Product Bulletin ES Valve October 2020 Fisher ES And EAS .
Product BulletinES Valve51.1:ESOctober 2020D100021X012Fisher ES and EAS Sliding-StemControl ValvesFisher ES and EAS general-purpose control valves(figures 1 and 2) are used for throttling or on-offcontrol of a wide variety of liquids and gases. Bothvalve designs have single ports, unbalanced valveplugs, and cage guiding.In both designs, metal-to-metal seating is standard forall general applications over a wide range of pressuredrops and temperatures. Metal-to-PTFE seating isoptional for more stringent shutoff requirements.The Fisher ES product line is available for a wide rangeof applications, including sulfide and chloridestress-cracking environments common to the oil andgas production industries. To discuss availableconstructions, contact your Emerson sales office andinclude the applicable codes and standards requiredfor these environments.The easy-e Valve FamilyW2174-3ES and EAS valves are part of the versatile easy-e familyof Fisher industrial control valves. easy-e valves sharethe following characteristics.FISHER ES CONTROL VALVEWITH 657 ACTUATORnnMultiple trim material choicesnTrim temperature capability with standard metalseats to 427 C (800 F)nFlexible graphite gasketsnnInterchangeable, restricted-capacity trims andfull-flow trims to match variable process flowdemandsTrim part interchangeability that permitsreconfiguring the valve to a different designvariationwww.Fisher.comDifferent cage/plug styles provide particular flowcharacteristics for highly-specialized applications.The standard cage comes in three different flowcharacteristics: n quick-opening n linear n equal percentagenWhisper Trimt I cages (figure 1) that attenuateaerodynamic noise in gaseous service are availablefor all sizes except the NPS 8 ES valve.nOptional constructions provide materialcompatibility with NACE MR0175-2002.n316 stainless steel packing box parts are standard(including packing flange, studs, and nuts).
Product BulletinES Valve51.1:ESOctober 2020FeaturesnnCompliance with the Clean Air Act— OptionalENVIRO-SEAL packing systems (figure 3) providean improved stem seal to help prevent the loss ofprocess fluid. The ENVIRO-SEAL packing systemsfeature PTFE, Graphite ULF, or Duplex packing withlive-loading for reduced packing maintenance.Valve Plug Stability— Rugged cage guiding providesincreased valve plug stability, which reducesvibration and mechanical noise.nEconomy— Streamlined flow passages providehigher efficiency and greater capacities per initialinvestment.nCost-Effective Operation— Increased wearresistance of the standard hardened stainless steeltrim means long-lasting service. Also, trim inventorycosts are cut because dimensional standardizationpermits use of most standard easy-e trim parts.D100021X012nEasy Maintenance— The valve can stay in thepipeline during removal of trim parts for inspectionor maintenance.nLong-Lasting Shutoff Capability with PTFE Seating—Controlled compression of optional seatconstruction protects PTFE disk between metal diskseat and disk retainer (figure 1). The flowstreamcontacts only the edge of the disk during normaloperation.nCompliance with European Standards— Valves areavailable with dimensions specified by EN/DINstandards. See figure 7 and the note in figure 8.nSour Service Capability— Unless otherwise noted,references are to NACE MR0175-2002. Optionalmaterials are available to meet NACE MR0103 andNACE MR0175 / ISO15156. Material requirementsunder these standards vary by edition and year ofissue; the specific standard must be specified.Table of ContentsFeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3ENVIRO-SEAL Packing SystemSpecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4ENVIRO-SEAL and HIGH-SEALPacking Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Class VI Shutoff Capabilities . . . . . . . . . . . . . . . . . . . . 5TablesClass VI Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Available Constructions . . . . . . . . . . . . . . . . . . . . . . . . 6Typical Combinations ofMetal Trim Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Whisper Trim III Materials and Capabilities . . . . . . . . 8Valve Body/Trim TemperatureCapabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Bonnet Selection Guidelines . . . . . . . . . . . . . . . . . . .Maximum Flow Coefficients . . . . . . . . . . . . . . . . . . .Materials and Temperature Limits forAll Other Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . .Metal Trim Part Materials forCompatibility with NACE MR0175-2002(Sour Service) Specifications,Environmental Restrictions Apply,Refer to Standard . . . . . . . . . . . . . . . . . . . . . . . . . .Bolting Materials and Temperature Limitsfor Bolting Compliance withNACE MR0175-2002 . . . . . . . . . . . . . . . . . . . . . . .Port Diameters, Valve Plug Travel, andStem and Yoke Boss Diameters . . . . . . . . . . . . . .Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11131415171720
Product BulletinES Valve51.1:ESOctober 2020D100021X012SpecificationsAvailable ConfigurationsConstruction MaterialsBody, Bonnet, and Bonnet Spacer or Bottom Flange, ifused: J WCC carbon steel,J CF8M stainless steel,J LCC carbon steel, J WC9 chrome moly steel,J Cast iron body with steel bonnet construction,J CF3M stainless steel, orJ Other material constructions upon requestValve Plug, Cage, and Metal Seating Parts: See table 4All Other Parts: See table 9ES: Single-port, globe-style control valve with cageguiding, unbalanced valve plug, andpush-down-to-close valve plug action (figure 1)EAS: Angle version of ES control valve, used tofacilitate piping or in applications where aself-draining valve is desired (figure 2)Valve SizesSee table 3Material Temperature Capabilities(2)Body/Trim Combinations: See tables 4 and 6Those For NACE Specification: See tables 10 and 11Whisper III Trims: See table 5All Other Parts: See table 9End Connection Styles(1)(2)Cast Iron ValvesFlanged: ES, NPS 1 through 8, including NPS 1-1/2 and2-1/2 (except NPS 1-1/4), J CL125 flat-face orJ CL250 raised-face flanges per ASME B16.1Steel and Stainless Steel ValvesFlanged: J CL150, 300, or 600 raised-face (RF) orring-type joint (RTJ) flanges per ASME B16.5,J Raised-face (RF) flanges per EN1092-1/BScrewed or Socket Welding: NPS 1/2 through 2,consistent with ASME B16.11Buttwelding: NPS 1 through 8 (except NPS 1-1/4).Schedules 40 or 80 consistent withASME B16.25Flow CharacteristicsStandard Cages: J Quick-opening, J linear, orJ equal percentageWhisper Trim: LinearFlow DirectionsESStandard Cage: Normally upWhisper Trim Cages: Always upEASStandard Cage: Without liner, flow up or down; withliner, normally downWhisper Trim Cages: Always upMaximum Inlet Pressures and Temperatures(1)(2)As listed below, unless limited by maximum pressuredrop or material temperature capabilitiesCast Iron ValvesFlanged: Consistent with CL125B or 250B per ASMEB16.1Steel and Stainless Steel ValvesFlanged: Consistent with CL150, 300, and 600(3) perASME B16.34Screwed or Welding: Consistent with flanged CL600(3)per ASME B16.34Flow Coefficients and Noise Level PredictionSee table 8 and Catalog 12Port Diameters and Maximum Valve Plug TravelsSee table 12 for trims except Whisper IIISee table 13 for Whisper III trimsYoke Boss and Stem DiametersSee table 12 and 13Maximum Pressure Drop(2)Same as maximum inlet pressure for specificconstruction defined above, except where furtherlimited as shown in figures 5 and 6Valves for NACE MR0175-2002: See figure 5Typical Bonnet StylesJ Plain or J extension. See figures 7 and 8 forstandard dimensions. See table 7 for selectionguidelinesShutoff Classifications per ANSI/FCI 70-2and IEC 60534-4J ENVIRO-SEAL bellows seal bonnet. See figure 4 forview of ENVIRO-SEAL bellows seal bonnet. Also, seeBulletin 59.1:070, ENVIRO-SEAL Bellows Seal Bonnets,(D101641X012) for further informationMetal Seating: Class IV is standard. Class V is optionalPTFE Composition Seating: Class VI- continued -3
Product BulletinES Valve51.1:ESOctober 2020D100021X012Specifications (continued)Packing ArrangementsStandard Material: Single PTFE V-ringENVIRO-SEAL Packing: See figure 3ENVIRO-SEAL Packing Systems in vacuum service:Standard ENVIRO-SEAL packing systems can be usedin vacuum service with packing rings in standardorientation. Do not reverse the ENVIRO-SEAL PTFEpacking rings.Also see Bulletin 59.1:061, ENVIRO-SEAL PackingSystems for Sliding-Stem Valves, (D101633X012) formore information.Approximate WeightsNPS 1/2 and 3/4: 9 kg (20 lb)NPS 1 and 1-1/4: 14 kg (30 lb)NPS 1-1/2: 20 kg (45 lb)NPS 2: 39 kg (85 lb)NPS 2-1/2: 45 kg (100 lb)NPS 3: 57 kg (125 lb)NPS 4: 77 kg (170 lb)NPS 6: 159 kg (350 lb)NPS 8: 408 kg (900 lb)Optional Safety Instrumented System ClassificationSIL3 capable — certified by exida Consulting LLCAdditional OptionsJ Lubricator, J lubricator/isolating valve, J drilledand tapped connection in extension bonnet forleakoff service, J body drain plug, J style 3fabricated extension bonnet made on order to aspecific length for cryogenic service, and J WhisperTrim III cage1. EN (or other) ratings and end connections can usually be supplied; consult your Emerson sales office.2. The pressure/temperature limits in this bulletin, and any applicable standard limitations should not be exceeded.3. Certain bonnet bolting material selections may require a CL600 easy-e valve assembly to be derated. Contact your Emerson sales office for more informationENVIRO-SEAL Packing System SpecificationsApplicable Stem DiametersJ 9.5 mm (3/8 inches), J 12.7 (1/2), J 19.1 (3/4),J 25.4 (1), and J 31.8 (1-1/4) diameter valve stemsMaximum Pressure/Temperature Limits(1)To Meet the EPA Fugitive Emission Standard of 100PPM(2)For ENVIRO-SEAL PTFE and ENVIRO-SEAL Duplex packingsystems: full CL300 up to 232 C (450 F)For ENVIRO-SEAL Graphite packing: 104 bar (1500 psig)at 316 C (600 F)Construction MaterialsPTFE Packing Systems:Packing Ring and Lower Wiper: PTFE V-ring(3)Male and Female Adaptor Rings: Carbon-filled PTFEV-ringGraphite ULF Packing Systems: Graphite ringsDuplex Packing Systems:Male and Female Adaptor Rings: Carbon-filled PTFEV-ringGuide Bushings: Carbon graphitePacking Rings: Graphite compositePacking Washer: PTFEAnti-Extrusion Washer: Filled PTFE (not required forgraphite or duplex packing)Lantern Ring: S31600 (316 stainless steel) (notrequired for graphite packing)Packing Box Flange: S31600Spring: J 17-7PH stainless steel or J N06600Packing Follower: S31600 lined with carbon-filledPTFEPacking Box Studs: Strain-hardened 316 stainlesssteelPacking Box Nuts: 316 stainless steel1. Refer to the valve specifications in this bulletin for pressure/temperature limits of valve parts. Do not exceed the pressure/temperature rating of the valve. Do not exceed any applicable codeor standard limitation.2. The Environmental Protection Agency (EPA) has set a limit of 100 parts per million (ppm) for fugitive emissions from a valve in selected VOC (Volatile Organic Compound) services.3. In vacuum service, it is not necessary to reverse the ENVIRO-SEAL PTFE packing rings.4
Product BulletinES Valve51.1:ESOctober 2020D100021X012Table 1. Class VI Shutoff AvailabilityValvePort Size, InchesSeatMinimum Seat LoadES 7Metal300 lbs/lineal inchTable 2. Class VI Trim MaterialsTRIM TEMPERATURE LIMITVALVECAGE/SEAT RING RETAINERVALVE PLUGSEAT RINGCFESS31600 (316 SST) / ENCS31600/CoCr-A (alloy 6) seatS31600Not a limiting factorNot a limiting factorENVIRO-SEAL, HIGH-SEALPacking SystemsGraphite ULF packing system is offered. TheHIGH-SEAL packing system provides excellent sealingat pressure/temperature ratings beyond ENVIRO-SEALlimits.ENVIRO-SEAL and HIGH-SEAL packing systems offerexcellent sealing capabilities. They easily install in yourexisting valves or can be purchased with new valves.These systems may help prevent the loss of processfluid. The long operational life and reliability of thesesystems also helps to reduce your maintenance costsand downtime.ENVIRO-SEAL packing systems, available with PTFE,Graphite ULF, or Duplex packing, and the HIGH-SEALpacking systems, Graphite ULF and graphitecomposite, feature live-loading and uniquepacking-ring arrangements for long-term, consistentsealing performance.For applications requiring compliance withenvironmental protection regulations, the uniqueFisher ENVIRO-SEAL packing system (figure 3) and aunique ENVIRO-SEAL bellows seal system (figure 4) areoffered. The emission control packing system helps tokeep emission concentrations below the EPA 100 ppmrequirement.For an excellent stem seal in applications that are notenvironmentally-sensitive, the Fisher HIGH-SEALClass VI ShutoffCapabilitiesES valves with metal seat constructions can provideANSI/FCI Class VI shutoff capabilities. See tables 1 and2.5
Product BulletinES Valve51.1:ESOctober 2020D100021X012Table 3. Available Valve Body ConstructionsBODY MATERIAL AND END CONNECTION STYLE(1)VALVESIZE,NPSScrewed1/2 or 3/41, 1-1/2, or 21-1/42-1/2, 3, 4, 6, or 81 or 23, 4, or 6XXX-------VALVEESEASCarbon Steel, Alloy Steel, or Stainless Steel Valve BodyRF or RTJ FlangedCast Iron Valve BodyCL150CL300CL600ButtweldingSocketWeldCL125FF FlangedCL250RF --X--X-------X--X-----X Available Construction.1. End connection style abbreviations: FF - Flat Faced, RF - Raised Face, RTJ - Ring Type Joint.Figure 1. Fisher ES SectionalLOADRINGPTFE V-RING PACKINGW1214-2BONNET GASKETNPS 8 VALVE BODYPTFE DISKCAGESHIMSPIRALWOUND GASKETMETAL DISKRETAINERVALVE PLUGMETAL DISKSEATW2030-1OPTIONAL PTFE SEATINGSEAT RINGGASKETMETALSEAT RINGW3421-3STANDARD NPS 1 THROUGH 6 CONSTRUCTION6W0961-1WHISPER TRIM I CAGE
Product BulletinES Valve51.1:ESOctober 2020D100021X012Table 4. Typical Combinations of Metal Trim Parts(1) for all Valves Except Those for NACE Specificationand Whisper Trim III CagesTrim DesignationValve Plug1 (standard for metal-seatES and EAS in all valve bodymaterials except CF8M)S41600 HT3(5) and 3H(4)4(2)CageSeat Ringfor StandardMetal-SeatConstructionOptional Liner(Metal-SeatEAS ValveBody Only)Disk Seat andRetainer forOptionalPTFE-SeatConstruction17-4 SST HT(6)S41600 HT orCA15 HT(1)(410 stainless steel)S41600 HT---R30006 or R30016(alloy 6)R30006 (alloy 6)------17-4 SST HTS31600S31600S31600316 SSTwith electrolessnickel coating (ENC)R30006 (alloy 6)------17-4 SST HT(6)S31600with seat and guidehard faced withCoCr-A hardfacing alloyS3160027S31600 withseat and guide hard facedwith CoCr-A hardfacing alloy28(3)S31600 withseat hard faced withCoCr-A hardfacing alloy29(3) (standard for CF8Mvalve bodies in all designsregardless of seat construction)S31600316 SST with ENCS31600S31600S3160037 and 37H(4)S31600 withseat and guide hard facedwith CoCr-A hardfacing alloy17-4 SST HTR30006 (alloy 6)------17-4 SST HT(6)------S3160057 (standard for PTFE-seatconstructions in all designs andvalve body materials except CF8M)S41600 alloy HT316LS31603316L SSTwith electrolessnickel coating (ENC)S31603---S31603316L HFS31603 withseat and guide hard facedwith CoCr-A hardfacing alloy316L SSTwith electrolessnickel coating (ENC)R30006 (alloy 6)---S31603 diskretainer withCoCr-A disk seat17-4 SST HT(6)1. CA15 is used for NPS 6 and 8 full-size and restricted-trim valves.2. Not for use with Whisper Trim I.3. Not for use with Whisper Trim I with 136.5 mm (5.375 inch) and larger ports.4. Trims 3H and 37H have clearance for high-temperature service.5. For trim 3, upper temperature limited to 316 C (600 F) when used for Whisper Trim I.6. For NPS 8 Whisper Trim I.7
Product BulletinES Valve51.1:ESOctober 2020D100021X012Table 5. Whisper Trim III Metal Trim Part Materials and Body/Trim Temperature erBaffle(ForLevel D3CageOnly)Seat RingforMetalSeatConstructionDisk nnet&BonnetSpacerMaterial Temperature Capability CMin FMaxMinMax19.1 through 111.1, 177.8 and 203.2 mm (0.75 through 4.375, 7 and 8 Inch) Port Sizes301G301GCS4160017-4 3-20650312GC(1)S31600/CoCr-ASeat 1)S31600/CoCr-ASeat &Guide316 -29--CF8M-198316-325600315GC(1)S31600/CoCr-ASeat &Guide316 at eat &GuideS31600/CoCr-ASeat &GuideWC92205Duplex(5)ChromePlate--S3180317-4 SST--Steel17-4 SST--SteelR30006S31803/CoCr-A( 3"Port),S31803/Ultimet( )S31600/CoCr-ASeat 7-4 SST306SteelS41600S41600S31803/CoCr-ASeat &Guide( 3"Port),S31803/UltimetSeat &Guide( 3"Port)--Steel
Product BulletinES Valve51.1:ESOctober 2020D100021X012Table 5. Whisper Trim III Metal Trim Part Materials and Body/Trim Temperature Capabilities 6 SSTCageRetainerWCC/ENCDisk SeatandRetainerforPTFE-SeatConstruction136.5 mm (5.375 Inch) PortBaffle(ForLevel D3CageOnly)Seat 0301 AS17400416 SSTWCC/NitridedSteelS41600--S31600301 CS17400416 SSTWCC/ENCSteel--S31600S31600304S31600/CoCr-ASeat &Guide416 SST312(1)S31600/CoCr-ASeat &Guide316 ckel Coated312C(1)S31600/CoCr-ASeat& Guide316 & 316/ENCElectrolessNickel CoatedS31600--R30006/S31600S20910316 e CoatS31600S31600/CoCr-ASeat &Guide2.25 Cr-1MoNitridedWC9 NitridedWC9S31803/UltimetSeat rial Temperature Capability C 593-201100WCC,WC9,CF8M-29316-20600S20910S318031. NACE compatible trims meets NACE MR0175 2002, MR0175/ISO15156, MR0103.2. May be used up to 593 C (1100 F). If manufacturing process controls carbon content to 0.04% minimum or 0.08% maximum.3. For high temperature service.4. Trim 318G uses S41000 stem up to 538 C (1000 F) and S42200 stem above 538 C (1000 F).5. 22 Cr-S Ni duplex stainless steel.6. Trim 315 uses S31600 stem up to 427 C (800 F) and S20910 stem above 427 C (800 F).7. Trim 301G can be used up to 216 C (420 F) with NPS 3 CF8M body, can be used up to 288 C (550 F) with NPS 2 CF8M body.8. For 8 inch port size, both disk seat and retainer use R30006.9
Product BulletinES Valve51.1:ESOctober 2020D100021X012Figure 2. Fisher EAS SectionalCAGE GASKETSHIMRESTRICTEDTRIMADAPTORBONNET GASKETLINERSPIRAL WOUND GASKETW0971-3STANDARD CONSTRUCTION WITH FULL-SIZED TRIM10W0970-3RESTRICTED-CAPACITY CONSTRUCTION WITH OPTIONAL LINER
Product BulletinES Valve51.1:ESOctober 2020D100021X012Table 6. Valve Body/Trim Temperature Capabilities for Metal Trim Parts OnlyBODY/BONNETMATERIAL (ALSOFOR BOTTOMFLANGE IF USED)TRIMDESIGNATIONCast iron body w/steel bonnet1, 3, 27, 29, 37, or 57VALVE SIZE AND 06501, 37, or 5
ring-type joint (RTJ) flanges per ASME B16.5, Raised-face (RF) flanges per EN1092-1/B Screwed or Socket Welding: NPS 1/2 through 2, consistent with ASME B16.11 Buttwelding: NPS 1 through 8 (except NPS 1-1/4). Schedules 40 or 80 consistent with ASME B16.25 Maximum Inlet Pressures and Temperat
the flow rate and pressure. To select the correct valve to fulfill these functions properly, an outline of the different types of valves and their features is given below. Butterfly valve Butterfly valve and globe valve Butterfly valve and ball valve Butterfly valve and gate valve Check valve Gate valve Globe valve Ball valve Valve shaped like a
G- Autoflow Valve 2.0 GPM H- Autoflow Valve 2.5 GPM I- Autoflow Valve 2.8 GPM J- Autoflow Valve 3.0 GPM K- Autoflow Valve 3.3 GPM L- Autoflow Valve 3.5 GPM M- Autoflow Valve 4.0 GPM N- Autoflow Valve 4.5 GPM O- Autoflow Valve 5.0 GPM P- Autoflow Valve 5.5 GPM Q- Autoflow Valve 6.0 GPM R- Autoflow Valve
4, 5 port pilot operated valve 4TB 5 port pilot operated valve (pneumatic valve) 4L2-4/LMFO 3, 4, 5 port pilot operated valve (pneumatic valve) 4KA/4KB 5 port pilot operated valve (pneumatic valve) 4F 5 port pilot operated valve (ISO conformed valve) PV5G/PV5/CMF 3 port direct acting valve (small pneumatic valve) 3MA0/3MB0
Generic two-way valve Straight globe valve Gate valve Generic two-way angle valve Angle globe valve Safety angle valve Generic three-way valve Three-way globe valve Arrow indicates failure or unactuated flow path a. b. Generic four-way valve Four-way four-ported plug or ball valve Arro
A- Balancing Valve B- Circuit Setter C- Autoflow Valve 0.5 GPM D- Autoflow Valve 1.0 GPM E- Autoflow Valve 1.3 GPM F- Autoflow Valve 1.5 GPM G- Autoflow Valve 2.0 GPM H- Autoflow Valve 2.5 GPM I- Autoflow Valve 2.8 GPM J- Autoflow Valve 3.0 GPM K- Autoflow Valve 3.3 GPM L-
» 2" Ball Valve - H2O2 Specification » 2" - Offshore Specification » 2" Full Bore Ball Valve - Gas » 80mm PFA Lined Flanged Ball Valve » 3" - 3" BSP Outlet » 3" - » 4" - Rail » Socket / In-Line Blacko Airline Ball Valve Blacko Airline Ball Valve Blacko Airline Ball Valve Blacko Airline Ball Valve Airline Valve Blacko Ball Valve
two position control valve temperature / pressure relief valve angle valve safety relief valve 3-way mixing valve 3-way diverting valve safety valve with drip pan elbow automatic air vent and shutoff valve manual air vent chain operated valve s m vb m-001 hvac legends & notes gwin engineering consultants, llc 1306 commerce drive, norman, ok 73071
1.0 Given an engineering print, READ and INTERPRET facility engineering Piping and Instrument Drawings. ENABLING OBJECTIVES 1.1 IDENTIFY the symbols used on engineering P&IDs for the following types of valves: a. Globe valve g. Relief valve b. Gate valve h. Rupture disk c. Ball valve i. Three-way valve d. Check valve j. Four-way valve e. Stop check valve k. Throttle (needle) valve f. Butterfly .
