SwitchbladeTM Modular Pack System Setup & Features
SwitchbladeTM ModularPack System Setup & FeaturesOperator’s ManualOTHER PATENTS PENDING
CONTENTSSwitchbladeTM ModularPack System & FeaturesCONTENTS1 System Overview2 Component Assembly3 Storage & Hydration5 Hydrosleeve6 Weapon Retention Straps7 M240 2-Man Team Pack System9 M240 3-Man Team Pack System12 81mm Mortar 4-Man Team Pack System16 60mm Mortar 3-Man Team Pack System19 Gustaf 2-Man Team Pack System21 Sniper Pack System22 Product Information & Maintenance
INTRODUCTIONSystem overviewStackable ComponentsPatent # US 8,678,258 B1Other Patents Pending
Component AssemblyMOLLE PANEL FRAME
PACK FEATURESSTORAGEThe Raid and Assault Packs are almost identical in their layout with the only real difference being the payloadsize. The Assault also features a detachable top lid for convenience. Visit www.catoma.com for specific productdimensions and payload ratings.»»»»»»»»»»3FRONT ACCESS STORAGE Primary access point for both packs. Quickly accessible by dual zippered panel.TOP STORAGE POCKET with interior & exterior zippers for quick access to smaller items.DUAL SIDE POCKET STORAGE sized to fit 3L hydration bladders. These side pockets feature both top andbottom openings for running hydration hoses.MOLLE PANELS on front sides, top, bottom, and internally.COMPRESSION STRAPS located internally and externally to keep your gear in place. To secure pack to akitted frame, unclip patent-pending UniBucklesTM and secure to molle panel using six side buckles.Designing with the mission in mind
HYDRATION ConfigurationsBoth the Raid and Assault feature hydration setups that can be routed from the side storage or main bay to theshoulder straps enabling the wearer to access water comfortably without removal. There are four routes forrunning the drinking line valve: two at the top of the pack body; two on the bottom of the pack. See illustrationbelow for details.DUAL TOP PORTSDUAL BOTTOM PORTS1.800.826.0446 www.catoma.com4
ATTACHMENTSHydrosleeveThis lightweight, well-thought-out pouch holds up to a 3L hydration bladder and can be attached via MOLLEeither vertically or horizontally. On the heavy weapons systems, we recommend mounting it horizontally at thebase of the Molle Panel.DUAL CINCH CORD OPENINGSCOMPRESSION STRAPSSNAP-ON LOOPS FOR CONNECTING TO MOLLE PANEL(3) Snap-on LoopsConnect Snap-on loops at thebase of the Molle Panel(2) “G HOOKS” for compression5Designing with the mission in mindLoop G-Hook around the hydrosleeveand secure to webbing at the base ofthe molle panel
WR (Weapon Retention) StrapsWeapon Retention Straps can be used with any molle panel on Switchblade gear. We suggest securing the strapsto molle panel near the frameset and securing the pack over it.HOW TO SECURE STRAPS See the illustrationbelow for reference. With the opposite end of theloop, run the strap through the nylon loop and backin the same direction to secure the strap for travel.Multiple Weapon MountingConfigurationsRIFLE SECURED BY WR STRAPS1.800.826.0446 www.catoma.com6
m240 2-man team pack systemCOYOTE: 98720-CMULTICAM: 98720-MCM240 Gunner Pack KITASSAULT PACK BODY7Designing with the mission in mindFRAMESET connects to the pack body byconnecting the 6 buckle points. See theFrameset Setup & Adjustments User Guidefor detail instructions on setup.
M240 Assistant Gunner PACK KIt(2) 300 ROUND 240 POUCH: Secure theammo pouches to the molle panel by usingthe molle rails. Be sure to install them withthe pouch opening up top facing away fromthe wearer for ease of access.MOLLE PANELFRAMESET: Connect theframeset to the molle paneljust like a pack bodyBARREL QUIVER: Secure thebarrel quiver to the molle panel bysecuring it with the 6 (3 per side)snap-on buckles before adding thepack body on top.HYDROSLEEVE: Securehydrosleeve to the bottom ofthe molle panel. For detailedinstructions see page 8.RAID PACK BODY: Use the front compressionunibucklesTM on the pack to connect the packbody to the molDUAL BOTTOM PORTS1.800.826.0446 www.catoma.com4
ATTACHMENTSHydrosleeveThis lightweight, well-thought-out pouch holds up to a 3L hydration bladder and can be attached via MOLLEeither vertically or horizontally. On the heavy weapons systems, we recommend mounting it horizontally at thebase of the Molle Panel.DUAL CINCH CORD OPENINGSCOMPRESSION STRAPSSNAP-ON LOOPS FOR CONNECTING TO MOLLE PANEL(3) Snap-on LoopsConnect Snap-on loops at thebase of the Molle Panel(2) “G HOOKS” for compression5Designing with the mission in mindLoop G-Hook around the hydrosleeveand secure to webbing at the base ofthe molle panel
WR (Weapon Retention) StrapsWeapon Retention Straps can be used with any molle panel on Switchblade gear. We suggest securing the strapsto molle panel near the frameset and securing the pack over it.HOW TO SECURE STRAPS See the illustrationbelow for reference. With the opposite end of theloop, run the strap through the nylon loop and backin the same direction to secure the strap for travel.Multiple Weapon MountingConfigurationsRIFLE SECURED BY WR STRAPS1.800.826.0446 www.catoma.com6
m240 2-man team pack systemCOYOTE: 98720-CMULTICAM: 98720-MCM240 Gunner Pack KITASSAULT PACK BODY7Designing with the mission in mindFRAMESET connects to the pack body byconnecting the 6 buckle points. See theFrameset Setup & Adjustments User Guidefor detail instructions on setup.
M240 Assistant Gunner PACK KIt(2) 300 ROUND 240 POUCH: Secure theammo pouches to the molle panel by usingthe molle rails. Be sure to install them withthe pouch opening up top facing away fromthe wearer for ease of access.MOLLE PANELFRAMESET: Connect theframeset to the molle paneljust like a pack bodyBARREL QUIVER: Secure thebarrel quiver to the molle panel bysecuring it with the 6 (3 per side)snap-on buckles before adding thepack body on top.HYDROSLEEVE: Securehydrosleeve to the bottom ofthe molle panel. For detailedinstructions see page 8.RAID PACK BODY: Use the front compressionunibucklesTM on the pack to connect the packbody to the molle panel.Fully Assembled Packwith Components1.800.826.0446 www.catoma.com8
m240 3-man team pack systemCOYOTE: 98725-CMULTICAM: 98725-MCM240 Gunner PackASSAULT PACK BODY9Designing with the mission in mindFRAMESET connects to the pack body byconnecting the 6 buckle points. See theFrameset Setup & Adjustments User Guidefor detail instructions on setup.
M240 Assistant Gunner PACK KIt(2) 300 ROUND 240 POUCH: Secure theammo pouches to the molle panel by usingthe molle rails. Be sure to install them withthe pouch opening up top facing away fromthe wearer for ease of access.MOLLE PANELFRAMESET: Connect theframeset to the molle paneljust like a pack bodyBARREL QUIVER: Secure thebarrel quiver to the molle panelframe by securing it with the 6 (3per side) snap-on buckles beforeadding the pack body on top.HYDROSLEEVE: Securehydrosleeve to the bottom ofthe molle panel. For detailedinstructions see page 8.RAID PACK BODY: Use the front compressionunibucklesTM on the pack to connect the packbody to the molle panel.Fully Assembled Packwith Components1.800.826.0446 www.catoma.com10
M240 Ammo bearer PACK KIt(2) 300 ROUND 240 POUCH: Secure theammo pouches to the molle panel by usingthe molle rails. Be sure to install them withthe pouch opening up top facing away fromthe wearer for ease of access.MOLLE PANELFRAMESET: Connect theframeset to the molle paneljust like a pack bodyHYDROSLEEVE: Securehydrosleeve to the bottom ofthe molle panel. For detailedinstructions see page 8.RAID PACK BODY: Use the front compressionunibucklesTM on the pack to connect the packbody to the molle panel.11Designing with the mission in mindFully Assembled Packwith Components
81MM Mortar 4-Man Team pack systemCOYOTE: 98751-CMULTICAM: 98751-MCMortar Gunner PackWR STRAPS: Secure cannonby using the WR Straps. Seepage 9 for detailed informationon the WR Straps.MOLLE PANELFRAMESET: Connectthe frameset to the mollepanel just like a packbodyHYDROSLEEVE(2) MAG MUNITIONS POUCHES (SMALL): Secure the munitionspouches to the molle panel by using the molle panel webbing. Werecommend offsetting the pouches to enhance weight distribution andbalance when wearing. Once configured secure the molle panel to thepack body by connecting the buckles of the molle panel with the raidpack body.RAID PACK BODY: Use the front compression unibucklesTM onthe pack to connect the pack body to the molle panel.Fully Assembled Pack withComponents1.800.826.0446 www.catoma.com12
Mortar Assistant Gunner Pack KITWR STRAPS: Secure cannonby using the WR Straps. Seepage 9 for detailed informationon the WR Straps.MOLLE PANELFRAMESET: Connectthe frameset to the mollepanel just like a packbodyADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.HYDROSLEEVE(2) MAG MUNITIONS POUCHES (SMALL): Secure the munitionspouches to the molle panel by using the molle panel webbing. Werecommend for this configuartion, that the pouches be centered andlevel. Once configured secure the molle panel to the pack body byconnecting the buckles of the molle panel with the raid pack body.RAID PACK BODY: Use the front compression unibucklesTMon the pack to connect the pack body to the molle panel.13Designing with the mission in mindFully Assembled Packwith Components
Mortar AMMO BEARER PACK KIT X2(2) MAG MUNITIONS POUCHES (LARGE):Secure the munitions pouches molle panel.If possible, stack the pouches so that mostof the weight is at the top, this will make thepack more stable when worn.MOLLE PANELADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.FRAMESET: Connect theframeset to the molle paneljust like a pack bodyHYDROSLEEVEX-FLAP: Secure the X-Flap to the pack body by using thehardware on the X-Flap. There are four strap points located oneach of the four corners of the front of the pack body.RAID PACK BODY: Use the front compression unibucklesTM onthe pack to connect the pack body to the molle panel.Fully Assembled Packwith Components1.800.826.0446 www.catoma.com14
Mortar AMMO BEARER PACK KIT X2(2) MAG MUNITIONS POUCHES (LARGE):Secure the munitions pouches molle panel.If possible, stack the pouches so that mostof the weight is at the top, this will make thepack more stable when worn.ADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.MOLLE PANELFRAMESET: Connect theframeset to the molle paneljust like a pack bodyHYDROSLEEVEX-FLAP: Secure the X-Flap to the pack body by using thehardware on the X-Flap. There are four strap points located oneach of the four corners of the front of the pack body.RAID PACK BODY: Use the front compression unibucklesTM onthe pack to connect the pack body to the molle panel.15Designing with the mission in mindFully Assembled Packwith Components
60MM Mortar 3-Man Team pack systemCOYOTE: 98750-CMULTICAM: 98750-MCMortar Gunner PackWR STRAPS: Secure cannonby using the WR Straps. Seepage 9 for detailed informationon the WR Straps.MOLLE PANELFRAMESET: Connectthe frameset to themolle panel just like apack bodyADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.HYDROSLEEVE(2) MAG MUNITIONS POUCHES (SMALL): Secure the munitionspouches to the molle panel by using the molle panel webbing. Werecommend offsetting the pouches to enhance weight distribution andbalance when wearing. Once configured secure the molle panel to thepack body by connecting the buckles of the molle panel with the raidpack body.RAID PACK BODY: Use the front compression unibucklesTM onthe pack to connect the pack body to the molle panel.Fully Assembled Packwith Components1.800.826.0446 www.catoma.com16
Mortar Assistant Gunner Pack KITWR STRAPS: Secure cannonby using the WR Straps. Seepage 9 for detailed informationon the WR Straps.MOLLE PANELFRAMESET: Connectthe frameset to the mollepanel just like a packbodyADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.HYDROSLEEVE(2) MAG MUNITIONS POUCHES (SMALL): Secure the munitionspouches to the molle panel by using the molle panel webbing. Werecommend for this configuartion, that the pouches be centered andlevel. Once configured secure the molle panel to the pack body byconnecting the buckles of the molle panel with the raid pack body.RAID PACK BODY: Use the front compression unibucklesTMon the pack to connect the pack body to the molle panel.17Designing with the mission in mindFully Assembled Packwith Components
Mortar AMMO BEARER PACK KIT(2) MAG MUNITIONS POUCHES (LARGE):Secure the munitions pouches molle panel.If possible, stack the pouches so that mostof the weight is at the top, this will make thepack more stable when worn.MOLLE PANELADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.FRAMESET: Connect theframeset to the molle paneljust like a pack bodyHYDROSLEEVEX-FLAP: Secure the X-Flap to the pack body by using thehardware on the X-Flap. There are four strap points located oneach of the four corners of the front of the pack body.RAID PACK BODY: Use the front compression unibucklesTM onthe pack to connect the pack body to the molle panel.Fully Assembled Packwith Components1.800.826.0446 www.catoma.com18
GUSTAF 2-Man Team Pack SystemCOYOTE: 98760-CMULTICAM: 98760-MCGustaf Gunner PackWEAPON RETENTION STRAPS: Secureweapon by using the WR Straps. See page 9for detailed information on the WR Straps.MOLLE PANELFRAMESET: Connectthe frameset to the mollepanel just like a packbodyHYDROSLEEVERAID PACK BODY: Use the front compressionunibucklesTM on the pack to connect the packbody to the molle panel.19Designing with the mission in mindFully Assembled Packwith Components
Gustaf Assistant Gunner PACK KIT(2) MAG MUNITIONS POUCHES (LARGE):Secure the munitions pouches molle panel.If possible, stack the pouches so that mostof the weight is at the top, this will make thepack more stable when worn.MOLLE PANELADJUSTABLEPLACEMENT:Pouches can berelocated to betteraccommodatevarious ammolengths.FRAMESET: Connect theframeset to the molle paneljust like a pack bodyHYDROSLEEVEX-FLAP: Secure the X-Flap to the pack body by using thehardware on the X-Flap. There are four strap points located oneach of the four corners of the front of the pack body.RAID PACK BODY: Use the front compression unibucklesTM onthe pack to connect the pack body to the molle panel.Fully Assembled Packwith Components1.800.826.0446 www.catoma.com20
Sniper Pack SystemCOYOTE: 98706-CMULTICAM: 98706-MCSniper Weapon PackNOTE: The Sniper Weapon Pack has various layouts. Below the rifle is show carried diagonally however, itcan also be carried vertically if preferred for reduced hight and sway. The Hydrosleeve can also be attachedhorizontally or vertically. The pack body is secured to the molle panel frame by using the front compressionstraps.WEAPON RETENTION STRAPS: Securerifle by using the WR Straps. See page 9for detailed information on the WR Straps.MOLLE PANELFRAMESET: Connectthe frameset to the mollepanel just like a packbodyHYDROSLEEVERAID PACK BODY: Use the front compressionunibucklesTM on the pack to connect the packbody to the molle panel.21Designing with the mission in mindFully Assembled Packwith Components
Replacement partsIndividual Part 64509-HP-MC98675N/A98669-C98669-MCMolle Panel9865098651Assault Pack Body9865798658Raid Pack unition Pouch - Small98645-C98645-MCMunition Pouch - Large98646-C98646-MC9866598666Weapon Retention StrapsFramesetBarrel Quiver300 RD M240 PouchX-FlapKITS (Fuly Assembled)KITSCOYOTEMULTICAMM240 Gunner Pack Kit98721-C98721-MCM240 Assistant Gunner Pack Kit98722-C98722-MCM240 Ammo Bearer Pack Kit98727-C98727-MCMortar Gunner Pack Kit98752-C98752-MCMortar Assistant Gunner Pack Kit98753-C98753-MCMortar Ammo Bearer Pack Kit98754-C98754-MCGustaf Gunner Pack Kit98761-C98761-MCGustaf Assistant Gunner Pack Kit98762-C98762-MCSniper Weapon Pack Kit98706-C98706-MCMaintenanceThe pack bag and framesheet do not require special maintenance. Try to keep the framesheet free of oils which maycause squeaking. DO NOT APPLY ARMORALL or any other oil-based solution to the framesheet. KEEP away fromopen flames. The pack’s nylon fabric can get singed or melted. If something breaks and you need a replacementpart contact us by phone at 800.826.0446 or online at www.catoma.com.FEEDBACKIf you enjoy using our gear and would like to buy it for yourself visit www.catoma.com and be sure to takeadvantage of our military / law enforcement discount.1.800.826.0446 www.catoma.com22
NOTES23Designing with the mission in mind
PROUDLY DESIGNED AND MADE IN THE U.S.A.
MOLLE (Modular Lightweight Load-Carrying Equipment) makes this possible. This system was designed based on soldier feedback. MOLLE is a modular Load-Carrying system designed to enhance the survivability and lethality of the modern warfighter. MOLLE is a replacement for the All-Purpose Lightweight Individual Carrying Equipment system (ALICE).
Modular: 18" x 36" (45.7 cm x 91.4 cm) Stratatec Patterned Loop Dynex SD Nylon 100% Solution Dyed 0.187" (4.7mm) N/A ER3 Modular, Flex-Aire Cushion Modular, Conserv Modular, ethos Modular 24" x 24": 18" x 36": Coordinate Group: Size: Surface Texture: Yarn Content: Dye Method: Pile Height Average: Pattern Match: Modular
paws. Family, friends, neighbors, co-workers, and anyone who believes in the humane treatment of animals can be a part of YOUR PACK! Determine a Pack Leader & Pack Name: The Pack Leader will be responsible for coordinating all Pack paperwork, keeping the Pack informed, motivating the Pack to FUNdraise, and ensuring the minimum 1,000 is collected.
modular cnc router plans 2009v1 copyright modular cnc @2009 for personal use only item no. part number description vendor material cost qty. 1 mc-z-001 drive end plate modular cnc hdpe 10.00 1 2 mc-z-002 end plate modular cnc hdpe 8.00 1 3 mc-z-003 top plate modular cnc hdpe 12.50 1 4 mc-z-005 linear rod speedy metals 1018 crs 3.00 2
Lake MI Nintendo Switch Prize Pack . Liam S Richford NY Nintendo Switch Prize Pack . Mary E Moultrie GA Nintendo Switch Prize Pack Victor V Kyle TX Nintendo Switch Prize Pack Nickolas B Taylorsville MS Nintendo Switch Prize Pack sandra h Williamsburg VA Nintendo Switch Prize Pack Natalia G Cordova TN Nintendo Switch Prize Pack .
BACK to return SUBWOOFER SETUP SW limiter.: dB Increase limiter level using VOL buttons. Press ENTER just before the subwoofer is clipping. press BACK to cancel. MAIN MENU Digital audio.: menu Input setup.: menu System setup.: menu Speaker Setup.: menu Delay Setup.: menu Balance Setup.: menu Subwoofer Setup: menu ENTER to enter menu
ESP-LX Modular Controller The ESP-LX Modular controller is an irrigation timing system designed for commercial and residential use. The controller’s modular design can accommodate from 8 to 32 valves. The ESP-LX Modular controller is available in an indoor-only vers
Throttle and Check Valve, Modular Check Valve, Modular Pilot Check Valve, Modular Solenoid Check Valve, Multi-station manifold Blocks, modular sub-plates. HYDRAULIC VALVES Full catalogue containing all the technical information is available on request PRODUCTS Directional control valves Modular valves 6 Directional Control Valves: CETOP
TCIA (ASC A300) (Tree Care Industry Association) Revision BSR A300 Part 2-201x, Tree, Shrub, and Other Woody Plant Management - Standard Practices (Soil Management a. Assessment, b. Modification, c. Fertilization, and d. Drainage) (revision of ANSI A300 Part 2-2011) A300 (Part 2) Soil Management standards are performance standards for
