC T80 C DcENEurope (ATEX)ENDustENPTB 14 ATEX 2021E II 2 D Ex tb IIIC T80 C DbENGas and dustENPTB 14 ATEX 2022E II 3 G Ex db ec mb IIC T4 GcENE II 3 D Ex tc IIIC T80 C DcENCertifications and certificatesCertificatesENENTechnical DataENElectrical dataENRated operationalvoltageENENIECEx, ATEXStandard:220 to 240 V 10%, 50 / 60 Hz(luminaires in accordance with IEC 60081)Optional:110 to 127 V 10%, 50 / 60 Hz(luminaires in accordance with IEC 60081)120 V 10%, 50 / 60 Hz(luminaires in accordance with ANSI IEC C78.81)ENENRated insulationvoltageENENRated operationalcurrentENInrush current320 VVoltageLamp standardSize 2Size 4230 VIEC 60081max. 210 mAmax. 340 mA110 VIEC 60081max. 410 mAmax. 750 mA120 VANSI IEC C78.81max. 370 mAmax. 670 mAIpeak 52 A; Δt 130 msMaximum number of luminaires per miniature circuit breaker 1):Type10 A16 A20 A25 AB11182330C19324050K4065811021)Typical value for 1-pole miniature circuit breaker at 25 C andnominal voltage 230 V AC; the exact number depends on the miniature circuitbreaker used8Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Technical dataENTechnical DataPower factorTHDDisconnectionof the lightProtection classENVoltageLamp standardPower factorEN230 VIEC 60081) 0.93EN110 VIEC 60081) 0.97EN120 VANSI IEC C78.81) 0.97ENVoltageLamp standardSize 2Size 4230 VIEC 6008111.9%10.8%110 VIEC 6008110.8%9.6%120 VANSI IEC C78.819.7%8.0%ENENENENWhen opening the luminaireSwitch with safety lock; when opening the central lock, all poles of the voltagesupply to the control gear are disconnected; contacts of the switching elementare positive opening, they can only be switched on again when the translucentcover and the central locking system are closed.In case of a lamp failure, the control gear disconnects the defective lamp fromthe power supply.Measures forlight guidanceENENStandard:ENENWide-beam, the luminaire reflector is whiteLateral glare reduction in the translucent coverENENwithout through wiring-30 to 55 C (1, 2)ENIN through wiring 8 A-30 to 55 C (1, 2)ENIN through wiring 16 A-30 to 50 C (1)ENRated operating time during emergency light operationis guaranteed within an ambient temperature range of -5 to 50 C.This also applies to charging and discharging of the battery. The ratedoperating time might be reduced if used outside this temperature range.(2) Battery service lifeis guaranteed within an ambient temperature range of -30 to 50 Caccording to IEC/EN 60598-2-22.240622 / 6409603000102022‑03‑11·BA00·III·en·06EN2 x 18 W; 2 x 36 W (in accordance with IEC 60081)2 x 17 W; 2 x 32 W (in accordance with ANSI IEC C78.81)(1)Storage temperatureENENAmbient conditionsFunctional ambienttemperature rangeENENI (with internal PE connection)Luminous characteristicsLampsEN-30 to 55 CEmergency luminaire for fluorescent lampsSeries EXLUX 6409/59
Technical dataENTechnical DataENMechanical dataENENENENDegree of protectionIP66 / IP67 (IEC 60598)IP64 if a breather is usedImpact strength(IK code)IK10 (IEC 62262)MaterialENENENENENEnclosurePolyester resin, glass fibre reinforcedEnclosure coloursGrey colour, similar to RAL 7035Lamp coverPolycarbonateSealSilicone seal, foamed into the translucent coverLuminaire lockingENCentral lock for M8 / A/F 13 box spanner;the translucent cover can be swivelled on its hingeMounting / InstallationENCable glandsENENENENStandard luminairePlastic:2 x M25 x 1.5 cable entry 8161 and2 x M25 x 1.5 stopping plugs 8290 (enclosed)Metal:2 x metal plates M20 x 1.5 connected bymeans of PE for metal cable entriesAttention: cable entries must be ordered separatelySpecialversion:max. 4 drilled holes for M20, M25, NPSM ½"max. 2 drilled holes for NPT ¾"ENENENMetal cable glands:ENENConnectionENENENThrough wiring10M20 x 1.5, M25 x 1.5;earthing metal cable entriesusing metal platesSpring clamp terminals6-pole: L1, L2, L3, L', N, PEClamping range:1 x 1.5 to 6 mm2 (solid)1 x 1.5 to 4 mm2 (finely stranded)1 x 1.5 to 6 mm2 (finely stranded with core end sleeve)(2 free clamping units per pole available)StandardluminairewithLuminaries are equipped with internal through wiring.Connection of ingoing and outgoing leads onopposite sites is possible.Terminals: See Tech. dataWiring cross section of the supply line connection:2.5 mm2 for max. 16 A(Observe service temperature)OptionalwithoutOn the connection side, there are 2 bores M25 x 1.5for cable entries for through wiring of the connection line(ingoing and outgoing leads on one side).Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Technical dataENTechnical DataAssemblyENStandard luminaireENStandard:2 x M8 insert nuts in the enclosureENSpecialversion:Mounting grooves in the enclosure for use of mountingand tops rails for variable luminaire mounting(variable mounting distances for luminairesSize 2: 320 to 480 mm;size 4: 670 to 930 mm)ENENENENControl gearEmergencylight modeIn the emergency light mode, only one lamp is used, which results in reducedlight outputRated operating time At optimal ambient temperature of the battery:Switchover voltageENBatterycapacityRated operatingtimeEmergency light outputSize 2Size 47 Ah1.5 h100%60%EN3.0 h60%30%ENENENFrom mains to battery operation at U 0.74 x UNFrom battery to mains operation at U 0.80 x UNENENVersionNiCd battery, gas-tightOperating voltage6VCapacity7 AhReplacing thebattery setWhen opening the battery enclosure, the connection between the battery andthe control gear is disconnected by means of a switch.The battery set can be replaced after disconnecting the plug-in contacts.ENENOptionalBreather 8162/1 from R.STAHL Schaltgeräte GmbHThe breather guarantees compliance with degree of protection IP64in all mounting positions. The breather may not be used in atmospheres withcorrosive gases.For further technical data, see r-stahl.com.240622 / attery setBreatherENEmergency luminaire for fluorescent lampsSeries EXLUX 6409/511ENENENENEN
EngineeringENEN6EngineeringEN6.1Mains operationENENEN6.1.1 Stand-by operation The light fitting is switched off.ENL PENL1L2L3ENENENENENENPENL1ENENENEN16397E006.1.2 Continuous operation The light fitting is switched on.ENL ENPENL1L2L3ENENENENENPENL1EN16398E006.1.3 Normal lighting operation The light fitting is operated by normal lighting.L PENL1L2L3PENL116399E0012Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Engineering6.2ENEmergency light blockingA remote switch for emergency light blocking can be connected to terminals 9 and 10 ofthe control gear.mit Brückewith jumper 3 hohne Brücke1,5 hwithout jumperFernschalterRemote switchFernschalterRemote switchBATBAT ENENENFLED greenLED grünLED redLED rotENEN141312111098ENENENENEN16400E00Remote switch is closedRemote switch is openedPower supplyoperationSwitching on the luminairedepending on operating modeSwitching on the luminairedepending on operating modePower failureEmergency light functionNo emergency light functionENENENENEN6.2.1 Connection version remote switchThe remote switch is directly connected to the control gear.ENENThe following connection versions are possible:ENENPoint-to-point connectionENENENENEN18474E00240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/513
EngineeringENLinear e following conductor specifications must be observed during connection.ENENPoint-to-point connectionLinear connection500 m100 mmaximum conductor lengthENx1ENx250 mENx3500 mmaximum number of light fittings 50ENCable cross sectionEN1.530mm21.5 mm2ENEN14Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Transport and storage7Transport and storage7.1General7.2ENENEN Transport and store the device only in the original packaging. Store the device in a dry place (no condensation) and vibration-free. Do not drop the device.ENBatteriesEN ENENDo not transport together with other materials.Do not transport in explosive dust atmosphere.Handle with care.Store protected from fire, sources of dust, harmful gases and liquids.Store in a dry and cool location.ENENENENRecommendation: Store battery at an ambient temperature of 5 to 25 C and a relative humidity of65 5 %. The storage period is reduced of up to one month if stored outside thistemperature range.8ENENENENMounting and installationENDANGERENExplosion hazard due to incorrect installation of the device!Non-compliance results in severe or fatal injuries. Carry out installation strictly according to the instructions and nationalsafety and accident prevention regulations to maintain the explosionprotection. Select and install the electrical device so that explosion protection is notaffected due to external influences, i.e. pressure conditions, chemical,mechanical, thermal and electric impact such as vibration, humidity andcorrosion (see IEC/EN 60079-14). The device must only be installed by trained qualified personnel who isfamiliar with the relevant standards.NOTICEMalfunction or device damage caused by condensation.Non-compliance can result in material damage! operate the luminaire continuously or periodically over extended periods of time. avoid thermal bridges.240622 / rgency luminaire for fluorescent lampsSeries EXLUX 6409/515ENENENENENENEN
Mounting and installationENEN8.1Dimensions / fastening dimensionsDimensional drawings (all dimensions in mm [inches]) – Subject to modificationENEN183,5 [7,22]ENM25 x 1,5L1L2L3M25 x 1,5125[4,92]ENEN16127E00ENENENDimen- Light fittingsionsSize 2Size 4ENL1857 [33.74]1467 [57.76]ENL2 1)400 [15.75]800 [31.50]ENL3 2)320 to 480 [12.60 to 18.90]670 to 930 [26.38 to 36.61]EN1)2)ENENfixed mounting distancevariable mounting distanceEXLUX 6409/5ENENDimensional drawings for assembly parts and accessories(all dimensions in mm) – Subject to N215 [8.46]EN193 - 198 [7,60 - 7,80]124 [4,88]EN11 [0,43]ø 6,10[ø .0,24]ø 8,10[ø 0,32]13 [0,51]30[1,18].9[0,35]74 [2,91]32 [1,26]6,10[0,24]86 [3,39]9[0,35]15778E0015779E00Mounting rail16Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Mounting and installationENDimensional drawings for assembly parts and accessories(all dimensions in mm) – Subject to alterationsENENENENENENEN15782E00Ring bolt fittedin insert nut ofthe luminaire15781E00Mounting bracketfitted in mountingrailEN15783E00Pipe clamp fittedin mounting railENENENENENENENENENENENENENEN15780E00ENWall mounting bracketfitted in mounting railØ 42 0,60[Ø 1,65 0,02]EN17755E00DimensionsLight fittingSize 2Size 4L11135 [44.69]1744 [68.66]L2390 [15.35]338 [13.31]Linear luminaire EXLUX with pole mounting sleeve240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/517
Mounting and installationENEN8.2ENENRemoving protective foilAs standard, the luminaire is generally delivered with protective foil on the translucentcover. However, in some cases, it can be delivered without protective foil.DANGERENExplosion hazard due to electrostatic discharge!Non-compliance results in severe or fatal injuries. Only remove protective foil in safe areas.ENENENEN If protective foil is available:Remove protective foil prior to commissioning.ENENEN8.3Mounting / dismounting, operating positionDANGERENExplosion hazard due to electrostatic discharge!Non-compliance results in severe or fatal injuries.ENENDo not use the luminaire in strong charge generating environments!ENENThe following processes/activities should be avoided: accidental friction particle currentsENENDANGERENExplosion hazard due to inadmissible heating!Non-compliance results in severe or fatal injuries. Avoid external heat sources and/or direct sunlight (risk of change oftemperature class or change of maximum permissible surfacetemperature). Do not exceed the maximum ambient temperature due to external heatsources (premature failure of equipment).ENENENENENThe luminaire is suitable for wall and ceiling mounting.In event of wall mounting in outdoor areas, avoid installation with central lockat top.The mounting position with upward light emission in outdoor areas isprohibited.Suspension at fixed mounting pointsSize24L2L2 mm [inch]400 [15.75]800 [31.50]max. screw-in depth 10 mm [0.39]16324E0018Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Mounting and installationENSuspension at movable mounting partsENLLENL4L4ENLLENENENEN16325E00Mounting bracketSize24L4 mm [inch]320 [12.60]670 [26.38]EN16326E00Top railENENL mm [inch]80 [3.15]130 [5.12]ENENENENLateral mounting pockets for variable points of suspension.ENWhen mounting the luminaire using top rails, ensure that the mountingsurface is flat. Otherwise, the enclosure might be mounted in a warped/twisted way. The result is leakage of the luminaire and difficulties in replacingthe translucent cover.ENENENENENENPole mounting using pole mounting sleeveENENEN18483E0018482E00240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/519
Mounting and installationENPole suspensionPole mounting using pipe NLENENENENEN16328E00ENSize24ENL4 mm [inch]320 [12.60]670 [26.38]L mm [inch]80 [3.15]130 [5.12]For pipe clamp mounting, use the solution of R. STAHL Schaltgeräte GmbHwith integrated mounting rail providing reliable and stable four-point fixing!In case of point suspension using pipe clamps,R. STAHL Schaltgeräte GmbH does not guarantee the strength andtightness of the luminaire!20Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Mounting and installationENWall bracket mountingENENx15LEN10L4 ENLENENENENEN15517E00ENEN15515E00Size24L4 mm [inch]320 [12.60]670 [26.38]ENL mm [inch]80 [3.15]130 [5.12]ENENENENContinuous row mountingEN1: Rail profile2: Luminaire1ENENENENEN206250E00EN06033E00EN800 mm / 31.50 " (32 W / 36 W)400 mm / 15.74 " (17 W / 18 W)200 mm / 7.87 "320 . 480 mm / 12,60 . 18,90 " (17 W / 18 W)670 . 930 mm / 26,38 . 36,61 " (32 W / 36 W)16334E00R. STAHL Schaltgeräte GmbH - rail profile for continuous row mounting of linearluminaires EXLUXThe rail profile facilitates row mounting and installation of the luminaires.The rail profile can also be used as a cable duct.Always use mounting rails to adjust the luminaires to the hole pattern of the rail profile.240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/521
Mounting and installationENENEN8.4Installation8.4.1 Opening and Closing of the EnclosureENDANGERENRisk of electric shock due to improper opening!Non-compliance results in severe or fatal injuries. Open luminaires without switch only in de-energized state(see information plate on the lock)!ENENENENRecommendationOpening and closing of the luminaire by using a socket wrench fromR. STAHL Schaltgeräte GmbH.ENENENENENENENENENEN15448E00EN170EN Remove the closing cap of thecentral lock. Turn the central lock using a boxspanner M8, spanner size 13,by 90 to the left as far as it will go. Swivel down the translucent cover. Proceed in reverse order to close. The seal of the translucent cover mustlie correctly on the sealing edge. Push the closing cap onto the centrallock opening (protection against dirt).EN165 EN15451E00EN90 EN15436E00Observe the following during mounting and dismounting: Version without switch: Disconnect the luminaire from the power supply,secure it against being switched on again and open the battery case inorder to disconnect from the battery voltage. Do not use force when opening or closing the enclosure.Central lock Version with switch: The luminaire is positively disconnected from thepower supply by actuating the central lock. In open end position and with translucent cover swivelled down,an anti-pumping device prevents the central lock from being actuated.22Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Mounting and installationENOpening and closing the reflector plate1215512E00ENOpening: Open the reflector plate bypressing down on thesafety latch (1). Swivel down the reflectorplate (2).Closing: Flip up the reflector plateand snap it into place.ENENENENENENENENOpening and closing the battery caseOpening: Loosen the screws (1)(cross head H2). Open the battery cover (2).Closing: Close the battery cover (2). Tighten the screws (1)(cross head H2) firmly (2 5E00240622 / ency luminaire for fluorescent lampsSeries EXLUX 6409/523
Mounting and installationENENENEN8.4.2 Electrical connectionsElectrical connectionObserve the maximum clamping possibility of the connecting terminals(see chapter "Technical data").ENObserve the following when connecting to the main supply: Clamping must be carried out precisely! Do not clamp any part of the conductor insulation! Do not mix up the conductors! Observe the technical regulations when connecting the conductor! Clamp the conductor firmly. The phase L1 must be directly connected to the grid which functions as chargingphase for the battery!ENENENENENENNOTICEENDanger due to wrong connection.Malfunction Phases L and L1 must be connected in phase.ENENENConnection terminalsENENClamping range:1 x 1.5 to 6 mm2 (solid)1 x 1.5 to 4 mm2 (finely stranded)1 x 1.5 to 6 mm2 (finely stranded with core end sleeve)(2 free clamping units per pole available)ENENENENENStripping length:10 to 12 mmENENStandard:ENL' switched phaseL1 charging phaseL2, L3 phaseL2N neutral conductorL1PE protectiveconductorL‘L3NPE20294E00Through wiring of the mains supply connectionThrough wiring with 2.5 mm2 cross section for max. 16 A.24Emergency luminaire for fluorescent lampsSeries EXLUX 6409/5240622 / 6409603000102022‑03‑11·BA00·III·en·06
Mounting and installationEN8.4.3 Cable entriesThe standard luminaire is delivered with 3 lead-in holes, 2 cable glands and2 stopping plug.Tightening torques for components from R. STAHL Schaltgeräte GmbHLuminaires with installed cable entries and stopping plugs fromR. STAHL Schaltgeräte GmbH must be tightened using the following values:ENENENENENENTightening torqueConnection threadPressure scre
3.1 Operating instructions storage Read the operating instructions carefully. Store the operating instructions at the mounting location of the device. Observe applicable documents and operating instructions of the devices to be connected. 3.2 Safe use Before mounting Read and observe the safety notes in these operating instructions!
23 October Mapleton Choir Spring Concerts : Friday 23 October @ 7pm and Sunday 25th October @ 2.30pm - held at Kureelpa Hall . 24 October Country Markets, Mapleton Hall 8am to 12 noon. 24 October Community Fun Day, Blackall Range Kindergarten. 3 November Melbourne Cup Mapleton Bowls Club Luncheon, 11am.
This manual explains how to use the API (application programming interface) functions, so that you can develop your own programs to collect and analyze data from the oscilloscope. The information in this manual applies to the following oscilloscopes: PicoScope 5242A PicoScope 5243A PicoScope 5244A PicoScope 5442A PicoScope 5443A PicoScope 5444A The A models are high speed portable .
ARTIFICIAL INTELLIGENCE, STRATEGIC STABILITY AND NUCLEAR RISK vincent boulanin, lora saalman, petr topychkanov, fei su and moa peldán carlsson June 2020. STOCKHOLM INTERNATIONAL PEACE RESEARCH INSTITUTE SIPRI is an independent international institute dedicated to research into conflict, armaments, arms control and disarmament. Established in 1966, SIPRI provides data, analysis and .
Magnetic Flux Controllers in Induction Heating and Melting Robert Goldstein, Fluxtrol, Inc. MAGNETIC FLUX CONTROLLERS are materials other than the copper coilthat are used
Keywords: empon-empon, herbal medicine, production, management, marketing. PENDAHULUAN Indonesia merupakan salah satu negara penghasil komoditi obat-obatan yang potensial. Aneka ragam jenis tanaman obat telah diproduksi sebagai bahan baku obat modern maupun obat tradisional (jamu). Prospek pengembangan produksi tanaman obat cukup cerah antara lain karena berkembangnya industri obat modern dan .
Camilla TOWNSEND (Rutgers University) In the latter half of the seventeenth century, one of the most remarkable women in the world lived in a stone cell in the Convent of San Jerónimo in Mexico City. This was Sor Juana Inés de la Cruz, famous as a poet and a philosopher, and later, as the author of La Respuesta a Sor Filotea1, an extraordinary defense of a woman’s right to study and to .
The 721E and 821E are powered by a Tier III Case 667TA/EED diesel. This electronically-controlled 6.7 litre engine provides a choice of three power and torque ratings, designed to perfectly match the requirements of the machine in any application, maximising fuel economy. There are four Working Modes, controlled by the operator from a console in the cab. Standard is for use in normal operating .
level. Students who show “-1” as their proficiency placed at a Kindergarten Readiness level (Pre-K) Students who show “1-“ or “3-“ as their proficiency scored at the lowest grade level available in their screener. They will be assigned 1st or 3rd grade learning paths, but may be working at an even lower grade level.
