LJR106 AssembLy InstRuctIons - Ludwig Drums
1. PArts 1) Bass Drum 2) Bass Drum Hoops 3) Bass Drum Heads a. Front b. Back 4) Bass Drum Tension Rods & Claw Hooks 5) Bass Drum Spur 6) Bass Drum Pedal 7) Bass Drum Beater 8) Floor Tom 9) Floor Tom Key Rods 10) Floor Tom Hoops 11) Floor Tom Drum Heads 12) Floor Tom Legs 13) Tom 8” 14) Tom 10” 15) Tom Arms/Holders 16) Snare Drum 17) Snare Drum Basket 18) Snare Drum Base 19) Hi-Hat Stand Base 20) Hi-Hat Stand - Top 21) Hi-Hat 8” Cymbals 22) Cymbal Stand - Top 23) Cymbal Stand Base 24) 10” Cymbal 25) Drumsticks 26) Drum Key LJR106 Assembly Instructions 8. 18. 16. 14. 17. 1. 13. 12. 5. 11. 3b. 2. 4. 7. 24. 23. 19. 3a. 6. 15. 9. 10. 20. 26. 25. 21. Bass Drum Assembly Instructions 1) Place the Bass Drum (1) flat on the floor to attach the heads (3a-b) and hoops (2). You will want to seat the Ludwig logo head (3a) on the front of the bass drum, closest to where the spurs will be on the shell. Place the hoop (2) on top of the head and make sure it sits evenly. 2) Bass tension rods (4) are longer in length than the floor tom rods and should have a white washer on them. Place them thru the claw hooks, then place the claw hooks on the hoop (2) straight in line with the bass drum lug. Hand tighten the tension rod into the lug; repeat all the way around the drum. 3) After you have hand tightened all of the tension rods, use the drum key (26) to apply more tension to the head. Repeat steps 1,2 & 3 for the batter side head (3b) (opposite side, closest to player). 4) Insert one bass drum spur (5) (leg) on each side and hand tighten them with the T-handle located on the bracket. 22.
2. LJR106 Assembly Instructions Bass Drum Pedal Assembly Instructions 5) Insert the bass drum beater (7) into the top of the pedal (6) and tighten the wing screw. Floor Tom Assembly Instructions 7) For the floor tom (12), take the two clear drum heads (11) and use the same principals as indicated in steps 1, 2 & 3 noted above. You will place the chrome rim (10) on the head of the drum, then insert the key rods (9) thru the holes of the rim and into the lugs on the drum. 6) Insert the pedal onto the bottom of the bass drum rim. The base of the pedal will go beneath the bass drum and the clamp will go over the top of the rim. Use the T-handle to fasten the pedal onto the rim. Make sure it is aligned evenly between the two bottom tension rods. 8) With the floor tom sitting upside down, insert the three floor tom legs (12) thru the brackets and tighten them in using the T-handle. Rack Tom Assembly Instructions 9) Insert the tom arm/holders (15) into the bass casting and tighten them down. 10) Insert the toms (14 & 15) into the tom arms and tighten them down using the T-handles on the tom brackets. Once everything is setup you will want to adjust the height of the toms according to the size of the player.
3. LJR106 Assembly Instructions Snare Stand Assembly Instructions 11) Take the top basket section (17) of the snare stand and insert it into the bottom half base of the stand (18). Adjust the height by tightening the T-handle located at the top portion of the base of the snare stand. 12) Place the snare (16) evenly on top of the snare basket. Hi-Hat Assembly Instructions 13) For putting together the Hi Hat stand, begin by folding out the three legs located on the bottom half of the stand (19). Once the legs are touching the floor use the T-handle to tighten them down for stability. 14) There is a thin metal upper pull rod that you tighten into the base of the Hi Hat stand (20). After you’ve done this, place the upper tube over the top of this pull rod and down into the base of the stand. Simply tighten down the T-rod located at the top of the base of the stand to hold the upper tube in place. 15) Now you’re ready to place the Hi Hat cymbals (21) onto the Hi Hat stand. Remove the bottom stop nut, metal washer and felt washer from the Hi Hat clutch and insert the clutch thru the top Hi Hat cymbal. 16) Place the other felt thru the bottom of the clutch and make it so it is in contact with the bottom of the cymbal. Following that, place the metal washer provided onto the felt and tighten the stop nut onto the clutch and against washer. 17) Place the bottom Hi Hat cymbal onto the stand/upper pull rod. Then place the top cymbal on top of that and you are finished with the Hi Hat stand.
4. LJR106 Assembly Instructions cymbal Stand Assembly Instructions 18) All that’s left now is the cymbal stand, you are almost there! Simply place the upper tube (22) thru the bottom base (23) and tighten the T-handle to hold the upper tube in place. 20) Tighten down the wing screw at the top of the stand and you are ready to play! 19) Place the 10” cymbal (24) on top of one of the cymbal felts at the top of the stand, then place the second felt on top of the cymbal.
around the drum. 4) Insert one bass drum spur (5) (leg) on each side and hand tighten them with the T-handle located on the bracket. 1) Bass Drum 2) Bass Drum Hoops 3) Bass Drum Heads a. Front b. Back 4) Bass Drum Tension Rods & Claw Hooks 5) Bass Drum Spur 6) Bass Drum Pedal 7) Bass Drum Beater 8) Floor Tom 9) Floor Tom Key Rods 10) Floor Tom .
ELEMENT SERIES 33- 36 ACCENT CS 100 SERIES 37-38 SNARE DRUMS 39-48 LUDWIG HARDWARE 49-51 LUDWIG ACCESSORIES 51-52 . Cirtus glass glitter 14x24" Bass Drum [LLB344XXCM] 9x13" Tom Tom [LLT393XXCM] 16x16" Floor Tom [LLF366XXCM] 6.5x14" Snare Drum [LLS364XXCM] www.ludwig-drums.com 12
Egmont Overture Ludwig Van Beethoven Classical Beethoven King Stephan Overture Ludwig Van Beethoven Opera Leonore Overture No. 3 Ludwig Van Beethoven Classical Symphony No. 3 in Eb ("Eroica") Ludwig Van Beethoven Classical Symphony No. 5 in C Minor Ludwig Van Beethoven Classical Symphony No. 6 ("Pastoral") in F Major Op. 68 Ludwig Van Beethoven .
T i m p a n i a n d C o n C e r T d r u m s P.O. Box 310 Elkhart, Indiana 46515-0310 U.S.A. www.ludwig-drums.com AV8084-1 Ludwig products are available for sale through authorized Ludwig dealers.
Dexter Axle Hubs & Drums End Units & Pre-Greased Hubs Hubs & Drums for “Dexter” 8K Axles Hubs & Drums for “QRG” 10K Axles Hubs & Drums for “AL-KO/Hayes”8K Axles Hubs & Drums for “AL-KO/Hayes”10K and Larger Axles Hubs & Drums for “Dexter”9K and Larger Axles Agricultural Hub Groups Agricultural Wheels Bearings & Races Seals
6.2 Channel Strip Overview 6.3 Mixer Options 6.4 Routings Page 6.5 Using AUX Busses 7 ADDENDUM 7.1 Perfect Drums Preset System 7.2 Perfect Drums Factory Instrument List 7.3 Perfect Drums Default MIDI Mapping 7.4 Perfect Drums In Your Mix 7.5 Sharing Your Instruments 8 TECHNICAL SUPPORT & CONTACTS TABLE OF CONTENTS 1 TABLE OF CONTENTS 1 2 2 2 3 .
Barber Samuel Agnus Dei (Adagio for Strings) 181 Hal Leonard Beethoven Ludwig van Choral Fantasia 81 Kalmus S26,A21,T16,B18, 2P/V Beethoven Ludwig van Choral Fantasia 41 H. W. Gray P/V Beethoven Ludwig van Hallelujah Chorus (Mt. of Olives) 151 Banks, Harris, Novello Beethoven Ludwig van Mass in C Major 196 Kalmus
Connect your V-Drums sound module to your computers USB port. Tom Placement: If you use your V-Drums kit with 1 front tom and 2 floor toms, you need to change the arrangement to “2 front toms”. Please refer to the manual of your V-Drums kit. TO THE COMPUTERS
Immersive Adventure Tourism is about building up to the adventure activity with soft immersion in the natural and culture assets that make a place distinct from any other. The aging population is a big driver of this trend. 2/3 rd’s Of travellers cite adventure 42% costs, on avg. are spent directly in activities as the focus of their holidays, the lions share of which are “soft .
