Material Safety Data Sheet SECTION 1: PRODUCT AND COMPANY .
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/10Material Safety Data SheetCopyright, 2010, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properlyutilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement isobtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profitthereon.SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and10103MANUFACTURER: 3MDIVISION: Construction and Home Improvement MarketsADDRESS: 3M CenterSt. Paul, MN 55144-1000EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)Issue Date: 10/29/10Supercedes Date: 10/29/10Document Group: 11-1756-3Product Use:Intended Use:paint and varnish removerSECTION 2: INGREDIENTSIngredientC.A.S. No.% by WtWATERDIMETHYL ADIPATEDIMETHYL 7-065 - 7520 - 301- 51- 5SECTION 3: HAZARDS IDENTIFICATION3.1 EMERGENCY OVERVIEWOdor, Color, Grade: off white, slight ester odor.General Physical Form: LiquidImmediate health, physical, and environmental hazards:3.2 POTENTIAL HEALTH EFFECTSPage 1 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/10Eye Contact:Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing.Skin Contact:Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching.Inhalation:Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose andthroat pain.Ingestion:Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.SECTION 4: FIRST AID MEASURES4.1 FIRST AID PROCEDURESThe following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices arefollowed.Eye Contact:Skin Contact:Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.Wash affected area with soap and water. If signs/symptoms develop, get medical attention.Inhalation: Remove person to fresh air.If signs/symptoms develop, get medical attention.If Swallowed:Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Nevergive anything by mouth to an unconscious person. Get medical attention.SECTION 5: FIRE FIGHTING MEASURES5.1 FLAMMABLE PROPERTIESAutoignition temperatureFlash PointFlammable Limits - LELFlammable Limits - UELNo Data AvailableNot ApplicableNo Data AvailableNo Data Available5.2 EXTINGUISHING MEDIAMaterial will not burn.Page 2 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/105.3 PROTECTION OF FIRE FIGHTERSSpecial Fire Fighting Procedures:(SCBA).Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatusUnusual Fire and Explosion Hazards:Not applicable.Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decompositioninformation.SECTION 6: ACCIDENTAL RELEASE MEASURESPersonal precautionsEvacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate thearea with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, inaccordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases orvapors in the spill area to burn or explode.Environmental proceduresFor larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Place in a closed containerapproved for transportation by appropriate authorities.Clean-up methodsContain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially availableinorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible.Seal the container.In the event of a release of this material, the user should determine if the release qualifies as reportable according tolocal, state, and federal regulations.SECTION 7: HANDLING AND STORAGE7.1 HANDLINGDo not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid breathing of vapors,mists or spray. Avoid eye contact with vapors, mists, or spray. Keep out of the reach of children. Avoid contact with oxidizingagents.7.2 STORAGEStore away from acids. Store away from oxidizing agents.SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 ENGINEERING CONTROLSUse with appropriate local exhaust ventilation. Provide local exhaust ventilation at transfer points. Use in a well-ventilated area. Ifexhaust ventilation is not available, use appropriate respiratory protection. Use general dilution ventilation and/or local exhaustventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation isnot adequate, use respiratory protection equipment.Page 3 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/108.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)8.2.1 Eye/Face ProtectionAvoid eye contact with vapors, mists, or spray.8.2.2 Skin ProtectionAvoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposureassessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.If irritation of the skin occurs, discontinue use. The use of gloves is recommended for removal of the stripper and paint residue ifprolonged contact may occur. Wash thoroughly after use.8.2.3 Respiratory ProtectionAvoid breathing of vapors, mists or spray. Consult the current 3M Respirator Selection Guide for additional information or call 1800-243-4630 for 3M technical assistance.8.2.4 Prevention of SwallowingDo not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.8.3 EXPOSURE GUIDELINESIngredientAuthorityDIMETHYL ADIPATECMRGDIMETHYL GLUTARATECMRGTypeTWA, as DimethylEstersTWA, as DimethylEstersLimitAdditional Information1.5 ppm1.5 ppmSOURCE OF EXPOSURE LIMIT DATA:ACGIH: American Conference of Governmental Industrial HygienistsCMRG: Chemical Manufacturer Recommended GuidelineOSHA: Occupational Safety and Health AdministrationAIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)SECTION 9: PHYSICAL AND CHEMICAL PROPERTIESOdor, Color, Grade:General Physical Form:Autoignition temperatureFlash PointFlammable Limits - LELFlammable Limits - UELBoiling pointDensityVapor Densityoff white, slight ester odor.LiquidNo Data AvailableNot ApplicableNo Data AvailableNo Data Available 100 ºCNo Data AvailableNo Data AvailableVapor PressureApproximately 8 mmHg [Details: CONDITIONS: 77 degrees F]Page 4 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/10Specific GravitypHMelting pointSolubility In Water1.00 - 1.03 [Ref Std: WATER 1]Approximately 7No Data AvailableNo Data AvailableEvaporation rateApproximately 1 [Ref Std: WATER 1] [Details: CONDITIONS:Estimated, based on formulation.]Approximately 216 g/l [Test Method: South Cost Air Qual MgmtDist]No Data Available94 - 97 % weightNo Data Available60000.0 - 110000.0 centipoiseVolatile Organic CompoundsKow - Oct/Water partition coefPercent volatileVOC Less H2O & Exempt SolventsViscositySECTION 10: STABILITY AND REACTIVITYStability: Stable.Materials and Conditions to Avoid:10.1 Conditions to avoidTemperatures above the boiling point10.2 Materials to avoidStrong acidsStrong basesStrong oxidizing agentsHazardous Polymerization: Hazardous polymerization will not occur.Hazardous Decomposition or By-ProductsSubstanceConditionCarbon monoxideCarbon dioxideNot SpecifiedNot SpecifiedSECTION 11: TOXICOLOGICAL INFORMATIONPlease contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or itscomponents.SECTION 12: ECOLOGICAL INFORMATIONECOTOXICOLOGICAL INFORMATIONNot determined.Page 5 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/10CHEMICAL FATE INFORMATIONNot determined.SECTION 13: DISPOSAL CONSIDERATIONSWaste Disposal Method: Incinerate in an industrial or commercial facility in the presence of a combustible material.EPA Hazardous Waste Number (RCRA): Not regulatedSince regulations vary, consult applicable regulations or authorities before disposal.SECTION 14:TRANSPORT INFORMATIONID Number(s):70-0702-4874-8, 70-0702-4875-5, 70-0702-4876-3, 70-0702-5448-0, 70-0702-5449-8, 70-0702-5450-6, 70-0703-1086-0, 70-07031087-8, 70-0703-5787-9, 70-0703-6043-6, 70-0703-6073-3, 70-0703-6149-1, 70-0703-8518-5, 70-0703-8789-2, 70-0704-1340-9, 700704-1382-1, 70-0704-1931-5, 70-0704-1932-3, 70-0704-6281-0, 70-0704-7032-6, 70-0704-7033-4, 70-0704-7034-2, 70-0704-71043, 70-0705-2898-2, 70-0705-5395-6, 70-0705-8855-6, 70-0705-8856-4, 70-0705-8857-2, 70-0706-3646-2, 70-0707-9597-9, 70-07079598-7, 70-0707-9599-5, 70-0711-8727-5, 70-0714-9458-0, XT-0004-4414-8For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.SECTION 15: REGULATORY INFORMATIONUS FEDERAL REGULATIONSContact 3M for more information.311/312 Hazard Categories:Fire Hazard - No Pressure Hazard - NoReactivity Hazard - NoImmediate Hazard - YesDelayed Hazard - NoSTATE REGULATIONSContact 3M for more information.CHEMICAL INVENTORIESThe components of this product are in compliance with the chemical notification requirements of TSCA.All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),or are exempt polymers whose monomers are listed on EINECS.Page 6 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/10Contact 3M for more information.INTERNATIONAL REGULATIONSContact 3M for more information.This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.SECTION 16: OTHER INFORMATIONNFPA Hazard ClassificationHealth: 1Flammability: 0Reactivity: 0Special Hazards: NoneNational Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that arepresented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on theinherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known tobe generated in significant quantities.HMIS Hazard ClassificationHealth: 1Flammability: 0Reactivity: 0Protection: BHazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. Theseratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergencysituations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint andCoatings Association (NPCA).Reason for Reissue: The MSDS has been revised because 3M has adopted the 16-section ANSI/ISO format. The potential hazardsof the product have not changed. We encourage you to reread the MSDS and review the information.Revision Changes:Section 2: Ingredient table was modified.Copyright was modified.Section 6: Release measures information was deleted.Section 6: Release measures heading was deleted.Section 8: Engineering controls information was modified.Section 8: Skin protection phrase was modified.Section 8: Prevention of swallowing information was modified.Section 10: Materials and conditions to avoid physical property was deleted.Section 14: Transportation legal text was modified.Section 9: Property description for optional properties was modified.Section 14: ID Number(s) Template 1 was modified.Section 6: Environmental procedures heading was added.Section 6: Personal precautions heading was added.Section 10.1 Conditions to avoid heading was added.Section 10.2 Materials to avoid heading was added.Page 7 of 8
MATERIAL SAFETY DATA SHEET Safest Stripper(TM) Paint and Varnish Remover, Catalog Nos. 10100, 10101, 10102, and 1010310/29/10Section 6: Personal precautions information was added.Section 6: Environmental procedures information was added.Section 6: Methods for cleaning up information was added.Section 10: Materials to avoid physical property was added.Section 10: Conditions to avoid physical property was added.Section 8: Hand protection information was added.Section 6: Clean-up methods heading was added.DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OFTRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method ofuse or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquelywithin the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for aparticular purpose and suitable for user's method of use or application.3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer mayhave resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.3M MSDSs are available at www.3M.comPage 8 of 8
MATERIAL SAFETY DATA SHEET 3M(TM) Super 77(TM) Multipurpose Adhesive (Aerosol)09/07/12Material Safety Data SheetCopyright, 2012, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properlyutilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement isobtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profitthereon.SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: 3M(TM) Super 77(TM) Multipurpose Adhesive (Aerosol)MANUFACTURER: 3MDIVISION: Construction and Home Improvement MarketsADDRESS: 3M Center, St. Paul, MN 55144-1000EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)Issue Date: 09/07/12Supercedes Date: 08/23/12Document Group: 22-4025-7Product Use:Intended Use:Specific Use:Adhesive aerosolGeneral Purpose Aerosol adhesiveSECTION 2: INGREDIENTSIngredientC.A.S. No.NON-VOLATILE COMPONENTS (NJ TRADE SECRET # BUTANEHEXANETrade 75-83-2110-54-3% by Wt20 - 3020 - 3015 - 2510 - 203- 73- 71- 31- 3 0.8SECTION 3: HAZARDS IDENTIFICATION3.1 EMERGENCY OVERVIEWSpecific Physical Form: AerosolOdor, Color, Grade: clear, sweet fruity odorGeneral Physical Form: LiquidPage 1 of 8
MATERIAL SAFETY DATA SHEET 3M(TM) Super 77(TM) Multipurpose Adhesive (Aerosol)09/07/12Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure andexplode. Extremely flammable liquid and vapor. Vapors may travel long distances along the ground or floor to an ignition source andflash back. Aerosol container contains flammable material under pressure.May cause target organ effects. Contains achemical or chemicals which can cause birth defects or other reproductive harm.3.2 POTENTIAL HEALTH EFFECTSEye Contact:Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.Skin Contact:Prolonged or repeated exposure may cause:Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching.Inhalation:Intentional concentration and inhalation may be harmful or fatal.Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and noseand throat pain.May be absorbed following inhalation and cause target organ effects.Ingestion:Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.May be absorbed following ingestion and cause target organ effects.Target Organ Effects:Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination,nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.Prolonged or repeated exposure may cause:Peripheral Neuropathy: Signs/symptoms may include tingling or numbness of the extremities, incoordination, weakness ofthe hands and feet, tremors and muscle atrophy.Contains a chemical or chemicals which can cause birth defects or other reproductive harm.SECTION 4: FIRST AID MEASURES4.1 FIRST AID PROCEDURESThe following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices arefollowed.Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.Skin Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention.Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.If Swallowed:Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Nevergive anything by mouth to an unconscious person. Get medical attention.SECTION 5: FIRE FIGHTING MEASURESPage 2 of 8
MATERIAL SAFETY DATA SHEET 3M(TM) Super 77(TM) Multipurpose Adhesive (Aerosol)09/07/125.1 FLAMMABLE PROPERTIESAutoignition temperatureFlash PointFlammable Limits(LEL)Flammable Limits(UEL)OSHA Flammability Classification:No Data Available-42.00 ºF [Test Method: Tagliabue Closed Cup]No Data AvailableNo Data AvailableClass IA Flammable Liquid5.2 EXTINGUISHING MEDIAUse fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).5.3 PROTECTION OF FIRE FIGHTERSSpecial Fire Fighting Procedures:(SCBA).Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatusUnusual Fire and Explosion Hazards: Closed containers exposed to heat from fire may build pressure and explode. Extremelyflammable liquid and vapor. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Aerosolcontainer contains flammable material under pressure.Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decompositioninformation.SECTION 6: ACCIDENTAL RELEASE MEASURES6.1. Personal precautions, protective equipment and emergency proceduresEvacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Read andfollow safety precautions on the solvent label and MSDS.6.2. Environmental precautionsPlace in a metal container approved for transportation by appropriate authorities. Dispose of collected material as
HMIS(r) is a registered mark of the National Paint and Coatings Association (NPCA). Reason for Reissue: The MSDS has been revised because 3M has adopted the 16 -section ANSI/ISO format. The potential hazards of the product have not changed. We encourage you to reread the MSDS and review the information. Revision Changes:
Sheet 5 Sheet 6 Sheet 7 Sheet 8 Sheet 9 Sheet 10 Sheet 11 Sheet 12 Sheet 13 Sheet 2 Sheet 1 Sheet 3 Basic Information About Notes Lines and Spaces Trace Notes Stems Note Properties Writing Music Find the Way Home Crossword Puzzle Counting Notes Notes and Beats in 4/4 time Double Puzzle N
MATERIAL SAFETY DATA SHEET _ Product Name Pool Season Chlorinating Concentrate Product id EPA Reg. No. 69470-20-71141 _ Supersedes 14/12/2000 Revision date 28/07/2003 Revision: 2 16. Other information This data sheet contains changes from the previous version in section(s) 3, 15 The information in this Material Safety Data Sheet should .
PLASKOLITE, INC. PRODUCTS: Acrylic Sheet Impact Modified Acrylic Sheet Copolyester Sheet Roll Stock Acrylic Sheet Colored Acrylic Sheet Patterned Sheet High Performance Coatings Thin & Thick Gauge Acrylic Sheet Frosted Acrylic Sheet Acrylic Sheet with Matte Finish Polystyrene Sheet Acrylic Mirror Sheet Acrylic
s.no. document/ drawing no. rev. no. pages page no. ii volume ii of ii 1 mr p.013751 d11071 101 1 12 1 2 data sheet p.013751 d 11087 006 0 2 13 3 data sheet p.013751 d 11087 007 0 2 15 4 data sheet p.013751 d 11087 008 1 2 17 5 data sheet p.013751 d 11087 009 1 2 19 6 data sheet p.013751 d 11087 013 0 2 21 7 data sheet p.013751 d 11087 014 0 2 23 8 data sheet p.013751 d 11087 010 1 2 25
The Create Sheet from Symbol command is for top-down design. Once the top sheet is fully defined, this command creates the sub-sheet for the chosen sheet symbol and places matching ports on it. The Create Symbol from Sheet command is for bottom-up design, creating a sheet symbol with sheet entries based on the chosen sub-sheet. This is the mode .
Cissp cheat sheet all domains. Cissp cheat sheet 2022 pdf. Cissp cheat sheet 2022. Cissp cheat sheet domain 4. Cissp cheat sheet pdf. Cissp cheat sheet 2021. Cissp cheat sheet domain 1. Cissp cheat sheet reddit. We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements.
SAFETY DATA SHEET (according to Regulation (EC) No. 1907/2006 ) PLEDGE Aerosol - Multi-Surface Classic Version 1.1 Print Date 01.10.2014 : : SAFETY DATA SHEET PLEDGE Aerosol - Multi-Surface Classic 1. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its .
Safety Data Sheet Cover-Sheet – This page provides additional New Zealand specific information for this product, and must be read in conjunction with the Safety Data Sheet (SDS) attached. Product Name: G-CEM Capsules Manufacturer: GC
