Q-Checker For V5 Release 5.7 Installation Guide
Q-Checker for V5 Release 5.7Installation GuideDocument version: 2019-03-26
Contents1Legal Notices . 42Conventions in this manual . 63System Requirements . 74Installing on Windows using the installer . 95Silent installation . 146Uninstalling on Windows using the installer . 167Installing manually on Windows . 178Installing on UNIX . 198.1Overview . 198.2Unpacking the installation package . 198.3Creating a new CATIA environment . 208.4Extending an existing CATIA environment . 219Environment Variables . 239.1Q-Checker application path variables . 239.2Q-Checker application settings . 249.3Database connection variables . 289.4PDM Save variables . 2810Directory structure of a Q-Checker installation . 3011Q-Checker startup script . 3212Enrolling licenses . 3313Adding Q-Checker environments to the installation . 34Installing an environment . 34Dassault Systèmes2Q-Checker for V5 Release 5.7
14Troubleshooting . 35Dassault Systèmes3Q-Checker for V5 Release 5.7
Installation GuideLegal Notices–1Legal NoticesQ-Checker is 2000-2019 Dassault Systèmes.This page specifies the patents, trademarks, copyrights, and restricted rights for theQ-Checker for V5, Q-PLM for V5 and Q-Monitor for V5 Release 5.7:TrademarksQ-Checker, Q-PLM and Q-Monitor, 3DEXPERIENCE, the Compass logo and the 3DSlogo, CATIA, SOLIDWORKS, ENOVIA, DELMIA, SIMULIA, GEOVIA, EXALEAD, 3D VIA,BIOVIA, NETVIBES, 3DSWYM and 3DEXCITEare commercial trademarks or registeredtrademarks of Dassault Systèmes, a French "société européenne" (Versailles Commercial Register # B 322 306 440), or its subsidiaries in the U. S. and/or other countries. Allother trademarks are owned by their respective owners. Use of any Dassault Systèmesor its subsidiaries trademarks is subject to their express written approval.DS Offerings and services names may be trademarks or service marks of DassaultSystèmes or its subsidiaries.Third-Party Copyrights NoticesCertain portions of the Q-Checker for V5, Q-PLM for V5 and Q-Monitor for V5Release 5.7 contain elements subject to copyright owned by the following entities:@ Digia@ IBMThe Q-Checker for V5, Q-PLM for V5 and Q-Monitor for V5 Release 5.7 include opensource software components. Source code for these components is available uponrequest. The original licensors of said open source software components provide themon an "as is" basis and without any liability whatsoever to customer (or licensee).IP Asset NameIP Asset VersionCopyright noticeAXIS2C1.6 Apache Software FoundationAXIS2J1.5 Apache Software FoundationNA OpenSSL Development teamUnder Apache 2.0Under OpenSSL licenseOpenSSLRestricted RightsThis clause applies to all acquisitions of Dassault Systèmes Offerings by or for theUnited States federal government, or by any prime contractor or subcontractor (at anytier) under any contract, grant, cooperative agreement or other activity with the federalDassault Systèmes4Q-Checker for V5 Release 5.7
Legal NoticesInstallation Guidegovernment. The software, documentation and any other technical data provided hereunder is commercial in nature and developed solely at private expense. The Software isdelivered as "Commercial Computer Software" as defined in DFARS 252.227-7014 (June1995) or as a "Commercial Item" as defined in FAR 2.101(a) and as such is providedwith only such rights as are provided in Dassault Systèmes standard commercial enduser license agreement. Technical data is provided with limited rights only as providedin DFAR 252.227-7015 (Nov. 1995) or FAR 52.227-14 (June 1987), whichever is applicable. The terms and conditions of the Dassault Systèmes standard commercial enduser license agreement shall pertain to the United States government's use and disclosure of this software, and shall supersede any conflicting contractual terms and conditions. If the DS standard commercial license fails to meet the United Statesgovernment's needs or is inconsistent in any respect with United States Federal law, theUnited States government agrees to return this software, unused, to DS. The followingadditional statement applies only to acquisitions governed by DFARS Subpart 227.4(October 1988): "Restricted Rights - use, duplication and disclosure by the Governmentis subject to restrictions as set forth in subparagraph (c)(l)(ii) of the Rights in TechnicalData and Computer Software clause at DFARS 252-227-7013 (Oct. 1988)Q-Checker is 2000-2019 Dassault Systèmes.Dassault Systèmes5Q-Checker for V5 Release 5.7
Installation GuideConventions in this manual2Conventions in this manualCAUTION: The signal word “CAUTION” indicates that a certain action may causeunintended results and the loss of data.Syntax notation for command line input and text-based inputFett:Boldface marks text to be typed as shown.Italics:Italics mark text to be replaced by the required parameter value.[ ]Square brackets mark an optional parameter. Include this parameter, ifrequired.{ }Braces mark a list of parameters, which are separated by vertical bars.Include one of the given parameters. The parameter before the ellipsis may be included more than once.Dassault Systèmes6Q-Checker for V5 Release 5.7
Installation GuideSystem Requirements3System Requirements NOTE: Q-Checker is supported only on systems certified for the corresponding CATIArelease. For detailed software requirements, refer to the CATIA Program Directory thatis included with CATIA software.Supported operating systems Microsoft Windows 7 Enterprise / Pro Edition 64-bit RTM or SP1 Microsoft Windows 8 Desktop Enterprise / Pro Edition 64-bit Microsoft Windows 10 Desktop Enterprise / Pro Edition 64-bit (V5-6R2016 or later) IBM AIX 7.1 64-bit (V5-6R2017)The Q-Checker environment editor is only available for Microsoft Windows.CATIA versions and releasesQ-Checker Release 5.7 is available for CATIA V5-6R2016 or later.Supported CATIA platforms and required packagesAll CATIA platforms are supported: P1, P2, P3, PLM Express.Depending on the CATIA platform, the following CATIA configuration packages mustbe installed and the following licenses must be available:PlatformsRequired configurationsRequired licensesCATIA P1All configuration packagesAt least MD1CATIA P2At least EI2 MD2 PM2 SA2configuration and PX1 productAt least MD2CATIA P3On requestOn requestTo use certain composites criteria, a CATIA CD3 license is required.To use criterion MML (Multi-Model Link Not Published), a CATIA PX1 license isrequired.License serverQ-Checker Release 5.7 requires Dassault Systèmes License Server:Dassault Systèmes7Q-Checker for V5 Release 5.7
Installation GuideSystem RequirementsQ-Checker Release 5.7 for:Minimum required DSLS releaseCATIA V5-6R20142014xCATIA V5-6R20152015xCATIA V5-6R20162016xCATIA V5-6R20172017xCATIA V5-6R20182018xCATIA V5-6R20192019xTo download DSLS, visit this website: mes-license-server/Other required software HTML browser for viewing check reports in HTML format PDF viewer for viewing and printing the documentation in PDF formatDassault Systèmes8Q-Checker for V5 Release 5.7
Installation GuideInstalling on Windows using the installer4Installing on Windows using the installer NOTE: In some cases, the installer cannot be used, for example when installingQ-Checker on a server. Instead, you can manually install Q-Checker from an archive. Chapter 7 Installing manually on Windows, page 171 Q-Checker installation packages are specific to CATIA releases. Choose the correctQ-Checker installation package for the installed version of CATIA.2 Run the installer. To proceed, make the required settings, then click “Next”. To change settings in a previous step, click “Back” repeatedly until you reach therespective dialog. To abort the installation, click “Cancel”.3 The installer looks up installations of the respective CATIA release on your computer.Select the installation of CATIA for which Q-Checker will be installed.If no matching CATIA installation is found, the installer displays an error message andaborts the installation.4 Choose the type of installation: “Complete”: Install all components of Q-Checker “Custom”: Install only selected components of Q-Checker (see the next step).Dassault Systèmes9Q-Checker for V5 Release 5.7
Installation GuideInstalling on Windows using the installer5 If you have selected a “Custom” installation:Select which components to install: “Q-Checker program files”: Main Q-Checker application “Model type configurator”: Utility for creating a root-feature attribute for model typerecognition by Q-Checker.In the “Destination folder” field, select the path where Q-Checker will be installed.6 In case of a complete installation, select the path where Q-Checker will be installed.Dassault Systèmes10Q-Checker for V5 Release 5.7
Installation GuideInstalling on Windows using the installer7 Select the path where Q-Checker will store the report files.8 Select the path where Q-Checker will store user-defined environments and user settingsfiles.9 To make Q-Checker available in CATIA, a CATIA environment must exist where theapplication paths and other variables are defined. Select an option:Dassault Systèmes11Q-Checker for V5 Release 5.7
Installation GuideInstalling on Windows using the installer “Create a new environment” (recommended): You are prompted to confirm the pathand name of the new environment. The name of the environment must not containblanks. “Modify an existing environment”. You are prompted to select a CATIA environmentfrom the environment folder.An existing environment must not contain Q-Checker variables; otherwise theinstaller cannot modify this environment.10 Choose whether to use Q-Checker with or without database connection.Database connection can send results to a database for analysis with QMonitor. A separate license is required to use database connection.11 The installer is now ready to install Q-Checker with the settings that you have specified.Dassault Systèmes12Q-Checker for V5 Release 5.7
Installation GuideInstalling on Windows using the installerTo install Q-Checker, click “Next”. To review a setting, click “Back”. When the installation has finished, shortcuts to CATIA with Q-Checker and to theQ-Checker environment editor are created on the Windows Desktop. Use theseshortcuts to start the respective applications.Dassault Systèmes13Q-Checker for V5 Release 5.7
Installation GuideSilent installation5Silent installationThe Windows installer allows for silent installation. This means, the installation of thesoftware can be recorded on a reference computer and repeated on further computerswithout user input.PreparationsTo prepare for silent installation, run the installer once on a reference computer torecord the chosen settings in a response file.To do this, start the installer at the command line.Command line syntax install exe /r [/f1" response file "] install exe Path and file name of the installer. response file Path and file name of the response file where the installation isrecorded.If you leave out parameter /f1, the response file is written to %SYSTEMROOT%\setup.iss.Running a silent installationTo install the software with the recorded settings, run the installer from the commandline and specify the location of the response file:Command line syntax install exe /s [/f1" response file "] [/f2" log file "] install exe Path and file name of the installer. response file Path and file name of the response file to which the installation hasbeen recorded.If you leave out parameter /f1, the response file is expected at %SYSTEMROOT%\setup.iss. log file Path and file name of the log file where the results of the silent installationare recorded.If you leave out parameter /f2, the log file will be written to a file with the same pathand name as the response file, but with the extension log.The result of a silent installation can be determined from the result code in the log file.Result code 0 means that the installation has finished successfully:Dassault Systèmes14Q-Checker for V5 Release 5.7
Installation GuideSilent installation.[ResponseResult]ResultCode 0. A complete list of result codes can be found in the Installshield documentation.Search the internet for “Installshield Checking for Errors Using the Setup.log File ”Example Install and write settings to a response file:product setup.exe /r /f1"c:\temp\setup.iss" Installation with identical settings (command in a single line):product setup.exe /s lt Systèmes15Q-Checker for V5 Release 5.7
Installation GuideUninstalling on Windows using the installer6Uninstalling on Windows using the installer1 In Windows, go to “Start” “Settings” “Control Panel” “Add or Remove Programs”.2 In the “Software” dialog, select the version of Q-Checker to uninstall.3 Click “Remove” and follow the instructions on screen.4 After the installer has finished, you can delete manually directories and files created byQ-Checker.Dassault Systèmes16Q-Checker for V5 Release 5.7
Installation GuideInstalling manually on Windows7Installing manually on WindowsManual installation on Windows is intended for cases in which the installer cannot beused, for example on a server where no local CATIA environment files are available.To integrate Q-Checker with CATIA, you can create a new CATIA environment or modifyan existing CATIA environment.The following instruction assumes that you use the CATIA Environment Editor. Alternatively, you can edit an existing CATIA environment file manually.1 Q-Checker installation packages are specific to CATIA releases. Choose the correctQ-Checker installation package for the installed version of CATIA.2 Unpack the installation archive and move the unpacked directory to the desiredlocation.3 Start the CATIA Environment Editor. In Windows, click “Start” “Programs” “CATIA Pn” “Tools” “Environment Editor”.4 In the CATIA Environment Editor, select the environment that you want to modify.5 Click “Environment” “New from existing.”.6 In the “Name” field, enter a name for the new environment.7 Select the “Add a new path” option.8 In the “Install Path” field, append a semicolon (;) and the full path to the Q-Checkerload directory.ExampleC:\catiaV5\r21;C:\Q-Checker V5R21 5xx\load9 Click “OK”.10 Add the required environment variables to the CATIA environment.To add a new variable, right-click the list of variables, then click “New Variable” on thecontext menu. Environment variables: Chapter 9 Environment Variables, page 2311 When you have finished, click “Environment” “Quit”.Create a shortcut to the Q-Checker environment editorThe Q-Checker environment editor can be started separately from the CATIA session.To do this, use the following command: qc install \load\win b64\code\bin\TCAPEMain.exe -env envfile.txt -direnv envdir Dassault Systèmes17Q-Checker for V5 Release 5.7
Installing manually on WindowsInstallation Guide qc install Q-Checker installation path. envfile.txt Name and extension of the CATIA environment file with Q-Checker integration. direnv Directory path of the CATIA environment file with Q-Checker integration.Paths containing blanks must be set in quotation marks.Example"c:\Program Files\Q-Checker\win b64\code\bin\TCAPEMain.exe" -env CATIAQC.txt -direnv c:\catiav5\catenv\R24We recommend adding a shortcut for starting the Q-Checker environment editor, forexample on the Windows Desktop.Dassault Systèmes18Q-Checker for V5 Release 5.7
Installation GuideInstalling on UNIX88.1Installing on UNIXOverviewInstallation on UNIX comprises the following steps:1. Unpack the installation package.2. Integrate Q-Checker into a CATIA environment. You can either create a new CATIAenvironment or modify an existing CATIA environment.8.2Unpacking the installation package1 Q-Checker installation packages are specific to CATIA releases. Choose the correctQ-Checker installation package for the installed version of CATIA.2 If the installation package file has the extension .tgz, change the extension to .tar.gz:mv *.tgz *.tar.gzIf the installation package file has the extension .taz, change the extension to .tar.Z.mv *.taz *.tar.Z3 Move the installation package to the desired location:Examplecp QCheckerV5 5xx.tar.gz /catdat/qchecker4 Change to the installation directory:Examplecd /catdat/qchecker5 Unpack the archive. Unpack a .tar.gz archive:gzip -d -c qcheckerV5Rxx yyy.tar.gz tar -xvf - Unpack a .tar.Z archive:Dassault Systèmes19Q-Checker for V5 Release 5.7
Installation GuideInstalling on UNIXuncompress -d -c qcheckerV5Rxx yyy.tar.Z tar -xvf -When unpacked, all files are located in a directory named qcheckerV5Rxx yyy. 8.3NOTE: Unpack UNIX installation packages on UNIX. When unpacking these files elsewhere, installation files might become unreadable.Creating a new CATIA environment1 The QCheckerSetEnv.sh shell script helps you to create a new CATIA environment.Before you run this script, adapt the paths and variables defined in the script asrequired.To add environment variables to the new CATIA environment, use the following scriptcommand:chcatenv -e QCHECKER ENV -d QCHECKER ENV PATH -var varname value -newWhere varname is the name and value is the value of the environment variable.Excerpt from the QCheckerSetEnv.sh script## Name of the new environmentQCHECKER ENV "QCHECKER V5R21 yyy"## Store the new environment in this directoryQCHECKER ENV PATH "/CATIAV5R21/CATEnv"## Installation directory of Q-CheckerQCHECKER INSTALLATION "/catdat/qcheckerV5R21 yyy"## CATIA installation directoryCATIA INSTALLATION "/CatiaV5/R21"## This value is important for AIX. The value can be aix a or aix a64AIX OSDS "aix a". NOTE: When using several versions of Q-Checker in parallel, use separate user andreport directories for each Q-Checker installation. This avoids Q-Checker user settingsto be overwritten.2 Change to the directory of the QCheckerSetEnv.sh script.Dassault Systèmes20Q-Checker for V5 Release 5.7
Installing on UNIXInstallation Guide3 Run the script using the following syntax:./QCheckerSetEnv.sh -new {YES NO} -desktop {YES NO} -a {GLOBAL USER}OptionDescription-newYES:NO:-desktopDo not replace an existing environment with the same name.YES:NO:Replace an existing environment with the same name.Create a desktop icon to run Q-Checker with CATIADo not create a desktop iconThe desktop icon will be displayed after the next login.-aGLOBAL:USER:8.4Create a global environment (recommended)Create a user environmentExtending an existing CATIA environment1 The QCheckerEnv.sh and QCheckerEnv.csh scripts help you to create a newenvironment. Before you run this script, adapt the paths and variables defined in thescript as required.To add environment variables to the new CATIA environment, use the following scriptcommand:varname value\export varnameWhere varname is the name and value is the value of the environment variable. NOTE: When using several versions of Q-Checker in parallel, use separate user andreport directories for each Q-Checker installation. This avoids Q-Checker user settingsto be overwritten.2 Change to the directory of the QCheckerEnv.sh script.3 Run the script using the following syntax:./QCheckerEnv.sh -new {YES NO} -desktop {YES NO} -a {GLOBAL USER}Dassault Systèmes21Q-Checker for V5 Release 5.7
Installation GuideInstalling on UNIXOptionDescription-newYES:NO:-desktopDo not replace an existing environment with the same name.YES:NO:Replace an existing environment with the same name.Create a desktop icon to run Q-Checker with CATIADo not create a desktop iconThe desktop icon will be displayed after the next login.-aGLOBAL:USER:Dassault SystèmesCreate a global environment (recommended)Create a user environment22Q-Checker for V5 Release 5.7
Installation GuideEnvironment Variables9Environment Variables 9.1NOTE: If an optional environment variable is not set, the value marked as “default” isapplied.Q-Checker application path variablesEnvironment variables for installation paths of the Q-Checker application and its componentsVariable nameValueDescriptionTCAQC PATHOne directory pathPath where Q-Checker is installed. Required.TCAQC LOADOne directory pathPath to the Q-Checker load module. Required.TCAQC ADMINOne or more directory paths separated bysemicolon.Path where Q-Checker admin environments are stored.Required.TCAQC USEROne directory pathPath where Q-Checker user settings and user-defined checkenvironments are stored, for example in the home directory ofthe respective user. Required.TCAQC RESOURCESOne or more directory paths separated bysemicolon.Path where Q-Checker resource files are stored. Required.TCAQC DOCOne directory pathPath to the Q-Checker manuals. Required.TCAQC HTMLOne or more directory paths separated bysemicolon.Path to the Q-Checker HTML online help.TCAQC REPORTOne directory pathPath where Q-Checker check reports are stored. Required.Dassault SystèmesWhen more than one path is specified, the names of environments and other subdirectories must be unique across allspecified paths.Resource files includes translation files for the environmenteditor GUI and report templates.If more than one path is specified, Q-Checker will use the firstpath or file where the required information is available. Allsubsequent paths and files are ignored.23Q-Checker for V5 Release 5.7
Installation GuideEnvironment Variables9.2Q-Checker application settingsEnvironment variables for Q-Checker application settingsVariable nameValueDescriptionTCAQC LANG CATYES, NOThis setting controls the dependency of the Q-Checkerlanguage setting from the CATIA session language.YES:Use the CATIA session language (only English, German orFrench). For other CATIA session languages, Q-Checker usesEnglish.NO:Users can select the Q-Checker language setting in theQ-Checker user settings.TCAQC SHOW TOOLSOne or more of thefollowingkeywords, separated by comma:PLUGINSTOQCENV,SPECTREETOXMLTCAQC HIDE TOOLSShow buttons on the Q-Checker toolbars that are hidden bydefault. Specify the keywords for the buttons to be shown,separated by comma.PLUGINSTOQCENV:“Install current plugin set to a Q-Checkerenvironment” buttonSPECTREETOXML:“Convert spec tree to XML” buttonOne or more of thefollowingkeywords, separated by e buttons on the Q-Checker toolbars that are shown bydefault. Specify the keywords for the buttons to be hidden,separated by DeleteQCElements:ratorInternalReport:“Display browser for internal check reports”buttonAnalysisViewer:“Start analysis viewer” button“Start check seal viewer” button“Delete all permanent marking elements”buttonModelTypeConfigurator:“Start model-type configurator”buttonExample To hide the “Start analysis viewer” button and the“Start model-type configurator” button, define the variable likethis:TCAQC HIDE TOOLS AnalysisViewer,SealViewerDassault Systèmes24Q-Checker for V5 Release 5.7
Installation GuideEnvironment VariablesEnvironment variables for Q-Checker application settings(continued)Variable nameValueDescriptionTCAQC CALLYES, NOYES:BROWSER FORBATCH OUTPUTAfter a batch check, open the batch check survey in HTMLformat in a browser.(default): After a batch check, open the batch check surveyin plain text format.NOThis setting only applies to checks in batch mode with theQ-Checker user interface. For batch checks started at thecommand line, see Overview Manual, Running a batch checkat the command line.TCAQC REPORTSYES, NO, SPECTREEIN SPECTREEONLYYES:The internal check report is available in the CATIAspecification tree (for certain document types only) and inthe “Internal checks reports” dialog.(default): The internal check report is not available in theCATIA specification tree, only in the “Internal check reports”dialog.NOSPECTREE ONLY:The internal check report is only available inthe CATIA specification tree. If the document type does notallow to display the check report in the specification tree, thecheck protocol is displayed in the “Internal check reports”dialog.IntegerSet this variable to display an alert when the Q-Checker licensewill expire soon. The value specifies the number of days beforeexpiry when the alert will be displayed. To disable the alert, setthe value to 0.TCAQC CATSTARTOFFFor AIX only: Run CATDUA utilities without the CATSTARTcommand. This is required when using extended memorysupport for CATIA on AIX.TCAQC USEYES, NOYES:TCAQC LICEXPIRY ALERTDISPLAY NAMESetting for connection to VPM V4. Display the CATIAmodel name instead of the internal name from VPM V4.(default): Setting for connection to Smarteam. Display theCATIA model name instead of the internal name fromSmarteam. For connections to VPM 4, the internal namefrom VPM V4 is displayed.NODassault Systèmes25Q-Checker for V5 Release 5.7
Installation GuideEnvironment VariablesEnvironment variables for Q-Checker application settings(continued)Variable nameValueDescriptionTCTRACEPath and filenameSet this variable to activate the Q-Checker trace mode. Thevalue specifies path and filename of the trace file.When TCTRACE is set, significant processing steps executedduring Q-Checker checks are written to the trace file. The tracefile can help to identify problems occurring while a Q-Checkercheck is performed.TCAQC SEAL VALOne or more of thefollowingkeywords, separated by comma:This variable controls in which modes of operation an internalcheck seal is validated, and which action is performed if amodel contains no check seal or an invalid check seal. Set nomore than one value for each mode of operation.Validation when starting an interactive check INTERACTIVE RECHECK: If no valid check seal exists, themodel is checked again. INTERACTIVE INTERRUPT: If no valid check seal exists, thevalidation result is displayed. None of these values: No validation in this mode ofoperation.Validation when starting a batch check with the Q-Checkeruser interface: INTERACTIVE BATCH RECHECK: If no valid check seal exists,the model is checked again. INTERACTIVE BATCH INTERRUPT: If no valid check seal exists,the validation result is displayed. None of these values: No validation in this mode ofoperation.Validation when starting a batch check at the command line: COMMAND LINE BATCH RECHECK: If no valid check seal exists,the model is checked again. COMMAND LINE BATCH INTERRUPT: If no valid check sealexists, the validation result is displayed. None of these values: No validation in this mode ofoperation.Dassault Systèmes26Q-Checker for V5 Release 5.7
Installation GuideEnvironment VariablesEnvironment variables for Q-Checker application settings(continued)Variable nameValueDescriptionTCAQC MODELTYPEYES, NOQ-Checker saves the checked model depending on the “Savecurrent model” setting in the model type manager. Users areprompted to confirm saving the model. This variable cansuppress the confirmation.SAVE ACTIVATESUPPRESS DIALOGYES:NOSave the model without confirmation.(default): Prompt the user for confirmation.If the “Save current model” setting is selected in the profileoptions, users are also prompted to confirm saving the model.This prompt cannot be suppressed using this variable. Setting in the model type manager for saving the checkedmodel: Administration manual, “Save checked model” checkbox Setting in the profile options for saving the checked model:Administration manual, “Save model after the check run”check box User setting for suppressing the message: OverviewManual, “'Save model' message when starting a check” check boxTCAQC BATCHMASTE
Dassault Systèmes 7 Q-Checker for V5 Release 5.7 Installation Guide 3 System Requirements NOTE: Q-Checker is supported only on systems certified for the corresponding CATIA release. For detailed software requirements, refer to the CATIA Program Directory that is
This chapter describes how to install and launch D-checker. Double-click D-checker.exe, which can be found in the unzipped folder, to launch D-checker. Unzip the D-checker package into a folder of your choice (for example, on the desktop). When you launch D-checker for the first time, a firewall settings dialog box will be displayed.
Shows which Checker is connected, the Job name and if it has been saved, along with results for the most recent image. 2 Checker steps. Click each button in turn to build a Checker application. 3 Image display. Shows live video from Checker or individual images from a Filmstrip. 4 For each Checker step, instructions about what to do next are .
Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original
rabbi lawrence charney * sally dickman chase harry chasen * sylvia chasen * jean chason * julius george chason * beatrice checker bill checker boris checker * kathy checker * kathy checker harriet chensky * maurice cherney * mollie cherney * muriel cherney henry chess . philip dolin sol dolin
10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan
service i Norge och Finland drivs inom ramen för ett enskilt företag (NRK. 1 och Yleisradio), fin ns det i Sverige tre: Ett för tv (Sveriges Television , SVT ), ett för radio (Sveriges Radio , SR ) och ett för utbildnings program (Sveriges Utbildningsradio, UR, vilket till följd av sin begränsade storlek inte återfinns bland de 25 största
Hotell För hotell anges de tre klasserna A/B, C och D. Det betyder att den "normala" standarden C är acceptabel men att motiven för en högre standard är starka. Ljudklass C motsvarar de tidigare normkraven för hotell, ljudklass A/B motsvarar kraven för moderna hotell med hög standard och ljudklass D kan användas vid
LÄS NOGGRANT FÖLJANDE VILLKOR FÖR APPLE DEVELOPER PROGRAM LICENCE . Apple Developer Program License Agreement Syfte Du vill använda Apple-mjukvara (enligt definitionen nedan) för att utveckla en eller flera Applikationer (enligt definitionen nedan) för Apple-märkta produkter. . Applikationer som utvecklas för iOS-produkter, Apple .
