Environmental Product Declaration Offshore And Onshore .
EnvironmentalProductDeclarationOffshore and OnshoreSeamless Line PipeSolutionsBASED ON:CERTIFICATION N :ECO EPD REF.NO. :ISSUE DATE:VALID UNTIL:PCR 2012:01 (versions 2.3).Construction products andconstruction services.Multiple UN CPC codesS-P-00918000003942016/08/092024/09/18REVISON N :REVISION DATE:72019/10/16
Offshore and Onshore Seamless Line Pipe Solutions 2
General informationECO EPD REFERENCESEPD OWNER: TENARIS SA, 29 AVENUE DE LA PORTE-NEUVE, L2227 - LUXEMBOURGPROGRAM OPERATOR: THE INTERNATIONAL EPD SYSTEM VASAGATAN 15-17 SE - 111 20 STOCKHOLM SWEDENINDEPENDENT VERIFICATIONThis declaration has been developed referring to the International EPD System, following the General Programme Instructions;further information and the document itself are available at: www.environdec.com. EPD document valid within the followinggeographical area: Italy and other countries according to sales market conditions (North Africa and Europe).CEN standard EN 15804 served as the core PCR (PCR 2012:01 Construction products and Construction services, Version 2.3,2018-11-15)PCR review was conducted by: The Technical Committee of the International EPD System. Chair: Filippo Sessa.Contact via info@environdec.comIndependent verification of the declaration and data, according to EN ISO 14025 : 2010Third party verifier: ICMQ SpA, via De Castillia, 10 20124 Milano (www.icmq.it)EPD process certification(Internal)EPD verification(External)Accredited by: AccrediaEnvironmental declarations published within the same product category, though originating from different programs, may notbe comparable. In particular, EPDs of construction products may not be comparable if they do not comply with EN 15804.CONTACTSTenarisDalmine is available to release an Environmental Product Declaration for one specific product at the customer’s request.To get more information about this environmental declaration or about TenarisDalmineactivities please contact:Fabio Praolini (fpraolini@tenaris.com) Silvia Tosato (silviatosato@tenaris.com)Tel. 39 035.5603898Technical support to TenarisDalmine was provided by Life Cycle Engineering, Italy.(info@studiolce.it, www.lcengineering.eu).3 Offshore and Onshore Seamless Line Pipe Solutions
TenarisTenaris is the leading global manufacturerand supplier of tubular products andservices used in the drilling, completionand production of oil and gas and a leadingsupplier of tubular products and servicesused in process and power plants and inspecialized industrial and automotiveapplications.Tenaris prioritizes the health and safety ofits personnel, collaborators and visitors, thesatisfaction of its customers, the protectionof the environment and the development ofthe communities with which it interacts as anabsolute and integrated priority; the entireorganization is oriented toward achievingthese goals openly and transparently.Tenaris is committed to developing longterm sustainable business, preventingpollution and minimizing the environmentalimpact of its operations, making the mostefficient use of natural resources and energy.Offshore and Onshore Seamless Line Pipe Solutions 4
TenarisDalmineTenarisDalmine - the steel pipe operations ofTenaris in Italy - is the top Italian producerof seamless steel tubes for the energy,automotive and mechanical industries, withan annual production capacity of 950,000tons of finished products, , 5 plants, a steelshop and a 120 MW self-production powerplant which, as well as all TenarisDalmineAberdeenNiskuproduction sites, received both the ISO EN14001 and OHSAS 18001 certifications.As far as energy efficiency, TenarisDalminemills and its power plant received the ISOEN 50001 certification, the internationalstandard guaranteeing the use of proceduresdeveloped for a continuous improvementand an efficient energy management.EsbjergCopenhagenAksaiRed sfieldOklahoma lCedar SpringsWestwegoMisurataDammamMonterreyPoza RicaTamsaGuadalajaraCiudad del CarmenMexico CityDos BocasVillahermosa ComalcacoBasraBahrainNew DelhiDohaMumbaiHo Chi ioNeivaLubaMachachiNatalLimaCallaoKuala PIJDarwinBroomeRio das OstrasConfabRio de JaneiroSantiagoMaputoPerthSidercaVilla MercedesMontevideoSiatPunta Arenas5 Offshore and Onshore Seamless Line Pipe SolutionsManufacturing CentersService CentersR&D CentersCommercial Offices
Tenaris Offshore andOnshore Seamless Line PipeContinuing global oil and gas demand isdriving operators to extend their explorationefforts into deeper offshore waters and tapdifficult-to produce land reservoirs.To satisfy this demand, offshore operatorsneed advanced technology solutions tochallenges such as sour service, hightemperature/high-pressure (HT/HP)environments, and long-distance tiebacks indeep and ultra-deep water. Similar trends arealso present in the onshore business for longpipelines, sour service requirements, artic andartic alike environment as well as HP/HT.- Complete LP and Riser Package- Premium Connections- Coating (including corrosion resistance,flow assurance, concrete weight, andthermal insulation)- Ancillary (Anode Pad, Taper Joint,Buckling Arrestor, )- Hot Induction Bends- Welding & Multiple Jointing- Laser End Information Services- End Conditioning- Corrosion Resistant Alloys (clad, lined andsolid)With more than 200 line pipe projectssuccessfully delivered with ancillaryservices, Tenaris is able to offer a wide rangeof solutions, including:Offshore and Onshore Seamless Line Pipe Solutions 6
7 Offshore and Onshore Seamless Line Pipe Solutions
Scope and type of EPD The approach used in this EPD is “Cradle to gate with options” oneTABLE OF MODULESCONSTRUCTIONPROCESS STAGEBENEFITS ANDLOADS BEYONDTHE se - Recovery Recycling potentialReplacementB1DisposalRepairA5Waste processingMaintenanceA4TransportUseA3De- constructiondemolitionAssemblyA2Operational water useTransport from thegate to the siteA1Operational energy useManufacturingEND OF LIFE STAGETransportUSE STAGERaw material supplyPRODUCT STAGEB6B7C1C2C3C4DMNDMNDMNDMNDMNDMNDMND MND MND MND MNDSOFTWARE: SimaPro ver. 9.0.0.48 (www.pre.nl)MAIN DATABASE: Ecoinvent 2.2 and 3REPORT LCA: Life Cycle Assessment (LCA) for manufacturing of seamless line pipe with the EAF process - SURVEILLANCE report.GEOGRAPHICAL SCOPE OF THE EPD: World according to sales market conditions.TYPE OF EPD: Product EPDREFERENCE YEAR: 2018Environmental declarations published within the same product category, though originating from different programs, may not be comparable.Offshore and Onshore Seamless Line Pipe Solutions 8
Detailed product descriptionDetailed product descriptionTenaris provides complete tubular and services solutions packages for the most demanding operatorchallenges in oil & gas application. Solutions include:-Steel catenary, hybrid risers and top tension risersExport lines and flowlinesTubular components for subsea applicationsTubular components for structural applicationsPremium connectionsPipe End ConditioningLaser Ends Measurement ServicesCoatingINFORMATIONPRODUCT IDENTIFICATIONPRODUCT FEATURESPRODUCT PROPERTIESCOATING*MANUFACTURING PLANTLINE PIPELINE PIPE WITH LARGE DIAMETERC-Mn steel seamless pipe for on-shore and offshore C-Mn steel seamless pipe for on-shore and offshoreLP applicationsLP applicationsOD from 159 mm to 406 mm, WT up to 60 mmOD from 407 mm to 711 mm, WT up to 60 mmSteel grades and pipe properties according to maininternational standards (DNV OS F101, API 5L, ISO3183) and customer requirements.Steel grades and pipe properties according to maininternational standards (DNV OS F101, API 5L, ISO3183) and customer requirements.FBE 3 LPPFBE 3 LPPDalmineDalmine* The coating may vary in material and geometric characteristics as well as in its environmental burden.In this document a coating system composed of one internal layer of epoxy powder and three external layers of polypropylene isanalysed as it is one of the most utilized to protect pipes in aggressive environment.This solution is contributing 10% on total green house gases emission, other systems may lead to partial increase or reduction ofthis contribution.CONTENT DECLARATIONThe product here considered has the followingcomposition.THE MINIMUM CONTENT OFRECYCLED MATERIAL IS 88.4%,ACCORDING TO UNI EN ISO 140219 Offshore and Onshore Seamless Line Pipe Solutions2%ALLOY ELEMENTS1%OTHER ELEMENTS97%IRON
Manufacturing SpecificationDalmine plantSTEEL SHOPHEAT TREATMENTSThe furnace at the steel shop is loaded mostly by preselected scrap and pig iron (approx. 100 ton in 2 steps),which is melted with the heat generated by an electric arccreated between the electrode and the scrap and by the useof chemical energy coming from combustion processes(natural gas and coal).In order to obtain the required mechanical properties,heat treatments of normalizing or quenching & temperingare performed in different facilities depending on tubedimension.Once the slag has been removed around 95 tons of liquidsteel at a temperature of around 1,650 C are poured into theladle furnace, where secondary metallurgy is carried out.Vacuum degassing for special steels is performed.Continuous casting transforms liquid steel into roundsection solid bars with diameters between 148 and 395 mmfor subsequent rolling.All processes are controlled by an integrated systemincluding the furnace power management, the furnace fumesemission, the addition of ferro-alloys to reach the requiredchemical composition and the control of the castingparameters until the cut-to-length of the bars.MANDREL ROLLINGAfter passing through a rotary hearth furnace, the bars aretransferred to the hot rolling mill in order to carry out thepiercing process, thickness rolling and diameter sizing. Thepiercing process transforms the hot bar into a hollow: thebar turns due to the movement of two skewed opposingrollers.As a result of the internal tension generated, a hollow iscreated in the center of the bar, into which the piercing plugis introduced.A “hollow” with very thick walls is thereby produced.To transform the hollow into a tube with the specifieddimensions, the wall thickness must be reduced. Themandrel is inserted into the hollow and lamination takesplace between the rolls and the mandrel with a gradualreduction in thickness. The tube is then sent to the sizing,to set the final diameter and wall thickness according tocustomer’s requests.EXPANDER MILLMother pipes with an external diameter of 360 and 406 mmproduced by the continuous rolling mill are used for theproduction of big diameter pipes.After heating, the mother pipes are expanded through a crossrolling mill on a taper plug. The reduction in thickness iscompensated by the increase in the diameter. It can producetubes with an external diameter between 406 and 711 mm.Quench and tempering is the most commonly used heattreatment for medium-high steel grades and for demandingLP applications; the cooling phase from austenitizingtemperature can be performed with quenching head forthinner wall thickness or with more effective water tank incase of thicker wall.FINISHING & NON-DESTRUCTIVE TESTSTo guarantee the high quality of its material, Tenarisperforms a combination of non-destructive tests(ultrasound, flux leakage, Eddy current, magnetic particleinspections).TENARISDALMINEPOWER PLANTTenarisDalmine Thermal Power Plant is based ona combined cycle technology (energy and heat),counting on two 43MW natural gas turbines andone 41MW steam turbine.The Thermal Power Plant is able to produce almost900 GW per year, 70% is used to serve the TenarisDalmine energy need and 30% is sold in the freeenergy market, with a cycle performance of 51%vs an Italian energy park average of 40% and withthe highest environmental performance amongItalian thermal power plant of such dimension. Theremote heating network uses a part of the steamthat, instead of producing energy, is sent to heatexchangers which produce 90 C hot water.A special pipeline system provides hot water to thebuildings in the remote heating network, wherean exchanger gives heat to the building heatingsystem. Cooled water goes back to the ThermalPower Plant, where it is re-heated to the maximumtemperature before starting again the cycle.Offshore and Onshore Seamless Line Pipe Solutions 10
11 Offshore and Onshore Seamless Line Pipe Solutions
Environmental PerformanceLINE PIPE (OD: 159 406 mm)The detailed environmental performance (in terms of potential environmental impacts, use ofresources and waste generation) is presented for the three phases Upstream, Core and Downstream andrelated sub-phases (A1-A2-A3-A4). Construction installation (A5), use phase (B1 - B7) and end of life(C1 - C4) are modules not declared (MND).DECLARED UNIT (D.U.) The declared unit is 1 tonne (1000 kg) of fabricated steel product.ENVIRONMENTAL IMPACTSPOTENTIALENVIRONMENTAL IMPACTSUNITS / D.U.UPSTREAM PROCESSDOWNSTREAMPROCESSCORE PROCESSA1A2A3A4TOTALGWPkg CO2 eq6.78E 025.89E 017.96E 028.89E 011.62E 03ODPkg CFC 11eq1.30E-047.93E-061.22E-051.16E-051.62E-04APkg SO2 eq3.14E 003.83E-017.06E-011.97E 006.20E 00EPkg PO43- eq3.00E-016.80E-021.41E-011.79E-016.88E-01POCPkg C2H4 eq2.48E-011.04E-025.85E-026.08E-023.78E-01ADPEkg Sb 17E 047.91E 021.67E 031.19E 032.54E 04GWP Global warming potentialODP Depletion potential of the stratospheric ozone layerAP Acidification potential of land and waterEP Eutrophication potentialPOCP Formation potential of tropospheric ozone photochemical oxidantsADPE Abiotic depletion potential for non-fossil resourcesADPF Abiotic depletion potential for fossil resourcesOffshore and Onshore Seamless Line Pipe Solutions 12
RESOURCE USE PER DECLARED UNITUSE OF RENEWABLEMATERIAL RESOURCESUNITS / D.U.UPSTREAM PROCESSDOWNSTREAMPROCESSCORE PROCESSA1A2A3A4TOTALPEREMJ4.93E 021.09E 016.87E 012.10E 005.74E 02PERMMJ0.00E 000.00E 000.00E 000.00E 000.00E 00PERTMJ4.93E 021.09E 016.87E 012.10E 005.74E 02PENREMJ3.09E 048.58E 021.90E 031.21E 033.49E 04PENRMMJ2.32E 010.00E 008.81E 010.00E 001.11E 02PENRTMJ3.10E 048.58E 021.99E 031.21E 033.50E 04SMkg1.17E 030.00E 000.00E 000.00E 001.17E 03RSFMJ0.00E 000.00E 000.00E 000.00E 000.00E 00NRSFMJ0.00E 000.00E 000.00E 000.00E 000.00E 00FWm34.79E 001.29E-018.12E 001.09E-011.31E 01PERE Use of renewable primary energy excluding renewable primary energyresources used as raw materialsPERM Use of renewable primary energy resources used as raw materialsPERT Total use of renewable primary energy resourcesPENRE Use of non-renewable primary energy excluding non-renewable primaryenergy resources used as raw materialsPENRM Use of non-renewable primary energy resources used as raw materialsPENRT Total use of non-renewable primary energy resourcesSM Use of secondary raw materialsRSF Use of renewable secondary fuelsNRSF Use of non-renewable secondary fuelsFW Use of net fresh waterOUTPUT FLOWS AND WASTE CATEGORIES PER DECLARED UNITWASTE GENERATIONAND TREATMENTUNITS / D.U.UPSTREAM PROCESSDOWNSTREAMPROCESSCORE PROCESSA1A2A3A4TOTALHWDkg9.81E-030.00E 001.28E 010.00E 001.29E 01NHWDkg1.50E 030.00E 006.90E 000.00E 001.51E 03RWDkg0.00E 000.00E 000.00E 000.00E 000.00E 00CRUkg0.00E 001.00E 002.00E 003.00E 006.00E 00MFRkg1.13E 000.00E 001.83E 020.00E 001.84E 02MERkg0.00E 000.00E 000.00E 000.00E 000.00E 00EEEkg-4.82E 000.00E 000.00E 000.00E 00-4.82E 00EETkg-9.78E 000.00E 000.00E 000.00E 00-9.78E 00HWD Hazardous waste disposedNHWD Non-hazardous waste disposedRWD Radioactive waste disposedCRU Components for re-useMFR Materials for recyclingMER Materials for energy recoveryEEE Exported electrical energyEET Exported thermal energyThe environmental impacts associated with waste disposal to landfill and incineration are accounted in the indicatorsrelated to the potential environmental impact (page 12).13 Offshore and Onshore Seamless Line Pipe Solutions
Environmental PerformanceLINE PIPE (OD: 407 711 mm)The detailed environmental performance (in terms of potential environmental impacts, use ofresources and waste generation) is presented for the three phases Upstream, Core and Downstream andrelated sub-phases (A1-A2-A3-A4). Construction installation (A5), use phase (B1 - B7) and end of life(C1 - C4) are modules not declared (MND).DECLARED UNIT (D.U.) The declared unit is 1 tonne (1000 kg) of fabricated steel product.ENVIRONMENTAL IMPACTSPOTENTIALENVIRONMENTAL IMPACTSUNITS / D.U.UPSTREAM PROCESSDOWNSTREAMPROCESSCORE PROCESSA1A2A3A4TOTALGWPkg CO2 eq7.20E 026.19E 019.97E 028.89E 011.87E 03ODPkg CFC 11eq1.80E-048.27E-061.24E-051.16E-052.12E-04APkg SO2 eq3.23E 004.07E-018.20E-011.97E 006.42E 00EPkg PO43- eq3.31E-017.16E-021.69E-011.79E-017.51E-01POCPkg C2H4 eq2.69E-011.11E-026.17E-026.08E-024.03E-01ADPEkg Sb 85E 048.32E 021.72E 031.19E 033.22E 04GWP Global warming potentialODP Depletion potential of the stratospheric ozone layerAP Acidification potential of land and waterEP Eutrophication potentialPOCP Formation potential of tropospheric ozone photochemical oxidantsADPE Abiotic depletion potential for non-fossil resourcesADPF Abiotic depletion potential for fossil resourcesOffshore and Onshore Seamless Line Pipe Solutions 14
RESOURCE USE PER DECLARED UNITUSE OF RENEWABLEMATERIAL RESOURCESUNITS / D.U.UPSTREAM PROCESSDOWNSTREAMPROCESSCORE PROCESSA1A2A3A4TOTALPEREMJ5.57E 021.21E 017.07E 012.10E 006.42E 02PERMMJ0.00E 000.00E 000.00E 000.00E 000.00E 00PERTMJ5.57E 021.21E 017.07E 012.10E 006.42E 02PENREMJ3.54E 049.07E 021.94E 031.21E 033.94E 04PENRMMJ7.71E 000.00E 001.07E 020.00E 001.14E 02PENRTMJ3.54E 049.07E 022.05E 031.21E 033.95E 04SMkg1.18E 030.00E 000.00E 000.00E 001.18E 03RSFMJ0.00E 000.00E 000.00E 000.00E 000.00E 00NRSFMJ0.00E 000.00E 000.00E 000.00E 000.00E 00FWm34.95E 001.39E-018.14E 001.09E-011.33E 01PERE Use of renewable primary energy excluding renewable primary energyresources used as raw materialsPERM Use of renewable primary energy resources used as raw materialsPERT Total use of renewable primary energy resourcesPENRE Use of non-renewable primary energy excluding non-renewable primaryenergy resources used as raw materialsPENRM Use of non-renewable primary energy resources used as raw materialsPENRT Total use of non-renewable primary energy resourcesSM Use of secondary raw materialsRSF Use of renewable secondary fuelsNRSF Use of non-renewable secondary fuelsFW Use of net fresh waterOUTPUT FLOWS AND WASTE CATEGORIES PER DECLARED UNITWASTE GENERATIONAND TREATMENTUNITS / D.U.UPSTREAM PROCESSDOWNSTREAMPROCESSCORE PROCESSA1A2A3A4TOTALHWDkg6.94E-030.00E 002.08E 010.00E 002.08E 01NHWDkg1.06E 030.00E 007.11E 000.00E 001.07E 03RWDkg0.00E 000.00E 000.00E 000.00E 000.00E 00CRUkg0.00E 001.00E 002.00E 003.00E 006.00E 00MFRkg1.15E 000.00E 002.13E 020.00E 002.14E 02MERkg0.00E 000.00E 000.00E 000.00E 000.00E 00EEEkg-6.87E 000.00E 000.00E 000.00E 00-6.87E 00EETkg-1.39E 010.00E 000.00E 000.00E 00-1.39E 01HWD Hazardous waste disposedNHWD Non-hazardous waste disposedRWD Radioactive waste disposedCRU Components for re-useMFR Materials for recyclingMER Materials for energy recoveryEEE Exported electrical energyEET Exported thermal energyThe environmental impacts associated with waste disposal to landfill and incineration are accounted in the indicatorsrelated to the potential environmental impact (page 12).15 Offshore and Onshore Seamless Line Pipe Solutions
Calculation RulesAccording to the PCR 2012:01 v. 2.2 the main activities are listed and divided n three subsystems:UPSTREAM Process, CORE Module, Downstream ProcessA1UPSTREAMProcessA2 A3COREProcessA4DOWNSTREAMProcessLCA METHODOLOGYThe environmental burden of the product has been processed according to the general rules of the EPD (Environmental Product Declaration) International Programme and the N.PCR 2012:01 (versions 2.3), construction products andconstruction services - Multiple UN CPC codes (Cradle to gate with options).This declaration is based on the application of Life Cycle Assessment (LCA) methodology to the whole life-cycle system. Seamless pipe product at plant level, was described by using specific data from Dalmine manufacturing facilityfor year 2018.Packaging used for product delivery and pollutant concentration in wastewater is considered negligible in accordancewith the cut-off criteria established in PCR 2012:01 v.2.3 (ch. 7.6).Customized LCA questionnaires were used to gather in-depth information about all aspects of the production system(for example, raw materials specifications, pre-treatments, process efficiencies, air emissions, waste management),ultimately providing a complete picture of the environmental burden of the system:Raw materials supply (A1), Transport (A2), Manufacturing (A3) and transport to final destination was considered (A4).Offshore and Onshore Seamless Line Pipe Solutions 16
Upstream Process(A1 Raw material supply)A1UPSTREAMProcessPOST AND PRE-CONSUMERSTEEL SCRAP COLLECTIONA2 A3COREProcessA4DOWNSTREAMProcessGENERATION OF ELECTRICITYFROM ITALIAN GRIDSPECIFIC SECONDARYMATERIALSPRE-TREATMENTS,WHERE APPROPRIATEEXTRACTION AND PROCESSINGOF RAW MATERIALS17 Offshore and Onshore Seamless Line Pipe SolutionsEXTRACTION AND PROCESSING OFNATURAL GAS FOR CORE ENERGY DEMAND
Core Process(A2 Transportation A3 Manufacturing)A1UPSTREAMProcessA2 A3COREProcessA4DOWNSTREAMProcessNATURAL GAS COMBUSTION FORENERGY PRODUCTIONTREATMENT PROCESSOF WASTE GENERATED BY THEMANUFACTURING PROCESSMANUFACTURING PROCESSINCLUDING STEEL MILL, ROLLINGMILL, FAS EXPANDER, THERMALTREATMENT AND FINISHINGPROCESSANCILLARYPRODUCTIONOffshore and Onshore Seamless Line Pipe Solutions 18
Downstream Process(A4 Transport to final destination)A1UPSTREAMProcessTRANSPORT TO CUSTOMERS(general market average) :WORLD (88%):DISTANCE RANGE 10 000 km19 Offshore and Onshore Seamless Line Pipe SolutionsA2 A3COREProcessA4DOWNSTREAMProcessITALY (10%):DISTANCE RANGE 600 kmEUROPE (2%):DISTANCE RANGE 1 200 km
Additional InformationOther environmental characteristics of Dalmine plant are:1. TenarisDalmine has a steel scrap yard forscraps feeding the EAF1. The area is completelypaved and has a water collection systemconnected to the internal water treatment plant.Steel scraps are here separated in differentclasses to allow the most efficient charge bucketpreparation.2. TenarisDalmine has a slag milling andseparation system: the whole system allows toconsider slags as standard construction materials(EC marking available for applications as,cement products, bituminous conglomerates,road embankments).3. TenarisDalmine has finalized the EAF airemission catchment and treatment systemrevamping that will double the aspirationcapacity over the EAF achieving the upper limitsprovided by BREF2.4. TenarisDalmine has installed a new dustcollector system at rolling mill in 2017. Thisis able to reduce up to 5 times the dust airemissions.5. TenarisDalmine has a prevention andreduction system for PCDD/F3 emission inatmosphere: the equipment has been runningsince 2010 with concentrations at stack lowerthan limits imposed by EU for 2016 ( 0,1 ngITEQ4/Nm3 on all existing stacks)6. TenarisDalmine in 2010 installed low-NOXregenerative burners in its main rotary heatingfurnace (RHF FTM5); this allowed the plantto increase the production capacity withoutincreasing gas consumption and NOx emissions.An HRSG6 boiler was recently installed in orderto use the RHF FTM fumes to generate steamfor industrial use.7. TenarisDalmine has a closed loop recirculatingsystem for industrial water. Filtering and oilseparation allow water reuse, water consumptionis therefore limited to evaporation.8. TenarisDalmine is continuously aiming toimprove its process and product environmentalperformance. The ISO 14001 compliantEnvironmental Management System maingoals are: periodic renovation of air and wateremission systems, continuous improvement ofinstalled monitoring systems, periodic trainingand communication for the operators onenvironmental management.9. The minimum content of recycled material is88.4%, according to UNI EN ISO 140211 EAF Electric Arc Furnace2 BREF Best available techniques REFerence document3 PCDD/F Poly Chlorinated Di-benzo Dioxins/Furans4 TEQ Toxic Equivalency Factor5 RHF FTM Rotary Hearth Furnace - Medium Pipe Mill6 HRSG Heat Recovery Steam GeneratorOffshore and Onshore Seamless Line Pipe Solutions 20
21 Offshore and Onshore Seamless Line Pipe Solutions
www.tenaris.com
international standards (DNV OS F101, API 5L, ISO 3183) and customer requirements. Steel grades and pipe properties according to main international standards (DNV OS F101, API 5L, ISO 3183) and customer requirements. COATING* FBE 3 LPP FBE 3
Automated Import System –AIS Getting to know the AIS declaration names Declaration Name Declaration Description H1 Declaration for release for free circulation & for end-use H2 Declaration for customs warehousing H3 Special procedure declaration for temporary admission H4 Declaration for inward processing H5 Declaration for the introduction of goods in the
services necessary to construct and maintain the Arctic/Offshore Patrol Ships (AOPS), Joint Support Ships (JSS), Polar Icebreaker, and Offshore Fisheries/ Offshore Oceanographic Science . National Shipbuilding Procurement Strategy OFSV Offshore Fisheries Science Vessel OOSV Offshore Oceanographic Science Vessel . Recent Ice-Classed Offshore .
Offshore wind farm status GW 10.4 7.7 2.6 2.3 1.7 0.3 25.0 % 42% 31% 10% 9% 7% 1% 100% UK Germany Netherlands Belgium Denmark Rest of Europe Total Turbines 2,292 1,501 537 399 559 112 5,400 Triton Knoll west offshore substation and jackup vessel Neptune 04 Offshore wind operational report 2020 05 Offshore wind operational report 2020 Offshore .
7 Declaration of Matthew David Eyles (America's Health 086-093 Insurance Plans, Inc.) 8 Declaration of Alfred J. Gobeille (VT) 094-098 9 Declaration of Frederick Isasi (Families USA Foundation) 099-110 10 Declaration of Jennifer Ken,t (CA) 111-113 11 Declaration of Mila Kofman (DC) 114-118 12 Declaration of Jennifer Lee (VA) 119-122
DECLARATION HOLDER Owens Corning DECLARATION NUMBER 12CA25418.102.1 DECLARED PRODUCT EcoTouch Kraft-faced Insulation. Manufactured by Owens Corning in the United States and Canada. REFERENCE PCR PCR Building Envelope Thermal Insulation (ULE 2011) DATE OF ISSUE October 29, 2012 PERIOD OF VALIDITY 5 years CONTENTS OF THE DECLARATION
Offshore Wind Farm Worker Safety, author. Worker health and safety on offshore wind farms / Committee on Offshore Wind Farm Worker Safety. pages cm — (Transportation research board special report ; 310) ISBN 978-0-309-26326-9 1. Offshore wind power plants—Employees—Health and hygiene—United States. 2.
An Offshore Wind Energy Roadmap3; Wind Farm Site Decisions and permits issued under the Offshore Wind Energy Act; If necessary, subsidies under the Stimulation of Sustainable Energy Production Decision; and A Development Framework for the development of offshore wind energy, and that of the offshore grid in particular.
Renewable Energy Sources Act (EEG). In 2020 the "Offshore Wind Energy Act (/51/) was amended. UK had its first offshore wind farm installed off Northumberland coast in 2000 /17/ and now their "Offshore wind Sector Deal" innovat e and scale the offshore wind business largely /20/. UK government has also their
