SAP PART NUMBERING MANUAL - Vishay Intertechnology
SAP PART NUMBERING MANUAL
SAP PART NUMBERING MANUALVISHAY DALE FILM RESISTORS
VISHAY DALE FILM RESISTORSB/HSAP Part NumberBBF20M5LF08BBMW210MLE08SAP DescriptionBBF 20.5M 15% F08BBMW 210M 15% E08 e3NOTE: H SERIES NO LONGER MANUFACTURED, AVAILABLE ONLY IF INVENTORY EXISTSMODEL3 or 4 WHAKWHBFHBFWHBMHBMWHBRHBRWHBVHFQHFTHFWVALUE4 digitsK kilohmsM MegohmsG GigohmsCheck data sheet foravailable valuerangeTOLERANCE1 digitJ 5%K 10%L 15%M 20%PACKAGING3 digitsSTANDARD LEADFREE CODESE08 Foam pack, 5/ea rolled in MicrofoamSTANDARD TIN/LEAD CODESF08 Foam pack, 5/ea rolled in MicrofoamNON-STANDARD TIN/LEAD CODESF03 Foam pack, 10/ea rolled in MicrofoamF06 Foam pack, 1/ea rolled in MicrofoamJ03 Skin pack, 5 to 10 pcs on cardboard (vary with size)M27 Heat Seal pack, components wrapped in pink foam, sealed ina level “C” – water-vapor proof bag in a supplemental container,marking per MIL-STD-129.S51 Custom pack, per TPISPECIALUp to 3 digitsDash #'s1 thru 999 asapplicableBlank Standard
VISHAY DALE FILM RESISTORSC6SAP Part ALUESAP DescriptionC6 :6301 221K 1% CJC6 :6302 12 5% EA e3TOLERANCESPEC1 digit5 digits4 digits1 digit4 digitsC00006 6R ohmsK kilohmM MegohmF 1%G 2%J 5%K 10%See FP/C6 SpecCodesPACKAGING2 digitsSTANDARD LEAD FREE CODESEA Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrimEK Bulk packSTANDARD TIN/LEAD CODESCJ Reel pack, 0.200” pitch, 2-7/8” tape spacing, 2-7/8” tape spacing,with leadtrim (RH3, 1,000pcs/reel)B8 Bulk packNON-STANDARD LEAD FREE CODESEF Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrimNON-STANDARD TIN/LEAD CODESA5 Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrimCH Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrim (RH2,750pcs/reel)CF Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrim (RH1,500pcs/reel)LB Lacer pack (L05)KR (K22) ammo pack availableBF (B14) bulk pack availableF5 (F05) foam pack availableCK (R19), RG (R20), RE (R36), RH (R64), R9 (R68), WG (RE4), WF(RE5), R6 (RE6), R7 (RE7), R8 (RE8), C2, C3, CB, M6, R4 reel packavailableNote: C6 is an FP1 or FP32 with an Epoxy coating rather than the FP products normal Silicone coating.
VISHAY DALE FILM RESISTORSCCFSAP Part P DescriptionCCF-50 15 1% T-1 R36CCF-60 10K 1% T-1 E36 e3CCF-2 221 1% T-1 E36 e3MODELSIZEVALUETOLERANCET.C.3 digitsCCF2 digits506002 24 digitsR ohmsK kilohmsM Megohms1 digitF 1%J 5% (not for60-size)1 digitK 100ppm/ C(T-1)H 50ppm/ C(T-2, 50-sizeonly)Check data sheet foravailable value rangeNote: 1% parts onlyavailable in E96 decadevalues and 5% partsonly available in E24decade valuesPACKAGING3 digitsSTANDARD LEADFREE CODESE36 Reel pack,0.200” pitch, 2-1/16” tapespacing, with lead trimSTANDARD TIN/LEAD CODESR36 Reel pack,0.200” pitch, 2-1/16” tapespacing, with lead trimSPECIALUp to 3 digitsDash #'s 1 thru 999as applicableBlank Standard
VISHAY DALE FILM RESISTORSCMF (Industrial)SAP Part E116CMF60332K00FKEA70SAP DescriptionCMF-50 487K .1% T-9 R36CMF-07 39 5% T-0 EA e3CMF-55-116 49.9 1% T-1 R36CMF-60-70 332K 1% T-1 EA e3MODEL SIZEVALUETOLERANCET.C.3 digits 2 digits6 digits1 digit1 digitCMF50R ohmsA 0. 05%E 25ppm/ C(T-9)B 0.1%55K kilohms60M Megohms C 0.25%H 50ppm/ C(T-2)65D 0.5%Note: E24F 1%70K 100ppm/ Cdecade values(T-1)G 2%07only for20J 5%L 150ppm/ CCMF07 and(T-0)K 10%CMF20S SpecialN 200ppm/ C(T-00)Check dataS SpecialNote: 2% andsheet foravailable5%value rangetolerancesonly forCMF07 andCMF20PACKAGING2 digitsSTANDARD LEAD FREE CODESEA Reel pack (std taping, Full reel quantity)EB Reel pack (std taping except 1,000pcs/reel)EK Bulk packSTANDARD TIN/LEAD CODESRE Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrim (R36)R6 Reel pack (RE6, std taping except 1,000pcs/reel)BF Bulk pack (B14)CP Reel pack, 0.400” pitch, 2-7/8’ tape spacing, with leadtrim (R55, std for -146 & -147)NON-STANDARD TIN/LEAD CODESKA Ammo pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrim (K36)RA Reel pack, 0.200” pitch, 2-7/8” tape spacing, no leadtrim (R05)RB Reel pack, 0.200” pitch, 2-1/16” tape spacing, no leadtrim (R08)RC Reel pack, 0.200” pitch, 2-1/2” tape spacing, no leadtrim (R19)RG Reel pack, 0.200” pitch, 2-1/2” tape spacing, with leadtrim (R20)RH Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrim (R64)WF Reel pack (RE5, std taping except 500pcs/reel)R7 Reel pack (RE7, std taping except 1,500pcs/reel)R8 Reel pack (RE8, std taping except 2,000pcs/reel)KB (K55), KE (K81), KJ (K82) ammo pack availableBL (B24), B1 (B25), B7 (B45), B9 (B70), MD (M22), MH (M74), MP(M75) bulk pack availableLA (L03) lacer pack availableM2 (M02), M3 (M03), M6 (M06), M7 (M07), ML (M10), MA (M11), MN(M14), MB (M15) heat seal pack availableME (M23), MG (M24), CM (R16), R5 (R18), R3 (R33), RF (R48), RK(R50), CE (R62), R9 (R68), RL (R74), RQ (RC9), WG (RE4),CL (RH5), SA (S09), SD (S18), SS (S20), SQ (S21), SE (S22), SY (S24)reel pack available SP (RK1)SM (S50), SL (S51) special pack availableNON-STANDARD LEAD FREE CODESER (EK1), EU (E74) reel pack availableSPECIALUp to 3 digitsDash #'s 1 thru 999 asapplicableBlank StandardGENERAL USAGEDASH NUMBERS11 0.032” leadwire(65-size)39 Fusible (55-size)64 Fusible (60-size)70 Color banded, 5bands (for 1 %)80 Color banded, 4bands (for 2 %)88 HSD (for all sizes)95 0.032” leadwire(60-size)143 Non-magnetic;(for all sizes)146 Flame retardant(65 & 70 sizes)147 Pulsewithstanding (65 & 70sizes)170 HSD and Colorbanded, 5 bands (for 1 %)
VISHAY DALE FILM RESISTORSCMF (Military - RL)SAP Part NumberRL20S301JR36SAP DescriptionCMF-20 300 5% T-00 RL20S301J R36MODELSIZEVALUETOLERANCEPACKAGINGSPECIAL2 digits3 digits3 digits1 digit3 digitsUp to 3 digitsRL07S20S3-digit numeric codewhere the first twodigits are the significantfigures and the last digitis the multiplier. Forvalues below 10 ohms,an “R” is used as adecimal placeholder.G 2%J 5%(NOTE: P/N FORMATPER MIL-PRF-22684)Check data sheet foravailable value rangeSTANDARD TIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrimRE6 Reel pack (std taping except 1,000pcs/reel)B14 Bulk packSTANDARD TIN/LEAD SLDC CODESRSL Reel pack, std taping, SLDCBSL Bulk pack, SLDCNON-STANDARD TIN/LEAD CODESK36 Ammo pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrimR05 Reel pack, 0.200” pitch, 2-7/8” tape spacing, no leadtrimR08 Reel pack, 0.200” pitch, 2-1/16” tape spacing, no leadtrimR19 Reel pack, 0.200” pitch, 2-1/2” tape spacing, no leadtrimR20 Reel pack, 0.200” pitch, 2-1/2” tape spacing, with leadtrimR64 Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrimRE5 Reel pack (std taping except 500pcs/reel)K55, K81, K82 ammo pack availableB24, B25, B45, B70, M22, M74, M75 bulk pack availableL03 lacer pack availableM02, M03, M04, M05, M06, M07, M10, M11, M12, M13, M14, M15heat seal pack availableM23, M24, R16, R18, R33, R48, R50, R55, R62, R68, R74, RC9,RD1, RE4, RE7, RE8, RH5, S09, S18, S20, S21, S22, S24 reel packavailableS50, S51 special pack availableDash #'s 1 thru 999 asapplicableBlank StandardGENERAL USAGEDASH NUMBERS88 Hot Solder Dipped143 Non-magnetic
VISHAY DALE FILM RESISTORSCMF (Military - RN)SAP Part NumberRN55D3013FB14RN65E1002BR36143MODELSIZE2 digitsRN2 digits5055606570T.C.SAP DescriptionCMF-55 301K 1% T-1 RN55D3013F B14CMF-65-143 10K .1% T-9 RN65E1002B R36VALUE1 digit4 digits4-digit numeric codeE 25ppm/ C(T-9)where the first three digitsC 50ppm/ C are the significant figures(T-2)and the last digit is themultiplier. For valuesD 100ppm/ C(T-1)below 100 ohms, an “R”is used as a decimalplaceholder.(NOTE: P/N FORMATPER MIL-R-10509)Check data sheet foravailable value rangeTOLERANCE1 digitB 0.1%C 0.25%D 0.5%F 1%PACKAGING3 digitsSTANDARD TIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tape spacing, withleadtrimRE6 Reel pack (std taping except 1,000pcs/reel)B14 Bulk packSTANDARD TIN/LEAD SLDC CODESRSL Reel pack, std taping, SLDCBSL Bulk pack, SLDCNON-STANDARD TIN/LEAD CODESK36 Ammo pack, 0.200” pitch, 2-1/16” tape spacing, withleadtrimR05 Reel pack, 0.200” pitch, 2-7/8” tape spacing, no leadtrimR08 Reel pack, 0.200” pitch, 2-1/16” tape spacing, noleadtrimR19 Reel pack, 0.200” pitch, 2-1/2” tape spacing, no leadtrimR20 Reel pack, 0.200” pitch, 2-1/2” tape spacing, withleadtrimR64 Reel pack, 0.200” pitch, 2-7/8” tape spacing, withleadtrimRE5 Reel pack (std taping except 500pcs/reel)K55, K81, K82 ammo pack availableB24, B25, B45, B70, M22, M74, M75 bulk pack availableL03 lacer pack availableM02, M03, M04, M05, M06, M07, M10, M11, M12, M13, M14,M15 heat seal pack availableM23, M24, R16, R18, R33, R48, R50, R55, R62, R68, R74,RC9, RD1, RE4, RE7, RE8, RH5, S09, S18, S20, S21, S22,S24 reel pack availableS50, S51 special pack availableSPECIALUp to 3 digitsDash #'s 1 thru 999as applicableBlank StandardGENERAL USAGEDASH NUMBERS88 Hot SolderDipped143 Non-magnetic
VISHAY DALE FILM RESISTORSCPFSAP Part 66SAP DescriptionCPF-1 145 .5% T-2 R36CPF-3 60.4K 1% T-1 E36 e3CPF-2-6 11.5 1% T-1 EE6 e3MODEL3 digitsSIZE1 digitVALUE6 digitsTOLERANCE1 digitT.C.1 digitCPF123R ohmsK kilohmsM MegohmsB 0.1%C 0.25%D 0.5%F 1%G 2%J 5%E 25ppm/ C(T-9)H 50ppm/ C(T-2)K 100ppm/ C(T-1)L 150ppm/ C(T-0)N 200ppm/ C(T-00)Check data sheetfor availablevalue rangePACKAGING3 digitsSTANDARD LEAD FREE CODESE36 Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrimEE6 Reel pack (std taping except 1,000pcs/reel)E14 Bulk packSTANDARD TIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrimRE6 Reel pack (std taping except 1,000pcs/reel)B14 Bulk packNON-STANDARD TIN/LEAD CODESK36 Ammo pack, 0.200” pitch, 2-1/16” tape spacing, withleadtrimR05 Reel pack, 0.200” pitch, 2-7/8” tape spacing, no leadtrimR08 Reel pack, 0.200” pitch, 2-1/16” tape spacing, no leadtrimR19 Reel pack, 0.200” pitch, 2-1/2” tape spacing, no leadtrimR20 Reel pack, 0.200” pitch, 2-1/2” tape spacing, with leadtrimR64 Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrimRE5 Reel pack (std taping except 500pcs/reel)K55, K81, K82 ammo pack availableB24, B25, B45, B70, M22, M74, M75 bulk pack availableL03 lacer pack availableM02, M03, M04, M05, M06, M07, M10, M11, M12, M13, M14,M15 heat seal pack availableM23, M24, R16, R18, R33, R48, R50, R55, R62, R68, R74, RC9,RD1, RE4, RE7, RE8, RH5, S09, S18, S20, S21, S22, S24 reelpack availableS50, S51 special pack availableEKA ( Pb-Free Ammo) full 2500 pcs per boxKE6 (Pb-Bearing Ammo)EK1 (Pb-Free Ammo) 1K pcs per boxNON-STANDARD LEAD-FREE CODESE74 Reel pack availableSPECIALUp to 3 digitsDash #'s 1 thru999 as applicableBlank Standard
VISHAY DALE FILM RESISTORSCRCCSAP Part NumberCRCC1206123F560KTFCRCC1206472J220MEASAP DescriptionCRCC1206123F560K R02CRCC1206472J220M EA e3MODELSIZERESISTANCE VALUE4 digits4 digits3 digitsCRCC12063-digit numeric code (inohms) where the firsttwo digits are thesignificant figures andthe last digit is themultiplier.Check data sheet foravailable value rangeRESISTORTOLERANCE1 digitCAPACITANCE VALUEF 1%G 2%J 5%3-digit numeric code (inpicofarads) where the firsttwo digits are the significantfigures and the last digit isthe multiplier.3 digitsCheck data sheet foravailable value rangeCAPACITORTOLERANCE1 digitK 10%M 20%PACKAGING2 digitSTANDARD LEAD FREE CODESEA Reel pack, embossed carriertape, 7” reelSTANDARD TIN/LEAD CODESTF Reel pack, embossed carriertape, 7” reel (R02)
VISHAY DALE FILM RESISTORSD/GSAP Part NumberDPX40M2JB191GPW250KLE19DVY500MJB19V1SAP DescriptionDPX-1 40.2M 5% B19GPW 250K 15% E19 e3DVY-V1 500M 5% B19NOTE: SP07 will convert Vinyl and Mylar sleeve options as “Specials”. For example: DVYV will show as DVY-V.MODELVALUETOLERANCE3 digitsDJUDPWDPXDVYDZWDZZGJUGPWGPXGVYGZWGZZ4 digitsK kilohmsM MegohmsG Gigohms1 digitJ 5%K 10%L 15%M 20%Check data sheet foravailable value rangePACKAGING3 digitsSTANDARD LEAD FREE CODESE19* Bulk packE03* Skin packSTANDARD TIN/LEAD CODESB19 Bulk packJ03 Skin pack, 5 to 10 pcs on cardboard (varywith size)F06 Foam pack, 1/ea rolled in MicrofoamM27 Heat Seal pack, components wrapped inpink foam, sealed in a level “C” – water-vaporproof bag in a supplemental container, markingper MIL-STD-129.S51 Custom pack, per TPI* Leadfree version not currently releasedOPTIONALCONSTRUCTIONUp to 1 digitV Vinyl sleeveM Mylar sleeveSPECIALUp to 3 digitsDash #'s 1 thru 999 asapplicableBlank Standard
VISHAY DALE FILM RESISTORSDCSAP Part NumberDC1/4436R2DR3618DC1/8500K0FR3610SAP DescriptionDC-1/4-18 436.2 .5% R36DC-1/8-10 500K 1% R36NOTE: DC SERIES NO LONGER MANUFACTURED, AVAILABLE ONLY IF INVENTORY EXISTSMODEL2 digitsDCSIZE3 digits1/41/8VALUE5 digitsR ohmsK kilohmsM MegohmsCheck data sheet foravailable value rangeTOLERANCE1 digitD 0.5%F 1%G 2%J 5%PACKAGING3 digitsTIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tapespacing, with leadtrimRE4 Reel pack (std taping except min of300pcs/reel, multiple of 100pcs)RE5 Reel pack (std taping except 500pcs/reel)RE6 Reel pack (std taping except 1,000pcs/reel)RE7 Reel pack (std taping except 1,500pcs/reel)RE8 Reel pack (std taping except 2,000pcs/reel)K36 Ammo pack, 0.200” pitch, 2-1/16” tapespacing, with leadtrimSPECIALUp to 3 digitsDash #'s 1 thru 999 asapplicableBlank Standard
VISHAY DALE FILM RESISTORSDCSSAP Part NumberDCS1/2135R0FR3615SAP DescriptionDCS-1/2-15 135 1% R36NOTE: DCS SERIES NO LONGER MANUFACTURED, AVAILABLE ONLY IF INVENTORY EXISTSMODEL3 digitsDCSSIZE3 digits1/2VALUE5 digitsR ohmsK kilohmsM Megohms135R0 135 ohmTOLERANCE1 digitD 0.5%F 1%G 2%J 5%PACKAGING3 digitsTIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tapespacing, with leadtrimRE4 Reel pack (std taping except min of300pcs/reel, multiple of 100pcs)RE5 Reel pack (std taping except 500pcs/reel)RE6 Reel pack (std taping except 1,000pcs/reel)RE7 Reel pack (std taping except 1,500pcs/reel)RE8 Reel pack (std taping except 2,000pcs/reel)SPECIALUp to 3 digitsDash #'s 1 thru 999as applicableBlank Standard
VISHAY DALE FILM RESISTORSERC (Military - RNC / RNR)SAP Part NumberRNC55H1002FSR36RNC60J10R0FSRE6201MODEL3 digitsSIZE2 digitsRNCRNR5055606570T.C.1 digitSAP DescriptionERC-55 10K 1% T-2 RNC55H1002FS R36ERC-55-201 10 1% T-9 RNC60J10R0FSR RE6VALUE4 digitsJ 25ppm/ C 4-digit numeric code(T-9)where the first threedigits are theH 50ppm/ C(T-2)significant figuresK 100ppm/ C and the last digit is(T-1)the multiplier. Forvalues below 100ohms, an “R” is usedas a decimalplaceholder.(NOTE: P/NFORMAT PER MILPRF-55182)Check data sheet foravailable value rangeTOLERANCE FAILURE RATE1 digit1 digitB 0.1%D 0.5%F 1%M 1%P 0.1%R 0.01%S 0.001%PACKAGING3 digitsSTANDARD TIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tape spacing,with leadtrim (std for 50, 55 & 60 sizes)R64 Reel pack, 0.200” pitch, 2-7/8” tape spacing,with leadtrim (std for 65 & 70 sizes)RE6 Reel pack (std taping except 1,000pcs/reel)B14 Bulk packSTANDARD TIN/LEAD SLDC CODESRSL Reel pack, std taping, SLDCBSL Bulk pack, SLDCNON-STANDARD TIN/LEAD CODESR05 Reel pack, 0.200” pitch, 2-7/8” tape spacing, noleadtrimR08 Reel pack, 0.200” pitch, 2-1/16” tape spacing,no leadtrimR19 Reel pack, 0.200” pitch, 2-1/2” tape spacing,no leadtrimR20 Reel pack, 0.200” pitch, 2-1/2” tape spacing,with leadtrimRE5 Reel pack (std taping except 500pcs/reel)K36, K55, K81, K82, K83 ammo pack availableB24, B25, B45, B70, M22, M74, M75 bulk packavailableL03 lacer pack availableM02, M03, M04, M05, M06, M07, M10, M11, M12,M13, M14, M15 heat seal pack availableM23, M24, R16, R18, R33, R38, R48, R50, R55, R62,R68, R74, R93, RC9, RD1, RE4, RE7, RE8, RH5,S09, S18, S20, S21, S22, S24 reel pack availableS50, S51 special pack availableSPECIALUp to 3 digitsDash #'s 1 thru 999as applicableBlank StandardGENERAL USAGEDASH NUMBERS4 HSD (70-size)31 HSD (50-size)65 HSD (55 or 65size)201 HSD (60size)
VISHAY DALE FILM RESISTORSERC (Specials)SAP Part NumberERC50536R00FHR697ERC5510K000BER6122SAP DescriptionERC-50-97 536 1% T-2 RE6ERC-55-122 10K .1% T-9 RE6(Typically to Customer Source Control Drawings)MODEL SIZEVALUETOLERANCET.C.3 digits 2 digits6 digits1 digit1 digitERC50R ohmsA 0.05% Z 5ppm/ C (T16)55K kilohmsB 0.1%60M MegohmsY 10ppm/ CC 0.25%(T-13)65D 0.5%Check data sheet70X 15ppm/ CF 1%(T-10)for available valueG 2%rangeE 25ppm/ CJ 5%(T-9)H 50ppm/ C(T-2)K 100ppm/ C(T-1)PACKAGING2 digitsSTANDARD LEAD FREE CODESEA Reel pack, 0.200” pitch, 2-1/16” (for 50, 55 & 60-sizes) or 2-7/8” (for65 & 70-sizes) tape spacing, with leadtrimEB Reel pack (std taping except 1,000pcs/reel)EK Bulk packSTANDARD TIN/LEAD CODESRE Reel pack, 0.200” pitch, 2-1/16” tape spacing, with leadtrim (R36, stdfor 50, 55 & 60-sizes)RH Reel pack, 0.200” pitch, 2-7/8” tape spacing, with leadtrim (R64, stdfor 65 & 70-sizes)R6 Reel pack (RE6, std taping except 1,000pcs/reel)BF Bulk pack (B14)NON-STANDARD TIN/LEAD CODESRA Reel pack, 0.200” pitch, 2-7/8” tape spacing, no leadtrim (R05)RB Reel pack, 0.200” pitch, 2-1/16” tape spacing, no leadtrim (R08)RC Reel pack, 0.200” pitch, 2-1/2” tape spacing, no leadtrim (R19)RG Reel pack, 0.200” pitch, 2-1/2” tape spacing, with leadtrim (R20)WF Reel pack (RE5, std taping except 500pcs/reel)KA (K36), KB (K55), KE (K81), KJ (K82) ammo pack availableBL (B24), B1 (B25), B7 (B45), B9 (B70), BS (BSL), MD (M22), MH (M74),MP (M75) bulk pack availableLA (L03) lacer pack availableM2 (M02), M3 (M03), M6 (M06), M7 (M07), ML (M10), MA (M11), MN(M14), MB (M15) heat seal pack availableME (M23), MG (M24), CM (R16), R5 (R18), R3 (R33), RF (R48), RK (R50),CP (R55), CE (R62), R9 (R68), RL (R74), RQ (RC9), WG (RE4), R7 (RE7),R8 (RE8), CL (RH5), UL (RSL), SA (S09), SD (S18), SS (S20), SQ (S21),SE (S22), SY (S24) reel pack availableSM (S50), SL (S51) special pack availableSPECIALUp to 3 digitsDash #'s 1 thru999 as applicable
VISHAY DALE FILM RESISTORSERL (Military RLR)SAP Part NumberRLR07C1002FSB14RLR20C2152GRR3611MODEL3 digitsRLRSIZESAP DescriptionERL-07 10K 1% T-1 RLR07C1002FS B14ERL-20-11 21.5K 2% T-1 RLR20C2152GR R36LEADVALUETOLERANCEMATERIAL2 digits4 digits1 digit1 digit05C4-digit numeric codeF 1%where the first three07G 2%digits are the significant20figures and the last digit32is the multiplier. Forvalues below 100 ohms,an “R” is used as adecimal placeholder.(NOTE: P/N FORMATPER MIL-PRF-39017)Check data sheet forAvailable value rangeFAILURERATE1 digitM 1%P 0.1%R 0.01%S 0.001%PACKAGINGSPECIAL3 digitsUp to 3 digitsSTANDARD TIN/LEAD CODESR36 Reel pack, 0.200” pitch, 2-1/16” tape spacing, withleadtrim (std for 05, 07 & 20 sizes)R64 Reel pack, 0.200” pitch, 2-7/8” tape spacing, withleadtrim (std for 32 size)RE6 Reel pack (std taping except 1,000pcs/reel)B14 Bulk packSTANDARD TIN/LEAD SLDC CODESRSL Reel pack, std taping, SLDCBSL Bulk pack, SLDCNON-STANDARD TIN/LEAD CODESR05 Reel pack, 0.200” pitch, 2-7/8” tape spacing, noleadtrimR08 Reel pack, 0.200” pitch, 2-1/16” tape spacing, noleadtrimR19 Reel pack, 0.200” pitch, 2-1/2” tape spacing, noleadtrimR20 Reel pack, 0.200” pitch, 2-1/2” tape spacing, withleadtrimRE5 Reel pack (std taping except 500pcs/reel)K36, K55, K81, K82, K83 ammo pack availableB24, B25, B45, B70, M22, M74, M75 bulk pack availableL03 lacer pack availableM02, M03, M04, M05, M06, M07, M10, M11, M12, M13,M14, M15 heat seal pack availableM23, M24, R16, R18, R33, R38, R48, R50, R55, R62,R68, R74, R93, RC9, RD1, RE4, RE7, RE8, RH5, S09,S18, S20, S21, S22, S24 reel pac
Hot Solder Dipped. 143 Non-magnetic. VISHAY DALE FILM RESISTORS. CPF. SAP Part Number SAP Description CPF1145R00DHR36 CPF-1 145 .5% T-2 R36 CPF360K400FKE36 CPF-3 60.4K 1% T-1 E36 e3 CPF211R500FKEE66 CPF-2-6 11.5 1% T-1 EE6 e3. MODEL 3 digits SIZE 1 digit VALUE 6 digits T
SAP PART NUMBERING MANUAL. VISHAY DALE WIREWOUND RESISTORS. VISHAY DALE WIREWOUND RESISTORS. CA. SAP Part Number SAP Description. CA000150R00JR058 CA-1-8 50 5% R05 CA5050R5000KE14 CA-5050 .5 10% E14 e3. MODEL. 2 digits. SIZE. 4 digits: VALUE. 5 digits: TOLERANCE. 1 digit: PACKAGING. 3 digits: SPECIAL. Up to 3 digits: CA. 0001: 0002. 4000 thru 4220.
SAP ERP SAP HANA SAP CRM SAP HANA SAP BW SAP HANA SAP Runs SAP Internal HANA adoption roadmap SAP HANA as side-by-side scenario SAP BW powered by SAP HANA SAP Business Suite powered by SAP HANA Simple Finance 1.0 2011 2013 2014 2015 Simple Finance 2.0 S/4 HANA SAP ERP sFin Add-On 2.0
SAP Certification Material www.SAPmaterials4u.com SAP Certification Material for SAP Aspirants at Low cost Home Home SAP Business Objects SAP BPC CPM SAP BPC 7.0 SAP EWM SAP GTS SAP Public Sector SAP Real Estate SAP FSCM SAP FI/CO SAP AC - FI/CO SAP BI 7.0 SAP CRM 5.0
FPC.,10 CBC CNT-6 PART NUMBERS Numbering 1-50 IK190001 Numbering 51-100 IK190051 Numbering 101-150 IK190101 Numbering 151-200 IK190151 Numbering 201-250 IK190201 . Numbering 801-850 IK190801 Numbering 851-900 IK190851 Numbering 901-950 IK190901 N
available with the best load cells in the world, including Rice Lake, Vishay Celtron, Vishay BLH, HBM, Flintec, Interface, Vishay RTI, Vishay Sensortronics, and Vishay Tedea-Huntleigh. We are ISO 9001 registered, consistently providing the highest quality in the industry. Our quality a
know load cells and are here to guide you to the right one. Only Rice Lake has the world’s largest selection of load cells and mounts, including Rice Lake, Vishay Celtron, Vishay BLH, HBM, Flintec, Interface, Vishay RTI, Vishay Sensortronics and Vishay Tedea-Huntleigh.
SAP Master Data Governance SAP Information Steward SAP HANA smart data integration SAP Data Hub SAP Cloud Platform Big Data Services SAP HANA, platform edition SAP Vora Customer Experience IoT Workforce Engagement SAP Cloud for Customer SAP Commerce SAP Marketing SAP Asset Intelligence Network SAP Predictive Maintenance and Service SAP .
SAP HANA Appliance SAP HANA DB In-Memory A io BI Client non-ABAP (SAP supported DBs) SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Warehouse SAP HANA DB r In-Memory Source Systems SAP LT Replication Ser
