Tub Wall Kits Swanstone Tub Wall Kits B
Bath & UtilityTub Wall KitsSpecialty Wholesalers N61 W23049 Silver Spring Drive Post Office Box 215 Sussex WI 53089 800 242 6627 or 262 246 6555 fax 262 246 4275 www.ldss.comBSwanstone Tub Wall KitsMetropolitan CollectionBring out the real warmth and comfort of any bathroom with the Swanstoneauthentic solid surface shower wall. This product is made of solid, homogeneous material that is mold and mildew resistant. It does not require anyspecial care and is economically priced to fit most construction and remodeling budgets. These easy-to-clean wall systems fit most standard tubenclosures and are simple to install. Swan also offers a variety ofSwanstone wall panel sizes to accommodate virtually any design opportunity. Panels can also be combined to work with your specific installationrequirements. Swanstone tub walls are protected by our limited lifetimewarranty.Three Panel Bathtub Wall Kit SS60-3Designed to fit a standard 30” x 60” bathtub, this kit features a single seamless back panel and two side panels. It is available in 60” height andincludes two corner molding strips. Trim kits are available in matching andother colors. Soap dishes, adhesive and caulk are not included.The SS60-3 kit is a five piece compression molded unit with a smooth surface. SS60-3 kit includes one flat back panel with two flat side panels, twocorner molding strips and complete installation instructions. Available inWhite (01), Tahiti White (11), Bisque (18), Bone (37), Bermuda Sand (40),Almond Galaxy (46), Tahiti Desert (A0), Tahiti Sand (A1) and Tahiti Ivory(A9).Three Panel Bathtub Wall Kit SS72-3Designed to fit a standard 30” x 60” bathtub, this kit features a single seamless back panel and two side panels. It is available in 72” height andincludes two corner molding strips. Trim kits are available in matching andother colors. Soap dishes, adhesive and caulk are not included.The SS72-3 kit is a five piece compression molded unit with a smooth surface. SS72-3 kit includes one flat back panel with two flat side panels, twocorner molding strips and complete installation instructions. Available inWhite (01), Tahiti White (11), Bisque (18), Bone (37), Bermuda Sand (40),Almond Galaxy (46), Tahiti Desert (A0), Tahiti Sand (A1) and Tahiti Ivory(A9).Video “How To Install Swanstone Bathtub Wall Panel Systems andTrim Kits: SS60-3/TK6072”Features the SS60-3 and TK6072, but manyof the techniques used are the same onesused on any Swanstone wall product. Seethe installation instructions for each productfor specific differences. Running time: 16minutes, 40 seconds.Product January 2008SS60-3To /UnitBath Tub Kit, Solid30”x60”each135 lbs.Bath Tub Kit, Tahti30”x60”each135 lbs.Bath Tub Kit, Solid30”x60”each160 lbs.Bath Tub Kit, Tahiti30”x60”each160 lbs.How To Install Swanstone Bathtub Wall Panel SystemsTo OrderFax 262 246 4275 Online www.ldss.comB.19
Bath & UtilityTub Wall KitsSpecialty Wholesalers N61 W23049 Silver Spring Drive Post Office Box 215 Sussex WI 53089 800 242 6627 or 262 246 6555 fax 262 246 4275 www.ldss.comBSwanstone Tub Wall Kit with Integral TrimMetropolitan CollectionThree Panel Bathtub Wall Kit SSIT-60-3The SSIT-60-3 authentic solid surface bathtub kit hasthe trim seamlessly molded into the panels for ease ofinstallation. This innovative design eliminates the needfor a separate trim kit.The SSIT-60-3 kit is a seven piece compression molded unit with a smooth surface. It is designed to fit a 331/2” D x 60” W tub area. SSIT-60-3 kit includes oneback panel with integral trim, two side panels with integral trim, two bathtub apron strips, two corner moldingsand complete installation instructions.Product No.SSIT-60-3-01DescriptionBath Tub Kit, WhiteTo ight/Unit145 lbs.Swanstone Tub Wall KitSwanstone ClassicsFive Panel Bathtub Wall Kit SS60-5Accentuate the look of your next bath project with this Swanstone wallpanel kit. The middle back panel on this authentic solid surface kit featurestwo soap shelves. It is designed to fit a 30” W x 60” D tub area, 60” high.Shown here with the TK6072 Trim Kit.The SS60-5 kit is a seven piece compression molded unit with a smoothsurface. SS60-5 kit includes one back panel with two molded-in soap andshampoo shelves, four flat wall panels, two corner molding strips, pressuresensitive tape applied to all outer edges, three tubes of adhesive, one tubeof color-coordinated caulk and complete installation instructions.Available in White (01), Tahiti White (11), Bisque (18), Arctic Granite (35),Bone (37), Bermuda Sand (40), Almond Galaxy (46), Cornflower (63), TahitiDesert (A0), Tahiti Sand (A1) and Tahiti Ivory (A9).Product No.SS60-5-##SS60-5-##SS60-5-##B.20DescriptionTub Kit, SolidTub Kit, TahitiTub Kit, GraniteTo heacheachTo OrderApproximateShippingWeight/Unit121 lbs.121 lbs.121 lbs.Fax 262 246 4275 Online www.ldss.comJanuary 2008
Bath & UtilityTub Wall KitsSpecialty Wholesalers N61 W23049 Silver Spring Drive Post Office Box 215 Sussex WI 53089 800 242 6627 or 262 246 6555 fax 262 246 4275 www.ldss.comBSwanTile Tub Wall KitsSwanstone Classics SwanTile TI-3/TI-33 (right) TI-5/TI-55 (lower right)This product looks and feels like ceramic, but is easier to install and maintain.Designed to be applied over any solid surface, this tubwal never develops thetypical cracks or moldy grout lines of ceramic tile, never needs grouting anddoes not chip or scratch. The TI-33 and TI-55 extension kits extend the TI-3and TI-5 tubwals an additional two feet.For tub area 53” to 60” wide, 29” to 32” deep and 59-5/8” high. 3- and 5piece compression molded fiberglass units with molded-in color. All kitsinclude one back panel with molded-in soap dish, two end/corner panels,pressure-sensitive tape applied to all outer edges, three tubes of adhesive,one tube of color coordinated caulk and complete installation instructions. TheTI-5 kit also includes two side panels with molded-in convenience shelves, twoapron strips and an additional tube of adhesive. Available in White and Bone.TI-3/TI-33TI-5/TI-55Product EO-TILEJanuary 2008DescriptionSwanTile Tub Wall, WhiteSwanTile Tub Wall, BoneSwanTile Extension, WhiteSwanTile Tub Wall, WhiteSwanTile Tub Wall, BoneSwanTile Extension, WhiteHow To Install SwanTileUniteacheacheacheacheacheacheachTo OrderApproximateShippingWeight/Unit67 lbs.67 lbs.26 lbs.76 lbs.76 lbs.30 lbs.-Video “How To Install SwanTileShowerwals”Features the TI7260, but may be used forall of the SwanTile Showerwal kits: TI7236,TI7248 and TINEODTF. Running time: 12minutes.Fax 262 246 4275 Online www.ldss.comB.21
Bath & UtilityTub Wall KitsSpecialty Wholesalers N61 W23049 Silver Spring Drive Post Office Box 215 Sussex WI 53089 800 242 6627 or 262 246 6555 fax 262 246 4275 www.ldss.comBSwan High-Gloss Tub Wall KitEveryday Essentials Tub Wall Kit RM58This three panel tub wall system is adjustable to fit most standard tub areasand can even be installed over old ceramic tile. Made of durable fiberglassresins with a lustrous polyurethane coating, the RM58 comes complete withseamless corners for cleaning ease and a molded-in soap dish.For tub areas 29” to 30” deep and up to 60” wide or smaller. Three piececompression molded fiberglass unit with high gloss smooth surface. The kitincludes one back panel with molded-in soap dish, two end panels, factoryinstalled pressure-sensitive tape, three tubes of adhesive, one tube of colorcoordinated caulk and complete installation instructions. Available in White,Bisque and Bone. Beige, Pink, Blue and Gray are available by special order.Video “How To Install Swan FiberglassTubwals: The RM58”Features the installation of the RM58, butmany of the techniques used can be appliedto any of Swan’s fiberglass wall products.Running time: 9 minutes.Product No.RM58-01RM58-18RM58-37VIDEO-FIBERDescriptionSwan HG Tub Wall Kit, WhiteSwan HG Tub Wall Kit, BisqueSwan HG Tub Wall Kit, BoneHow To Install Swan Unit45 lbs.45 lbs.45 lbs.-Veritek Tub Wall KitEveryday Essentials Veritek Tub Wall Kit GN58This three panel tub wall system is made of Veritek with no surface coatingto chip or crack. An affordable wall system in ten solid and granite colors(some are special order). ADA compliant for grab bar installation. The kitcomes with all needed installation materials.For tub areas 30” deep x 60” wide or smaller, 58” high. Three piece compression molded composite unit with molded-in color and a natural glosssurface. The kit includes one back panel with molded-in soap dish, two endpanels, factory installed pressure-sensitive tape, three tubes of adhesive,one tube of color coordinated caulk and complete installation instructions.Available in White (01), Bisque (18), Bone (37), Bermuda Sand (40), GrayGranite (42), Rose Granite (43), Country Blue Granite (44), Mocha Galaxy(45), Tahiti Desert (A0) and Tahiti Evergreen (A7).Product No.GN58-##GN58-##GN58-##B.22DescriptionVeritek Tub Wall Kit, SolidVeritek Tub Wall Kit, TahitiVeritek Tub Wall Kit, AggregateUniteacheacheachTo OrderApproximateShippingWeight/Unit57 lbs.57 lbs.57 lbs.Fax 262 246 4275 Online www.ldss.comJanuary 2008
Bath & UtilityTub Wall KitsSpecialty Wholesalers N61 W23049 Silver Spring Drive Post Office Box 215 Sussex WI 53089 800 242 6627 or 262 246 6555 fax 262 246 4275 www.ldss.comBSwan High-Gloss Tub Wall KitEveryday Essentials Tub Wall Kit WW6000A water and mold resistant five-piece tub wall kit made of heavy gaugefiberglass with high gloss polyurethane finish. With this unit, there is nevera need to worry about water penetration or mold. This tub wall unit isdesigned especially for use with whirlpool tubs. Comes with a 20 year limited warranty.For tub areas 30” to 48” deep, 60” to 72” wide and 58” high. Five piececompression molded fiberglass unit with high gloss smooth surface. The kitincludes one center panel with molded-in soap dish, two right angle cornerpanels, two side panels, pressure-sensitive tape applied to all outer edges,three tubes of adhesive, one tube of color coordinated caulk and completeinstallation instructions.Available in White, Bisque and Bone. Beige, Pink, Blue and Gray are available by special order.Product No.WW6000-01WW6000-18WW6000-37DescriptionSwan HG Tub Wall Kit, WhiteSwan HG Tub Wall Kit, BisqueSwan HG Tub Wall Kit, 50 lbs.50 lbs.50 lbs.Swan High-Gloss Tub Wall KitEveryday Essentials Tub Wall Kit TW32This five panel tub wall system has an overlap system that makes itadjustable to fit most standard tub sizes. It features three molded-in soapand bottle shelves and two front apron strips. Caulk and adhesive areincluded in the kit.For tub areas 29” to 32” deep, 57” to 62” wide and 58” high. Five piececompression molded fiberglass unit with high gloss smooth surface. The kitincludes one back panel with molded-in soap dish, two right angle cornerpanels with molded-in shampoo shelves, two flat side panels, two apronstrips, pressure-sensitive tape applied to all outer edges, three tubes ofadhesive, one tube of color coordinated caulk and complete installationinstructions.Available in White, Bisque and Bone. Beige, Pink, Blue and Gray are available by special order.Product No.TW32-01TW32-18TW32-37January 2008DescriptionSwan HG Tub Wall Kit, WhiteSwan HG Tub Wall Kit, BisqueSwan HG Tub Wall Kit, BoneUniteacheacheachTo OrderApproximateShippingWeight/Unit50 lbs.50 lbs.50 lbs.Fax 262 246 4275 Online www.ldss.comB.23
Bath & UtilityTub Wall Kits / Shower & Tub AccessoriesSpecialty Wholesalers N61 W23049 Silver Spring Drive Post Office Box 215 Sussex WI 53089 800 242 6627 or 262 246 6555 fax 262 246 4275 www.ldss.comBVeritek Tub Wall KitEveryday Essentials Veritek Tub Wall Kit TF57This five panel tub wall system has a softly textured surface that’s bothdurable and easy to clean. It can be installed over existing ceramic tile orany solid surface. This affordable wall kit has many upgrade features at avalue price. The kit comes with all needed installation materials.For tub areas 28” to 30” deep, 58” to 60” wide and 57” high. Five piececompression molded fiberglass unit with softly textured surface. The kitincludes one back panel, two side panels, pressure-sensitive tape appliedto all outer edges, three tubes of adhesive, one tube of color coordinatedcaulk and complete installation instructions.Available in White. Bisque and Bone are available by special order.Product No.TF57-01TF57-18TF57-37DescriptionVeritek Tub Wall Kit, WhiteVeritek Tub Wall Kit, BisqueVeritek Tub Wall Kit, 58 lbs.58 lbs.58 lbs.Window Trim KitsSwanstone Window Trim Kit SSWTKConstructed of Swanstone solid surface material, with the same high qualityas the Swan High Gloss Window Trim Kit. Additional sills are available.For window sill applications up to 36” wide, 10” deep. The kit includes onehorizontal Swanstone sill panel, two vertical Swanstone jamb panels, factory applied pressure-sensitive tape, one tube of adhesive, one tube of caulkand complete installation instructions. Available in White. Individual piecescan be ordered with product number TK03610TP-##.Swan High Gloss Window Trim Kit WTK1Constructed of fiberglass, the Swan Window Trim Kit uses moisture proof,sealed seams that work with almost any window. The smooth surfaceresists abrasions and comes in a high-gloss finish. Optional WK1009extension divider kit (special order) and additional sills are available.SSWTKFor window sill applications up to 36” wide, 8” deep. The kit includes onehorizontal fiberglass sill panel, two vertical fiberglass jamb panels, factoryapplied pressure-sensitive tape, one tube of adhesive, one tube of caulkand complete installation instructions. Available in White, Bisque and Bone.Product dow Trim Kit SS, WhiteWindow Trim Kit HG, WhiteWindow Trim Kit HG, BisqueWindow Trim Kit HG, BoneUniteacheacheacheachTo OrderApproximateShippingWeight/Unit30 lbs.9 lbs.9 lbs.9 lbs.Fax 262 246 4275 Online www.ldss.comWTK1January 2008
1/2” D x 60” W tub area. SSIT-60-3 kit includes one back panel with integral trim, two side panels with inte-gral trim, two bathtub apron strips, two corner moldings and complete installation instructions. Swanstone Tub Wall Kit with Integral Trim To Fit Approximate Tub Shipping Produ
2 #096-1216 swan st. louis, mo (800) 325-7008 swanstone.com made in usa l i m i t e d 1 0 y e a r swanstone integral backsplash countertop w a r r a n t y 10 manufactured from swanstone solid surface recommended for ig-use traffic a
Form # 195-05-16 TW-32 Bathtub Wall Kit WW-6000 Bathtub Wall Kit RM-58 Bathtub Wall Kit HA-58 Bathtub Wall Kit SW-NEO-DTF Corner Shower Wall Kit . Wall Kit www.swanstone.com. IMPORTANT NOTICE IMPORTANT NOTICE: Indicates that equipment or property damage can result if instructions are not followed. Read and Understand the Manual It is the .
Swanstone Wall Kits MSMK723262.010 MSMK72-3262 32x62x72 Modern Subway Tile Wall Kit White 2010.00 . SI00603.221 SSIT-60-3 33.5" x 60" Tub Wall Kit Carrara 1936.00 SK363672.010 SK-363672 Shower Wall Kit - White 165
Swanstone has the widest range of panel sizes to fit standard tub and shower floors. They can be applied over any existing surface and feature huge single, seamless back panels. Swanstone eliminates water, mold, mildew and grout problems. Residential Use Only Model SSIT-60-
DB Dream Beams ( Ford I-Beams) DJM Complete DJM lowering Kits DS Drop Spindles EH Leaf Spring Eye Hangers EL End Links (for anti sway-bars) FK Complete Flip Kits HS Hanger / Shackle Kits (leaf spring rear ends) K One box complete kits LB Aluminum Lowering Block Kits RK Complete Rear Kits SB Steel Lowering Block Kits SE Shock Extenders SH Leaf .
the Ingathering kits for November 5th. We are sending 48 kits this year: 12 Health Kits, 24 School Kits, 12 Sewing Kits and 12 Layettes. If you would like to help with expenses, I will show you what we have spent and what we still need. (All costs are rounded off) Health Kits – Goal 12 complete kits Item/# Needed Est. Cost Total Cost Status
The tub/shower wall surround shall extend from the bathtub rail to bathroom ceiling (approximate height, 82"), with front edge and ceiling trim. The completed system shall cover all existing tile in tub/shower area. (if applicable) 2.2.4 Type: [Model # LB-110-STD] The tub/shower wall surround shall extend from the bathtub rail to a height of 61".
Studies have shown veterinary surgeons do not feel they receive adequate training in small animal nutrition during veterinary school. In a 1996 survey among veterinarians in the United States, 70% said their nutrition education was inadequate. 3. In a 2013 survey in the UK, 50% of 134 veterinarians felt their nutrition education in veterinary school was insufficient and a further 34% said it .
