Parts Manual - Hirepool
C12X/C16X/C24X/C30X Parts Manual Issue 09 053-2871
1 C12X/C16X C24X/C30X ISSUE NO. 09PL-07/18 For Replacement Copy Order P/N 053-2871 This product and its use may be covered by one or more patents at http://patents.charlesmachine.works. This manual contains information concerning the following models: C12X/C16X/C24X/C30X Copyright 2016, 2017, 2018 by The Charles Machine Works, Inc. , Ditch Witch, AutoCrowd, Roto Witch, and CMW are registered trademarks of The Charles Machine Works, Inc.
2
3 FOREWORD This manual contains illustrated parts lists to help you select quality Ditch Witch replacement parts for your Ditch Witch equipment. Using other replacement parts will lessen the productivity of your equipment. Descriptions and specifications in this book were current at publication. However, the Charles Machine Works, Inc. reserves the right to improve equipment, so this manual might not reflect the most current improvements. Part numbers enclosed in a box or marked as “obsolete” in the remarks column are no longer available from The Charles Machine Works, Inc. Your local Ditch Witch dealer may be able to locate the part for you. Footnotes provide more information to help you identify parts shown in the manual. Assembly instructions referenced in footnotes are available through your local Ditch Witch dealer. Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment. Keep the following in mind when ordering Ditch Witch replacement parts: Specify parts you need by part number and description, not by illustration reference numbers. Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new. Thank you for buying and using Ditch Witch equipment and replacement parts. Ver. 04 ID0128552
4 WARRANTY DW WARRANTY Policy August, 2016 POLICY 1: DITCH WITCH EQUIPMENT AND REPLACEMENT PARTS LIMITED WARRANTY POLICY Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for installation of parts under this warranty during the first year following “initial commercial” use of the serial numbered Ditch Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch Witch dealership for all warranty work. EXCLUSIONS FROM PRODUCT WARRANTY All incidental or consequential damages. All defects, damages, or injuries caused by misuse, abuse, improper installation, alteration, neglect, or uses other than those for which products were intended. All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent with manufacturer’s recommendations. All engines and engine accessories (these are covered by original manufacturer’s warranty). Tires, belts, and other parts which are subject to another manufacturer’s warranty. (Such warranty will be available to purchaser.) ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE DUTIES IMPOSED. Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated working conditions prior to purchase. Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or it’s nearest authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacement parts under this warranty as it deems appropriate. Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights which vary from state to state. For information regarding this limited warranty, contact the DWPS, P.O. Box 66, Perry, OK 73077-0066, or contact your local dealer. Ver. 05 ID0134872
5 CONTENTS Decals Electrical C12X. 8 C16X. 10 C24X. 12 C30X. 14 Cables – Battery Cable Black . 102 Cables – Battery Cable Red . 100 Diagram – C16X . 90 Diagram – C24X . 94 Diagram – C30X . 98 Diagram – Fan Harness C16X . 92 Schematic – C16X . 82 Schematic – C24X . 84 Schematic – C30X . 88 Engine Components C12X. 18 C16X. 20, 22 C24X. 24, 26 C30X. 28, 30 Fuel Tank – C24X/C30X. 32, 34 Power Train Track Assembly, Left. 38 Track Assembly, Right . 40 Frame Components Cooler Tower . 48 Frame . 44, 46 Pivot Assembly . 50 Sprocket Option . 52 Control Components Control Tower . 56, 58 Hydraulics Attachment Drive . 72 Attachment Lift . 74 Ground Drive – C12X . 62 Ground Drive – C16X . 64, 66 Ground Drive – C24X/C30X . 70 Ground Drive – C30X . 68 Schematics . 78 Variable Speed Drive Option . 76 Accessories Backfill Blade. 106 Boom Assemblies – 19K Non-Lube . 128 Boom Assemblies – 35K Non-Lube . 130 Chains, Alligator/Duratooth 35K– 2P . 118 Chains, Duratooth 35K – 4P. 114 Chains, Duratooth 35K– 2P. 116 Chains, Shark/Alligator 35K – 2P . 122 Chains, Shark/Duratooth 35K – 2P . 120 EC Kit – C12X. 134 EC Kit – C16X, C24X, C30X . 132 Rotowitch . 124 Trench Cleaner . 126 Weight Kit, 35K – 48” Cup and Combo . 110 Weight Kit, 35K – 48” Shark II. 112 Weights, 35K – 36” Shark II . 108 Miscellaneous Bolt/Nut Torque Chart . 138 Filters . 144 Optional Kits . 144 Related Publications. 144 Replacement O-Ring Chart . 143 Warranty Registration. 146 ID0402535
6
7 DECALS
8 DECAL LOCATION 20 C12X 19 7 8 21 14 12 9 6 13 4 10 17 1 3 18 15 3 11 16 9 3 6 4 5 19 4 2 03 3 ID0456477
9 DECAL LOCATION C12X REF PART NO. NUMBER QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 270-6899 700-063 274-442 274-318 270-1023 270-7678 270-6828 270-6829 270-6827 700-133 270-6893 270-6773 700-009 270-7596 275-419 270-6406 273-475 270-6705 270-6900 275-173 270-7712 DESCRIPTION REMARKS C12X SERVICE DECAL KIT 270-7688 1 1 4 3 1 2 1 1 2 1 1 1 1 1 1 1 1 1 4 1 1 PARKING BRAKE HYDRAULIC OIL CAP LIFT LOCATION TIE DOWN LOCATION NOTICE HYDRAULIC OIL LEVEL C12X MODEL ID CONTROL PANEL DIGGING CHAIN FORWARD/REVERSE STACKED GRAY LOGOTYPE WARNING ONE CALL DIGGING BOOM RAISE AND LOWER PATENT DECAL CAUTION WEAR HEARING PROTECTION CAUTION TIP OVER WARNING NO FLAME OPERATOR MANUAL REPLACEMENT WARNING READ OPERATOR MANUAL OPERATOR INSTRUCTIONS (ROPE START) DANGER CHAIN AND AUGER UNLEADED GASOLINE ONLY C12X LUBE CHART FOOTNOTES 1 . NOT PART OF KIT 03 ID0456477
10 DECAL LOCATION C16X PEDESTRIAN UNIT 8 22 8 20 15 8 10 1 7 3 13 21 18 27 16 14 24 9 17 12 5 23 11 6 3 8 12 9 25 26 19 4 19 07 2 ID0390339
11 DECAL LOCATION C16X PEDESTRIAN UNIT REF PART NO. NUMBER QTY 270-6932 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 270-6406 270-6899 270-6827 270-5127 270-6704 273-475 270-6738 274-442 270-6900 270-6894 270-7807 270-6844 270-6828 270-1023 275-173 700-063 700-133 270-6829 274-318 270-6893 270-4549 275-419 270-6773 700-009 270-7088 274-208 270-7596 DESCRIPTION REMARKS C16X SERVICE DECAL KIT 1 1 2 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 OPERATOR MANUAL REPLACEMENT PARKING BRAKE STACKED LOGOTYPE BATTERY OPERATOR INSTRUCTIONS WARNING READ MANUAL LOGO LIFT LOCATION DANGER CHAIN AND AUGER LOGOTYPE TRENCHER FLOW CONTROL VALVE C16X MODEL ID CONTROL PANEL NOTICE HYDRAULIC OIL LEVEL FUEL TANK GASOLINE HYDRAULIC OIL CAP WARNING ONE CALL DIGGING CHAIN FORWARD/REVERSE TIE DOWN TRENCHER RAISE/LOWER ROTOWITCH WARNING NO FLAME PATENT DECAL CAUTION WEAR HEARING PROTECTION C16X SERVICE / LUBE CHART NOTICE FUEL SHUTOFF CAUTION TIP OVER SEE FOOTNOTE 2. SEE FOOTNOTE 1. FOOTNOTES 1. NOT PART OF KIT. USE ONLY WITH ROTO WITCH OPTION. 2. NOT PART OF KIT. USE ONLY WITH VARIABLE FLOW OPTION. 07 ID0390339
12 DECAL LOCATION C24X PEDESTRIAN UNIT 8 1 8 10 7 2 3 4 13 21 18 11 5 9 24 12 17 23 3 8 14 6 12 9 25 19 16 22 15 19 06 20 ID0389303
13 DECAL LOCATION C24X PEDESTRIAN UNIT REF PART NO. NUMBER QTY 270-6937 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 270-6406 270-6893 270-6827 700-063 270-1023 273-475 270-6738 274-442 270-6900 270-6894 270-7596 270-6845 270-6828 270-6704 275-173 270-5127 700-133 270-6829 274-318 270-6899 270-4549 275-419 270-6773 700-009 270-7096 DESCRIPTION REMARKS C24X SERVICE DECAL KIT 1 1 2 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 OPERATOR MANUAL REPLACEMENT TRENCHER RAISE/LOWER STACKED LOGOTYPE HYDRAULIC OIL CAP NOTICE HYDRAULIC OIL LEVEL WARNING READ MANUAL LOGO LIFT LOCATION DANGER CHAIN AND AUGER LOGOTYPE CAUTION TIP OVER C24X MODEL ID CONTROL PANEL OPERATOR INSTRUCTIONS FUEL TANK GASOLINE BATTERY WARNING ONE CALL DIGGING CHAIN FORWARD/REVERSE TIE DOWN PARKING BRAKE ROTO WITCH WARNING NO FLAME PATENT DECAL CAUTION WEAR HEARING PROTECTION C24X SERVICE/LUBE CHART SEE FOOTNOTE 1 FOOTNOTES 1. NOT PART OF KIT. USE ONLY WITH ROTO WITCH OPTION. 06 ID0389303
14 DECAL LOCATION C30X PEDESTRIAN UNIT 8 1 20 8 10 7 3 16 14 21 13 18 11 9 12 24 17 6 23 3 5 8 12 9 25 19 21 22 15 06 19 2 ID0389636
15 DECAL LOCATION C30X PEDESTRIAN UNIT REF PART NO. NUMBER QTY 270-6942 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 270-6406 270-6899 270-6827 270-5127 270-6704 273-475 270-6738 274-442 270-6900 270-6894 270-7596 270-6768 270-6828 270-1023 275-173 700-063 700-133 270-6829 274-318 270-6893 270-4549 275-419 270-6773 700-009 270-7136 DESCRIPTION REMARKS C30X SERVICE DECAL KIT 1 1 2 1 1 1 1 4 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 1 1 OPERATOR MANUAL REPLACEMENT PARKING BRAKE STACKED LOGOTYPE BATTERY OPERATOR INSTRUCTIONS WARNING READ MANUAL LOGO LIFT LOCATION DANGER CHAIN AND AUGER LOGOTYPE CAUTION TIP OVER C30X MODEL ID CONTROL PANEL NOTICE HYDRAULIC OIL LEVEL FUEL TANK GASOLINE HYDRAULIC OIL CAP WARNING ONE CALL DIGGING CHAIN FORWARD/REVERSE TIE DOWN TRENCHER RAISE/LOWER ROTO WITCH WARNING NO FLAME PATENT DECAL CAUTION WEAR HEARING PROTECTION C30X SERVICE / LUBE CHART SEE FOOTNOTE 1 FOOTNOTES 1. NOT PART OF KIT. USE ONLY WITH ROTO WITCH OPTION 06 ID0389636
16 NOTES: ID0134963
17 ENGINE COMPONENTS
18 ENGINE C12X 1 12 11 10 3 6 4 2 7 9 5 8 02 ID0459246
19 ENGINE C12X REF PART NO. NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 195-1608 105-1980 107-661 150-4152 105-677 165-985 105-052 105-072 160-1297 514-442 150-4591 115-241 QTY 1 4 4 1 3 1 2 2 1 1 1 1 DESCRIPTION ENGINE (HONDA GX390 11.7 HP, RP) FLG SCREW (M10-1.50 X 50MM) 10.9 ZP FLG LKNUT (M10-1.50, PRV TRQ) DOUBLE GEAR PUMP (6.6 CC/1.6 CC) FLG BOLT (3/8-NC X 1-1/4") KEY (1/4" X 2-1/4") BOLT (3/8-NC X 1-1/4") LOCK WASHER (3/8") PUMP MOUNT KIT - 1.00 CONNECTOR (M12-1.50-04NF) NIPPLE (04N-3" 304SS) CAP (04NF) REMARKS 5W30 1.2qt SEE FOOTNOTE 1 USE LOCTITE PIPE SEALANT NOT SHOWN: FOOTNOTES: 1. 160-1297 PUMP MOUNT KIT - 1.00 COMPONENTS. 160-1193 FLANGED COUPLER (1.000", 160-1194 FLANGED COUPLER (9T .625) AND 160-1195 SPIDER INSERT. TORQUE COUPLING TO 19 FT-LB. USE LOCTITE 242. NOTE: 02 ID0459246
20 ENGINE/ ELECTRICAL C16X BEGINS WITH S/N: DWPC16XATH0000978 2 3 34 1 5 30 6 4 29 36 37 28 20 38 27 22 7 25 32 31 26 35 41 8 21 13 19 24 10 14 12 40 39 17 9 15 16 11 18 33 23 04 ID0454059
21 ENGINE/ ELECTRICAL C16X BEGINS WITH S/N: DWPC16XATH0000978 REF PART NO. NUMBER QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1 1 1 1 1 4 1 1 1 1 1 1 4 4 1 2 2 4 1 1 2 3 4 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 3 195-2403 195-1794 500-2807 195-1481 160-1297 105-677 165-985 195-1480 500-2809 500-2808 215-0060 215-0042 106-561 105-226 215-256 106-712 106-385 106-848 500-2093 195-1482 105-1876 105-797 106-538 302-2531 107-859 215-1863 115-106 150-4591 115-241 500-2812 215-0071 106-394 302-3982 195-1479 195-2478 195-2477 195-2476 195-2475 302-3983 105-665 106-237 NOT SHOWN: 195-2631 195-2645 500-3267 DESCRIPTION ENGINE - 16 HP B & S VANGUARD W/TANK FILTER ELEMENT FUEL CAP - 16 VANGUARD FUEL PUMP PUMP MOUNT KIT - 1.00 FLG BOLT (3/8-NC X 1-1/4") KEY (1/4" X 2-1/4") FUEL FILTER STARTER SOLENOID - STARTER BATTERY CABLE (6GA x 36", RED) BATTERY CABLE (6GA X 33", BLK) LOCKNUT (M8-1.25,PRV TRQ,10.9) WASHER (5/16") BATTERY (12V, 200 AMP) FLG SCREW (M6-1.00 X 16MM) FLG LOCKNUT (M6-1.00) FLG SCREW (M6-1.00 X 25MM) OIL FILTER KEY SWITCH SCREW (#6-32 X 5/8", SOC ZP) SCREW (M6-1.00 X 20MM, BX) LOCKNUT (M6-1.00,PRV TRQ,10.9) MANUAL COMPARTMENT - VENTED NUT, LOCK, #6-32, NYLON INSERT TACHOMETER/HOURMETER REDUCER (06N-04NF) NIPPLE (04N-3" 304SS) CAP (04NF) THROTTLE CABLE FAN HARNESS WASHER (M6, HARDENED) BATTERY TRAY PRE-CLEANER KEY LOCK WASHER NUT - SWITCH COVER - SWITCH BATTERY HOLD DOWN FLG SCREW (M8-1.25 X 55MM) LOCKNUT (M6-1.00,PRV TRQ,NLK) REMARKS USE 5W30 1.4QT (47OZ) SEE FOOTNOTE 1 USE LOCTITE PIPE SEALANT USE LOCTITE PIPE SEALANT STATOR REGULATOR OIL DIPSTICK FOOTNOTES: 1. 160-1297 PUMP MOUNT KIT - 1.00 COMPONENTS: 160-1193 FLANGED COUPLER (1.000"), 160-1194 FLANGED COUPLER (9T .625), AND 160-1195 SPIDER INSERT. TORQUE COUPLING BOLT 19 FT-LB. USE LOCTITE 242. NOTE: THIS PARTS PAGE SUPERSEDES OLD #ID0425438 04 ID0454059
22 ENGINE/ ELECTRICAL C16X ENDS WITH S/N: DWPC16XACH0000977 2 39 3 1 33 41 42 5 4 32 23 6 7 43 31 25 30 40 28 35 34 29 24 26 8 12 27 10 14 22 18 17 14 36 20 13 9 11 37 19 16 15 21 38 26 08 ID0425438
23 ENGINE/ ELECTRICAL C16X ENDS WITH S/N: DWPC16XACH0000977 REF PART NO. NUMBER QTY 1 2 3 4* 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 1 1 1 1 1 4 1 1 1 1 1 1 4 6 1 2 2 4 1 2 2 1 1 2 3 7 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 195-2403 195-1794 500-2807 195-1481 160-1297 105-677 165-985 195-1480 500-2809 500-2808 215-0060 215-0042 105-089 105-226 215-256 106-712 106-385 105-130 362-1869 107-025 106-161 500-2093 195-1482 105-1876 105-797 106-237 302-2531 107-859 215-1863 115-106 150-4591 115-241 500-2812 215-0071 106-394 117-1066 107-801 302-2875 195-1479 195-2478 195-2477 195-2476 195-2475 NOT SHOWN: 195-2631 195-2645 500-3267 DESCRIPTION ENGINE - 16 HP B & S VANGUARD W/TANK FILTER ELEMENT FUEL CAP - 16 VANGUARD FUEL PUMP PUMP MOUNT KIT - 1.00 FLG BOLT (3/8-NC X 1-1/4") KEY (1/4" X 2-1/4") FUEL FILTER STARTER SOLENOID - STARTER BATTERY CABLE (6GA x 36", RED) BATTERY CABLE (6GA X 33", BLK) LOCKNUT (5/16-NC) WASHER (5/16") BATTERY (12V, 200 AMP) FLG SCREW (M6-1.00 X 16MM) FLG LOCKNUT (M6-1.00) BOLT (5/16-NC X 2-1/4") PLASTIC BATTERY BOX SCREW (M6-1.00 X 50MM) FLG SCREW (M6-1.00 X 20MM) OIL FILTER KEY SWITCH SCREW (#6-32 X 5/8", SOC ZP) SCREW (M6-1.00 X 20MM, BX) LOCKNUT (M6-1.00,PRV TRQ,NLK) MANUAL COMPARTMENT - VENTED NUT, LOCK, #6-32, NYLON INSERT TACHOMETER/HOURMETER REDUCER (06N-04NF) NIPPLE (04N-3" 304SS) CAP (04NF) THROTTLE CABLE FAN HARNESS WASHER (M6, HARDENED) ABRASION SLEEVE (1.75" DIA.X 4.0") WASHER (M6) BRACKET - BATTERY SUPPORT PRE-CLEANER KEY LOCK WASHER NUT - SWITCH COVER - SWITCH REMARKS USE 5W30 1.4QT (47OZ) SEE FOOTNOTE 1 USE LOCTITE PIPE SEALANT USE LOCTITE PIPE SEALANT STATOR REGULATOR OIL DIPSTICK FOOTNOTES: 1. 160-1297 PUMP MOUNT KIT - 1.00 COMPONENTS: 160-1193 FLANGED COUPLER (1.000"), 160-1194 FLANGED COUPLER (9T .625), AND 160-1195 SPIDER INSERT. TORQUE COUPLING BOLT 19 FT-LB. USE LOCTITE 242. NOTE: THIS PARTS PAGE SUPERSEDES OLD #ID0397678 08 ID0425438
24 ENGINE ELECTRICAL C24X BEGINS WITH S/N: DWPC24XAAH0000750 29 28 26 31 32 30 21 40 33 25 45 14 TO FUEL TANK PICK-UP 43 3 19 18 2 44 37 22 23 30 24 38 39 4 20 5 8 6 5 9 1 41 27 17 16 7 9 49 9 6 10 6 11 12 47 13 14 26 42 40 50 TO FUEL TANK VENT 15 36 34 46 27 02 48 35 ID0454397
25 ENGINE ELECTRICAL C24X BEGINS WITH S/N: DWPC24XAAH0000750 REF PART NO. NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 QTY DESCRIPTION 195-2200 1 HONDA ENGINE (GX690) W/O AIR 195-1546 2 SPARK PLUG (HONDA GX690) 195-1536 1 FUEL FILTER (HONDA GX690) 195-1533 1 OIL FILTER (HONDA GX690) 105-047 4 LOCKNUT (3/8-NC) 106-390 9 WASHER (M10) 302-2531 1 MANUAL COMPARTMENT - VENTED 105-797 3 SCREW (M6-1.00 X 20MM, BX) 106-237 7 LOCKNUT (M6-1.00,PRV TRQ,NLK) 215-1328 1 RECTIFIER ASSY. REGULATOR 107-366 2 SCREW (M6-1.00 X 30MM, 8.8) 105-162 4 BOLT (3/8-NC X 2-1/4") 301-9878 1 CONTROL MOUNT 106-379 6 FLG LK SCREW (M6-1.00 X 20MM) 106-385 2 FLG LOCKNUT (M6-1.00) 195-1581 1 IGNITION KEY (HONDA GX690) RT12 215-2282 1 SWITCH ASSEMBLY 160-1298 1 PUMP MOUNT KIT - 1.125 105-052 2 BOLT (3/8-NC X 1-1/4") 105-072 2 LOCK WASHER (3/8") 195-1530 1 MUFFLER 301-9876 1 AIR FILTER MOUNT 105-2185 1 P-CLAMP (.625) 195-1583 1 FUEL PUMP (HONDA GX690) 195-2345 1 AIR FILTER (DONALDSON W/PORT) 105-1519 16 BULK HOSE (3/8") LOW PERM 106-712 4 FLG SCREW (M6-1.00 X 16MM) 105-226 1 WASHER (5/16") 107-096 2 LOCKNUT (M8-1.25, NLK) 106-163 2 FLG SCREW (M8-1.25 X 30MM) 111-119 1 STACK CAP 194-038 1 FILTER ELEMENT, PRIMARY 194-039 1 FILTER ELEMENT - SECONDARY 215-0072 1 FAN HARNESS 215-0060 1 BATTERY CABLE (6GA x 36", RED) 215-0042 1 BATTERY CABLE (6GA X 33", BLK) 105-677 4 FLG BOLT (3/8-NC X 1-1/4") 106-083 1 SCREW (M8-1.25 X 20MM) 105-091 1 LOCK WASHER (5/16") 362-2613 2 CLAMP - SQUEEZE (.569-.650) 166-825 1 KEY (1/4" X 1-1/4") 150-5195 1 S/O COUPLER (04H-06H) 150-4906 1 CONNECTOR (M20S-06SF) 154-076 1 CONNECTOR (06J-06S) 150-5021 1 DRAIN HOSE (06JM-06JFX90S-16"-400) 302-3982 1 BATTERY TRAY 302-3983 1 BATTERY HOLD DOWN 106-538 4 LOCKNUT (M6-1.00,PRV TRQ,10.9) 106-848 4 FLG SCREW (M6-1.00 X 25MM) 215-256 1 BATTERY (12V, 200 AMP) REMARKS 5W30 (1.8QT) SEE FOOTNOTE 1 USE LOCTITE 242 OR EQUIVALENT NOTE: 195-1582 STARTER (HONDA GX690) THIS PARTS PAGE SUPERSEDES OLD #ID0425468 FOOTNOTES: 1. PUMP MOUNT KIT 160-1298 COMPONENTS: 160-1217 FLANGED COUPLER (1.25"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242. 02 ID0454397
26 ENGINE ELECTRICAL C24X ENDS WIT S/N: DWPC24XAHH0000749 33 31 46 34 30 28 32 23 27 35 51 TO FUEL TANK PICK-UP 2 3 49 50 24 25 32 15 4 26 19 44 45 20 22 43 1 8 5 6 41 7 9 42 39 41 18 17 29 13 12 29 15 14 48 46 28 TO FUEL TANK VENT 16 12 47 5 6 9 10 11 43 36 38 21 37 05 9 40 ID0425468
27 ENGINE ELECTRICAL C24X ENDS WIT S/N: DWPC24XAHH0000749 REF PART NO. NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 QTY DESCRIPTION 195-2200 1 HONDA ENGINE (GX690) W/O AIR 195-1546 2 SPARK PLUG (HONDA GX690) 195-1536 1 FUEL FILTER (HONDA GX690) 195-1533 1 OIL FILTER (HONDA GX690) 105-047 4 LOCKNUT (3/8-NC) 106-390 9 WASHER (M10) 302-2531 1 MANUAL COMPARTMENT - VENTED 105-797 3 SCREW (M6-1.00 X 20MM, BX) 106-237 11 LOCKNUT (M6-1.00,PRV TRQ,NLK) 215-1328 1 RECTIFIER ASSY. REGULATOR 302-2875 1 BRACKET - BATTERY SUPPORT 107-366 4 SCREW (M6-1.00 X 30MM, 8.8) 105-162 4 BOLT (3/8-NC X 2-1/4") 301-9878 1 CONTROL MOUNT 106-379 6 FLG LK SCREW (M6-1.00 X 20MM) 106-385 2 FLG LOCKNUT (M6-1.00) 195-1581 1 IGNITION KEY (HONDA GX690) RT12 215-2282 1 SWITCH ASSEMBLY 160-1298 1 PUMP MOUNT KIT - 1.125 105-052 2 BOLT (3/8-NC X 1-1/4") 302-0734 2 SPACER- BATTERY BOX 105-072 2 LOCK WASHER (3/8") 195-1530 1 MUFFLER 301-9876 1 AIR FILTER MOUNT 105-2185 1 P-CLAMP (.625) 195-1583 1 FUEL PUMP (HONDA GX690) 195-2345 1 AIR FILTER (DONALDSON W/PORT) 105-1519 16 BULK HOSE (3/8") LOW PERM 106-712 4 FLG SCREW (M6-1.00 X 16MM) 105-226 1 WASHER (5/16") 107-096 2 LOCKNUT (M8-1.25, NLK) 106-163 2 FLG SCREW (M8-1.25 X 30MM) 111-119 1 STACK CAP 194-038 1 FILTER ELEMENT, PRIMARY 194-039 1 FILTER ELEMENT - SECONDARY 215-0072 1 FAN HARNESS 215-0060 1 BATTERY CABLE (6GA x 36", RED) 215-0042 1 BATTERY CABLE (6GA X 33", BLK) 362-1869 1 PLASTIC BATTERY BOX 215-256 1 BATTERY (12V, 200 AMP) 106-595 2 SCREW (M6-1.00 X 60MM) 107-801 2 WASHER (M6) 105-677 4 FLG BOLT (3/8-NC X 1-1/4") 106-083 1 SCREW (M8-1.25 X 20MM) 105-091 1 LOCK WASHER (5/16") 362-2613 2 CLAMP - SQUEEZE (.569-.650) 166-825 1 KEY (1/4" X 1-1/4") 150-5195 1 S/O COUPLER (04H-06H) 150-4906 1 CONNECTOR (M20S-06SF) 154-076 1 CONNECTOR (06J-06S) 150-5021 1 DRAIN HOSE (06JM-06JFX90S-16"-400) REMARKS 5W30 (1.8QT) SEE FOOTNOTE 1 USE LOCTITE 242 OR EQUIVALENT NOTE: 195-1582 STARTER (HONDA GX690) THIS PARTS PAGE SUPERSEDES OLD #ID0401500 FOOTNOTES: 1. PUMP MOUNT KIT 160-1298 COMPONENTS: 160-1217 FLANGED COUPLER (1.25"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242. 05 ID0425468
28 ENGINE ELECTRICAL C30X/VP30 BEGINS WITH S/N: DWPC30XALH0000254 / DWPVP30XLH0000008 7 6 20 10 9 11 1 12 5 2 13 16 17 35 36 37 18 3 14 19 30 4 9 8 23 39 9 8 26 24 40 SEE FOOTNOTE 2 20 31 21 27 9 22 15 25 33 29 32 28 34 38 03 ID0454414
29 ENGINE ELECTRICAL C30X/VP30 BEGINS WITH S/N: DWPC30XALH0000254 / DWPVP30XLH0000008 REF PART NO. NUMBER QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 1 1 1 1 1 1 2 5 2 2 1 4 1 1 1 1 1 1 2 2 1 3 1 1 3 1 1 1 1 2 2 2 1 1 1 1 4 4 1 195-2172 500-2093 195-2477 195-1482 500-2812 194-039 194-038 106-570 105-226 106-329 105-091 160-1298 105-677 166-825 500-2088 115-241 150-4589 150-4588 362-2615 106-561 107-859 215-1863 105-797 302-2531 215-2268 106-237 215-0042 215-0060 215-256 362-1857 106-385 106-712 105-1876 302-3982 195-2476 195-2475 195-2478 106-538 106-848 302-3983 NOT SHOWN: 195-2609 195-2631 195-2644 DESCRIPTION ENGINE - VANGUARD 31HP OIL FILTER LOCK WASHER KEY SWITCH THROTTLE CABLE FILTER ELEMENT - SECONDARY FILTER ELEMENT, PRIMARY SCREW (M8-1.25 X 60MM) WASHER (5/16") SCREW (M8-1.25 X 50MM) LOCK WASHER (5/16") PUMP MOUNT KIT - 1.125 FLG BOLT (3/8-NC X 1-1/4") KEY (1/4" X 1-1/4") FUEL FILTER CAP (04NF) NIPPLE (04N-2" 304SS) CONNECTOR (M14-1.50-04NF) CLAMP - SQUEEZE (.404-.452) LOCKNUT (M8-1.25,PRV TRQ,10.9) NUT, LOCK, #6-32, NYLON INSERT TACHOMETER/HOURMETER SCREW (M6-1.00 X 20MM, BX) MANUAL COMPARTMENT - VENTED FAN HARNESS LOCKNUT (M6-1.00,PRV TRQ,NLK) BATTERY CABLE (6GA X 33", BLK) BATTERY CABLE (6GA x 36", RED) BATTERY (12V, 200 AMP) S/O COUPLER (03H-04H) FLG LOCKNUT (M6-1.00) FLG SCREW (M6-1.00 X 16MM) SCREW (#6-32 X 5/8", SOC ZP) BATTERY TRAY NUT - SWITCH COVER - SWITCH KEY LOCKNUT (M6-1.00,PRV TRQ,10.9) FLG SCREW (M6-1.00 X 25MM) BATTERY HOLD DOWN REMARKS 5W30 2.4QT (79 OZ.) FOOTNOTE 1 USE PIPE THREAD SEALANT STARTER STATOR REGULATOR FOOTNOTES: 1. PUMP MOUNT KIT 160-1298 COMPONENTS. 160-1217 FLANGED COUPLER (1.125"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242 2. TO FUEL TANK VENT. REFER TO FUEL TANK PARTS PAGE - ID0425530 FOR LOCATION. NOTE: THIS PARTS PAGE SUPERSEDES OLD #ID0425524. 03 ID0454414
30 ENGINE ELECTRICAL C30X/VP30 ENDS WITH S/N: DWPC30XAAH0000253 / DWPVP30XAH0000007 7 12 8 9 10 11 6 1 13 14 5 3 44 45 2 4 46 16 19 17 39 18 SEE FOOTNOTE 2 22 35 34 23 29 21 15 20 37 24 25 40 42 31 30 27 26 41 27 28 36 32 11 33 43 38 29 06 ID0425524
31 ENGINE ELECTRICAL C30X/VP30 ENDS WITH S/N: DWPC30XAAH0000253 / DWPVP30XAH0000007 REF PART NO. NUMBER QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 1 1 1 1 1 1 1 1 3 2 3 1 4 1 1 1 1 1 1 1 1 2 1 3 1 1 2 1 7 1 1 1 1 2 1 2 2 2 1 2 2 2 1 1 1 1 195-2172 500-2093 195-2477 195-1482 500-2812 194-039 194-038 106-570 105-226 106-329 105-091 160-1298 105-677 166-825 500-2088 115-241 150-4589 150-4588 362-2615 106-330 106-561 107-859 215-1863 105-797 302-2531 215-2268 106-389 106-078 106-237 215-0042 107-096 215-0060 215-256 106-595 362-1869 107-366 107-801 302-0734 362-1857 106-385 106-712 105-1876 302-2875 195-2476 195-2475 195-2478 NOT SHOWN: 195-2609 195-2631 195-2644 DESCRIPTION ENGINE - VANGUARD 31HP OIL FILTER LOCK WASHER KEY SWITCH THROTTLE CABLE FILTER ELEMENT - SECONDARY FILTER ELEMENT, PRIMARY SCREW (M8-1.25 X 60MM) WASHER (5/16") SCREW (M8-1.25 X 50MM) LOCK WASHER (5/16") PUMP MOUNT KIT - 1.125 FLG BOLT (3/8-NC X 1-1/4") KEY (1/4" X 1-1/4") FUEL FILTER CAP (04NF) NIPPLE (04N-2" 304SS) CONNECTOR (M14-1.50-04NF) CLAMP - SQUEEZE (.404-.452) SCREW (M8-1.25 X 70MM) LOCKNUT (M8-1.25,PRV TRQ,10.9) NUT, LOCK, #6-32, NYLON INSERT TACHOMETER/HOURMETER SCREW (M6-1.00 X 20MM, BX) MANUAL COMPARTMENT - VENTED FAN HARNESS WASHER (M8) NUT (M8-1.25) LOCKNUT (M6-1.00,PRV TRQ,NLK) BATTERY CABLE (6GA X 33", BLK) LOCKNUT (M8-1.25, NLK) BATTERY CABLE (6GA x 36", RED) BATTERY (12V, 200 AMP) SCREW (M6-1.00 X 60MM) PLASTIC BATTERY BOX SCREW (M6-1.00 X 30MM, 8.8) WASHER (M6) SPACER- BATTERY BOX S/O COUPLER (03H-04H) FLG LOCKNUT (M6-1.00) FLG SCREW (M6-1.00 X 16MM) SCREW (#6-32 X 5/8", SOC ZP) BRACKET - BATTERY SUPPORT NUT - SWITCH COVER - SWITCH KEY REMARKS 5W30 2.4QT (79 OZ.) FOOTNOTE 1 USE PIPE THREAD SEALANT STARTER STATOR REGULATOR FOOTNOTES: 1. PUMP MOUNT KIT 160-1298 COMPONENTS. 160-1217 FLANGED COUPLER (1.125"), 160-1218 FLANGED COUPLER (9T-.625") AND 160-1219 SPIDER INSERT GREEN. TORQUE COUPLING BOLT TO 35 FT-LB. USE LOCTITE 242 2. TO FUEL TANK VENT. REFER TO FUEL TANK PARTS PAGE - ID0425530 FOR LOCATION. NOTE: THIS PARTS PAGE SUPERSEDES OLD #ID0399785. 06 ID0425524
32 FUEL TANK 17 C24X ENDS WITH S/N: XXXXX C30X ENDS WITH S/N: XXXXX 16 21 11 10 15 24 24 20 22 15 9 15 2 13 15 1 11 3 10 8 12 15 23 18 19 7 14 4 6 03 10 5 ID0401441
33 FUEL TANK C24X ENDS WITH S/N: XXXXX C30X ENDS WITH S/N: XXXXX REF PART NO. NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 QTY DESCRIPTION 105-1517 24 BULK HOSE (1/4") LOW PERM 150-4500 1 S/O COUPLER (04N-04H90) 118-096 12 BULK FUEL TUBING (1/4",PER FT) 301-9183 1 TANK - FUEL 105-2011 1 FUEL GAUGE GROMMET 115-165 1 PLUG (08N, SOC) 195-2250 1 FUEL GAUGE 302-0353 1 FILL NECK 362-1479 1 FUEL CAP (RATCHET 2.25") 105-1795 6 FLG LK SCREW (M8-1.25 X 20mm) SERRATED 106-386 3 FLG LOCKNUT (M8-1.25) 302-0355 1 PLATE - FUEL FILL 150-4758 1 S/O COUPLER (02N-03H) 105-712 1 SET SCREW (1/4-NC X 1/4", CUP) 105-1516 29 BULK HOSE (3/16") LOW PERM 362-2088 1 GROMMET (.875) 362-1530 1 SLOSH VALVE 157-022 1 O-RING (224 D90) 150-4496 1 S/O ELBOW (02N-02H) 150-4830 1 TEE 03H - 03H - 03H 302-0599 1 MOUNT - ROLL OVER VALVE 362-2618 1 GROMMET (3/8") 150-4499 1 FUEL PICK-UP 110-249 7 WORM CLAMP (1/4" TO 5/8") REMARKS USED ON C30X ONLY. SEE FOOTNOTE 1 USED ON C30X ONLY. SEE FOOTNOTE 2 USE PIPE THREAD SEALANT (6" FILLNECK TO TEE; 2" TEE TO SLOSH VALVE; 21" TEE TO TANK) NOT SHOWN: FOOTNOTES: 1. USE 105-1518 BULK HOSE (5/16") LOW PERM ON C24X. 22.00" LENGTH 2. USE 150-4497 S/O COUPLER (04N-05H90) ON C24X. NOTE: 03 ID0401441
34 FUEL TANK C24X BEGINS WITH S/N: DWPC24XAVH0000391 C30X BEGINS WITH S/N: DWPC30XAPH0000150 9 2 20 TO FUEL FILTER 1 17 3 11 10 1 13 12 TO ENGINE VENT 20 19 18 15 8 21 7 14 16 4 6 06 10 5 ID0425530
35 FUEL TANK C24X BEGINS WITH S/N: DWPC24XAVH0000391 C30X BEGINS WITH S/N: DWPC30XAPH0000150 REF PART NO. NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 QTY DESCRIPTION 105-1517 45 BULK HOSE (1/4") LOW PERM 150-4500 1 S/O COUPLER (04N-04H90) 118-096 12 BULK FUEL TUBING (1/4",PER FT) 301-9183 1 TANK - FUEL 105-2011 1 FUEL GAUGE GROMMET 115-165 1 PLUG (08N, SOC) 195-2250 1 FUEL GAUGE 302-0353 1 FILL NECK 362-1479 1 FUEL CAP (R
This manual contains illustrated parts lists to help you select quality Ditch Witch replacement parts for your Ditch Witch equipment. Using other replacement parts will . . 270-6893 TRENCHER RAISE/LOWER 270-6829 DIGGING CHAIN FORWARD/REVERSE 270-6827 275-419 1 1 WARNING NO FLAME 270-6900 DANGER CHAIN AND AUGER 270-6899 1 PARKING BRAKE 270 .
Dozer Blade Parts, Crawler Loader Parts, Suspension Parts. Section C 2015 Parts Catalog SECTION C DOZER BLADE PARTS, CRAWLER LOADER PARTS, DOZER SUSPENSION PARTS Page BLADE & C-FRAME PARTS CASE C2-C9. DRESSER C18-C19: JOHN DEERE C10-C17; C-FRAMES. CASE C5. JOHN DEERE C13, C15: CRAWLER LOADER PARTS. CASE C1. JOHN DEERE C1:
Parts, Inspection and Maintenance 17 Warranty Statement and Service Policy 18 Specifications: P220 & P245 19 P225 20 P226 21 P228 22 P229 23 P239 24 Parts Diagram - P220 26 Parts List - P220 27 Parts Diagram - P225 28 Parts List - P225 29 Parts Diagram - P226 30 Parts List - P226 31 Parts Diagram - P228 32 Parts List - P228 33 Parts Diagram .
parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information:--Ref-- column refers to the reference number on the parts illustration.
The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of .
HOW TO USE THIS MANUAL 1--2 6100 Electric 330250 (6--2007) FINDING A TENNANT PART NUMBER This manual contains the following sections:-- HOW TO USE THIS MANUAL-- STANDARD PARTS-- OPTIONS-- BREAKDOWNS-- CROSS REFERENCE The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order:-- General wear parts.
The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists.
-- CROSS REFERENCE The LOW DUMP PARTS and MULTI--LEVEL DUMP PARTS section lists repair parts for standard machines. They are grouped in this general order:-- General wear parts.-- Machine frame and related parts.-- Machine propelling system.-- Sweeping components.-- Electrical
According to ASTM E562-08 [8] a manual point-count on 30 evenly distributed fields with a 100-point-layer each on a Olympus BX60M with a JVC TK-C181 Color-video-camera, using the Piscara 9.4-software was conducted, from which the porosity could be calculated. adhesion (glue and braze testing) According to ASTM C633 [9] a tensile-strength-test on glued and brazed coatings with a surface .
