ExpressMonogram Wizard 1 Create A Monogram
Page 1ExpressMonogram Wizard 1 – Create a MonogramLearn how easy it is to create, even customize, beautifulmonograms with Express Monogram Wizard. Create amonogram, then open it and make changes with ease.1. Double-click to open the PREMIER Embroidery System.2. Click the Change Hoopicon.Notice that you can change the hoop size directly from the Home tab, or from the icon on the toptoolbar.3. In the Universal hoop group, set the hoop size to 150mm x 150mm Universal Square Hoop 2.4. Set the orientation to Natural.Notice that the orientation is listed as Natural or Rotated rather than Vertical or Horizontal.5. Click OK.6. Select the Wizards tab.7. Choose ExpressMonogram.8. On the Monogram tab, click the Show All arrow.9. Select Small-Full-Smallas the monogram type.10. In the Letters box, enter the letters for the monogram, with the last initial being the center letter,here DBR.11. In the Envelope box, select the first option, SFS Classic01.12. Select the Full Letter tab.13. Click the Show All arrow in the Font box.14. Choose the Script category, Nimbus 15-45mm.15. Set the size to 40mm.16. Click the Small Letter tab.VIKING, PFAFF, PREMIER and 6D are trademarks of Singer Sourcing Limited LLC. HUSQVARNA is the trademark ofHusqvarna AB. All trademarks are used under license by VSM Group AB. 2016 Singer Sourcing Limited LLC.
Page 217. Click on the Alternative styleicon to turn it off.When the icon is highlighted it is on or active.If desired, click the Back arrow and set the spacing on the Full Letter tab so that it is pleasing.18. Select the Border tab.19. Select Motif Line as the border.20. Click the Options button.21. In the Universal Group, General Motifs 1, select pattern 10.22. Leave all settings at default and click OK.23. Set the Margin to 12mm, and make sure there is a check mark in Rounded Corners.24. Click the Thread Color Change icon.25. Pick the thread color of your choice and click OK.26. Click Finish.27. Click Save As in the Quick Access tool bar.28. If necessary, browse to \Documents\Premier \My Designs.29. Name the file DBR (your letters) Monogram and click Save.You’re not going to Export right now because this monogram is for your daughter, and you want herapproval before finalizing for your embroidery machine.VIKING, PFAFF, PREMIER and 6D are trademarks of Singer Sourcing Limited LLC. HUSQVARNA is the trademark ofHusqvarna AB. All trademarks are used under license by VSM Group AB. 2016 Singer Sourcing Limited LLC.
Page 3ExpressMonogram Wizard 2 – Adjust a MonogramYou’ve gone on about your work while you’re waiting to meet with your daughter and get her approvalon the design. You finally meet with your daughter. It’s not quite what she had in mind, so you need tomake a few changes.30. Click the File tab.31. Click Open.32. Browse to your monogram design and open it.The monogram is saved as .vp4 file. This format allows you to edit the elements of the monogramwithout having to remake the whole design.Notice that the design on the screen was replaced and the hoop automatically changed to the hoop usedto create the design!33. Right-click on the monogram.34. From the pop-up window, select Properties.35. The ExpressMonogram wizard opens, allowing you to make any changes necessary to the design.36. Click on the Full Letter tab.37. Click on the Show All arrow to see all fonts.38. Scroll up and select the Foam category.39. Select Scribe Foam 30-50mm.40. Change the size to 45mm.41. Click on the Small Letter tab.42. Click on Alternative Style.The Alternative Style icon is now highlighted.43. Click on the Show All arrow in the Font box.44. In the Script Category, select Nimbus 15-45mm.45. Click on the Border tab.46. Click the Options button.47. In Category, select Flowers & Leaves 1, pattern 10.VIKING, PFAFF, PREMIER and 6D are trademarks of Singer Sourcing Limited LLC. HUSQVARNA is the trademark ofHusqvarna AB. All trademarks are used under license by VSM Group AB. 2016 Singer Sourcing Limited LLC.
Page 448. Reduce the height to 12mm, leaving Proportional checked. Click OK.49. Set the Margin to 20mm.50. Click on the Thread Color Change icon.51. Pick the color of your choice and click OK.If desired, go back to the Full Letter tab and adjust Spacing.Change colors for letters as desired.52. Click Finish.53. Click Save to overwrite the original file.Remember Save will over-write, Save As will allow you to create a new file name.54. Click Export.55. Choose the format for your embroidery machine.56. Review the Optimize for Sewing settings and click OK.Notice that the name is remembered, and the word Exported added to the end.57. Click Export.VIKING, PFAFF, PREMIER and 6D are trademarks of Singer Sourcing Limited LLC. HUSQVARNA is the trademark ofHusqvarna AB. All trademarks are used under license by VSM Group AB. 2016 Singer Sourcing Limited LLC.
Page 5ExpressMonogram Wizard 3 – Add Appliqué to a Monogram58. Right-click on the monogram, and select Properties.59. Click the Border tab.60. Click Add Appliqué.61. Click Select Fabric.62. In Applique Type choose Fabric.63. Under Fabric Options choose Load Previously Saved.64. Click the next to General.65. Scroll to Leaves category and Click.66. Scroll to the very bottom of the leaves category and pick Leaves 5 –18.67. Click OK.68. Click OK.69. Click Finish.70. Click the Design Player in the Quick Access tool bar.71. Click Play and then Fast Forward to “stitch” through the design.Messages come up in the Design Player explaining when to add fabric or puffyfoam and when to cut fabric or remove puffy foam.These messages will only show in the software not on machines.72. Go to File.73. Click Export Appliqué Pieces.You can export your appliqué templates for cutters, cutwork needles or simplyprint a template so you can cut the appliqué before you stitch.74. Click Cancel.VIKING, PFAFF, PREMIER and 6D are trademarks of Singer Sourcing Limited LLC. HUSQVARNA is the trademark ofHusqvarna AB. All trademarks are used under license by VSM Group AB. 2016 Singer Sourcing Limited LLC.
1. Double-click to open the PREMIER Embroidery System. 2. Click the Change Hoop icon. Notice that you can change the hoop size directly from the Home tab, or from the icon on the top toolbar. 3. In the Universal hoop group, set the hoop size to 150mm x 150mm Un
(b) A wizard follows the user and updates his or her location in the wizard UI on a tablet PC. Figure 2. Topiary’s wizard UI. The wizard map represents entities’ current location and orientation; to simulate updates, a wizard drags them on the map. The end-user screen lets a wizard mon
Recover files detected by their signatures wizard on page 69 Recover files from a formatted partition wizard on page 73 Recover files from a deleted partitions wizard on page 75 Recover files from a physical disk wizard on page 77 Restore a deleted partition wizard on page 82 Create a new partition wizard on page 83
The User Profile Wizard User Guide. This document! The Deployment Files folder. This folder contains the files needed to migrate a workstation to a new domain. User Profile Wizard The User Profile Wizard Command Line Console The User Profile Wizard Deployment Kit We will reference these icons throughout this user guide.
Create Nagios Monitoring Objects In this example you will use the NRPE Configuration Wizard which will create the host and service objects. Navigate via the top menu bar to Configure Run a configuring wizard, and select the NRPE wizard. In the following screenshot you can see how the search field allows you to quickly find a wizard.
igns.html#1277195 You can use the Campaign Wizard to guide you through the process of creating a campaign. To create a campaign using the Campaign Wizard 1.From theActions list on the Campaigns tab, select Create Campaign (Wizard). Sugar displays the Campaign wizard on the screen. Select Type as .
Wing Type Surface Setup is the last step in the Wizard. Press the in the upper right corner to save settings and exit the Wizard. The application will display the AS3X Settings menu after exiting the Wizard. Exit the Wizard
The Royal Shakespeare Company’s stage adaptation of The Wizard of Oz is a musical based on the novel The Wonderful Wizard of Oz by L. Frank Baum, and the 1939 Metro-Goldwyn-Mayer film, The Wizard of Oz, with a book by John Kane, music by Harold Arlen and lyrics by E.Y. Harburg. It debuted at the Barbican Theatre in London’s West
coronavirus and are considered ‘extremely vulnerable’. They include: people with severe respiratory conditions including all cystic fibrosis, severe asthma and severe COPD people on immunosuppression therapies sufficent to significantly increase risk of infection people with specific cancers or receiving cancer treatment. There are more groups in this list, so please visit the .
