飞控中英文菜单说明2x7-A4打印EN - HSDJETSUSA
MFC-2085 MULTI-FUNCTION FLIGHT CONTROLLER SYSTEM E N G L I S H M E N U INTRODUCTION & QUICK ENTRANCE Want to learn more about the productvideo, pictures, and other matters of attention Please log in: www.hsdrc.com Product Guarantee Condition During the production process, HSDJETS has conducted a series of rigorous tests on each MFC 2085 Multi-function Flight Controller System. We always attach great importance to the maintenance of the highest quality standards, which is reason we can give all our MFC-2085 products 3 months of assurance and the effective from the initial date of purchase. The warranty covers the material failure, which will be replaced by us free of charge. We wish to emphasize in particular that we reserve the right to replace if economic reasons can not be repaired. The purchase receipt and invoice is the proof of after-sales service. Free maintenance is limited to the warranty period only. Misuse and damage, such as antipolarity, overvoltage and humidity effects, which apply to failures due to server wear or excessive vibration, are not in the services options. Product quality assurance and after-sales service does not include any additional claims. HSDJETS only warrants that the MFC-2085 is repaired or replaced and will not be liable for any other loss or damage.
Product Features 01. Two-way power management system 2S, 7.4 V input 08. With the function of adjusting the neutral position of voltage design, single way 20A maximum electric current the servo, includes ailerons, elevator, directions and flaps. output, can meet the requirements of most aircraft in the 09. The stroke of ailerons, elevator, directions and flaps today's market, and it has a function that the battery can be adjusted by MFC-1085 multi-function flight automatically seamless switches. controller. 02. 0.96 inch OLED display screen, scroll menu preview 10. With flight trajectory offset system. According to the internal settings. The main interface can display battery characteristics of the aircraft, can set the elevator offset voltage value, power on time and other information. of the accelerator and flap to offset the curve and let it 03. The intelligent landing gear timing sequence system, adjust arbitrarily. can adjust the operating current of the landing gear and 11. Supporting tail lighting system, with the adjusted of can set one key to retractable cover plate and landing gear. the accelerator the lighting effect can be changed. 12. Supporting S-UBS bus(lines) functions, arbitrarily set 04. Supporting electric brake control function and slow 8 function channels, one signal line to complete the start brake, which make the aircraft taxiing more stable required functions. 05. With lighting control system, it can be turned on and 13. The back line design. The line from the bottom of the off through the setting of remote control system installation position, the upper surface only two UBEC programming, and five lighting flashing mode are power input socket, no see other signal lines in surface, arbitrarily called. easy to install, simple and beautiful. 06. With the landing gear cover control system, it can 14. The output voltage of the receiver can be adjusted by extend or shorten the closing or opening time of the cover programming. Two types of voltage choices can be used. plate, it can also set the secondary action of the cover The receiver and the steering gear can adjust the voltage plate, and it can also adjust the servo stroke of the cover range separately. plate. 15. Simultaneously compatible with electric landing gear 07. Can set the positive and negative reversals of the servo, system and pneumatic landing gear system. includes ailerons, elevator, directions, flaps, and covers. Product Specification * Working voltage : 7.4 V，2S for DC. (battery input) * Navigation lights/Landing gear lights voltage：3.2 V * Receiver Output voltage：6〜7.4 V adjustable * Servo voltage：6〜7.4 V adjustable * Electric air valve voltage：6 V * Electric landing gear voltage：7.4 V * Electromagnetic Brake voltage：7.4 V * Combustible lamp voltage：7.4 V * Working temperature range: -5 〜 75 * Size : L 4.29 W 2.48 H 1.18 inch * Weight : 106 g / 3.74 oz m m 30 in H . 1 8 / 1
Panel and operation instructions ⑥ Battery input port ① OLED Display ② Enter key ③ Exit / One key retractable ④ Selection (down) ⑤ Selection (up) ( for 2S Li-Po only) ⑦ Battery input port ( for 2S Li-Po only) ⑧ Electric indicator lamp ⑨ Electric indicator lamp Operation tips: When the ⑥ interface connected to the battery: Press the ② and ④ combination button for 3 secondsat the same time to start up. ① ⑧ ⑨ When the ⑦ interface connected to the battery: Press the ② and ⑤ combination button for 3 secondsat the same time to start up. ② ④ ⑤ ③ ⑦ ⑥ Note: the combination button is only applicable to the corresponding unilateral battery. Long press the button ② and ③ for 3 seconds to shut down. Manual Test Mode Elec. LG: M1 Status Ready Manual Test Mode Elec. LG: M1 Status Gear Up Manual Test Mode Elec. LG: M1 Status Gear Down Long press the button ② for 3 seconds to enter the menu. Long press the button ③ for 3 seconds to One key retractable. Press the button ② exit one key retractable . Screen instructions BAT 1 BAT 2 Runtime Dual battery voltage and Press this button to display quantity display the system running time Receiver AUX Nav.Light Throttle CP Flap CP OFF LG Disable Wh.Brake Use Elec. Brake Nav.Light Alway On 6.0V 6.0V 7.4V OFF Click this button Click this button will display will display The interface displays shortcut key
Output & Input port Description AUX1-1：Aileron AUX1-2：Aileron AUX2-1：Elevator AUX2-2：Elevator AUX3-1：Rudder AUX3-2：Rudder AE-05：Gear Lock 2（Air Electronics） AE-04：Gear Lock 1（Air Electronics） AE-03：Door 3（Air Electronics） AE-02：Door 2（Air Electronics） AE-01：Door 1（Air Electronics） AV-02：Brake valve（Air） AV-01：Landing gear valve（Air） AUX4-1：Flap AUX4-2：Flap AUX5-1：Spare AUX5-2：Spare AUX6：Throttle AUX7：Spare AUX8：Spare AE-05 AE-04 AE-03 AE-02 AE-01 AV-02 AV-01 E B - 0 2：E l e c t r o n i c s B ra k e 2 E B - 0 1：E l e c t r o n i c s B ra k e 1 E G - 0 3：E l e c t r o n i c s L a n d i n g g e a r 3 E G - 0 2：E l e c t r o n i c s L a n d i n g g e a r 2 E G - 0 1：E l e c t r o n i c s L a n d i n g g e a r 1 EB-02 EB-01 EG-03 EG-02 EG-01 L01：Afterburner light L02：Afterburner light L03：Navigation light L04：Navigation light L05：Navigation light L06：Navigation light L07：Navigation light L08：Navigation light L09：Navigation light L10：Navigation light L11：Navigation light L12：Navigation light L13：Landing gear light L14：Landing gear light L15：Landing gear light R-01：S-BUS * R-02：S-BUS * R-03：Landing gear signal input R-04：Brake signal input R-05：Navigation light signal input R-06：Afterburner light signal input R-07：AUX-1 Aileron Signal Input R-08：AUX-2 Elevator Signal Input R-09：AUX-3 Rudder Signal Input R-10：AUX-4 Flap Signal Input R-11：AUX-5 Spare Signal Input L01 L02 L03 L04 L05 L06 L07 L08 L09 L10 L11 L12 L13 L14 L15 AUX1-1 AUX1-2 AUX2-1 AUX2-2 AUX3-1 AUX3-2 AUX4-1 AUX4-2 AUX5-1 AUX5-2 AUX6 AUX7 AUX8 R-12：AUX-6 Throttle Signal Input R-13：AUX-7 Spare Signal Input R-14：AUX-8 Spare Signal Input *R01 & R02 is S-Bus signal parallel interface R01 R02 R03 R04 R05 R06 R07 R08 R09 R10 R11 R12 R13 R14 *This patch cord includes conventional patch cord and S-BUS patch cord
Menu System Setting 1.Power Setting 2.AUX1 / Aileron 3.AUX2 / Elevator System Setting 1.Power Setting 2.AUX1 / Aileron 3.AUX2 / Elevator Power Setting 1.Receiver 2.AUX / Servo 3.Nav.Light / E-Gear Receiver Power OFF 6V 7.4V Power Setting 1.Receiver 2.AUX / Servo 3.Nav.Light / E-Gear Servo Power OFF 6V 7.4V Power Setting 1.Receiver 2.AUX / Servo 3.Nav.Light / E-Gear Nav.Light / E-Gear Power OFF 7.4V AUX1 / Aileron 1.AUX1-1 2.AUX1-2 AUX1-1 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX1-1 Reverse ON OFF AUX1-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX1-1 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX1-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX1-1 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX1-1 Setting 4.Sub-trim Set AUX1-1 Sub-trim 0 % AUX1 / Aileron 1.AUX1-1 2.AUX1-2 AUX1-2 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX1-2 Reverse ON OFF AUX1-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX1-2 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX1-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX1-2 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX1-2 Setting 4.Sub-trim Set AUX1-2 Sub-trim 0 %
System Setting 1.Power Setting 2.AUX1 / Aileron 3.AUX2 / Elevator AUX2 / Elevator 1.AUX2-1 2.AUX2-2 AUX2-1 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX2-1 Reverse ON OFF AUX2-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX2-1 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX2-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX2-1 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX2-1 Setting 4.Sub-trim Set AUX2-1 Sub-trim 0 % AUX2 / Elevator 1.AUX2-1 2.AUX2-2 AUX2-2 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX2-2 Reverse ON OFF AUX2-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX2-2 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX2-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX2-2 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX2-2 Setting 4.Sub-trim Set AUX2-2 Sub-trim 0 % System Setting 4.AUX3 / Rudder 5.AUX4 / Flap 6.AUX5 AUX3 / Rudder 1.AUX3-1 2.AUX3-2 AUX3-1 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX3-1 Reverse ON OFF AUX3-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX3-1 Travel 1 30 % Note: the default stroke percentage is different in different models!
AUX3-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX3-1 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX3-1 Setting 4.Sub-trim Set AUX3-1 Sub-trim 0 % AUX3 / Rudder 1.AUX3-1 2.AUX3-2 AUX3-2 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX3-2 Reverse ON OFF AUX3-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX3-2 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX3-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX3-2 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX3-2 Setting 4.Sub-trim Set AUX3-2 Sub-trim 0 % System Setting 4.AUX3 / Rudder 5.AUX4 / Flap 6.AUX5 AUX4 / Flap 1.AUX4-1 2.AUX4-2 AUX4-1 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX4-1 Reverse ON OFF AUX4-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX4-1 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX4-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX4-1 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX4-1 Setting 4.Sub-trim Set AUX4-1 Sub-trim 0 %
AUX4 / Flap 1.AUX4-1 2.AUX4-2 AUX4-2 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX4-2 Reverse ON OFF AUX4-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX4-2 Travel 1 30 % Note: the default stroke percentage is different in different models! AUX4-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX4-2 Travel 2 30 % Note: the default stroke percentage is different in different models! AUX4-2 Setting 4.Sub-trim Set AUX4-2 Sub-trim 0 % System Setting 4.AUX3 / Rudder 5.AUX4 / Flap 6.AUX5 AUX5 1.AUX5-1 2.AUX5-2 AUX5-1 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX5-1 Reverse ON OFF AUX5-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX5-1 Travel 1 AUX5-1 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX5-1 Travel 2 AUX5-1 Setting 4.Sub-trim Set AUX5-1 Sub-trim 30 % 30 % 0 % AUX5 1.AUX5-1 2.AUX5-2 AUX5-2 Setting 1.Reverse 2.Travel 1 3.Travel 2 Set AUX5-2 Reverse ON OFF AUX5-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX5-2 Travel 1 AUX5-2 Setting 1.Receiver 2.Travel 1 3.Travel 2 Set AUX5-2 Travel 2 30 % 30 %
AUX5-2 Setting 4.Sub-trim Set AUX5-2 Sub-trim 0 % System Setting 7.Throttle CP 8.Flap CP 9.Elec.Landing Gear System Setting 7.Throttle CP 8.Flap CP 9.Elec.Landing Gear System Setting 7.Throttle CP 8.Flap CP 9.Elec.Landing Gear Throttle CP 1.State 2.Start Point 3.AUX2 CP Set Throttle CP State ON OFF Throttle CP 1.State 2.Start Point 3.AUX2 CP Set Start Point Throttle CP 1.State 2.Start Point 3.AUX2 CP Set AUX2 CP Flap CP 1.State 2.AUX2 CP 3.CP Speed Set Flap CP State ON OFF Flap CP 1.State 2.AUX2 CP 3.CP Speed Set AUX2 CP Flap CP 1.State 2.AUX2 CP 3.CP Speed Set CP Speed 10 % 0 % 1 Set Elec.Gear Mode OFF M3 M1 M4 M2 Elec.Landing Gear 1.Work Mode 2.Delay 3.Door 1 Set Gear Delay Elec.Landing Gear 4.Door 2 5.Door 3 6.Door speed Special note: When this feature is turned on: *The flap is needed to define as AUX4 0 % Elec.Landing Gear 1.Work Mode 2.Delay 3.Door 1 Elec.Landing Gear 1.Work Mode 2.Delay 3.Door 1 Special note: When this feature is turned on: *The throttle is needed to define as AUX6 *The elevator is needed define as AUX2 3.0(sec) Gear Door 1.Reverse 2.Travel angle Set Door 1 Reverse ON OFF Gear Door 1.Reverse 2.Travel angle Set Door 1 Travel Gear Door 1.Reverse 2.Travel angle Set Door 2 Reverse ON OFF 90(degree)
Elec.Landing Gear 4.Door 2 5.Door 3 6.Door speed Elec.Landing Gear 4.Door 2 5.Door 3 6.Door speed Gear Door 1.Reverse 2.Travel angle Set Door 2 Travel Gear Door 1.Reverse 2.Travel angle Set Door 3 Reverse ON OFF Gear Door 1.Reverse 2.Travel angle Set Door 3 Travel 90(degree) 90(degree) Set Door Speed 10 Elec.Landing Gear 7.Gear Lock 8.Gear Current 1 9.Gear Current 2 Set Gear Lock ON OFF Elec.Landing Gear 7.Gear Lock 8.Gear Current 1 9.Gear Current 2 Set Gear Current 1 Elec.Landing Gear 7.Gear Lock 8.Gear Current 1 9.Gear Current 2 Set Gear Current 2 Elec.Landing Gear 10.Gear Current 3 Set Gear Current 3 500(mA) 500(mA) 500(mA) System Setting 10.Air Landing Gear 11.Navigation Light 12.Afterburner Light System Setting 10.Air Landing Gear 11.Navigation Light 12.Afterburner Light Air Landing Gear 1.Work Mode 2.Delay 3.Gear Lock Set Air Gear Mode OFF M3 M1 M2 Air Landing Gear 1.Work Mode 2.Delay 3.Gear Lock Set Gear Delay 3.0(sec) Air Landing Gear 1.Work Mode 2.Delay 3.Gear Lock Gear Lock ON OFF Light Setting 1.Work Mode 2.Light CH 1 3.Light CH 2 Set Nav. Light Mode Alway On User Control Note: A radio transmitter channel can be set to control the turn on or off.
System Setting 10.Air Landing Gear 11.Navigation Light 12.Afterburner Light System Setting 13.Wheel Brake 14.S-BUS Setting 15.Factory Reset Light Setting 1.Work Mode 2.Light CH 1 3.Light CH 2 Set Light CH 1 Mode S1 S4 S2 S5 S3 Light Setting 1.Work Mode 2.Light CH 1 3.Light CH 2 Set Light CH 2 Mode S1 S4 S2 S5 S3 Light Setting 4.Light CH 3 5.Light CH 4 6.Light CH 5 Set Light CH 3 Mode S1 S4 S2 S5 S3 Light Setting 4.Light CH 3 5.Light CH 4 6.Light CH 5 Set Light CH 4 Mode S1 S4 S2 S5 S3 Light Setting 4.Light CH 3 5.Light CH 4 6.Light CH 5 Set Light CH 5 Mode S1 S4 S2 S5 S3 Set Afterburner Light ON OFF Wheel Brake Setting 1.Brake Selection 2.Wheel Air Brake 3.Wheel Elec. Brake Set Brake Selection Air Brake Elec. Brake Wheel Brake Setting 1.Brake Selection 2.Wheel Air Brake 3.Wheel Elec. Brake Set Air Brake Mode Normal Pulse Wheel Brake Setting 1.Brake Selection 2.Wheel Air Brake 3.Wheel Elec. Brake Elec. Wheel Brake 1.L-Wheel Strength 2.R-Wheel Strength 3.Gradual Time L-Wheel Strength Elec. Wheel Brake 1.L-Wheel Strength 2.R-Wheel Strength 3.Gradual Time R-Wheel Strength Elec. Wheel Brake 1.L-Wheel Strength 2.R-Wheel Strength 3.Gradual Time Set Gradual Time Elec. Wheel Brake 4.Gradual Start Point Gradual Start Point 100% 100% 0(sec) 20%
System Setting 13.Wheel Brake 14.S-BUS Setting 15.Factory Reset S-BUS Setting 1.AUX 1 CH 2.AUX 2 CH 3.AUX 3 CH Set AUX 1 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 1 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 1.AUX 1 CH 2.AUX 2 CH 3.AUX 3 CH Set AUX 2 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 2 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 1.AUX 1 CH 2.AUX 2 CH 3.AUX 3 CH Set AUX 3 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 3 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 4.AUX 4 CH 5.AUX 5 CH 6.AUX 6 CH Set AUX 4 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 4 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 4.AUX 4 CH 5.AUX 5 CH 6.AUX 6 CH Set AUX 5 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 5 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 4.AUX 4 CH 5.AUX 5 CH 6.AUX 6 CH Set AUX 6 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 6 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 7.AUX 7 CH 8.AUX 8 CH 9.A/B Light CH Set AUX 7 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 7 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 7.AUX 7 CH 8.AUX 8 CH 9.A/B Light CH Set AUX 8 CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set AUX 8 CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2
System Setting 13.Wheel Brake 14.S-BUS Setting 15.Factory Reset System Setting 16.Product Info. S-BUS Setting 7.AUX 7 CH 8.AUX 8 CH 9.A/B Light CH Set A/B Light CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set A/B Light CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 10.Nav. Light CH 11.Wheel Brake CH 12.Landing Gear CH Set Nav. Light CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set Nav. Light CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 10.Nav. Light CH 11.Wheel Brake CH 12.Landing Gear CH Set Wheel Brake CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set Wheel Brake CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 S-BUS Setting 10.Nav. Light CH 11.Wheel Brake CH 12.Landing Gear CH Set Landing Gear CH N/A CH3 CH1 CH4 CH2 CH5 CH6 CH9 CH7 CH10 Set Landing Gear CH CH8 CH11 CH12 CH15 CH13 CH16 CH14 DG1 DG2 Factory Reset Long press ‘ENTER’ to confirm (5) Factory Reset Long press ‘ENTER’ Done to confirm (5)! Product Information HSDWP01 www.hsdrc.com
Sequential action description Model 1 Model 2 Model 3 Model 4 D1〜D3 - Open D1〜D3 - Open D1〜D3 - Open D1〜D3 - Open Delay - xx Sec Delay - xx Sec Delay - xx Sec L/G - Down L/G - Down L/G - Down Delay - xx Sec Delay - xx Sec Delay - xx Sec L/G - Lock L/G - Lock L/G - Lock L/G - Lock Door 1 - Close Door 1 - Close D1〜D2 - Close L/G - Unlock Door 1 - Open Door 1 - Open D1〜D2 - Open L/G - Unlock L/G - Unlock L/G - Unlock Delay - xx Sec Delay - xx Sec Delay - xx Sec L/G - Up L/G - Up L/G - Up Delay - xx Sec Delay - xx Sec Delay - xx Sec D1〜D3- Close D1〜D3 - Close D1〜D3 - Close Delay - xx Sec L/G - Down Delay - xx Sec Delay - xx Sec L/G - Up Delay - xx Sec D1〜D3- Close
Installation Diagram Air landing gear system (AV-01 & AV-02) Air Door System (AE-01〜05) Electric Door System (AE-01〜05) Aileron(AUX-1) Electric landing gear System (EB-01〜02 & ER-01〜02) Elevator(AUX-2) Rudde(AUX-3) Navigation Light (L-03〜L-12) Flap(AUX-4) Throttle(AUX-6) Gear Light (L-13〜L-15) S-BUS / S-BUS 2 / PWM 8 Afterburner Light (L-01 & L-02)
Packing list Signal line 8 Selection1 PWA2 12mm Screw 4 Manual 1 Selection2 MFC-2085 1 T Plug Power Wire 2 www.hsdrc.com XT60 Plug Power Wire 2 www.hsdgo.com hsd@hsdjetshuangsai.com Company address ：HSDIndustry Park, Aigang Industry District, Huaide, Humen Town, Dongguan City, Guangdong Province,China （Post：523926） Production address ：Building F6, Standardized Factory Buildings , Xixiu Industrial Park, Xixiu District, Anshun City, Guizhou Province,China (Post：561099) Copyright HSDJETS, All Rights Reserved. Designed by HSDJETS. Printed & Made in China 2019.07
MFC-2085 ENGLISH MENU INTRODUCTION & QUICK ENTRANCE . Manual Test Status Mode Press the button ② exit one key retractable . L01：Afterburner light L02： Afterburner light L03：Navigation light L04：Navigation light L05：Navigation light L06：Navigation light L07：Navigation light
74 spoke wheels & spoke wheel assemblies wheel bearing cups part no.dimensions inner outer brake size webb no.comments 15 inch spoke wheel with 12-1/4x7-1/2 drum. 1133915 15 i nch 3 spoke hm218210 hm212011 121/4x71/2 70159cca non-abs 1533915 15 i nch 3 spoke hm218210 hm212011 12 1/4x7 /2 70159ccat abs 20 inch spoke wheel with 16-1/2x7 drum. 1032765 20 inch 5 spoke 653 hm212011 161/2x7 85203gca .
2x7 Matrix Plate, Straight SP-2630 2x7 Matrix Plate, Curved SP-2631 4-Hole Straight Plate 43-1005 6-Hole Straight Plate with Gap SP-2703 7-Hole Straight Plate 43-1007 16-Hole Straight Plate 43-1016 16-Hole Straight Plate 42-1016. PLATES – SILVER. 6-Hole Double Y Plate, Small SP-2705. MANDIBLE
Lot de trois miniatures : "Portrait d'une dame de qualité" aquarelle sur papier. On y joint deux "Portraits d'hommes" sur papier ovale. L'un est signé Jungbluth et daté 1839. Epoque: XIXème. (Petits *). Dimensions: /-6x5cm à 10,2x7,7cm. Lot 13 600 800 ZAMPI
Level 4: 7, 8,12 times tables j order of difficulty . You should now know your{2}times table. Try these questions to make sure. 2x9 2x4 2x6 2x1 2x2 2x7 2x3 2x10 2x5 2x8 When you have completed this book, ask your teacher to test you on your 2 times table. I know my _2J times table CD CO CO CD Times Table Booklet . Continue .File Size: 1MB
Business Cards Our high quality printing ensure Business Cards stand the test of time. 2x3.5 and 2x7 folded cards available Sold in sets of 100 Classic Felt, Premium Bamboo, Premium Cotton, 100% Recycled, Smooth, Linen, and Pearl press paper available Rep Cards A lot like business
Business Cards Our high quality printing and protective laminates ensure Business Cards stand the test of time. 2x3.5 and 2x7 folded cards available Sold in sets of 100 Classic Felt, Premium Bamboo, Premium Cotton, 100% Recycled, Smooth, Linen, an
Each workout consists of two different circuits repeated twice each. In each circuit, you will repeat 4 different exercises for 7 minutes, as many times as possible. Don't stop before your timer stops. Between each circuit, rest 30-90 seconds. Alternate between circuit #1 and #2. Repeat both circuits for two rounds each (2x7 minutes
"Administrim Publik" I. OFRIMII PROGRAMEVE TË STUDIMIT Standardi I.1 Institucioni i arsimit të lartë ofron programe studimi të ciklit të dytë “Master profesional” në përputhje me misionin dhe qëllimin e tij e që synojnë ruajtjen e interesave dhe vlerave kombëtare. Kriteret Vlerësimi i ekspertëve Kriteri 1. Institucioni ofron programe studimi që nuk bien ndesh me interesat .
