3 Phase Disc Separator - PRWeb
3 Phase Disc Separator （Light Liquid, Heavy Liquid & Solids Separation） 20/Feb/2020
Disc Separator 3 Phase Separation Brief Introduction GN 3 phase disc stack separator is a high-speed, stable, sealed, efficient, and automatic slag discharge 3 phase separation equipment. It is widely used for liquid, liquid, solid 3-phase separation or liquid-liquid separation. The 2-phase solid-liquid separation disc separator has only one liquid discharge port and one slag discharge port, while the 3-phase disc separator has two liquid discharge ports and one slag discharge port, which can separate two liquids with different specific gravity at the same time. It can also discharge solid phase materials. Compared with the 3 phase decanter centrifuge, the 3 phase disc separator has larger rotation speed and G force. The 3 phase decanter centrifuge usually has a separation factor of about 3000G, while the 3 phase disc stack separator G force is up to 12000G. Therefore, the 3 phase disc separator can more thoroughly separate liquids with different specific gravity and the liquid phase discharged is more clarified. However, compared to 3 phase decanter centrifuges, 3 phase disc separator is more used to separate materials containing fine particles, with less solids content. So before entering the 3 phase disc separator, the material can separated by the decanter centrifuge for pre-stage separation to reduce the solids content and remove big particles. 2 www.gnseparation.com
Disc Separator Working Principle Working Principle & Features The separated material enters into the heart of the machine, that is, the inside of the bowl. Under the action of strong centrifugal force, the material passes through a set of disc bundle separation intervals. With the neutral holes of the disc as the interface, the liquid with larger specific gravity moves along the disc wall towards the outside the neutral hole, where heavy slag accumulates in the sediment area, and the heavy phase liquid flows upward to the centripetal pump; the lighter liquid with a smaller specific gravity moves along the disc wall into the neutral hole and converges to the lower centrifugal pump. The light and heavy liquid phases are discharged by the lower centrifugal pump and the upper centripetal pump respectively; the heavy slag is regularly discharged; continuous production is implemented. 3 www.gnseparation.com
Technical Parameters 3 Phase Disc Separator Model Type GNSD-40 GNSD-90 GNSD-125 GNSD225 Liquid-Liquid Separation (or Liquid-Liquid-Solid Separation) Bowl Diameter 440mm 580mm 620mm 800mm Slide Piston 380mm 500mm 550mm 700mm Theory Capacity 1-2 m3/h 5-10m3/h 10-15 m3/h 20-25m3/h Max. Speed 7100RPM 6150RPM 6000RPM 4500RPM Max. G Force 12409G 12273G 12488G 9063G Motor Power 11KW 18.5KW 30KW 45KW Feeding Pressure 0-0.1Mpa Starting Time 10-15 minutes Feed Material Solids 3% www.gnseparation.com 4
Bowl System Features The bowl is the heart of the disc separator. The process effect is obtained by the rotating drum with high speed. It is mainly composed of the bowl body, the bowl cover, the locking ring, the disc holder, and a group of discs, etc. Each part on the bowl is the key to the separator. The key parts are machined by CNC machine and followed strict quality control system control. After assembling these parts precisely, the whole dynamic balance test is carried out precisely. The bowl is made of imported high-strength, corrosion-resistant stainless steel material, and integral forged by high-pressure, four non-destructive testing, CNC machining, in order to ensure that the separator operates safely and reliably under long time, high load and high speed. www.gnseparation.com 5
Disc Processing Technic Advanced Technic Ensures Quality The disc is the key part of the separator. The processing quality determines the separation effect of the machine directly. We independently develop the special processing equipment for the disc. All the processes are formed by uniform mold and processed by surface polishing and flatting. The whole process achieves the international advanced level. All the discs are spinning forming at one time, and the surface is precisely smoothed to separate the fluid under the minimum frictional resistance to obtain the best separation effect. www.gnseparation.com 6
Control System Control and Monitor Control and Monitoring The GN disc separator control system can perform real-time separation, start, stop, emergency stop and manual slag control, ammeter, alarm and so on. Each separator is equipped with an independent PLC control and a separate touch screen. The control cabinet has an emergency stop button, and equipment would not start automatically after the recovery of power supply. ·PLC and touch screen are Siemens or well-known international series. ·The control module reserves at least 20% remain, and the digital input and output signals are controlled by DC24V.。 ·Display and control the operating conditions of the separator and associated equipment. ·Setting up the operating parameters of the separator and the operation of the associated equipment ·Display operating parameters of the separator, such as vibration, current, and speed ·Display real-time alarms, help information Alarm function · Vibration alarm of the machine: When it is exceeded the First Grade specified value, it will automatically alarm. If it is exceeded the Second Grade specified value and the delay is not eliminated, it will stop automatically. ·Speed alarm: When the speed of the machine is greater than or less than 5%, it will alarm automatically, and it will stop automatically after a certain time delay. ·Alarm of slag discharging amount less than the specified value. When the machine is in normal operation, it is necessary to discharge the slag on time and need to discharge the pre-set slag discharge amount, otherwise the machine will alarm automatically. The discharging shortfall can be supplemented by manual slagging。 ·Bowl leakage alarm, when the seal ring of the large piston is not completely sealed, the machine will alarm automatically。 7 www.gnseparation.com
Facilities No. 1 Factory: Headquarter Office www.gnseparation.com No. 2 Factory: Centrifuge & Pumps Manufacture
Facilities Pump & Centrifuges Workshop www.gnseparation.com
Facilities Fabrication & Coating Laser Cutting Welding www.gnseparation.com Plasma cutting Powder Coating Ball Blasting and Paint Warehouse & Stock
Facilities GN America Company www.gnseparation.com
Contact GN Branches USA Branch China Headquarters Hebei GN Separation & Conveying Equipment Co., Ltd GN Solids America LLC Email: sales@gnseparation.com Web: www.gnseparation.com Tel: 86-316-5276988 Fax: 86-316-5276990 Add: No. 1 Zhongxun Road, Dachang Chaobai River Industry Zone, Langfang, China Location: 40km to Beijing International Airport Email: USA@gnsolidscontrol.com Web: www.gnsolidsamerica.com Tel: 1-713-8780880 Fax: 1-832-288-5917 Address: 6710 Windfern Road, Houston, TX 77040, USA Russia Branch GN Solids Russia Email: andrey@gnsolidscontrol.co Web: www.gnsolidscontrol.ru Tel: 7 925 304 25 70 Address: г.Москва.Радонежского Сергия ул. 12
2 GN 3 phase disc stack separator is a high-speed, stable, sealed, efficient, and automatic slag discharge 3 phase separation equipment. It is widely used for liquid, liquid, solid 3-phase separation or liquid-liquid separation. The 2-phase solid-liquid separation disc separator has only one liquid discharge port and one slag discharge port .
PHILIPS FW-C577 Philips Consumer Electronics North America P.O.Box 14810 Knoxville, TN 37914-1810 Phone no.: 1-800-531-0039. 3 P3 DISC 5 DISC 5 DISC 1 DISC 1 D 2 DISC 2 DISC 3 DISC D 4 DISC 4 DISC DISC 3 DISC4 DISC DISC DISC 5 DISC DISC 2 DISC 1 CD/C -R CD-R-W W OMPATIBLE TIBLE ST
CAT6 - New! Indigo 6 6.0 F 6.0 F 135 cm Separator 6 CAT5 Indigo 5 6.0 F 5.0 F 132 cm Separator 5 CAT3 Indigo 3 4.1 F 3.4 F 150 cm Separator 3 Indigo Separators Total SEP8 - New! Separator 8 n/a .072" 150 cm CAT8 SEP6 - New! Separator 6 n/a .055" 175 cm CAT6 SEP5 Separator 5 n/a .045" 175 cm CAT5 SEP3 Separator 3 n/a .028" 190 cm CAT3 .
Demos: Descriptions, Process and Teaching Points 31 Disc 1 Pavitar 32 Disc 2 Cheryl 33 Disc 4 Amara 33 Disc 5 Masti 35 Disc 6 Nirala 37 Disc 7 Coral 39 Disc 8 Sam 40 Disc 9 Sahaja 41 Disc 10
Horizontal 3-phase separator 20 Figure 8. Vertical 3-phase separator 21 Figure 9. Vertical Separator with Wire Mesh Mist Extractor 29 Figure 10. Horizontal Three-Phase Separator with Wire Mesh Mist Extractor 31 Figure 11. Drag coefficient for rigid spheres 39 Figure 12. Typical vessel
axis of the separator body; 7. Water defined as the primary phase, and oil as secondary phase with 0.2 volume fraction. Mesh Generation The 2-D two-phase separator model is drawn in this study. The separator with 90" length and 14" high. The schematic diagram of the separator is shown in Figure 1.
Document Title: CryoWorks Phase Separator Product Manual Revision: A Created By Nicholas Theiss Date: 07/08/2021 CryoWorks, Inc. 3309 Grapevine Street Jurupa Valley, CA 91752 www.CryoWorks.net PAGE 1 of 12 CryoWorks Phase Separator Product Manual Model - APPS (Adjustable Pressure Phase Separator) A Initial Release NT 07/08/2021 TMSR
ic-disc audit guide lb&i-04-0212-003 1. introduction 1. purpose 2. format 3. limitation 2. a general overview of the disc 1. introduction to the disc 2. how the disc return is processed and procedures for requisitioning 3. summary of the disc rules. 3. the disc law and major concepts 1. taxation of a disc - irc § 991 1.
pile bending stiffness, the modulus of subgrade reaction (i.e. the py curve) assessed based on the SW model is a function of the pile bending - stiffness. In addition, the ultimate value of soil-pile reaction on the py curve is governed by either the flow around failure of soil or the plastic hinge - formation in the pile. The SW model analysis for a pile group has been modified in this study .
