Model Kss 213c For Ksm 213ccm Farnell Element14-PDF Free Download

MODEL KSS 213C FOR KSM 213CCM Farnell element14
23 Nov 2020 | 5 views | 0 downloads | 18 Pages | 200.20 KB

Share Pdf : Model Kss 213c For Ksm 213ccm Farnell Element14

Download and Preview : Model Kss 213c For Ksm 213ccm Farnell Element14

Report CopyRight/DMCA Form For : Model Kss 213c For Ksm 213ccm Farnell Element14



Transcription

Smartech Electronics and Machinery Manufacturing Co LTD Page 2 18. 1 Scope of Document, 2 Evaluation Conditions, 3 Absolute Maximum Rating. 4 Performance Specifications, 4 1 General, 4 2 Actuator. 4 3 Electrical characteristics, 5 Reliability Assurance. 5 1 Reliability Test Standard, 5 2 Reliability Specification. 6 Dimension, 7 Optical Structure, 8 Pin Connection.
9 APC Power Supply, 10 Standard evaluation circuit. 11 Precautions for handling, 12 Conformity of main parts to UL safety standards. 13 Semiconductor Laser, Smartech Electronics and Machinery Manufacturing Co LTD Page 3 18. 1 Scope of Document, This document describes the specification of optical pickup for use in compact disc players. including audio CD and Video CD, The contents of this specifications manual are subject to change for the purpose of.
improvement by prior discussion of both parties, If any disagreement should arise action will be taken to settle the matter upon discussion of. both parties based on the content of specifications manual. Within the range of these specifications parts are subject to change without notice for technical. improvement, 2 Evaluation Conditions, Measurements of basic performance specifications must be performed under the following. conditions, ITEM CONDITIONS, Position Emitting laser light from the horizontally placed objective lens is. to by Z axis direction, Environment The test should be taken at normal temperature and humidity If. any doubts arise take the test at a temperature of 20 25. and humidity of 50 5, Test Equipment PULSTECH made standard inspection equipment.
Model OPAS 1000A, Jitter Meter Meguro MJM 6318, Leader LJM 1851. APC power supply See chapter 9, Standard measurement circuit See chapter 10. Oscilloscope 100MHz, Evaluation disc SONY YEDS 18, A BEX TCD784. Note This document adopts SI unit, Smartech Electronics and Machinery Manufacturing Co LTD Page 4 18. 3 Absolute Maximum Rating, ITEM SPECIFICATIONS REMARKS.
Actuator coil Focusing coil 200mA RMS continuous 0mA for tracking coil. current Tracking coil 200mA RMS continuous 0mA for focus ing coil. Laser diode reverse voltage 2V Focusing, Monitor pin photo diode 30 V. reverse voltage, 6 segment photo diode 10 mA, forward current. Smartech Electronics and Machinery Manufacturing Co LTD Page 5 18. 4 Performance Specifications, 4 1 General, ITEM SPECIFICATION. Focus length f 3 86 mm, Lens Numerical aperture NA 0 45. Working distance WD 2 1 mm, Laser diode Laser wavelength 760 800 nm.
Servo error detect Focusing error Astigmatism method. method Tracking error 3 spot method, A positive voltage applied to Pin 13 of Actuator Laser diode. Direction of Lens, Focusing Direction, connector moves the objective lens toward disc. A positive voltage applied to pin 14 of Actuator Laser diode. Tracking Direction connector moves the objective lens toward the center of the. Dimension See chapter 6, Mechanical, Mass Weight 23 1 g. Moving mass of actuator 1 8g, Single power supply, Power supply voltage for LD. Electrical, PD signal output method Voltage output.
Smartech Electronics and Machinery Manufacturing Co LTD Page 6 18. 4 2 Actuator, ITEM REMARKS, TEMPERATURE, Movable distance 0 7 mm With respect to design center position. DC resistance 7 0 1, Sensitivity 1 6 0 6 mm V Specified at 5 Hz. Resonant frequency 20 4 Hz Specified at Maximum Q value. Q value 15 5 dB Q value Gain fo Gain 5Hz, Phase 1 KHz 195 7 deg. 5 KHz 224 7 deg, Movable distance 0 5 mm With respect to design center position. DC resistance 7 0 1, TR AC K IN G, Sensitivity 1 0 0 4 mm V Specified at 5 Hz.
Resonant frequency 18 4 Hz Specified at Maximum Q value. Q value 20 5 dB Q value Gain fo Gain 5Hz, 1 KHz 182 7 deg. 5 KHz 192 7 deg, Smartech Electronics and Machinery Manufacturing Co LTD Page 7 18. 4 3 Electrical characteristics, ITEM STANDARD REMARKS. TEMPERATURE, Level 1 0 0 2 Vp p APC temperature, characteristics exclude. Jitter Level 30ns Use a standard jitter measuring, Variation of RF The variation of RF signal envelope must be less than 30 when.
signal the objective lens moves 0 35mm, S curve 20 6 Vp p S curve p p 10 5 m. Focus bias at, Optimum jitter level, Focus Error Signal. Defocusing 1 m, defocus v2 v1 10 5 m, Polarity The focus error signal changes from minus to plus when the. objective lens approaches the disc, Amplitude 14 6 Vp p. Tracking Error Signal, E F balance 20, E F phase 60 deg.
Polarity When the laser spot is off track toward the center of the disc. tracking signal is defined as plus See Fig 4 3, Smartech Electronics and Machinery Manufacturing Co LTD Page 8 18. Smartech Electronics and Machinery Manufacturing Co LTD Page 9 18. 5 Reliability Assurance, 5 1 Reliability Test Standard. ITEM CONDITION TEST METHOD, Operating 5 to 55 C Leave the pick up in the idle state within this. Temperature temperature range for 4 hours Then age it for. 10 minutes at the same temperature and take, performance data. Do not allow condensation to form on the lens, and actuator.
Storage 30 to 60 C Leave the pickup at temperature in the above. Temperature range for 24 hours and then at room, temperature for over 16 hours Take. performance after aging, Do not let condensation form on the lens and. Storage in Hot and Temperature 60 C Leave the pickup at the above temperature and. Humid Conditions Humidity 90 humidity for 48 hours and then at room. temperature for over 16 hours After aging take, the performance data. Do not let condensation form on the lens and, Vibration Amplitude 2mm Subject the pickup to vibrations under the. Frequency 13 25Hz above conditions for 20 minutes in each. Sweep linear direction time for return sweep 1 minute. Directions 4 Then take the performance data, vertical and.
horizontal, Impact 80G Use impact test machine, three directions. Smartech Electronics and Machinery Manufacturing Co LTD Page 10 18. 5 2 Reliability Specifications, Deviations from initial value after reliability tests under the conditions specified. ITEM STANDARD VALUE, Focusing Sensitivity 20, Resonant frequency fo 2 Hz. Q value 3 dB, 1 KHz 5 deg, 5 KHz 7 deg, Tracking Sensitivity 20. Resonant frequency fo 2 Hz, Q value 3 dB, 1 KHz 5 deg.
5 KHz 7 deg, RF signal RF level 15, Jitter level 5 ns. Crosstalk 15, Focusing S curve amplitude, error signal Defocusing 1 m. Tracking Traverse 30, error signal E F balance 10, E F phase difference 30 deg. Service Life of After 3 000 hours operation at 25 C defective rate is under 0 1. Laser Diode excluding damage due to electrostatic discharge. Smartech Electronics and Machinery Manufacturing Co LTD Page 11 18. 6 Dimension, Smartech Electronics and Machinery Manufacturing Co LTD Page 12 18. 7 Optical Structure, COMPACT DISC, OBJECTIVE LENS, BEAM SPLITTER.
LASER DIODE, PHOTO DIODE, Smartech Electronics and Machinery Manufacturing Co LTD Page 13 18. 8 Pin connection, Pin No Name, 3 E 984375, 11 VR 1 7 9 11 15. 2 4 6 8 10 12 14 16, 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16. E D A B C F, Smartech Electronics and Machinery Manufacturing Co LTD Page 14 18. 9 APC Power Supply Reference, Smartech Electronics and Machinery Manufacturing Co LTD Page 15 18.
10 Standard evaluation circuit, 12V 22K 10K 22K, 10K IC1 150K IC8. 22K 10K 150P, B B 4 7K x 4 12V 12V, 200 33P x 2 470. 8 2K 33P 200P, D D 0 1u A B C D, IC4 2SA706, 33P x 2 RF. 100K 100K IC6, 940K 940K 220P E TE, 940K 220P F, IC1 4 LM6361. MODEL KSS 213C FOR KSM 213CCM 5 1 Reliability Test Standard 5 2 Reliability Specification 6 Dimension 7 Optical Structure 8 Pin Connection 9 APC Power Supply 10 Standard evaluation circuit 11 Precautions for handling 12 Conformity of main parts to UL safety standards 13 Semiconductor Laser Smartech Electronics and Machinery Manufacturing Co LTD Page 3 18 1 Scope of Document

Related Books

SOFTWARE KR C User Programming KUKA System Software KSS

SOFTWARE KR C User Programming KUKA System Software KSS

KUKA file manager Navigator If you wish to create a new program you must first create a so called skeleton program If on the other hand you wish to modify an existing program you simply need to select it or load it in the editor More detailed information on using the file manager may be found in the documentation

MODUL PENGEMBANGAN USAHA BAGI KSM EKONOMI

MODUL PENGEMBANGAN USAHA BAGI KSM EKONOMI

Hasil utama usaha ternak itik petelur adalah telur itik 2 Hasil Tambahan Hasil tambah berupa induk afkir itik jantan sebagai ternak daging dan kotoran

KOMPETISI SAINS MADRASAH KSM TINGKAT PROVINSI JAWA TIMUR

KOMPETISI SAINS MADRASAH KSM TINGKAT PROVINSI JAWA TIMUR

tingkat provinsi jawa timur tahun bidang pendidikan madrasah kantor wilayah kementerian agama biologi 5 ips 6 bahasa inggris 1 1 1 1 1 1 1 7 iii ma 1 pend

WINTER BACK TO SCHOOL CATALOG 2016 KSM Kulics Sales

WINTER BACK TO SCHOOL CATALOG 2016 KSM Kulics Sales

DESIGN COLORING Let your creativity run wild with these Dover coloring books filled with striking geometric and other designs there s no wrong way to color them Many of these mandala and other designs are coloring books for adults so they offer something special to colorists of all ages 024456943 MYSTICAL MANDALA 3 99 NET 2 15 024456420 PAISLEY DESIGNS 3 99 NET 2 15 024780333 OWLS3

Model Model model model model Evaluasi

Model Model model model model Evaluasi

Adanya beberapa ketidakserasian dengan peranan penilaian dalam proses pengembangan kurikulum sistem pendidikan berikut ini JURNAL PEMIKIRAN ALTERNATIF PENDIDIKAN P3M STAIN Purwokerto Rohmad Qomari 4 INSANIA Vol 13 No 2 Mei Ags 2008 173 188 1 Dalam pengembangan alat penilaian model ini banyak dipengaruhi oleh prosedur yang ditempuh dalam pengembangan tes psikologis antara lain tes

Model 4300 Model 7400 Model 7000XL Model 8000XL

Model 4300 Model 7400 Model 7000XL Model 8000XL

8 Introduction Introducing the Doran Scales Excel Series Model 7400 4300 7000XL 8000XL Digital Scale Indicator This scale uses state of the art technology to provide you with a low cost solution to the most demanding weighing applications With ease of use and setup in mind the scale is simple to set up and ready to use The Model 7400

Model 1100 Model 1200 Model 1400 Model 1700 QSC

Model 1100 Model 1200 Model 1400 Model 1700 QSC

have any service problems or questions not answered in this manual Your QSC Series One power amplifier can be readily operated by anyone familiar with professional audio systems The four models covered by this manual the 1100 1200 1400 and 1700 have similar features and connections Any differences will be covered in the following detailed instruction sections of this manual Because not

SERVICE MANUAL US Model Canadian Model AEP Model E Model

SERVICE MANUAL US Model Canadian Model AEP Model E Model

pear as shown in this manual or in supplements pub lished by sony attention au composant ayant rapport la s curit les composants identif s par une marque 0 sur les diagrammes sch matiques et la liste des pi ces sont critiques pour la s curit de fonctionnement ne remplacer ces composants que par des pi ses sony dont les num ros sont donn s dans ce manuel ou dans les

Chinese Model E Model Tourist Model RigPix

Chinese Model E Model Tourist Model RigPix

22 23 24 qa DISPLAY EXE button 13 15 16 Press to switch to clock display while operating the radio Press again to return to the previous display If you do not press the button the display will return to the previous condition in about 10 seconds qs SCAN button 24 qd PAGE button 22 24 qf MANUAL TUNE SCAN START STOP STANDBY TIME

929 6203 7 95 J Fits Model Year Model Year Model Year

929 6203 7 95 J Fits Model Year Model Year Model Year

Model Year Model Year Model Year Model Year BR 250 85 88 91 93 GS 340 77 78 BR 250 82 98 ET 300 77 88 EC340 81 84 PR 440 76 77 CS 340 89 98 ET 340 77 88 ET340 78 89 91 STX 340 76 79 EC 340 85 88 EX 570 87 90 EX 440 77 81 STX 440 76 79 ET 250 77 88 PZ 480 84 89 GP 433 75 77 78 TL 433 1975 929 6201 6 95 J OEM 8E3 47422 00 00 929 6203 7 95 J 8F3 47422 01 00 Extrovert Turbo Drive Sprockets The

FACTORY CAT MODEL 52 TOMCAT Model 5100 Industrial Rider

FACTORY CAT MODEL 52 TOMCAT Model 5100 Industrial Rider

TOMCAT Model 5100 Industrial Rider Scrubber PS 52 ENG 52 5100 T OMCAT FACTORY CAT MODEL 52 Safety Warnings Page 2 Short List of Do s and Don ts Page 4 OPERATING YOUR MACHINE Page 6 Identifying the Controls Page 7 How It Works Page 9 General Operating Instructions Page 10 Spray and vac wand Page 14 Recycling System Page 16 SPECIAL OPERATING TIPS Page 18 How to Scrub Page 19 MAINTAINING YOUR

Model 700 FS Model 900 FS

Model 700 FS Model 900 FS

10 1011127 Strain Relief Connector 1 11 1007130 Elec Connector Lock Nut 1 12 1035678 Elec Wire Seal Ring 1 13 1032179 Sandwich Sub Plate 1 1022120 Sub Plate with item 14 14 1022082 Sandwich Relief Valve 1 1022119 Cartridge Relief Valve 15 1050126 Pipe Elbow 2 16 1050462 Hex Pipe Nipple 4 inch 1 17 1050090 Hex Pipe Nipple 2 inch 1